[BACK]Return to pciio.h CVS log [TXT][DIR] Up to [local] / sys / sys

File: [local] / sys / sys / pciio.h (download)

Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:16:12 2008 UTC (16 years ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD
Changes since 1.1: +0 -0 lines

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/*	$OpenBSD: pciio.h,v 1.2 2001/06/26 20:44:14 jason Exp $	*/

/*-
 * Copyright (c) 1997, Stefan Esser <se@FreeBSD.ORG>
 * Copyright (c) 1997, 1998, 1999, Kenneth D. Merry <ken@FreeBSD.ORG>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice unmodified, this list of conditions, and the following
 *    disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *	$FreeBSD: src/sys/sys/pciio.h,v 1.5 1999/12/08 17:44:04 ken Exp $
 *
 */

#ifndef _SYS_PCIIO_H_
#define	_SYS_PCIIO_H_

#include <sys/ioccom.h>

#define PCI_MAXNAMELEN	16

typedef enum {
	PCI_GETCONF_LAST_DEVICE,
	PCI_GETCONF_LIST_CHANGED,
	PCI_GETCONF_MORE_DEVS,
	PCI_GETCONF_ERROR
} pci_getconf_status;

typedef enum {
	PCI_GETCONF_NO_MATCH		= 0x00,
	PCI_GETCONF_MATCH_BUS		= 0x01,
	PCI_GETCONF_MATCH_DEV		= 0x02,
	PCI_GETCONF_MATCH_FUNC		= 0x04,
	PCI_GETCONF_MATCH_NAME		= 0x08,
	PCI_GETCONF_MATCH_UNIT		= 0x10,
	PCI_GETCONF_MATCH_VENDOR	= 0x20,
	PCI_GETCONF_MATCH_DEVICE	= 0x40,
	PCI_GETCONF_MATCH_CLASS		= 0x80
} pci_getconf_flags;

struct pcisel {
	u_int8_t	pc_bus;		/* bus number */
	u_int8_t	pc_dev;		/* device on this bus */
	u_int8_t	pc_func;	/* function on this device */
};

struct	pci_conf {
	struct pcisel	pc_sel;		/* bus+slot+function */
	u_int8_t	pc_hdr;		/* PCI header type */
	u_int16_t	pc_subvendor;	/* card vendor ID */
	u_int16_t	pc_subdevice;	/* card device ID, assigned by 
					   card vendor */
	u_int16_t	pc_vendor;	/* chip vendor ID */
	u_int16_t	pc_device;	/* chip device ID, assigned by 
					   chip vendor */
	u_int8_t	pc_class;	/* chip PCI class */
	u_int8_t	pc_subclass;	/* chip PCI subclass */
	u_int8_t	pc_progif;	/* chip PCI programming interface */
	u_int8_t	pc_revid;	/* chip revision ID */
	char		pd_name[PCI_MAXNAMELEN + 1];  /* device name */
	u_long		pd_unit;	/* device unit number */
};

struct pci_match_conf {
	struct pcisel		pc_sel;		/* bus+slot+function */
	char			pd_name[PCI_MAXNAMELEN + 1];  /* device name */
	u_long			pd_unit;	/* Unit number */
	u_int16_t		pc_vendor;	/* PCI Vendor ID */
	u_int16_t		pc_device;	/* PCI Device ID */
	u_int8_t		pc_class;	/* PCI class */
	pci_getconf_flags	flags;		/* Matching expression */
};

struct	pci_conf_io {
	u_int32_t		pat_buf_len;	/* pattern buffer length */
	u_int32_t		num_patterns;	/* number of patterns */
	struct pci_match_conf	*patterns;	/* pattern buffer */
	u_int32_t		match_buf_len;	/* match buffer length */
	u_int32_t		num_matches;	/* number of matches returned */
	struct pci_conf		*matches;	/* match buffer */
	u_int32_t		offset;		/* offset into device list */
	u_int32_t		generation;	/* device list generation */
	pci_getconf_status	status;		/* request status */
};

struct pci_io {
	struct pcisel	pi_sel;		/* device to operate on */
	int		pi_reg;		/* configuration register to examine */
	int		pi_width;	/* width (in bytes) of read or write */
	u_int32_t	pi_data;	/* data to write or result of read */
};
	

#define	PCIOCGETCONF	_IOWR('p', 1, struct pci_conf_io)
#define	PCIOCREAD	_IOWR('p', 2, struct pci_io)
#define	PCIOCWRITE	_IOWR('p', 3, struct pci_io)
#define	PCIOCATTACHED	_IOWR('p', 4, struct pci_io)

#endif /* !_SYS_PCIIO_H_ */