[BACK]Return to ioccom.h CVS log [TXT][DIR] Up to [local] / sys / sys

File: [local] / sys / sys / ioccom.h (download)

Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:16:11 2008 UTC (16 years ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD
Changes since 1.1: +0 -0 lines

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/*	$OpenBSD: ioccom.h,v 1.4 2006/05/18 21:27:25 miod Exp $	*/
/*	$NetBSD: ioccom.h,v 1.4 1994/10/30 21:49:56 cgd Exp $	*/

/*-
 * Copyright (c) 1982, 1986, 1990, 1993, 1994
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)ioccom.h	8.2 (Berkeley) 3/28/94
 */

#ifndef	_SYS_IOCCOM_H_
#define	_SYS_IOCCOM_H_

/*
 * Ioctl's have the command encoded in the lower word, and the size of
 * any in or out parameters in the upper word.  The high 3 bits of the
 * upper word are used to encode the in/out status of the parameter.
 */
#define	IOCPARM_MASK	0x1fff		/* parameter length, at most 13 bits */
#define	IOCPARM_LEN(x)	(((x) >> 16) & IOCPARM_MASK)
#define	IOCBASECMD(x)	((x) & ~(IOCPARM_MASK << 16))
#define	IOCGROUP(x)	(((x) >> 8) & 0xff)

#define	IOCPARM_MAX	NBPG	/* max size of ioctl args, mult. of NBPG */
				/* no parameters */
#define	IOC_VOID	(unsigned long)0x20000000
				/* copy parameters out */
#define	IOC_OUT		(unsigned long)0x40000000
				/* copy parameters in */
#define	IOC_IN		(unsigned long)0x80000000
				/* copy parameters in and out */
#define	IOC_INOUT	(IOC_IN|IOC_OUT)
				/* mask for IN/OUT/VOID */
#define	IOC_DIRMASK	(unsigned long)0xe0000000

#define	_IOC(inout,group,num,len) \
	(inout | ((len & IOCPARM_MASK) << 16) | ((group) << 8) | (num))
#define	_IO(g,n)	_IOC(IOC_VOID,	(g), (n), 0)
#define	_IOR(g,n,t)	_IOC(IOC_OUT,	(g), (n), sizeof(t))
#define	_IOW(g,n,t)	_IOC(IOC_IN,	(g), (n), sizeof(t))
/* this should be _IORW, but stdio got there first */
#define	_IOWR(g,n,t)	_IOC(IOC_INOUT,	(g), (n), sizeof(t))

#endif /* !_SYS_IOCCOM_H_ */