[BACK]Return to ext2fs_dinode.h CVS log [TXT][DIR] Up to [local] / sys / ufs / ext2fs

Annotation of sys/ufs/ext2fs/ext2fs_dinode.h, Revision 1.1.1.1

1.1       nbrk        1: /*     $OpenBSD: ext2fs_dinode.h,v 1.10 2005/10/06 17:51:27 pedro Exp $        */
                      2: /*     $NetBSD: ext2fs_dinode.h,v 1.6 2000/01/26 16:21:33 bouyer Exp $ */
                      3:
                      4: /*
                      5:  * Copyright (c) 1997 Manuel Bouyer.
                      6:  * Copyright (c) 1982, 1989, 1993
                      7:  *     The Regents of the University of California.  All rights reserved.
                      8:  * (c) UNIX System Laboratories, Inc.
                      9:  * All or some portions of this file are derived from material licensed
                     10:  * to the University of California by American Telephone and Telegraph
                     11:  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
                     12:  * the permission of UNIX System Laboratories, Inc.
                     13:  *
                     14:  * Redistribution and use in source and binary forms, with or without
                     15:  * modification, are permitted provided that the following conditions
                     16:  * are met:
                     17:  * 1. Redistributions of source code must retain the above copyright
                     18:  *    notice, this list of conditions and the following disclaimer.
                     19:  * 2. Redistributions in binary form must reproduce the above copyright
                     20:  *    notice, this list of conditions and the following disclaimer in the
                     21:  *    documentation and/or other materials provided with the distribution.
                     22:  * 3. Neither the name of the University nor the names of its contributors
                     23:  *    may be used to endorse or promote products derived from this software
                     24:  *    without specific prior written permission.
                     25:  *
                     26:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
                     27:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     28:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     29:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
                     30:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
                     31:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
                     32:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
                     33:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
                     34:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
                     35:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
                     36:  * SUCH DAMAGE.
                     37:  *
                     38:  *     @(#)dinode.h    8.6 (Berkeley) 9/13/94
                     39:  *  Modified for ext2fs by Manuel Bouyer.
                     40:  */
                     41:
                     42: #include <sys/stat.h>
                     43:
                     44: /*
                     45:  * The root inode is the root of the file system.  Inode 0 can't be used for
                     46:  * normal purposes and bad blocks are normally linked to inode 1, thus
                     47:  * the root inode is 2.
                     48:  * Inode 3 to 10 are reserved in ext2fs.
                     49:  */
                     50: #define        EXT2_ROOTINO ((ino_t)2)
                     51: #define EXT2_FIRSTINO ((ino_t)11)
                     52:
                     53: /*
                     54:  * A dinode contains all the meta-data associated with a UFS file.
                     55:  * This structure defines the on-disk format of a dinode. Since
                     56:  * this structure describes an on-disk structure, all its fields
                     57:  * are defined by types with precise widths.
                     58:  */
                     59:
                     60: #define        NDADDR  12                      /* Direct addresses in inode. */
                     61: #define        NIADDR  3                       /* Indirect addresses in inode. */
                     62:
                     63: #define EXT2_MAXSYMLINKLEN ((NDADDR+NIADDR) * sizeof (u_int32_t))
                     64:
                     65: struct ext2fs_dinode {
                     66:        u_int16_t       e2di_mode;      /*   0: IFMT, permissions; see below. */
                     67:        u_int16_t       e2di_uid_low;   /*   2: Owner UID, lowest bits */
                     68:        u_int32_t       e2di_size;      /*       4: Size (in bytes) */
                     69:        u_int32_t       e2di_atime;     /*       8: Access time */
                     70:        u_int32_t       e2di_ctime;     /*      12: Create time */
                     71:        u_int32_t       e2di_mtime;     /*      16: Modification time */
                     72:        u_int32_t       e2di_dtime;     /*      20: Deletion time */
                     73:        u_int16_t       e2di_gid_low;   /*  24: Owner GID, lowest bits */
                     74:        u_int16_t       e2di_nlink;     /*  26: File link count */
                     75:        u_int32_t       e2di_nblock;    /*  28: Blocks count */
                     76:        u_int32_t       e2di_flags;     /*  32: Status flags (chflags) */
                     77:        u_int32_t       e2di_linux_reserved1; /* 36 */
                     78:        u_int32_t       e2di_blocks[NDADDR+NIADDR]; /* 40: disk blocks */
                     79:        u_int32_t       e2di_gen;       /* 100: generation number */
                     80:        u_int32_t       e2di_facl;      /* 104: file ACL (not implemented) */
                     81:        u_int32_t       e2di_dacl;      /* 108: dir ACL (not implemented) */
                     82:        u_int32_t       e2di_faddr;     /* 112: fragment address */
                     83:        u_int8_t        e2di_nfrag;     /* 116: fragment number */
                     84:        u_int8_t        e2di_fsize;     /* 117: fragment size */
                     85:        u_int16_t       e2di_linux_reserved2; /* 118 */
                     86:        u_int16_t       e2di_uid_high;  /* 120: 16 highest bits of uid */
                     87:        u_int16_t       e2di_gid_high;  /* 122: 16 highest bits of gid */
                     88:        u_int32_t       e2di_linux_reserved3; /* 124 */
                     89: };
                     90:
                     91: #define        E2MAXSYMLINKLEN ((NDADDR + NIADDR) * sizeof(u_int32_t))
                     92:
                     93: /* File permissions. */
                     94: #define        EXT2_IEXEC              0000100         /* Executable. */
                     95: #define        EXT2_IWRITE             0000200         /* Writeable. */
                     96: #define        EXT2_IREAD              0000400         /* Readable. */
                     97: #define        EXT2_ISVTX              0001000         /* Sticky bit. */
                     98: #define        EXT2_ISGID              0002000         /* Set-gid. */
                     99: #define        EXT2_ISUID              0004000         /* Set-uid. */
                    100:
                    101: /* File types. */
                    102: #define        EXT2_IFMT               0170000         /* Mask of file type. */
                    103: #define        EXT2_IFIFO              0010000         /* Named pipe (fifo). */
                    104: #define        EXT2_IFCHR              0020000         /* Character device. */
                    105: #define        EXT2_IFDIR              0040000         /* Directory file. */
                    106: #define        EXT2_IFBLK              0060000         /* Block device. */
                    107: #define        EXT2_IFREG              0100000         /* Regular file. */
                    108: #define        EXT2_IFLNK              0120000         /* Symbolic link. */
                    109: #define        EXT2_IFSOCK             0140000         /* UNIX domain socket. */
                    110:
                    111: /* file flags */
                    112: #define EXT2_SECRM             0x00000001      /* Secure deletion */
                    113: #define EXT2_UNRM              0x00000002      /* Undelete */
                    114: #define EXT2_COMPR             0x00000004      /* Compress file */
                    115: #define EXT2_SYNC              0x00000008      /* Synchronous updates */
                    116: #define EXT2_IMMUTABLE 0x00000010      /* Immutable file */
                    117: #define EXT2_APPEND            0x00000020      /* writes to file may only append */
                    118: #define EXT2_NODUMP            0x00000040      /* do not dump file */
                    119:
                    120: /* Size of on-disk inode. */
                    121: #define        EXT2_DINODE_SIZE        (sizeof(struct ext2fs_dinode))  /* 128 */
                    122:
                    123: /*
                    124:  * The e2di_blocks fields may be overlaid with other information for
                    125:  * file types that do not have associated disk storage. Block
                    126:  * and character devices overlay the first data block with their
                    127:  * dev_t value. Short symbolic links place their path in the
                    128:  * di_db area.
                    129:  */
                    130:
                    131: #define e2di_rdev              e2di_blocks[0]
                    132: #define e2di_shortlink e2di_blocks
                    133:
                    134: /* e2fs needs byte swapping on big-endian systems */
                    135: #if BYTE_ORDER == LITTLE_ENDIAN
                    136: #      define e2fs_iload(old, new) memcpy((new),(old),sizeof(struct ext2fs_dinode))
                    137: #      define e2fs_isave(old, new) memcpy((new),(old),sizeof(struct ext2fs_dinode))
                    138: #else
                    139: void e2fs_i_bswap(struct ext2fs_dinode *, struct ext2fs_dinode *);
                    140: #      define e2fs_iload(old, new) e2fs_i_bswap((old), (new))
                    141: #      define e2fs_isave(old, new) e2fs_i_bswap((old), (new))
                    142: #endif

CVSweb