/* $OpenBSD: idt.h,v 1.1 2005/04/19 21:30:17 miod Exp $ */ /* * Copyright (c) 2005, Miodrag Vallat * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SOLBOURNE_IDT_H_ #define _SOLBOURNE_IDT_H_ /* * Definitions for the core chips found on the IDT motherboard. * * All addresses are physical. */ /* * iGLU: GLUE Logic */ #define GLU_BASE 0x60000000 /* profiling timer (level 14) */ #define GLU_L14_DIVISOR 0x60000000 #define GLU_L14_RESOLUTION (256 / 5) /* in microseconds */ #define GLU_L14_ENABLE 0x60000008 #define GLU_L14_IACK 0x6000000c /* scheduling timer (level 10) */ #define GLU_L10_IACK 0x60000800 /* board status register */ #define GLU_BSR 0x60001800 #define GBSR_LED_MASK 0x07 #define GBSR_LED_OFF 00 #define GBSR_LED_AMBER 02 #define GBSR_LED_AMBER_BLINK 03 #define GBSR_LED_GREEN 04 #define GBSR_LED_GREEN_BLINK 05 #define GBSR_LED_BOTH_BLINK 07 #define GBSR_DIAG 0x08 #define GBSR_WARM 0x10 #define GBSR_NMI 0x20 /* board diagnostic register */ #define GLU_DIAG 0x60001808 #define GD_EXTRA_MEMORY 0x10 #define GD_36MHZ 0x20 #define GD_L2_CACHE 0x40 /* interrupt control register */ #define GLU_ICR 0x60002000 #define GICR_DISPATCH_MASK 0x0000000f /* post a software interrupt */ #define GICR_DISABLE_ALL 0x00000010 /* programmable interrupt levels for sbus and onboard audio */ #define GLU_SBUS1 0x60002008 #define GLU_SBUS2 0x60002010 #define GLU_SBUS3 0x60002018 #define GLU_SBUS4 0x60002020 #define GLU_SBUS5 0x60002028 #define GLU_SBUS6 0x60002030 #define GLU_SBUS7 0x60002038 #define GLU_AUDIO 0x60002040 /* reset register */ #define GLU_RESET 0x60002800 /* programmable base for on-board i/o devices */ #define GLU_IOBASE 0x60003800 /* * iMC: Memory Controller */ #define MC_BASE 0x70000000 #define MC0_MCR 0x70000001 #define MC1_MCR 0x71000001 /* may be missing */ #define MCR_BANK1_AVAIL 0x08 #define MCR_BANK0_AVAIL 0x04 #define MCR_BANK1_32M 0x02 #define MCR_BANK0_32M 0x01 /* * iCU: DMA and Interrupt Controller */ #define ICU_BASE 0x50000000 /* interrupt status register */ #define ICU_ISR 0x50000000 #define ISR_S0_DMA_SECC 0x00000001 #define ISR_S0_DMA_MECC 0x00000002 #define ISR_S0_DMA_SERR 0x00000004 #define ISR_S1_DMA_SECC 0x00000008 #define ISR_S1_DMA_MECC 0x00000010 #define ISR_S1_DMA_SERR 0x00000020 #define ISR_S2_DMA_SECC 0x00000040 #define ISR_S2_DMA_MECC 0x00000080 #define ISR_S2_DMA_SERR 0x00000100 #define ISR_EN_DMA_SECC 0x00000200 #define ISR_EN_DMA_MECC 0x00000400 #define ISR_EN_DMA_SERR 0x00000800 #define ISR_SCSI_DMA_SECC 0x00001000 #define ISR_SCSI_DMA_MECC 0x00002000 #define ISR_SCSI_DMA_SERR 0x00004000 #define ISR_RIO_NMI_ENABLE 0x00008000 #define ISR_DMA_NMI_ENABLE 0x00010000 #define ISR_ICU_INT_ENABLE 0x00020000 #define ISR_SECC_COUNT 0x003c0000 #define ISR_SECC_OVERFLOW 0x00400000 #define ISR_MEMDEC_MISS 0x00800000 #define ISR_XLAT_INVALID 0x01000000 #define ISR_WIN_MISS 0x02000000 #define ISR_FAULT 0x04000000 #define ISR_S0_RIO_ERR 0x08000000 #define ISR_S1_RIO_ERR 0x10000000 #define ISR_S2_RIO_ERR 0x20000000 #define ISR_EN_RIO_ERR 0x40000000 #define ISR_RIO_RETRY_TMO 0x80000000 #define ISR_BITS "\020" \ "\01S0_SECC\02S0_MECC\03S0_SERR\04S1_SECC\05S1_MECC\06S1_SERR" \ "\07S2_SECC\10S2_MECC\11S2_SERR\12EN_SECC\13EN_MECC\14EN_SERR" \ "\15SCSI_SECC\16SCSSI_MECC\17SCSI_SERR\20RIO_NMIE\21DMA_NMIE\22ICU_IE" \ "\27SECC_OVERFLOW\30MEMDEC_MISS\31XLAT_INVALID\32WIN_MISS\33FAULT" \ "\34S0_RIO\35S1_RIO\36S2_RIO\37RIO_TMO" #define ICU_TIR 0x50000008 #define ICU_TER 0x5000000c #define TER_S0 0x00000002 #define TER_S1 0x00000004 #define TER_S2 0x00000008 #define TER_ETHERNET 0x00000010 #define TER_SCSI 0x00000020 #define TER_IO_DISABLE 0x00000040 #define TER_W_COMP_DIS 0x00000080 #define ICU_TWR 0x50000010 #define ICU_TRR 0x50000014 #define ICU_CONF 0x50000018 #define CONF_ECC_ENABLE 0x00000004 #define CONF_NO_EXTRA_MEMORY 0x00000008 #define CONF_SBUS_25MHZ 0x00000020 #define CONF_SLOW_DMA_WRITE 0x00000080 #define CONF_SLOW_DMA_READ 0x00000100 #define CONF_ICACHE_DISABLE 0x00000400 /* * Onboard devices */ #define SE_BASE 0x40000000 /* scsi and ethernet */ #define NVRAM_BASE 0x80000000 #define ZS1_BASE 0x80004000 #define ZS0_BASE 0x80008000 #define FDC_BASE 0x8000c000 #define AUDIO_BASE 0x80010000 #define TODCLOCK_BASE 0x80014000 /* we map the following range 1:1 in kernel space */ #define OBIO_PA_START 0x80000000 #define OBIO_PA_END 0x80018000 #endif /* _SOLBOURNE_IDT_H_ */