Annotation of sys/scsi/ss_mustek.c, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: ss_mustek.c,v 1.14 2006/11/28 16:56:50 dlg Exp $ */
! 2: /* $NetBSD: ss_mustek.c,v 1.4 1996/05/05 19:52:57 christos Exp $ */
! 3:
! 4: /*
! 5: * Copyright (c) 1995 Joachim Koenig-Baltes. All rights reserved.
! 6: *
! 7: * Redistribution and use in source and binary forms, with or without
! 8: * modification, are permitted provided that the following conditions
! 9: * are met:
! 10: * 1. Redistributions of source code must retain the above copyright
! 11: * notice, this list of conditions and the following disclaimer.
! 12: * 2. Redistributions in binary form must reproduce the above copyright
! 13: * notice, this list of conditions and the following disclaimer in the
! 14: * documentation and/or other materials provided with the distribution.
! 15: * 3. All advertising materials mentioning features or use of this software
! 16: * must display the following acknowledgement:
! 17: * This product includes software developed by Joachim Koenig-Baltes.
! 18: * 4. The name of the author may not be used to endorse or promote products
! 19: * derived from this software without specific prior written permission.
! 20: *
! 21: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
! 22: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
! 23: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
! 24: * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
! 25: * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
! 26: * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
! 27: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
! 28: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
! 29: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
! 30: * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
! 31: */
! 32:
! 33: /*
! 34: * special driver for MUSTEK flatbed scanners MFS 06000CX and MFS 12000CX
! 35: * these scanners come with their own scsi card, containing an NCR53C400
! 36: * SCSI controller chip. I'm in the progress of writing a driver for this
! 37: * card to work under NetBSD-current. I've hooked it up to a Seagate ST01
! 38: * hostadapter in the meantime, giving 350KB/sec for higher resolutions!
! 39: *
! 40: * I tried to connect it to my Adaptec 1542B, but with no success. It seems,
! 41: * it does not like synchronous negotiation between Hostadapter and other
! 42: * targets, but I could not turn this off for the 1542B.
! 43: *
! 44: * There is also an other reason why you would not like to connect it to your
! 45: * favourite SCSI host adapter: The Mustek DOES NOT DISCONNECT. It will block
! 46: * other traffic from the bus while a transfer is active.
! 47: */
! 48:
! 49: #include <sys/types.h>
! 50: #include <sys/param.h>
! 51: #include <sys/kernel.h>
! 52: #include <sys/systm.h>
! 53: #include <sys/fcntl.h>
! 54: #include <sys/errno.h>
! 55: #include <sys/ioctl.h>
! 56: #include <sys/malloc.h>
! 57: #include <sys/buf.h>
! 58: #include <sys/proc.h>
! 59: #include <sys/user.h>
! 60: #include <sys/device.h>
! 61: #include <sys/conf.h> /* for cdevsw */
! 62: #include <sys/scanio.h>
! 63:
! 64: #include <scsi/scsi_all.h>
! 65: #include <scsi/scsi_scanner.h>
! 66: #include <scsi/scsiconf.h>
! 67: #include <scsi/ssvar.h>
! 68: #include <scsi/ss_mustek.h>
! 69:
! 70: #define MUSTEK_RETRIES 4
! 71:
! 72: int mustek_set_params(struct ss_softc *, struct scan_io *);
! 73: int mustek_trigger_scanner(struct ss_softc *);
! 74: void mustek_minphys(struct ss_softc *, struct buf *);
! 75: int mustek_read(struct ss_softc *, struct buf *);
! 76: int mustek_rewind_scanner(struct ss_softc *);
! 77:
! 78: /* only used internally */
! 79: int mustek_get_status(struct ss_softc *, int, int);
! 80: void mustek_compute_sizes(struct ss_softc *);
! 81:
! 82: /*
! 83: * structure for the special handlers
! 84: */
! 85: struct ss_special mustek_special = {
! 86: mustek_set_params,
! 87: mustek_trigger_scanner,
! 88: NULL,
! 89: mustek_minphys,
! 90: mustek_read,
! 91: mustek_rewind_scanner,
! 92: NULL, /* no adf support right now */
! 93: NULL /* no adf support right now */
! 94: };
! 95:
! 96: /*
! 97: * mustek_attach: attach special functions to ss
! 98: */
! 99: void
! 100: mustek_attach(ss, sa)
! 101: struct ss_softc *ss;
! 102: struct scsi_attach_args *sa;
! 103: {
! 104: #ifdef SCSIDEBUG
! 105: struct scsi_link *sc_link = sa->sa_sc_link;
! 106: #endif
! 107:
! 108: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_attach: start\n"));
! 109: ss->sio.scan_scanner_type = 0;
! 110:
! 111: printf("\n%s: ", ss->sc_dev.dv_xname);
! 112:
! 113: /* first, check the model which determines resolutions */
! 114: if (!bcmp(sa->sa_inqbuf->product, "MFS-06000CX", 11)) {
! 115: ss->sio.scan_scanner_type = MUSTEK_06000CX;
! 116: printf("Mustek 6000CX Flatbed 3-pass color scanner, 3 - 600 dpi\n");
! 117: }
! 118: if (!bcmp(sa->sa_inqbuf->product, "MFS-12000CX", 11)) {
! 119: ss->sio.scan_scanner_type = MUSTEK_12000CX;
! 120: printf("Mustek 12000CX Flatbed 3-pass color scanner, 6 - 1200 dpi\n");
! 121: }
! 122:
! 123: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_attach: scanner_type = %d\n",
! 124: ss->sio.scan_scanner_type));
! 125:
! 126: /* install special handlers */
! 127: ss->special = mustek_special;
! 128:
! 129: mustek_compute_sizes(ss);
! 130: }
! 131:
! 132: /*
! 133: * check the parameters if the mustek is capable of fulfilling it
! 134: * but don't send the command to the scanner in case the user wants
! 135: * to change parameters by more than one call
! 136: */
! 137: int
! 138: mustek_set_params(ss, sio)
! 139: struct ss_softc *ss;
! 140: struct scan_io *sio;
! 141: {
! 142: int error;
! 143:
! 144: /*
! 145: * if the scanner is triggered, then rewind it
! 146: */
! 147: if (ss->flags & SSF_TRIGGERED) {
! 148: error = mustek_rewind_scanner(ss);
! 149: if (error)
! 150: return (error);
! 151: }
! 152:
! 153: /* size constraints: 8.5" horizontally and 14" vertically */
! 154: #ifdef MUSTEK_INCH_SPEC
! 155: /* sizes must be a multiple of 1/8" */
! 156: sio->scan_x_origin -= sio->scan_x_origin % 150;
! 157: sio->scan_y_origin -= sio->scan_y_origin % 150;
! 158: sio->scan_width -= sio->scan_width % 150;
! 159: sio->scan_height -= sio->scan_height % 150;
! 160: #endif
! 161: if (sio->scan_width == 0 ||
! 162: sio->scan_x_origin + sio->scan_width > 10200 ||
! 163: sio->scan_height == 0 ||
! 164: sio->scan_y_origin + sio->scan_height > 16800)
! 165: return (EINVAL);
! 166:
! 167: /*
! 168: * for now, only realize the values for the MUSTEK_06000CX
! 169: * in the future, values for the MUSTEK_12000CX will be implemented
! 170: */
! 171:
! 172: /*
! 173: * resolution (dpi) must be <= 300 and a multiple of 3 or
! 174: * between 300 and 600 and a multiple of 30
! 175: */
! 176: sio->scan_x_resolution -= sio->scan_x_resolution <= 300 ?
! 177: sio->scan_x_resolution % 3 : sio->scan_x_resolution % 30;
! 178: sio->scan_y_resolution -= sio->scan_y_resolution <= 300 ?
! 179: sio->scan_y_resolution % 3 : sio->scan_y_resolution % 30;
! 180: if (sio->scan_x_resolution < 3 || sio->scan_x_resolution > 600 ||
! 181: sio->scan_x_resolution != sio->scan_y_resolution)
! 182: return (EINVAL);
! 183:
! 184: /* assume brightness values are between 64 and 136 in steps of 3 */
! 185: sio->scan_brightness -= (sio->scan_brightness - 64) % 3;
! 186: if (sio->scan_brightness < 64 || sio->scan_brightness > 136)
! 187: return (EINVAL);
! 188:
! 189: /* contrast values must be between 16 and 184 in steps of 7 */
! 190: sio->scan_contrast -= (sio->scan_contrast - 16) % 7;
! 191: if (sio->scan_contrast < 16 || sio->scan_contrast > 184)
! 192: return (EINVAL);
! 193:
! 194: /*
! 195: * velocity: between 0 (fast) and 4 (slow) which will be mapped
! 196: * to 100% = 4, 80% = 3, 60% = 2, 40% = 1, 20% = 0
! 197: * must be a multiple of 20
! 198: */
! 199: sio->scan_quality -= sio->scan_quality % 20;
! 200: if (sio->scan_quality < 20 || sio->scan_quality > 100)
! 201: return (EINVAL);
! 202:
! 203: switch (sio->scan_image_mode) {
! 204: case SIM_BINARY_MONOCHROME:
! 205: case SIM_DITHERED_MONOCHROME:
! 206: case SIM_GRAYSCALE:
! 207: case SIM_RED:
! 208: case SIM_GREEN:
! 209: case SIM_BLUE:
! 210: break;
! 211: default:
! 212: return (EINVAL);
! 213: }
! 214:
! 215: /* change ss_softc to the new values, but save ro-variables */
! 216: sio->scan_scanner_type = ss->sio.scan_scanner_type;
! 217: bcopy(sio, &ss->sio, sizeof(struct scan_io));
! 218:
! 219: mustek_compute_sizes(ss);
! 220:
! 221: return (0);
! 222: }
! 223:
! 224: /*
! 225: * trim the requested transfer to a multiple of the line size
! 226: * this is called only from ssread() which guarantees, scanner is triggered
! 227: * In the future, it will trim the transfer to not read to much at a time
! 228: * because the mustek cannot disconnect. It will be calculated by the
! 229: * resolution, the velocity and the number of bytes per line.
! 230: */
! 231: void
! 232: mustek_minphys(ss, bp)
! 233: struct ss_softc *ss;
! 234: struct buf *bp;
! 235: {
! 236: #ifdef SCSIDEBUG
! 237: struct scsi_link *sc_link = ss->sc_link;
! 238: #endif
! 239:
! 240: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_minphys: before: %ld\n",
! 241: bp->b_bcount));
! 242: bp->b_bcount -= bp->b_bcount %
! 243: ((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8);
! 244: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_minphys: after: %ld\n",
! 245: bp->b_bcount));
! 246: }
! 247:
! 248: /*
! 249: * trigger the scanner to start a scan operation
! 250: * this includes sending the mode- and window-data, starting the scanner
! 251: * and getting the image size info
! 252: */
! 253: int
! 254: mustek_trigger_scanner(ss)
! 255: struct ss_softc *ss;
! 256: {
! 257: struct mustek_mode_select_cmd mode_cmd;
! 258: struct mustek_mode_select_data mode_data;
! 259: struct mustek_set_window_cmd window_cmd;
! 260: struct mustek_set_window_data window_data;
! 261: struct mustek_start_scan_cmd start_scan_cmd;
! 262: struct scsi_link *sc_link = ss->sc_link;
! 263: int pixel_tlx, pixel_tly, pixel_brx, pixel_bry, paperlength;
! 264: int error;
! 265:
! 266: mustek_compute_sizes(ss);
! 267:
! 268: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner\n"));
! 269:
! 270: /*
! 271: * set the window params and send the scsi command
! 272: */
! 273: bzero(&window_cmd, sizeof(window_cmd));
! 274: window_cmd.opcode = MUSTEK_SET_WINDOW;
! 275: window_cmd.length = sizeof(window_data);
! 276:
! 277: bzero(&window_data, sizeof(window_data));
! 278: window_data.frame.header = MUSTEK_LINEART_BACKGROUND | MUSTEK_UNIT_SPEC;
! 279: #ifdef MUSTEK_INCH_SPEC
! 280: /* the positional values are all 1 byte because 256 / 8 = 32" */
! 281: pixel_tlx = ss->sio.scan_x_origin / 150;
! 282: pixel_tly = ss->sio.scan_y_origin / 150;
! 283: pixel_brx = pixel_tlx + ss->sio.scan_width / 150;
! 284: pixel_bry = pixel_tly + ss->sio.scan_height / 150;
! 285: #else
! 286: pixel_tlx = (ss->sio.scan_x_origin * ss->sio.scan_x_resolution) / 1200;
! 287: pixel_tly = (ss->sio.scan_y_origin * ss->sio.scan_y_resolution) / 1200;
! 288: pixel_brx = pixel_tlx +
! 289: (ss->sio.scan_width * ss->sio.scan_x_resolution) / 1200;
! 290: pixel_bry = pixel_tly +
! 291: (ss->sio.scan_height * ss->sio.scan_y_resolution) / 1200;
! 292: #endif
! 293: _lto2l(pixel_tlx, window_data.frame.tl_x);
! 294: _lto2l(pixel_tly, window_data.frame.tl_y);
! 295: _lto2l(pixel_brx, window_data.frame.br_x);
! 296: _lto2l(pixel_bry, window_data.frame.br_y);
! 297:
! 298: #if MUSTEK_WINDOWS >= 1
! 299: window_data.window1 = window_data.frame;
! 300: window_data.window1.header = MUSTEK_WINDOW_MASK | MUSTEK_UNIT_SPEC;
! 301: #endif
! 302:
! 303: /* send the set window command to the scanner */
! 304: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_set_parms: set_window\n"));
! 305: error = scsi_scsi_cmd(sc_link, (struct scsi_generic *) &window_cmd,
! 306: sizeof(window_cmd), (u_char *) &window_data, sizeof(window_data),
! 307: MUSTEK_RETRIES, 5000, NULL, SCSI_DATA_OUT);
! 308: if (error)
! 309: return (error);
! 310:
! 311: /*
! 312: * do what it takes to actualize the mode
! 313: */
! 314: bzero(&mode_cmd, sizeof(mode_cmd));
! 315: mode_cmd.opcode = MUSTEK_MODE_SELECT;
! 316: _lto2b(sizeof(mode_data), mode_cmd.length);
! 317:
! 318: bzero(&mode_data, sizeof(mode_data));
! 319: mode_data.mode =
! 320: MUSTEK_MODE_MASK | MUSTEK_HT_PATTERN_BUILTIN | MUSTEK_UNIT_SPEC;
! 321: if (ss->sio.scan_x_resolution <= 300) {
! 322: mode_data.resolution = ss->sio.scan_x_resolution / 3;
! 323: } else {
! 324: /*
! 325: * the resolution values is computed by modulo 100, but not
! 326: * for 600dpi, where the value is 100 (a bit tricky, but ...)
! 327: */
! 328: mode_data.resolution =
! 329: ((ss->sio.scan_x_resolution - 1) % 100) + 1;
! 330: }
! 331: mode_data.brightness = (ss->sio.scan_brightness - 64) / 3;
! 332: mode_data.contrast = (ss->sio.scan_contrast - 16) / 7;
! 333: mode_data.grain = 0;
! 334: mode_data.velocity = ss->sio.scan_quality / 20 - 1;
! 335: #ifdef MUSTEK_INCH_SPEC
! 336: paperlength = 14 * 8; /* 14" */
! 337: #else
! 338: paperlength = 14 * ss->sio.scan_y_resolution; /* 14" */
! 339: #endif
! 340: _lto2l(paperlength, mode_data.paperlength);
! 341:
! 342: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner: mode_select\n"));
! 343: /* send the command to the scanner */
! 344: error = scsi_scsi_cmd(sc_link, (struct scsi_generic *) &mode_cmd,
! 345: sizeof(mode_cmd), (u_char *) &mode_data, sizeof(mode_data),
! 346: MUSTEK_RETRIES, 5000, NULL, SCSI_DATA_OUT);
! 347: if (error)
! 348: return (error);
! 349:
! 350: /*
! 351: * now construct and send the start command
! 352: */
! 353: bzero(&start_scan_cmd,sizeof(start_scan_cmd));
! 354: start_scan_cmd.opcode = MUSTEK_START_STOP;
! 355: start_scan_cmd.mode = MUSTEK_SCAN_START;
! 356: if (ss->sio.scan_x_resolution <= 300)
! 357: start_scan_cmd.mode |= MUSTEK_RES_STEP_1;
! 358: else
! 359: start_scan_cmd.mode |= MUSTEK_RES_STEP_10;
! 360: switch (ss->sio.scan_image_mode) {
! 361: case SIM_BINARY_MONOCHROME:
! 362: case SIM_DITHERED_MONOCHROME:
! 363: start_scan_cmd.mode |= MUSTEK_BIT_MODE | MUSTEK_GRAY_FILTER;
! 364: break;
! 365: case SIM_GRAYSCALE:
! 366: start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_GRAY_FILTER;
! 367: break;
! 368: case SIM_RED:
! 369: start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_RED_FILTER;
! 370: break;
! 371: case SIM_GREEN:
! 372: start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_GREEN_FILTER;
! 373: break;
! 374: case SIM_BLUE:
! 375: start_scan_cmd.mode |= MUSTEK_GRAY_MODE | MUSTEK_BLUE_FILTER;
! 376: break;
! 377: }
! 378:
! 379: /* send the command to the scanner */
! 380: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner: start_scan\n"));
! 381: error = scsi_scsi_cmd(sc_link, (struct scsi_generic *) &start_scan_cmd,
! 382: sizeof(start_scan_cmd), NULL, 0,
! 383: MUSTEK_RETRIES, 5000, NULL, 0);
! 384: if (error)
! 385: return (error);
! 386:
! 387: /*
! 388: * now check if scanner ready this time with update of size info
! 389: * we wait here so that if the user issues a read directly afterwards,
! 390: * the scanner will respond directly (otherwise we had to sleep with
! 391: * a buffer locked in memory)
! 392: */
! 393: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_trigger_scanner: get_status\n"));
! 394: error = mustek_get_status(ss, 60, 1);
! 395: if (error)
! 396: return (error);
! 397:
! 398: return (0);
! 399: }
! 400:
! 401: /*
! 402: * stop a scan operation in progress
! 403: */
! 404: int
! 405: mustek_rewind_scanner(ss)
! 406: struct ss_softc *ss;
! 407: {
! 408: struct mustek_start_scan_cmd cmd;
! 409: struct scsi_link *sc_link = ss->sc_link;
! 410: int error;
! 411:
! 412: if (ss->sio.scan_window_size != 0) {
! 413: /*
! 414: * only if not all data has been read, the scanner has to be
! 415: * stopped
! 416: */
! 417: bzero(&cmd, sizeof(cmd));
! 418: cmd.opcode = MUSTEK_START_STOP;
! 419: cmd.mode = MUSTEK_SCAN_STOP;
! 420:
! 421: /* send the command to the scanner */
! 422: SC_DEBUG(sc_link, SDEV_DB1,
! 423: ("mustek_rewind_scanner: stop_scan\n"));
! 424: error = scsi_scsi_cmd(sc_link, (struct scsi_generic *) &cmd,
! 425: sizeof(cmd), NULL, 0, MUSTEK_RETRIES, 5000, NULL, 0);
! 426: if (error)
! 427: return (error);
! 428: }
! 429:
! 430: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_rewind_scanner: end\n"));
! 431:
! 432: return (0);
! 433: }
! 434:
! 435: /*
! 436: * read the requested number of bytes/lines from the scanner
! 437: */
! 438: int
! 439: mustek_read(ss, bp)
! 440: struct ss_softc *ss;
! 441: struct buf *bp;
! 442: {
! 443: struct mustek_read_cmd cmd;
! 444: struct scsi_link *sc_link = ss->sc_link;
! 445: u_long lines_to_read;
! 446:
! 447: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_read: start\n"));
! 448:
! 449: bzero(&cmd, sizeof(cmd));
! 450: cmd.opcode = MUSTEK_READ;
! 451:
! 452: /* instead of the bytes, the mustek wants the number of lines */
! 453: lines_to_read = bp->b_bcount /
! 454: ((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8);
! 455: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_read: read %ld lines\n",
! 456: lines_to_read));
! 457: _lto3b(lines_to_read, cmd.length);
! 458:
! 459: /*
! 460: * go ask the adapter to do all this for us
! 461: */
! 462: if (scsi_scsi_cmd(sc_link, (struct scsi_generic *) &cmd, sizeof(cmd),
! 463: (u_char *) bp->b_data, bp->b_bcount, MUSTEK_RETRIES, 10000, bp,
! 464: SCSI_NOSLEEP | SCSI_DATA_IN) != SUCCESSFULLY_QUEUED)
! 465: printf("%s: not queued\n", ss->sc_dev.dv_xname);
! 466: else {
! 467: ss->sio.scan_lines -= lines_to_read;
! 468: ss->sio.scan_window_size -= bp->b_bcount;
! 469: }
! 470:
! 471: return (0);
! 472: }
! 473:
! 474: /*
! 475: * check if the scanner is ready to take commands
! 476: * wait timeout seconds and try only every second
! 477: * if update, then update picture size info
! 478: *
! 479: * returns EBUSY if scanner not ready
! 480: */
! 481: int
! 482: mustek_get_status(ss, timeout, update)
! 483: struct ss_softc *ss;
! 484: int timeout, update;
! 485: {
! 486: struct mustek_get_status_cmd cmd;
! 487: struct mustek_get_status_data data;
! 488: struct scsi_link *sc_link = ss->sc_link;
! 489: int error, lines, bytes_per_line;
! 490:
! 491: bzero(&cmd, sizeof(cmd));
! 492: cmd.opcode = MUSTEK_GET_STATUS;
! 493: cmd.length = sizeof(data);
! 494:
! 495: while (1) {
! 496: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_get_status: stat_cmd\n"));
! 497: error = scsi_scsi_cmd(sc_link, (struct scsi_generic *) &cmd,
! 498: sizeof(cmd), (u_char *) &data, sizeof(data), MUSTEK_RETRIES,
! 499: 5000, NULL, SCSI_DATA_IN);
! 500: if (error)
! 501: return (error);
! 502: if ((data.ready_busy == MUSTEK_READY) ||
! 503: (timeout-- <= 0))
! 504: break;
! 505: /* please wait a second */
! 506: tsleep((caddr_t)mustek_get_status, PRIBIO + 1, "mtkrdy", hz);
! 507: }
! 508:
! 509: if (update) {
! 510: bytes_per_line = _2ltol(data.bytes_per_line);
! 511: lines = _3ltol(data.lines);
! 512: if (lines != ss->sio.scan_lines) {
! 513: printf("mustek: lines actual(%d) != computed(%ld)\n",
! 514: lines, ss->sio.scan_lines);
! 515: return (EIO);
! 516: }
! 517: if (bytes_per_line * lines != ss->sio.scan_window_size) {
! 518: printf("mustek: win-size actual(%d) != computed(%ld)\n",
! 519: bytes_per_line * lines, ss->sio.scan_window_size);
! 520: return (EIO);
! 521: }
! 522:
! 523: SC_DEBUG(sc_link, SDEV_DB1,
! 524: ("mustek_get_size: bpl=%ld, lines=%ld\n",
! 525: (ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8,
! 526: ss->sio.scan_lines));
! 527: SC_DEBUG(sc_link, SDEV_DB1, ("window size = %ld\n",
! 528: ss->sio.scan_window_size));
! 529: }
! 530:
! 531: SC_DEBUG(sc_link, SDEV_DB1, ("mustek_get_status: end\n"));
! 532: if (data.ready_busy == MUSTEK_READY)
! 533: return (0);
! 534: else
! 535: return (EBUSY);
! 536: }
! 537:
! 538: /*
! 539: * mustek_compute_sizes: compute window_size and lines for the picture
! 540: * this function is called from different places in the code
! 541: */
! 542: void
! 543: mustek_compute_sizes(ss)
! 544: struct ss_softc *ss;
! 545: {
! 546:
! 547: switch (ss->sio.scan_image_mode) {
! 548: case SIM_BINARY_MONOCHROME:
! 549: case SIM_DITHERED_MONOCHROME:
! 550: ss->sio.scan_bits_per_pixel = 1;
! 551: break;
! 552: case SIM_GRAYSCALE:
! 553: case SIM_RED:
! 554: case SIM_GREEN:
! 555: case SIM_BLUE:
! 556: ss->sio.scan_bits_per_pixel = 8;
! 557: break;
! 558: }
! 559:
! 560: /*
! 561: * horizontal number of bytes is always a multiple of 2,
! 562: * in 8-bit mode at least
! 563: */
! 564: ss->sio.scan_pixels_per_line =
! 565: (ss->sio.scan_width * ss->sio.scan_x_resolution) / 1200;
! 566: if (ss->sio.scan_bits_per_pixel == 1)
! 567: /* make it a multiple of 16, and thus of 2 bytes */
! 568: ss->sio.scan_pixels_per_line =
! 569: (ss->sio.scan_pixels_per_line + 15) & 0xfffffff0;
! 570: else
! 571: ss->sio.scan_pixels_per_line =
! 572: (ss->sio.scan_pixels_per_line + 1) & 0xfffffffe;
! 573:
! 574: ss->sio.scan_lines =
! 575: (ss->sio.scan_height * ss->sio.scan_y_resolution) / 1200;
! 576: ss->sio.scan_window_size = ss->sio.scan_lines *
! 577: ((ss->sio.scan_pixels_per_line * ss->sio.scan_bits_per_pixel) / 8);
! 578: }
CVSweb