/* $OpenBSD: cs4281.c,v 1.19 2005/11/29 05:42:17 tedu Exp $ */ /* $Tera: cs4281.c,v 1.18 2000/12/27 14:24:45 tacha Exp $ */ /* * Copyright (c) 2000 Tatoku Ogaito. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Tatoku Ogaito * for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Cirrus Logic CS4281 driver. * Data sheets can be found * http://www.cirrus.com/pubs/4281.pdf?DocumentID=30 * ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf * * TODO: * 1: midi and FM support */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define CSCC_PCI_BA0 0x10 #define CSCC_PCI_BA1 0x14 struct cs4281_dma { bus_dmamap_t map; caddr_t addr; /* real dma buffer */ caddr_t dum; /* dummy buffer for audio driver */ bus_dma_segment_t segs[1]; int nsegs; size_t size; struct cs4281_dma *next; }; #define DMAADDR(p) ((p)->map->dm_segs[0].ds_addr) #define BUFADDR(p) ((void *)((p)->dum)) #define KERNADDR(p) ((void *)((p)->addr)) /* * Software state */ struct cs4281_softc { struct device sc_dev; pci_intr_handle_t *sc_ih; /* I/O (BA0) */ bus_space_tag_t ba0t; bus_space_handle_t ba0h; /* BA1 */ bus_space_tag_t ba1t; bus_space_handle_t ba1h; /* DMA */ bus_dma_tag_t sc_dmatag; struct cs4281_dma *sc_dmas; size_t dma_size; size_t dma_align; int hw_blocksize; /* playback */ void (*sc_pintr)(void *); /* dma completion intr handler */ void *sc_parg; /* arg for sc_intr() */ char *sc_ps, *sc_pe, *sc_pn; int sc_pcount; int sc_pi; struct cs4281_dma *sc_pdma; char *sc_pbuf; int (*halt_output)(void *); #ifdef DIAGNOSTIC char sc_prun; #endif /* capturing */ void (*sc_rintr)(void *); /* dma completion intr handler */ void *sc_rarg; /* arg for sc_intr() */ char *sc_rs, *sc_re, *sc_rn; int sc_rcount; int sc_ri; struct cs4281_dma *sc_rdma; char *sc_rbuf; int sc_rparam; /* record format */ int (*halt_input)(void *); #ifdef DIAGNOSTIC char sc_rrun; #endif #if NMIDI > 0 void (*sc_iintr)(void *, int); /* midi input ready handler */ void (*sc_ointr)(void *); /* midi output ready handler */ void *sc_arg; #endif /* AC97 CODEC */ struct ac97_codec_if *codec_if; struct ac97_host_if host_if; /* Power Management */ char sc_suspend; void *sc_powerhook; /* Power hook */ u_int16_t ac97_reg[CS4281_SAVE_REG_MAX + 1]; /* Save ac97 registers */ }; #define BA0READ4(sc, r) bus_space_read_4((sc)->ba0t, (sc)->ba0h, (r)) #define BA0WRITE4(sc, r, x) bus_space_write_4((sc)->ba0t, (sc)->ba0h, (r), (x)) #if defined(ENABLE_SECONDARY_CODEC) #define MAX_CHANNELS (4) #define MAX_FIFO_SIZE 32 /* 128/4 channels */ #else #define MAX_CHANNELS (2) #define MAX_FIFO_SIZE 64 /* 128/2 channels */ #endif int cs4281_match(struct device *, void *, void *); void cs4281_attach(struct device *, struct device *, void *); int cs4281_intr(void *); int cs4281_query_encoding(void *, struct audio_encoding *); int cs4281_set_params(void *, int, int, struct audio_params *, struct audio_params *); int cs4281_halt_output(void *); int cs4281_halt_input(void *); int cs4281_getdev(void *, struct audio_device *); int cs4281_trigger_output(void *, void *, void *, int, void (*)(void *), void *, struct audio_params *); int cs4281_trigger_input(void *, void *, void *, int, void (*)(void *), void *, struct audio_params *); u_int8_t cs4281_sr2regval(int); void cs4281_set_dac_rate(struct cs4281_softc *, int); void cs4281_set_adc_rate(struct cs4281_softc *, int); int cs4281_init(struct cs4281_softc *); int cs4281_open(void *, int); void cs4281_close(void *); int cs4281_round_blocksize(void *, int); int cs4281_get_props(void *); int cs4281_attach_codec(void *, struct ac97_codec_if *); int cs4281_read_codec(void *, u_int8_t , u_int16_t *); int cs4281_write_codec(void *, u_int8_t, u_int16_t); void cs4281_reset_codec(void *); void cs4281_power(int, void *); int cs4281_mixer_set_port(void *, mixer_ctrl_t *); int cs4281_mixer_get_port(void *, mixer_ctrl_t *); int cs4281_query_devinfo(void *, mixer_devinfo_t *); void *cs4281_malloc(void *, int, size_t, int, int); size_t cs4281_round_buffersize(void *, int, size_t); void cs4281_free(void *, void *, int); paddr_t cs4281_mappage(void *, void *, off_t, int); int cs4281_allocmem(struct cs4281_softc *, size_t, int, int, struct cs4281_dma *); int cs4281_src_wait(struct cs4281_softc *); #if defined(CS4281_DEBUG) #undef DPRINTF #undef DPRINTFN #define DPRINTF(x) if (cs4281_debug) printf x #define DPRINTFN(n,x) if (cs4281_debug>(n)) printf x int cs4281_debug = 5; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif struct audio_hw_if cs4281_hw_if = { cs4281_open, cs4281_close, NULL, cs4281_query_encoding, cs4281_set_params, cs4281_round_blocksize, NULL, NULL, NULL, NULL, NULL, cs4281_halt_output, cs4281_halt_input, NULL, cs4281_getdev, NULL, cs4281_mixer_set_port, cs4281_mixer_get_port, cs4281_query_devinfo, cs4281_malloc, cs4281_free, cs4281_round_buffersize, NULL, /* cs4281_mappage, */ cs4281_get_props, cs4281_trigger_output, cs4281_trigger_input, }; #if NMIDI > 0 /* Midi Interface */ void cs4281_midi_close(void *); void cs4281_midi_getinfo(void *, struct midi_info *); int cs4281_midi_open(void *, int, void (*)(void *, int), void (*)(void *), void *); int cs4281_midi_output(void *, int); struct midi_hw_if cs4281_midi_hw_if = { cs4281_midi_open, cs4281_midi_close, cs4281_midi_output, cs4281_midi_getinfo, 0, }; #endif struct cfattach clct_ca = { sizeof(struct cs4281_softc), cs4281_match, cs4281_attach }; struct cfdriver clct_cd = { NULL, "clct", DV_DULL }; struct audio_device cs4281_device = { "CS4281", "", "cs4281" }; int cs4281_match(parent, match, aux) struct device *parent; void *match; void *aux; { struct pci_attach_args *pa = (struct pci_attach_args *)aux; if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS || PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_CIRRUS_CS4281) return (0); return (1); } void cs4281_attach(parent, self, aux) struct device *parent; struct device *self; void *aux; { struct cs4281_softc *sc = (struct cs4281_softc *)self; struct pci_attach_args *pa = (struct pci_attach_args *)aux; pci_chipset_tag_t pc = pa->pa_pc; char const *intrstr; pci_intr_handle_t ih; int pci_pwrmgmt_cap_reg, pci_pwrmgmt_csr_reg; /* Map I/O register */ if (pci_mapreg_map(pa, CSCC_PCI_BA0, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &sc->ba0t, &sc->ba0h, NULL, NULL, 0)) { printf("%s: can't map BA0 space\n", sc->sc_dev.dv_xname); return; } if (pci_mapreg_map(pa, CSCC_PCI_BA1, PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, &sc->ba1t, &sc->ba1h, NULL, NULL, 0)) { printf("%s: can't map BA1 space\n", sc->sc_dev.dv_xname); return; } sc->sc_dmatag = pa->pa_dmat; /* * Set Power State D0. * Without doing this, 0xffffffff is read from all registers after * using Windows and rebooting into OpenBSD. * On my IBM ThinkPad X20, it is set to D3 after using Windows2000. */ if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pci_pwrmgmt_cap_reg, 0)) { pcireg_t reg; pci_pwrmgmt_csr_reg = pci_pwrmgmt_cap_reg + PCI_PMCSR; reg = pci_conf_read(pa->pa_pc, pa->pa_tag, pci_pwrmgmt_csr_reg); if ((reg & PCI_PMCSR_STATE_MASK) != PCI_PMCSR_STATE_D0) { pci_conf_write(pc, pa->pa_tag, pci_pwrmgmt_csr_reg, (reg & ~PCI_PMCSR_STATE_MASK) | PCI_PMCSR_STATE_D0); } } /* Map and establish the interrupt. */ if (pci_intr_map(pa, &ih)) { printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, cs4281_intr, sc, sc->sc_dev.dv_xname); if (sc->sc_ih == NULL) { printf("%s: couldn't establish interrupt",sc->sc_dev.dv_xname); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf(" %s\n", intrstr); /* * Sound System start-up */ if (cs4281_init(sc) != 0) return; sc->halt_input = cs4281_halt_input; sc->halt_output = cs4281_halt_output; sc->dma_size = CS4281_BUFFER_SIZE / MAX_CHANNELS; sc->dma_align = 0x10; sc->hw_blocksize = sc->dma_size / 2; /* AC 97 attachment */ sc->host_if.arg = sc; sc->host_if.attach = cs4281_attach_codec; sc->host_if.read = cs4281_read_codec; sc->host_if.write = cs4281_write_codec; sc->host_if.reset = cs4281_reset_codec; if (ac97_attach(&sc->host_if) != 0) { printf("%s: ac97_attach failed\n", sc->sc_dev.dv_xname); return; } audio_attach_mi(&cs4281_hw_if, sc, &sc->sc_dev); #if NMIDI > 0 midi_attach_mi(&cs4281_midi_hw_if, sc, &sc->sc_dev); #endif sc->sc_suspend = PWR_RESUME; sc->sc_powerhook = powerhook_establish(cs4281_power, sc); } int cs4281_intr(p) void *p; { struct cs4281_softc *sc = p; u_int32_t intr, val; char *empty_dma; intr = BA0READ4(sc, CS4281_HISR); if (!(intr & (HISR_DMA0 | HISR_DMA1 | HISR_MIDI))) { BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); return (0); } DPRINTF(("cs4281_intr:")); if (intr & HISR_DMA0) val = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */ if (intr & HISR_DMA1) val = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */ BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); /* Playback Interrupt */ if (intr & HISR_DMA0) { DPRINTF((" PB DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA0), (int)BA0READ4(sc, CS4281_DCC0))); if (sc->sc_pintr) { if ((sc->sc_pi%sc->sc_pcount) == 0) sc->sc_pintr(sc->sc_parg); } else { printf("unexpected play intr\n"); } /* copy buffer */ ++sc->sc_pi; empty_dma = sc->sc_pdma->addr; if (sc->sc_pi&1) empty_dma += sc->hw_blocksize; memcpy(empty_dma, sc->sc_pn, sc->hw_blocksize); sc->sc_pn += sc->hw_blocksize; if (sc->sc_pn >= sc->sc_pe) sc->sc_pn = sc->sc_ps; } if (intr & HISR_DMA1) { val = BA0READ4(sc, CS4281_HDSR1); /* copy from dma */ DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1), (int)BA0READ4(sc, CS4281_DCC1))); ++sc->sc_ri; empty_dma = sc->sc_rdma->addr; if ((sc->sc_ri & 1) == 0) empty_dma += sc->hw_blocksize; memcpy(sc->sc_rn, empty_dma, sc->hw_blocksize); if (sc->sc_rn >= sc->sc_re) sc->sc_rn = sc->sc_rs; if (sc->sc_rintr) { if ((sc->sc_ri % sc->sc_rcount) == 0) sc->sc_rintr(sc->sc_rarg); } else { printf("unexpected record intr\n"); } } DPRINTF(("\n")); return (1); } int cs4281_query_encoding(addr, fp) void *addr; struct audio_encoding *fp; { switch (fp->index) { case 0: strlcpy(fp->name, AudioEulinear, sizeof fp->name); fp->encoding = AUDIO_ENCODING_ULINEAR; fp->precision = 8; fp->flags = 0; break; case 1: strlcpy(fp->name, AudioEmulaw, sizeof fp->name); fp->encoding = AUDIO_ENCODING_ULAW; fp->precision = 8; fp->flags = AUDIO_ENCODINGFLAG_EMULATED; break; case 2: strlcpy(fp->name, AudioEalaw, sizeof fp->name); fp->encoding = AUDIO_ENCODING_ALAW; fp->precision = 8; fp->flags = AUDIO_ENCODINGFLAG_EMULATED; break; case 3: strlcpy(fp->name, AudioEslinear, sizeof fp->name); fp->encoding = AUDIO_ENCODING_SLINEAR; fp->precision = 8; fp->flags = 0; break; case 4: strlcpy(fp->name, AudioEslinear_le, sizeof fp->name); fp->encoding = AUDIO_ENCODING_SLINEAR_LE; fp->precision = 16; fp->flags = 0; break; case 5: strlcpy(fp->name, AudioEulinear_le, sizeof fp->name); fp->encoding = AUDIO_ENCODING_ULINEAR_LE; fp->precision = 16; fp->flags = 0; break; case 6: strlcpy(fp->name, AudioEslinear_be, sizeof fp->name); fp->encoding = AUDIO_ENCODING_SLINEAR_BE; fp->precision = 16; fp->flags = 0; break; case 7: strlcpy(fp->name, AudioEulinear_be, sizeof fp->name); fp->encoding = AUDIO_ENCODING_ULINEAR_BE; fp->precision = 16; fp->flags = 0; break; default: return EINVAL; } return (0); } int cs4281_set_params(addr, setmode, usemode, play, rec) void *addr; int setmode, usemode; struct audio_params *play, *rec; { struct cs4281_softc *sc = addr; struct audio_params *p; int mode; for (mode = AUMODE_RECORD; mode != -1; mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) { if ((setmode & mode) == 0) continue; p = mode == AUMODE_PLAY ? play : rec; if (p == play) { DPRINTFN(5,("play: samp=%ld precision=%d channels=%d\n", p->sample_rate, p->precision, p->channels)); if (p->sample_rate < 6023 || p->sample_rate > 48000 || (p->precision != 8 && p->precision != 16) || (p->channels != 1 && p->channels != 2)) { return (EINVAL); } } else { DPRINTFN(5,("rec: samp=%ld precision=%d channels=%d\n", p->sample_rate, p->precision, p->channels)); if (p->sample_rate < 6023 || p->sample_rate > 48000 || (p->precision != 8 && p->precision != 16) || (p->channels != 1 && p->channels != 2)) { return (EINVAL); } } p->factor = 1; p->sw_code = 0; switch (p->encoding) { case AUDIO_ENCODING_SLINEAR_BE: break; case AUDIO_ENCODING_SLINEAR_LE: break; case AUDIO_ENCODING_ULINEAR_BE: break; case AUDIO_ENCODING_ULINEAR_LE: break; case AUDIO_ENCODING_ULAW: if (mode == AUMODE_PLAY) { p->sw_code = mulaw_to_slinear8; } else { p->sw_code = slinear8_to_mulaw; } break; case AUDIO_ENCODING_ALAW: if (mode == AUMODE_PLAY) { p->sw_code = alaw_to_slinear8; } else { p->sw_code = slinear8_to_alaw; } break; default: return (EINVAL); } } /* set sample rate */ cs4281_set_dac_rate(sc, play->sample_rate); cs4281_set_adc_rate(sc, rec->sample_rate); return (0); } int cs4281_halt_output(addr) void *addr; { struct cs4281_softc *sc = addr; BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); #ifdef DIAGNOSTIC sc->sc_prun = 0; #endif return (0); } int cs4281_halt_input(addr) void *addr; { struct cs4281_softc *sc = addr; BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); #ifdef DIAGNOSTIC sc->sc_rrun = 0; #endif return (0); } /* trivial */ int cs4281_getdev(addr, retp) void *addr; struct audio_device *retp; { *retp = cs4281_device; return (0); } int cs4281_trigger_output(addr, start, end, blksize, intr, arg, param) void *addr; void *start, *end; int blksize; void (*intr)(void *); void *arg; struct audio_params *param; { struct cs4281_softc *sc = addr; u_int32_t fmt=0; struct cs4281_dma *p; int dma_count; #ifdef DIAGNOSTIC if (sc->sc_prun) printf("cs4281_trigger_output: already running\n"); sc->sc_prun = 1; #endif DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p " "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); sc->sc_pintr = intr; sc->sc_parg = arg; /* stop playback DMA */ BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); DPRINTF(("param: precision=%d factor=%d channels=%d encoding=%d\n", param->precision, param->factor, param->channels, param->encoding)); for (p = sc->sc_dmas; p != NULL && BUFADDR(p) != start; p = p->next) ; if (p == NULL) { printf("cs4281_trigger_output: bad addr %p\n", start); return (EINVAL); } sc->sc_pcount = blksize / sc->hw_blocksize; sc->sc_ps = (char *)start; sc->sc_pe = (char *)end; sc->sc_pdma = p; sc->sc_pbuf = KERNADDR(p); sc->sc_pi = 0; sc->sc_pn = sc->sc_ps; if (blksize >= sc->dma_size) { sc->sc_pn = sc->sc_ps + sc->dma_size; memcpy(sc->sc_pbuf, start, sc->dma_size); ++sc->sc_pi; } else { sc->sc_pn = sc->sc_ps + sc->hw_blocksize; memcpy(sc->sc_pbuf, start, sc->hw_blocksize); } dma_count = sc->dma_size; if (param->precision * param->factor != 8) dma_count /= 2; /* 16 bit */ if (param->channels > 1) dma_count /= 2; /* Stereo */ DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n", (int)DMAADDR(p), dma_count)); BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p)); BA0WRITE4(sc, CS4281_DBC0, dma_count-1); /* set playback format */ fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK; if (param->precision * param->factor == 8) fmt |= DMRn_SIZE8; if (param->channels == 1) fmt |= DMRn_MONO; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_SLINEAR_BE) fmt |= DMRn_BEND; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_ULINEAR_LE) fmt |= DMRn_USIGN; BA0WRITE4(sc, CS4281_DMR0, fmt); /* set sample rate */ cs4281_set_dac_rate(sc, param->sample_rate); /* start DMA */ BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK); /* Enable interrupts */ BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); BA0WRITE4(sc, CS4281_PPRVC, 7); BA0WRITE4(sc, CS4281_PPLVC, 7); DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR))); DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR))); DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0))); DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0))); DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0))); DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n", BA0READ4(sc, CS4281_DACSR))); DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA))); DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n", BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN)); return (0); } int cs4281_trigger_input(addr, start, end, blksize, intr, arg, param) void *addr; void *start, *end; int blksize; void (*intr)(void *); void *arg; struct audio_params *param; { struct cs4281_softc *sc = addr; struct cs4281_dma *p; u_int32_t fmt=0; int dma_count; printf("cs4281_trigger_input: not implemented yet\n"); #ifdef DIAGNOSTIC if (sc->sc_rrun) printf("cs4281_trigger_input: already running\n"); sc->sc_rrun = 1; #endif DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p " "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); sc->sc_rintr = intr; sc->sc_rarg = arg; /* stop recording DMA */ BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); for (p = sc->sc_dmas; p && BUFADDR(p) != start; p = p->next) ; if (!p) { printf("cs4281_trigger_input: bad addr %p\n", start); return (EINVAL); } sc->sc_rcount = blksize / sc->hw_blocksize; sc->sc_rs = (char *)start; sc->sc_re = (char *)end; sc->sc_rdma = p; sc->sc_rbuf = KERNADDR(p); sc->sc_ri = 0; sc->sc_rn = sc->sc_rs; dma_count = sc->dma_size; if (param->precision * param->factor == 8) dma_count /= 2; if (param->channels > 1) dma_count /= 2; DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n", (int)DMAADDR(p), dma_count)); BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p)); BA0WRITE4(sc, CS4281_DBC1, dma_count-1); /* set recording format */ fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK; if (param->precision * param->factor == 8) fmt |= DMRn_SIZE8; if (param->channels == 1) fmt |= DMRn_MONO; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_SLINEAR_BE) fmt |= DMRn_BEND; if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || param->encoding == AUDIO_ENCODING_ULINEAR_LE) fmt |= DMRn_USIGN; BA0WRITE4(sc, CS4281_DMR1, fmt); /* set sample rate */ cs4281_set_adc_rate(sc, param->sample_rate); /* Start DMA */ BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK); /* Enable interrupts */ BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR))); DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR))); DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1))); DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1))); return (0); } /* convert sample rate to register value */ u_int8_t cs4281_sr2regval(rate) int rate; { u_int8_t retval; /* We don't have to change here. but anyway ... */ if (rate > 48000) rate = 48000; if (rate < 6023) rate = 6023; switch (rate) { case 8000: retval = 5; break; case 11025: retval = 4; break; case 16000: retval = 3; break; case 22050: retval = 2; break; case 44100: retval = 1; break; case 48000: retval = 0; break; default: retval = 1536000/rate; /* == 24576000/(rate*16) */ } return (retval); } void cs4281_set_dac_rate(sc, rate) struct cs4281_softc *sc; int rate; { BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate)); } void cs4281_set_adc_rate(sc, rate) struct cs4281_softc *sc; int rate; { BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate)); } int cs4281_init(sc) struct cs4281_softc *sc; { int n; u_int16_t data; u_int32_t dat32; /* set "Configuration Write Protect" register to * 0x4281 to allow to write */ BA0WRITE4(sc, CS4281_CWPR, 0x4281); /* * Unset "Full Power-Down bit of Extended PCI Power Management * Control" register to release the reset state. */ dat32 = BA0READ4(sc, CS4281_EPPMC); if (dat32 & EPPMC_FPDN) BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN); /* Start PLL out in known state */ BA0WRITE4(sc, CS4281_CLKCR1, 0); /* Start serial ports out in known state */ BA0WRITE4(sc, CS4281_SERMC, 0); /* Reset codec */ BA0WRITE4(sc, CS4281_ACCTL, 0); delay(50); /* delay 50us */ BA0WRITE4(sc, CS4281_SPMC, 0); delay(100); /* delay 100us */ BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); #if defined(ENABLE_SECONDARY_CODEC) BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); #endif delay(50000); /* XXX: delay 50ms */ /* Turn on Sound System clocks based on ABITCLK */ BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP); delay(50000); /* XXX: delay 50ms */ BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP); /* Set enables for sections that are needed in the SSPM registers */ BA0WRITE4(sc, CS4281_SSPM, SSPM_MIXEN | /* Mixer */ SSPM_CSRCEN | /* Capture SRC */ SSPM_PSRCEN | /* Playback SRC */ SSPM_JSEN | /* Joystick */ SSPM_ACLEN | /* AC LINK */ SSPM_FMEN /* FM */ ); /* Wait for clock stabilization */ n = 0; while ((BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON)) != (CLKCR1_DLLRDY | CLKCR1_CLKON)) { delay(100); if (++n > 1000) return (-1); } /* Enable ASYNC generation */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN); /* Wait for Codec ready. Linux driver wait 50ms here */ n = 0; while((BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY) == 0) { delay(100); if (++n > 1000) return (-1); } #if defined(ENABLE_SECONDARY_CODEC) /* secondary codec ready*/ n = 0; while((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { delay(100); if (++n > 1000) return (-1); } #endif /* Set the serial timing configuration */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait for Codec ready signal */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for Codec ready\n", sc->sc_dev.dv_xname); return -1; } dat32 = BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY; } while (dat32 == 0); /* Enable Valid Frame output on ASDOUT */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN | ACCTL_VFRM); /* Wait until Codec Calibration is finished. Codec register 26h */ n = 0; do { delay(1); if (++n > 1000) { printf("%s: Timeout waiting for Codec calibration\n", sc->sc_dev.dv_xname); return -1; } cs4281_read_codec(sc, AC97_REG_POWER, &data); } while ((data & 0x0f) != 0x0f); /* Set the serial timing configuration again */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait until we've sampled input slots 3 & 4 as valid */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for sampled input slots as valid\n", sc->sc_dev.dv_xname); return -1; } dat32 = BA0READ4(sc, CS4281_ACISV) & (ACISV_ISV3 | ACISV_ISV4); } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); /* Start digital data transfer of audio data to the codec */ BA0WRITE4(sc, CS4281_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); cs4281_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0); cs4281_write_codec(sc, AC97_REG_MASTER_VOLUME, 0); /* Power on the DAC */ cs4281_read_codec(sc, AC97_REG_POWER, &data); cs4281_write_codec(sc, AC97_REG_POWER, data &= 0xfdff); /* Wait until we sample a DAC ready state. * Not documented, but Linux driver does. */ for (n = 0; n < 32; ++n) { delay(1000); cs4281_read_codec(sc, AC97_REG_POWER, &data); if (data & 0x02) break; } /* Power on the ADC */ cs4281_read_codec(sc, AC97_REG_POWER, &data); cs4281_write_codec(sc, AC97_REG_POWER, data &= 0xfeff); /* Wait until we sample ADC ready state. * Not documented, but Linux driver does. */ for (n = 0; n < 32; ++n) { delay(1000); cs4281_read_codec(sc, AC97_REG_POWER, &data); if (data & 0x01) break; } #if 0 /* Initialize SSCR register features */ /* XXX: hardware volume setting */ BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */ #endif /* disable Sound Blaster Pro emulation */ /* XXX: * Cannot set since the documents does not describe which bit is * correspond to SSCR_SB. Since the reset value of SSCR is 0, * we can ignore it.*/ #if 0 BA0WRITE4(sc, CS4281_SSCR, SSCR_SB); #endif /* map AC97 PCM playback to DMA Channel 0 */ /* Reset FEN bit to setup first */ BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc,CS4281_FCR0) & ~FCRn_FEN)); /* *| RS[4:0]/| | *| LS[4:0] | AC97 | Slot Function *|---------+--------+-------------------- *| 0 | 3 | Left PCM Playback *| 1 | 4 | Right PCM Playback *| 2 | 5 | Phone Line 1 DAC *| 3 | 6 | Center PCM Playback *.... * quoted from Table 29(p109) */ dat32 = 0x01 << 24 | /* RS[4:0] = 1 see above */ 0x00 << 16 | /* LS[4:0] = 0 see above */ 0x0f << 8 | /* SZ[6:0] = 15 size of buffer */ 0x00 << 0 ; /* OF[6:0] = 0 offset */ BA0WRITE4(sc, CS4281_FCR0, dat32); BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN); /* map AC97 PCM record to DMA Channel 1 */ /* Reset FEN bit to setup first */ BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc,CS4281_FCR1) & ~FCRn_FEN)); /* *| RS[4:0]/| *| LS[4:0] | AC97 | Slot Function *|---------+------+------------------- *| 10 | 3 | Left PCM Record *| 11 | 4 | Right PCM Record *| 12 | 5 | Phone Line 1 ADC *| 13 | 6 | Mic ADC *.... * quoted from Table 30(p109) */ dat32 = 0x0b << 24 | /* RS[4:0] = 11 See above */ 0x0a << 16 | /* LS[4:0] = 10 See above */ 0x0f << 8 | /* SZ[6:0] = 15 Size of buffer */ 0x10 << 0 ; /* OF[6:0] = 16 offset */ /* XXX: I cannot understand why FCRn_PSH is needed here. */ BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH); BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN); #if 0 /* Disable DMA Channel 2, 3 */ BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc,CS4281_FCR2) & ~FCRn_FEN)); BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc,CS4281_FCR3) & ~FCRn_FEN)); #endif /* Set the SRC Slot Assignment accordingly */ /*| PLSS[4:0]/ *| PRSS[4:0] | AC97 | Slot Function *|-----------+------+---------------- *| 0 | 3 | Left PCM Playback *| 1 | 4 | Right PCM Playback *| 2 | 5 | phone line 1 DAC *| 3 | 6 | Center PCM Playback *| 4 | 7 | Left Surround PCM Playback *| 5 | 8 | Right Surround PCM Playback *...... * *| CLSS[4:0]/ *| CRSS[4:0] | AC97 | Codec |Slot Function *|-----------+------+-------+----------------- *| 10 | 3 |Primary| Left PCM Record *| 11 | 4 |Primary| Right PCM Record *| 12 | 5 |Primary| Phone Line 1 ADC *| 13 | 6 |Primary| Mic ADC *|..... *| 20 | 3 | Sec. | Left PCM Record *| 21 | 4 | Sec. | Right PCM Record *| 22 | 5 | Sec. | Phone Line 1 ADC *| 23 | 6 | Sec. | Mic ADC */ dat32 = 0x0b << 24 | /* CRSS[4:0] Right PCM Record(primary) */ 0x0a << 16 | /* CLSS[4:0] Left PCM Record(primary) */ 0x01 << 8 | /* PRSS[4:0] Right PCM Playback */ 0x00 << 0; /* PLSS[4:0] Left PCM Playback */ BA0WRITE4(sc, CS4281_SRCSA, dat32); /* Set interrupt to occurred at Half and Full terminal * count interrupt enable for DMA channel 0 and 1. * To keep DMA stop, set MSK. */ dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK; BA0WRITE4(sc, CS4281_DCR0, dat32); BA0WRITE4(sc, CS4281_DCR1, dat32); /* Set Auto-Initialize Control enable */ BA0WRITE4(sc, CS4281_DMR0, DMRn_DMA | DMRn_AUTO | DMRn_TR_READ); BA0WRITE4(sc, CS4281_DMR1, DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE); /* Clear DMA Mask in HIMR */ dat32 = BA0READ4(sc, CS4281_HIMR) & 0xfffbfcff; BA0WRITE4(sc, CS4281_HIMR, dat32); return (0); } void cs4281_power(why, v) int why; void *v; { struct cs4281_softc *sc = (struct cs4281_softc *)v; int i; DPRINTF(("%s: cs4281_power why=%d\n", sc->sc_dev.dv_xname, why)); if (why != PWR_RESUME) { sc->sc_suspend = why; cs4281_halt_output(sc); cs4281_halt_input(sc); /* Save AC97 registers */ for (i = 1; i <= CS4281_SAVE_REG_MAX; i++) { if (i == 0x04) /* AC97_REG_MASTER_TONE */ continue; cs4281_read_codec(sc, 2*i, &sc->ac97_reg[i>>1]); } /* should I powerdown here ? */ cs4281_write_codec(sc, AC97_REG_POWER, CS4281_POWER_DOWN_ALL); } else { if (sc->sc_suspend == PWR_RESUME) { printf("cs4281_power: odd, resume without suspend.\n"); sc->sc_suspend = why; return; } sc->sc_suspend = why; cs4281_init(sc); cs4281_reset_codec(sc); /* restore ac97 registers */ for (i = 1; i <= CS4281_SAVE_REG_MAX; i++) { if (i == 0x04) /* AC97_REG_MASTER_TONE */ continue; cs4281_write_codec(sc, 2*i, sc->ac97_reg[i>>1]); } } } void cs4281_reset_codec(void *addr) { struct cs4281_softc *sc; u_int16_t data; u_int32_t dat32; int n; sc = addr; DPRINTFN(3,("cs4281_reset_codec\n")); /* Reset codec */ BA0WRITE4(sc, CS4281_ACCTL, 0); delay(50); /* delay 50us */ BA0WRITE4(sc, CS4281_SPMC, 0); delay(100); /* delay 100us */ BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); #if defined(ENABLE_SECONDARY_CODEC) BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); #endif delay(50000); /* XXX: delay 50ms */ /* Enable ASYNC generation */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN); /* Wait for Codec ready. Linux driver wait 50ms here */ n = 0; while((BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY) == 0) { delay(100); if (++n > 1000) { printf("reset_codec: AC97 codec ready timeout\n"); return; } } #if defined(ENABLE_SECONDARY_CODEC) /* secondary codec ready*/ n = 0; while((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { delay(100); if (++n > 1000) return; } #endif /* Set the serial timing configuration */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait for Codec ready signal */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for Codec ready\n", sc->sc_dev.dv_xname); return; } dat32 = BA0READ4(sc, CS4281_ACSTS) & ACSTS_CRDY; } while (dat32 == 0); /* Enable Valid Frame output on ASDOUT */ BA0WRITE4(sc, CS4281_ACCTL, ACCTL_ESYN | ACCTL_VFRM); /* Wait until Codec Calibration is finished. Codec register 26h */ n = 0; do { delay(1); if (++n > 1000) { printf("%s: Timeout waiting for Codec calibration\n", sc->sc_dev.dv_xname); return ; } cs4281_read_codec(sc, AC97_REG_POWER, &data); } while ((data & 0x0f) != 0x0f); /* Set the serial timing configuration again */ /* XXX: undocumented but the Linux driver do this */ BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); /* Wait until we've sampled input slots 3 & 4 as valid */ n = 0; do { delay(1000); if (++n > 1000) { printf("%s: Timeout waiting for sampled input slots as valid\n", sc->sc_dev.dv_xname); return; } dat32 = BA0READ4(sc, CS4281_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ; } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); /* Start digital data transfer of audio data to the codec */ BA0WRITE4(sc, CS4281_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); } int cs4281_open(void *addr, int flags) { return (0); } void cs4281_close(void *addr) { struct cs4281_softc *sc; sc = addr; (*sc->halt_output)(sc); (*sc->halt_input)(sc); sc->sc_pintr = 0; sc->sc_rintr = 0; } int cs4281_round_blocksize(void *addr, int blk) { struct cs4281_softc *sc; int retval; DPRINTFN(5,("cs4281_round_blocksize blk=%d -> ", blk)); sc=addr; if (blk < sc->hw_blocksize) retval = sc->hw_blocksize; else retval = blk & -(sc->hw_blocksize); DPRINTFN(5,("%d\n", retval)); return (retval); } int cs4281_mixer_set_port(void *addr, mixer_ctrl_t *cp) { struct cs4281_softc *sc; int val; sc = addr; val = sc->codec_if->vtbl->mixer_set_port(sc->codec_if, cp); DPRINTFN(3,("mixer_set_port: val=%d\n", val)); return (val); } int cs4281_mixer_get_port(void *addr, mixer_ctrl_t *cp) { struct cs4281_softc *sc; sc = addr; return (sc->codec_if->vtbl->mixer_get_port(sc->codec_if, cp)); } int cs4281_query_devinfo(void *addr, mixer_devinfo_t *dip) { struct cs4281_softc *sc; sc = addr; return (sc->codec_if->vtbl->query_devinfo(sc->codec_if, dip)); } void * cs4281_malloc(void *addr, int direction, size_t size, int pool, int flags) { struct cs4281_softc *sc; struct cs4281_dma *p; int error; sc = addr; p = malloc(sizeof(*p), pool, flags); if (!p) return (0); error = cs4281_allocmem(sc, size, pool, flags, p); if (error) { free(p, pool); return (0); } p->next = sc->sc_dmas; sc->sc_dmas = p; return (BUFADDR(p)); } void cs4281_free(void *addr, void *ptr, int pool) { struct cs4281_softc *sc; struct cs4281_dma **pp, *p; sc = addr; for (pp = &sc->sc_dmas; (p = *pp) != NULL; pp = &p->next) { if (BUFADDR(p) == ptr) { bus_dmamap_unload(sc->sc_dmatag, p->map); bus_dmamap_destroy(sc->sc_dmatag, p->map); bus_dmamem_unmap(sc->sc_dmatag, p->addr, p->size); bus_dmamem_free(sc->sc_dmatag, p->segs, p->nsegs); free(p->dum, pool); *pp = p->next; free(p, pool); return; } } } size_t cs4281_round_buffersize(void *addr, int direction, size_t size) { /* The real dma buffersize are 4KB for CS4280 * and 64kB/MAX_CHANNELS for CS4281. * But they are too small for high quality audio, * let the upper layer(audio) use a larger buffer. * (originally suggested by Lennart Augustsson.) */ return (size); } paddr_t cs4281_mappage(void *addr, void *mem, off_t off, int prot) { struct cs4281_softc *sc; struct cs4281_dma *p; sc = addr; if (off < 0) return -1; for (p = sc->sc_dmas; p && BUFADDR(p) != mem; p = p->next) ; if (!p) { DPRINTF(("cs4281_mappage: bad buffer address\n")); return (-1); } return (bus_dmamem_mmap(sc->sc_dmatag, p->segs, p->nsegs, off, prot, BUS_DMA_WAITOK)); } int cs4281_get_props(void *addr) { int retval; retval = AUDIO_PROP_INDEPENDENT | AUDIO_PROP_FULLDUPLEX; #ifdef MMAP_READY retval |= AUDIO_PROP_MMAP; #endif return (retval); } /* AC97 */ int cs4281_attach_codec(void *addr, struct ac97_codec_if *codec_if) { struct cs4281_softc *sc; DPRINTF(("cs4281_attach_codec:\n")); sc = addr; sc->codec_if = codec_if; return (0); } int cs4281_read_codec(void *addr, u_int8_t ac97_addr, u_int16_t *ac97_data) { struct cs4281_softc *sc; u_int32_t acctl; int n; sc = addr; DPRINTFN(5,("read_codec: add=0x%02x ", ac97_addr)); /* * Make sure that there is not data sitting around from a preivous * uncompleted access. */ BA0READ4(sc, CS4281_ACSDA); /* Set up AC97 control registers. */ BA0WRITE4(sc, CS4281_ACCAD, ac97_addr); BA0WRITE4(sc, CS4281_ACCDA, 0); acctl = ACCTL_ESYN | ACCTL_VFRM | ACCTL_CRW | ACCTL_DCV; BA0WRITE4(sc, CS4281_ACCTL, acctl); if (cs4281_src_wait(sc) < 0) { printf("%s: AC97 read prob. (DCV!=0) for add=0x%0x\n", sc->sc_dev.dv_xname, ac97_addr); return 1; } /* wait for valid status bit is active */ n = 0; while ((BA0READ4(sc, CS4281_ACSTS) & ACSTS_VSTS) == 0) { delay(1); while (++n > 1000) { printf("%s: AC97 read fail (VSTS==0) for add=0x%0x\n", sc->sc_dev.dv_xname, ac97_addr); return 1; } } *ac97_data = BA0READ4(sc, CS4281_ACSDA); DPRINTFN(5,("data=0x%04x\n", *ac97_data)); return (0); } int cs4281_write_codec(void *addr, u_int8_t ac97_addr, u_int16_t ac97_data) { struct cs4281_softc *sc; u_int32_t acctl; sc = addr; DPRINTFN(5,("write_codec: add=0x%02x data=0x%04x\n", ac97_addr, ac97_data)); BA0WRITE4(sc, CS4281_ACCAD, ac97_addr); BA0WRITE4(sc, CS4281_ACCDA, ac97_data); acctl = ACCTL_ESYN | ACCTL_VFRM | ACCTL_DCV; BA0WRITE4(sc, CS4281_ACCTL, acctl); if (cs4281_src_wait(sc) < 0) { printf("%s: AC97 write fail (DCV!=0) for add=0x%02x data=" "0x%04x\n", sc->sc_dev.dv_xname, ac97_addr, ac97_data); return (1); } return (0); } int cs4281_allocmem(struct cs4281_softc *sc, size_t size, int pool, int flags, struct cs4281_dma *p) { int error; size_t align; align = sc->dma_align; p->size = sc->dma_size; /* allocate memory for upper audio driver */ p->dum = malloc(size, pool, flags); if (!p->dum) return (1); error = bus_dmamem_alloc(sc->sc_dmatag, p->size, align, 0, p->segs, sizeof(p->segs)/sizeof(p->segs[0]), &p->nsegs, BUS_DMA_NOWAIT); if (error) { printf("%s: unable to allocate dma. error=%d\n", sc->sc_dev.dv_xname, error); return (error); } error = bus_dmamem_map(sc->sc_dmatag, p->segs, p->nsegs, p->size, &p->addr, BUS_DMA_NOWAIT|BUS_DMA_COHERENT); if (error) { printf("%s: unable to map dma, error=%d\n", sc->sc_dev.dv_xname, error); goto free; } error = bus_dmamap_create(sc->sc_dmatag, p->size, 1, p->size, 0, BUS_DMA_NOWAIT, &p->map); if (error) { printf("%s: unable to create dma map, error=%d\n", sc->sc_dev.dv_xname, error); goto unmap; } error = bus_dmamap_load(sc->sc_dmatag, p->map, p->addr, p->size, NULL, BUS_DMA_NOWAIT); if (error) { printf("%s: unable to load dma map, error=%d\n", sc->sc_dev.dv_xname, error); goto destroy; } return (0); destroy: bus_dmamap_destroy(sc->sc_dmatag, p->map); unmap: bus_dmamem_unmap(sc->sc_dmatag, p->addr, p->size); free: bus_dmamem_free(sc->sc_dmatag, p->segs, p->nsegs); return (error); } int cs4281_src_wait(sc) struct cs4281_softc *sc; { int n; n = 0; while ((BA0READ4(sc, CS4281_ACCTL) & ACCTL_DCV)) { delay(1000); if (++n > 1000) return (-1); } return (0); }