[BACK]Return to ext2fs_dinode.h CVS log [TXT][DIR] Up to [local] / sys / ufs / ext2fs

Annotation of sys/ufs/ext2fs/ext2fs_dinode.h, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: ext2fs_dinode.h,v 1.10 2005/10/06 17:51:27 pedro Exp $        */
        !             2: /*     $NetBSD: ext2fs_dinode.h,v 1.6 2000/01/26 16:21:33 bouyer Exp $ */
        !             3:
        !             4: /*
        !             5:  * Copyright (c) 1997 Manuel Bouyer.
        !             6:  * Copyright (c) 1982, 1989, 1993
        !             7:  *     The Regents of the University of California.  All rights reserved.
        !             8:  * (c) UNIX System Laboratories, Inc.
        !             9:  * All or some portions of this file are derived from material licensed
        !            10:  * to the University of California by American Telephone and Telegraph
        !            11:  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
        !            12:  * the permission of UNIX System Laboratories, Inc.
        !            13:  *
        !            14:  * Redistribution and use in source and binary forms, with or without
        !            15:  * modification, are permitted provided that the following conditions
        !            16:  * are met:
        !            17:  * 1. Redistributions of source code must retain the above copyright
        !            18:  *    notice, this list of conditions and the following disclaimer.
        !            19:  * 2. Redistributions in binary form must reproduce the above copyright
        !            20:  *    notice, this list of conditions and the following disclaimer in the
        !            21:  *    documentation and/or other materials provided with the distribution.
        !            22:  * 3. Neither the name of the University nor the names of its contributors
        !            23:  *    may be used to endorse or promote products derived from this software
        !            24:  *    without specific prior written permission.
        !            25:  *
        !            26:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
        !            27:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
        !            28:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
        !            29:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
        !            30:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
        !            31:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
        !            32:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
        !            33:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
        !            34:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
        !            35:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
        !            36:  * SUCH DAMAGE.
        !            37:  *
        !            38:  *     @(#)dinode.h    8.6 (Berkeley) 9/13/94
        !            39:  *  Modified for ext2fs by Manuel Bouyer.
        !            40:  */
        !            41:
        !            42: #include <sys/stat.h>
        !            43:
        !            44: /*
        !            45:  * The root inode is the root of the file system.  Inode 0 can't be used for
        !            46:  * normal purposes and bad blocks are normally linked to inode 1, thus
        !            47:  * the root inode is 2.
        !            48:  * Inode 3 to 10 are reserved in ext2fs.
        !            49:  */
        !            50: #define        EXT2_ROOTINO ((ino_t)2)
        !            51: #define EXT2_FIRSTINO ((ino_t)11)
        !            52:
        !            53: /*
        !            54:  * A dinode contains all the meta-data associated with a UFS file.
        !            55:  * This structure defines the on-disk format of a dinode. Since
        !            56:  * this structure describes an on-disk structure, all its fields
        !            57:  * are defined by types with precise widths.
        !            58:  */
        !            59:
        !            60: #define        NDADDR  12                      /* Direct addresses in inode. */
        !            61: #define        NIADDR  3                       /* Indirect addresses in inode. */
        !            62:
        !            63: #define EXT2_MAXSYMLINKLEN ((NDADDR+NIADDR) * sizeof (u_int32_t))
        !            64:
        !            65: struct ext2fs_dinode {
        !            66:        u_int16_t       e2di_mode;      /*   0: IFMT, permissions; see below. */
        !            67:        u_int16_t       e2di_uid_low;   /*   2: Owner UID, lowest bits */
        !            68:        u_int32_t       e2di_size;      /*       4: Size (in bytes) */
        !            69:        u_int32_t       e2di_atime;     /*       8: Access time */
        !            70:        u_int32_t       e2di_ctime;     /*      12: Create time */
        !            71:        u_int32_t       e2di_mtime;     /*      16: Modification time */
        !            72:        u_int32_t       e2di_dtime;     /*      20: Deletion time */
        !            73:        u_int16_t       e2di_gid_low;   /*  24: Owner GID, lowest bits */
        !            74:        u_int16_t       e2di_nlink;     /*  26: File link count */
        !            75:        u_int32_t       e2di_nblock;    /*  28: Blocks count */
        !            76:        u_int32_t       e2di_flags;     /*  32: Status flags (chflags) */
        !            77:        u_int32_t       e2di_linux_reserved1; /* 36 */
        !            78:        u_int32_t       e2di_blocks[NDADDR+NIADDR]; /* 40: disk blocks */
        !            79:        u_int32_t       e2di_gen;       /* 100: generation number */
        !            80:        u_int32_t       e2di_facl;      /* 104: file ACL (not implemented) */
        !            81:        u_int32_t       e2di_dacl;      /* 108: dir ACL (not implemented) */
        !            82:        u_int32_t       e2di_faddr;     /* 112: fragment address */
        !            83:        u_int8_t        e2di_nfrag;     /* 116: fragment number */
        !            84:        u_int8_t        e2di_fsize;     /* 117: fragment size */
        !            85:        u_int16_t       e2di_linux_reserved2; /* 118 */
        !            86:        u_int16_t       e2di_uid_high;  /* 120: 16 highest bits of uid */
        !            87:        u_int16_t       e2di_gid_high;  /* 122: 16 highest bits of gid */
        !            88:        u_int32_t       e2di_linux_reserved3; /* 124 */
        !            89: };
        !            90:
        !            91: #define        E2MAXSYMLINKLEN ((NDADDR + NIADDR) * sizeof(u_int32_t))
        !            92:
        !            93: /* File permissions. */
        !            94: #define        EXT2_IEXEC              0000100         /* Executable. */
        !            95: #define        EXT2_IWRITE             0000200         /* Writeable. */
        !            96: #define        EXT2_IREAD              0000400         /* Readable. */
        !            97: #define        EXT2_ISVTX              0001000         /* Sticky bit. */
        !            98: #define        EXT2_ISGID              0002000         /* Set-gid. */
        !            99: #define        EXT2_ISUID              0004000         /* Set-uid. */
        !           100:
        !           101: /* File types. */
        !           102: #define        EXT2_IFMT               0170000         /* Mask of file type. */
        !           103: #define        EXT2_IFIFO              0010000         /* Named pipe (fifo). */
        !           104: #define        EXT2_IFCHR              0020000         /* Character device. */
        !           105: #define        EXT2_IFDIR              0040000         /* Directory file. */
        !           106: #define        EXT2_IFBLK              0060000         /* Block device. */
        !           107: #define        EXT2_IFREG              0100000         /* Regular file. */
        !           108: #define        EXT2_IFLNK              0120000         /* Symbolic link. */
        !           109: #define        EXT2_IFSOCK             0140000         /* UNIX domain socket. */
        !           110:
        !           111: /* file flags */
        !           112: #define EXT2_SECRM             0x00000001      /* Secure deletion */
        !           113: #define EXT2_UNRM              0x00000002      /* Undelete */
        !           114: #define EXT2_COMPR             0x00000004      /* Compress file */
        !           115: #define EXT2_SYNC              0x00000008      /* Synchronous updates */
        !           116: #define EXT2_IMMUTABLE 0x00000010      /* Immutable file */
        !           117: #define EXT2_APPEND            0x00000020      /* writes to file may only append */
        !           118: #define EXT2_NODUMP            0x00000040      /* do not dump file */
        !           119:
        !           120: /* Size of on-disk inode. */
        !           121: #define        EXT2_DINODE_SIZE        (sizeof(struct ext2fs_dinode))  /* 128 */
        !           122:
        !           123: /*
        !           124:  * The e2di_blocks fields may be overlaid with other information for
        !           125:  * file types that do not have associated disk storage. Block
        !           126:  * and character devices overlay the first data block with their
        !           127:  * dev_t value. Short symbolic links place their path in the
        !           128:  * di_db area.
        !           129:  */
        !           130:
        !           131: #define e2di_rdev              e2di_blocks[0]
        !           132: #define e2di_shortlink e2di_blocks
        !           133:
        !           134: /* e2fs needs byte swapping on big-endian systems */
        !           135: #if BYTE_ORDER == LITTLE_ENDIAN
        !           136: #      define e2fs_iload(old, new) memcpy((new),(old),sizeof(struct ext2fs_dinode))
        !           137: #      define e2fs_isave(old, new) memcpy((new),(old),sizeof(struct ext2fs_dinode))
        !           138: #else
        !           139: void e2fs_i_bswap(struct ext2fs_dinode *, struct ext2fs_dinode *);
        !           140: #      define e2fs_iload(old, new) e2fs_i_bswap((old), (new))
        !           141: #      define e2fs_isave(old, new) e2fs_i_bswap((old), (new))
        !           142: #endif

CVSweb