Annotation of sys/sys/mtio.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: mtio.h,v 1.9 2007/06/01 18:44:48 krw Exp $ */
! 2: /* $NetBSD: mtio.h,v 1.14 1997/04/15 06:50:19 lukem Exp $ */
! 3:
! 4: /*
! 5: * Copyright (c) 1982, 1986, 1993
! 6: * The Regents of the University of California. All rights reserved.
! 7: *
! 8: * Redistribution and use in source and binary forms, with or without
! 9: * modification, are permitted provided that the following conditions
! 10: * are met:
! 11: * 1. Redistributions of source code must retain the above copyright
! 12: * notice, this list of conditions and the following disclaimer.
! 13: * 2. Redistributions in binary form must reproduce the above copyright
! 14: * notice, this list of conditions and the following disclaimer in the
! 15: * documentation and/or other materials provided with the distribution.
! 16: * 3. Neither the name of the University nor the names of its contributors
! 17: * may be used to endorse or promote products derived from this software
! 18: * without specific prior written permission.
! 19: *
! 20: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
! 21: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 22: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 23: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
! 24: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 25: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 26: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 27: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 28: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 29: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 30: * SUCH DAMAGE.
! 31: *
! 32: * @(#)mtio.h 8.1 (Berkeley) 6/2/93
! 33: */
! 34:
! 35: #ifndef _SYS_MTIO_H_
! 36: #define _SYS_MTIO_H_
! 37:
! 38: /*
! 39: * Structures and definitions for mag tape io control commands
! 40: */
! 41:
! 42: /* structure for MTIOCTOP - mag tape op command */
! 43: struct mtop {
! 44: short mt_op; /* operations defined below */
! 45: int mt_count; /* how many of them */
! 46: };
! 47:
! 48: /* operations */
! 49: #define MTWEOF 0 /* write an end-of-file record */
! 50: #define MTFSF 1 /* forward space file */
! 51: #define MTBSF 2 /* backward space file */
! 52: #define MTFSR 3 /* forward space record */
! 53: #define MTBSR 4 /* backward space record */
! 54: #define MTREW 5 /* rewind */
! 55: #define MTOFFL 6 /* rewind and put the drive offline */
! 56: #define MTNOP 7 /* no operation, sets status only */
! 57: #define MTRETEN 8 /* retension */
! 58: #define MTERASE 9 /* erase entire tape */
! 59: #define MTEOM 10 /* forward to end of media */
! 60: #define MTNBSF 11 /* backward space to beginning of file */
! 61: #define MTCACHE 12 /* enable controller cache */
! 62: #define MTNOCACHE 13 /* disable controller cache */
! 63: #define MTSETBSIZ 14 /* set block size; 0 for variable */
! 64: #define MTSETDNSTY 15 /* set density code for current mode */
! 65:
! 66: /* structure for MTIOCGET - mag tape get status command */
! 67:
! 68: struct mtget {
! 69: short mt_type; /* type of magtape device */
! 70: /* the following two registers are grossly device dependent */
! 71: short mt_dsreg; /* ``drive status'' register */
! 72: short mt_erreg; /* ``error'' register */
! 73: /* end device-dependent registers */
! 74: short mt_resid; /* residual count */
! 75: int mt_fileno; /* current file number relative to BOT. */
! 76: int mt_blkno; /* current block number relative to BOF. */
! 77: int mt_blksiz; /* current block size */
! 78: int mt_density; /* current density code */
! 79: int mt_mblksiz; /* default block size */
! 80: int mt_mdensity; /* default density code */
! 81: };
! 82:
! 83: /*
! 84: * Constants for mt_type byte. These are the same
! 85: * for controllers compatible with the types listed.
! 86: */
! 87: #define MT_ISTS 0x01 /* TS-11 */
! 88: #define MT_ISHT 0x02 /* TM03 Massbus: TE16, TU45, TU77 */
! 89: #define MT_ISTM 0x03 /* TM11/TE10 Unibus */
! 90: #define MT_ISMT 0x04 /* TM78/TU78 Massbus */
! 91: #define MT_ISUT 0x05 /* SI TU-45 emulation on Unibus */
! 92: #define MT_ISCPC 0x06 /* SUN */
! 93: #define MT_ISAR 0x07 /* SUN */
! 94: #define MT_ISTMSCP 0x08 /* DEC TMSCP protocol (TU81, TK50) */
! 95: #define MT_ISCY 0x09 /* CCI Cipher */
! 96: #define MT_ISCT 0x0a /* HP 1/4 tape */
! 97: #define MT_ISFHP 0x0b /* HP 7980 1/2 tape */
! 98: #define MT_ISEXABYTE 0x0c /* Exabyte */
! 99: #define MT_ISEXA8200 0x0c /* Exabyte EXB-8200 */
! 100: #define MT_ISEXA8500 0x0d /* Exabyte EXB-8500 */
! 101: #define MT_ISVIPER1 0x0e /* Archive Viper-150 */
! 102: #define MT_ISPYTHON 0x0f /* Archive Python (DAT) */
! 103: #define MT_ISHPDAT 0x10 /* HP 35450A DAT drive */
! 104: #define MT_ISWANGTEK 0x11 /* WANGTEK 5150ES */
! 105: #define MT_ISCALIPER 0x12 /* Caliper CP150 */
! 106: #define MT_ISWTEK5099 0x13 /* WANGTEK 5099ES */
! 107: #define MT_ISVIPER2525 0x14 /* Archive Viper 2525 */
! 108: #define MT_ISMFOUR 0x11 /* M4 Data 1/2 9track drive */
! 109: #define MT_ISTK50 0x12 /* DEC SCSI TK50 */
! 110: #define MT_ISMT02 0x13 /* Emulex MT02 SCSI tape controller */
! 111:
! 112: /* bits defined for the mt_dsreg field */
! 113: #define MT_DS_RDONLY 0x10 /* tape mounted readonly */
! 114: #define MT_DS_MOUNTED 0x03 /* tape mounted (for control opens) */
! 115:
! 116: /* mag tape io control commands */
! 117: #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
! 118: #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
! 119: #define MTIOCIEOT _IO('m', 3) /* ignore EOT error */
! 120: #define MTIOCEEOT _IO('m', 4) /* enable EOT error */
! 121:
! 122: /*
! 123: * When more SCSI-3 SSC (streaming device) devices are out there
! 124: * that support the full 32 byte type 2 structure, we'll have to
! 125: * rethink these ioctls to support all the entities they haul into
! 126: * the picture (64 bit blocks, logical file record numbers, etc..).
! 127: */
! 128: #define MTIOCRDSPOS _IOR('m', 5, u_int32_t) /* get logical blk addr */
! 129: #define MTIOCRDHPOS _IOR('m', 6, u_int32_t) /* get hardware blk addr */
! 130: #define MTIOCSLOCATE _IOW('m', 5, u_int32_t) /* seek to logical blk addr */
! 131: #define MTIOCHLOCATE _IOW('m', 6, u_int32_t) /* seek to hardware blk addr */
! 132:
! 133: #ifdef _KERNEL
! 134: /*
! 135: * minor device number
! 136: */
! 137:
! 138: #define T_UNIT 003 /* unit selection */
! 139: #define T_NOREWIND 004 /* no rewind on close */
! 140: #define T_DENSEL 030 /* density select */
! 141: #define T_800BPI 000 /* select 800 bpi */
! 142: #define T_1600BPI 010 /* select 1600 bpi */
! 143: #define T_6250BPI 020 /* select 6250 bpi */
! 144: #define T_BADBPI 030 /* undefined selection */
! 145: #endif /* _KERNEL */
! 146:
! 147: #endif /* !_SYS_MTIO_H_ */
CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to mtio.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / sys