Annotation of sys/sys/scanio.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: scanio.h,v 1.7 1997/04/15 10:51:33 tholo Exp $ */
2: /* $NetBSD: scanio.h,v 1.1 1996/02/18 20:33:18 mycroft Exp $ */
3:
4: /*
5: * Copyright (c) 1995 Kenneth Stailey. All rights reserved.
6: *
7: * Redistribution and use in source and binary forms, with or without
8: * modification, are permitted provided that the following conditions
9: * are met:
10: * 1. Redistributions of source code must retain the above copyright
11: * notice, this list of conditions and the following disclaimer.
12: * 2. Redistributions in binary form must reproduce the above copyright
13: * notice, this list of conditions and the following disclaimer in the
14: * documentation and/or other materials provided with the distribution.
15: * 3. All advertising materials mentioning features or use of this software
16: * must display the following acknowledgement:
17: * This product includes software developed by Kenneth Stailey.
18: * 4. The name of the author may not be used to endorse or promote products
19: * derived from this software without specific prior written permission.
20: *
21: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24: * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25: * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26: * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30: * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31: */
32:
33: /*
34: * Definitions for PINT scanner drivers
35: */
36:
37: #ifndef _SYS_SCANIO_H
38: #define _SYS_SCANIO_H
39:
40: /*
41: * Some comments about the values in the scan_io struct:
42: *
43: * All user-changeable values have minimum and maximum values for
44: * specific scanner types and are rejected by the special drivers if
45: * they are not in range. For values in the range, the driver selects
46: * the next physically possible setting for the particular scanner.
47: * So it is good practice to issue a SCIOCGET after a SCIOCSET to see
48: * what the driver has chosen.
49: *
50: * Brightness and contrast default to 100 (%) but scanners may support
51: * higher and/or lower values, though the maximum value is 255.
52: * velocity is the scan speed and defaults to 100 (%), only slower
53: * values may be possible.
54: */
55:
56: struct scan_io {
57: u_long scan_width; /* width in 1/1200ths of an inch */
58: u_long scan_height; /* height in 1/1200ths of an inch */
59: u_short scan_x_resolution; /* horizontal resolution in dots-per-inch */
60: u_short scan_y_resolution; /* vertical resolution in dots-per-inch */
61: u_long scan_x_origin; /* horizontal coordinate of upper left corner */
62: u_long scan_y_origin; /* vertical coordinate of upper left corner */
63: u_char scan_image_mode; /* type of image data sent by scanner */
64: u_char scan_brightness; /* brightness control for those to can do it */
65: u_char scan_contrast; /* contrast control for those to can do it */
66: u_char scan_quality; /* speed of scan for instance */
67: u_long scan_window_size; /* size of window in bytes (ro) */
68: u_long scan_lines; /* number of pixels per column (ro) */
69: u_long scan_pixels_per_line; /* number of pixels per line (ro) */
70: u_short scan_bits_per_pixel; /* number of bits per pixel (ro) */
71: u_char scan_scanner_type; /* type of scanner (ro) */
72: };
73:
74: /*
75: * defines for different commands
76: */
77:
78: #define SCIOCGET _IOR('S', 1, struct scan_io) /* retrieve parameters */
79: #define SCIOCSET _IOW('S', 2, struct scan_io) /* set parameters */
80: #define SCIOCRESTART _IO('S', 3) /* restart scan */
81: #define SCIOC_USE_ADF _IO('S', 4) /* use ADF as paper source for next scan */
82: /* even after close() */
83: /*
84: * defines for scan_image_mode field
85: */
86:
87: #define SIM_BINARY_MONOCHROME 0
88: #define SIM_DITHERED_MONOCHROME 1
89: #define SIM_GRAYSCALE 2
90: #define SIM_COLOR 5
91: #define SIM_RED 103
92: #define SIM_GREEN 104
93: #define SIM_BLUE 105
94:
95: /*
96: * defines for different types of scanners & product names as comments
97: */
98:
99: #define RICOH_IS410 1 /* Ricoh IS-410 */
100: #define FUJITSU_M3096G 2 /* Fujitsu M3096G */
101: #define HP_SCANJET_IIC 3 /* HP SCL scanners (ScanJet IIc, IIcx, ...) */
102: #define RICOH_FS1 4 /* Ricoh FS1 */
103: #define SHARP_JX600 5 /* Sharp JX600 */
104: #define RICOH_IS50 6 /* Ricoh IS-50 */
105: #define IBM_2456 7 /* IBM 2456 */
106: #define UMAX_UC630 8 /* UMAX UC630 */
107: #define UMAX_UG630 9 /* UMAX UG630 */
108: #define MUSTEK_06000CX 10 /* Mustek MFS06000CX */
109: #define MUSTEK_12000CX 11 /* Mustek MFS12000CX */
110: #define EPSON_ES300C 12 /* epson es300c */
111: #define GENERIC_SCSI2 13 /* good luck 8c{)] */
112: #define ULTIMA_AC6000C 14 /* Ultima A6000C */
113: #define ULTIMA_AT3 15 /* Ultima AT3 */
114:
115: #endif /* _SYS_SCANIO_H */
CVSweb