Annotation of sys/sys/scanio.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: scanio.h,v 1.7 1997/04/15 10:51:33 tholo Exp $ */
! 2: /* $NetBSD: scanio.h,v 1.1 1996/02/18 20:33:18 mycroft Exp $ */
! 3:
! 4: /*
! 5: * Copyright (c) 1995 Kenneth Stailey. All rights reserved.
! 6: *
! 7: * Redistribution and use in source and binary forms, with or without
! 8: * modification, are permitted provided that the following conditions
! 9: * are met:
! 10: * 1. Redistributions of source code must retain the above copyright
! 11: * notice, this list of conditions and the following disclaimer.
! 12: * 2. Redistributions in binary form must reproduce the above copyright
! 13: * notice, this list of conditions and the following disclaimer in the
! 14: * documentation and/or other materials provided with the distribution.
! 15: * 3. All advertising materials mentioning features or use of this software
! 16: * must display the following acknowledgement:
! 17: * This product includes software developed by Kenneth Stailey.
! 18: * 4. The name of the author may not be used to endorse or promote products
! 19: * derived from this software without specific prior written permission.
! 20: *
! 21: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
! 22: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
! 23: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
! 24: * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
! 25: * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
! 26: * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
! 27: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
! 28: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
! 29: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
! 30: * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
! 31: */
! 32:
! 33: /*
! 34: * Definitions for PINT scanner drivers
! 35: */
! 36:
! 37: #ifndef _SYS_SCANIO_H
! 38: #define _SYS_SCANIO_H
! 39:
! 40: /*
! 41: * Some comments about the values in the scan_io struct:
! 42: *
! 43: * All user-changeable values have minimum and maximum values for
! 44: * specific scanner types and are rejected by the special drivers if
! 45: * they are not in range. For values in the range, the driver selects
! 46: * the next physically possible setting for the particular scanner.
! 47: * So it is good practice to issue a SCIOCGET after a SCIOCSET to see
! 48: * what the driver has chosen.
! 49: *
! 50: * Brightness and contrast default to 100 (%) but scanners may support
! 51: * higher and/or lower values, though the maximum value is 255.
! 52: * velocity is the scan speed and defaults to 100 (%), only slower
! 53: * values may be possible.
! 54: */
! 55:
! 56: struct scan_io {
! 57: u_long scan_width; /* width in 1/1200ths of an inch */
! 58: u_long scan_height; /* height in 1/1200ths of an inch */
! 59: u_short scan_x_resolution; /* horizontal resolution in dots-per-inch */
! 60: u_short scan_y_resolution; /* vertical resolution in dots-per-inch */
! 61: u_long scan_x_origin; /* horizontal coordinate of upper left corner */
! 62: u_long scan_y_origin; /* vertical coordinate of upper left corner */
! 63: u_char scan_image_mode; /* type of image data sent by scanner */
! 64: u_char scan_brightness; /* brightness control for those to can do it */
! 65: u_char scan_contrast; /* contrast control for those to can do it */
! 66: u_char scan_quality; /* speed of scan for instance */
! 67: u_long scan_window_size; /* size of window in bytes (ro) */
! 68: u_long scan_lines; /* number of pixels per column (ro) */
! 69: u_long scan_pixels_per_line; /* number of pixels per line (ro) */
! 70: u_short scan_bits_per_pixel; /* number of bits per pixel (ro) */
! 71: u_char scan_scanner_type; /* type of scanner (ro) */
! 72: };
! 73:
! 74: /*
! 75: * defines for different commands
! 76: */
! 77:
! 78: #define SCIOCGET _IOR('S', 1, struct scan_io) /* retrieve parameters */
! 79: #define SCIOCSET _IOW('S', 2, struct scan_io) /* set parameters */
! 80: #define SCIOCRESTART _IO('S', 3) /* restart scan */
! 81: #define SCIOC_USE_ADF _IO('S', 4) /* use ADF as paper source for next scan */
! 82: /* even after close() */
! 83: /*
! 84: * defines for scan_image_mode field
! 85: */
! 86:
! 87: #define SIM_BINARY_MONOCHROME 0
! 88: #define SIM_DITHERED_MONOCHROME 1
! 89: #define SIM_GRAYSCALE 2
! 90: #define SIM_COLOR 5
! 91: #define SIM_RED 103
! 92: #define SIM_GREEN 104
! 93: #define SIM_BLUE 105
! 94:
! 95: /*
! 96: * defines for different types of scanners & product names as comments
! 97: */
! 98:
! 99: #define RICOH_IS410 1 /* Ricoh IS-410 */
! 100: #define FUJITSU_M3096G 2 /* Fujitsu M3096G */
! 101: #define HP_SCANJET_IIC 3 /* HP SCL scanners (ScanJet IIc, IIcx, ...) */
! 102: #define RICOH_FS1 4 /* Ricoh FS1 */
! 103: #define SHARP_JX600 5 /* Sharp JX600 */
! 104: #define RICOH_IS50 6 /* Ricoh IS-50 */
! 105: #define IBM_2456 7 /* IBM 2456 */
! 106: #define UMAX_UC630 8 /* UMAX UC630 */
! 107: #define UMAX_UG630 9 /* UMAX UG630 */
! 108: #define MUSTEK_06000CX 10 /* Mustek MFS06000CX */
! 109: #define MUSTEK_12000CX 11 /* Mustek MFS12000CX */
! 110: #define EPSON_ES300C 12 /* epson es300c */
! 111: #define GENERIC_SCSI2 13 /* good luck 8c{)] */
! 112: #define ULTIMA_AC6000C 14 /* Ultima A6000C */
! 113: #define ULTIMA_AT3 15 /* Ultima AT3 */
! 114:
! 115: #endif /* _SYS_SCANIO_H */
CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to scanio.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / sys