[BACK]Return to if_sppp.h CVS log [TXT][DIR] Up to [local] / sys / net

Annotation of sys/net/if_sppp.h, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: if_sppp.h,v 1.11 2007/04/17 21:36:58 mpf Exp $        */
        !             2: /*     $NetBSD: if_sppp.h,v 1.2.2.1 1999/04/04 06:57:39 explorer Exp $ */
        !             3:
        !             4: /*
        !             5:  * Defines for synchronous PPP/Cisco link level subroutines.
        !             6:  *
        !             7:  * Copyright (C) 1994 Cronyx Ltd.
        !             8:  * Author: Serge Vakulenko, <vak@cronyx.ru>
        !             9:  *
        !            10:  * Heavily revamped to conform to RFC 1661.
        !            11:  * Copyright (C) 1997, Joerg Wunsch.
        !            12:  *
        !            13:  * Redistribution and use in source and binary forms, with or without
        !            14:  * modification, are permitted provided that the following conditions are met:
        !            15:  * 1. Redistributions of source code must retain the above copyright notice,
        !            16:  *    this list of conditions and the following disclaimer.
        !            17:  * 2. Redistributions in binary form must reproduce the above copyright notice,
        !            18:  *    this list of conditions and the following disclaimer in the documentation
        !            19:  *    and/or other materials provided with the distribution.
        !            20:  *
        !            21:  * THIS SOFTWARE IS PROVIDED BY THE FREEBSD PROJECT ``AS IS'' AND ANY
        !            22:  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
        !            23:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
        !            24:  * ARE DISCLAIMED. IN NO EVENT SHALL THE FREEBSD PROJECT OR CONTRIBUTORS BE
        !            25:  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
        !            26:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
        !            27:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
        !            28:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
        !            29:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
        !            30:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
        !            31:  * POSSIBILITY OF SUCH DAMAGE.
        !            32:  *
        !            33:  * From: Version 2.0, Fri Oct  6 20:39:21 MSK 1995
        !            34:  *
        !            35:  * From: if_sppp.h,v 1.8 1997/10/11 11:25:20 joerg Exp
        !            36:  *
        !            37:  * From: Id: if_sppp.h,v 1.7 1998/12/01 20:20:19 hm Exp
        !            38:  */
        !            39:
        !            40: #ifndef _NET_IF_SPPP_H_
        !            41: #define _NET_IF_SPPP_H_
        !            42:
        !            43: #include <sys/timeout.h>
        !            44:
        !            45: #define IDX_LCP 0              /* idx into state table */
        !            46:
        !            47: struct slcp {
        !            48:        u_long  opts;           /* LCP options to send (bitfield) */
        !            49:        u_long  magic;          /* local magic number */
        !            50:        u_long  mru;            /* our max receive unit */
        !            51:        u_long  their_mru;      /* their max receive unit */
        !            52:        u_long  protos;         /* bitmask of protos that are started */
        !            53:        u_char  echoid;         /* id of last keepalive echo request */
        !            54:        /* restart max values, see RFC 1661 */
        !            55:        int     timeout;
        !            56:        int     max_terminate;
        !            57:        int     max_configure;
        !            58:        int     max_failure;
        !            59: };
        !            60:
        !            61: #define IDX_IPCP 1             /* idx into state table */
        !            62:
        !            63: struct sipcp {
        !            64:        u_long  opts;           /* IPCP options to send (bitfield) */
        !            65:        u_int   flags;
        !            66: #define IPCP_HISADDR_SEEN 1    /* have seen his address already */
        !            67: #define IPCP_MYADDR_DYN   2    /* my address is dynamically assigned */
        !            68: #define IPCP_MYADDR_SEEN  4    /* have seen his address already */
        !            69: #define IPCP_HISADDR_DYN  8    /* his address is dynamically assigned */
        !            70:        u_int32_t saved_hisaddr; /* if hisaddr (IPv4) is dynamic, save
        !            71:                                  * original one here, in network byte order */
        !            72:        u_int32_t req_hisaddr;  /* remote address requested */
        !            73:        u_int32_t req_myaddr;   /* local address requested */
        !            74: };
        !            75:
        !            76: #define AUTHNAMELEN    64
        !            77: #define AUTHKEYLEN     16
        !            78:
        !            79: struct sauth {
        !            80:        u_short proto;                  /* authentication protocol to use */
        !            81:        u_short flags;
        !            82: #define AUTHFLAG_NOCALLOUT     1       /* do not require authentication on */
        !            83:                                        /* callouts */
        !            84: #define AUTHFLAG_NORECHALLENGE 2       /* do not re-challenge CHAP */
        !            85:        u_char  name[AUTHNAMELEN];      /* system identification name */
        !            86:        u_char  secret[AUTHKEYLEN];     /* secret password */
        !            87:        u_char  challenge[AUTHKEYLEN];  /* random challenge */
        !            88: };
        !            89:
        !            90: #define IDX_PAP                2
        !            91: #define IDX_CHAP       3
        !            92:
        !            93: #define IDX_COUNT (IDX_CHAP + 1) /* bump this when adding cp's! */
        !            94:
        !            95: /*
        !            96:  * Don't change the order of this.  Ordering the phases this way allows
        !            97:  * for a comparision of ``pp_phase >= PHASE_AUTHENTICATE'' in order to
        !            98:  * know whether LCP is up.
        !            99:  */
        !           100: enum ppp_phase {
        !           101:        PHASE_DEAD, PHASE_ESTABLISH, PHASE_TERMINATE,
        !           102:        PHASE_AUTHENTICATE, PHASE_NETWORK
        !           103: };
        !           104:
        !           105: struct sppp {
        !           106:        /* NB: pp_if _must_ be first */
        !           107:        struct  ifnet pp_if;    /* network interface data */
        !           108:        struct  ifqueue pp_fastq; /* fast output queue */
        !           109:        struct  ifqueue pp_cpq; /* PPP control protocol queue */
        !           110:        struct  sppp *pp_next;  /* next interface in keepalive list */
        !           111:        u_int   pp_flags;       /* use Cisco protocol instead of PPP */
        !           112:        u_int   pp_framebytes;  /* number of bytes added by hardware framing */
        !           113:        u_short pp_alivecnt;    /* keepalive packets counter */
        !           114:        u_short pp_loopcnt;     /* loopback detection counter */
        !           115:        u_int32_t  pp_seq;      /* local sequence number */
        !           116:        u_int32_t  pp_rseq;     /* remote sequence number */
        !           117:        time_t  pp_last_receive;        /* peer's last "sign of life" */
        !           118:        time_t  pp_last_activity;       /* second of last payload data s/r */
        !           119:        enum ppp_phase pp_phase;        /* phase we're currently in */
        !           120:        int     state[IDX_COUNT];       /* state machine */
        !           121:        u_char  confid[IDX_COUNT];      /* id of last configuration request */
        !           122:        int     rst_counter[IDX_COUNT]; /* restart counter */
        !           123:        int     fail_counter[IDX_COUNT]; /* negotiation failure counter */
        !           124:        struct timeout ch[IDX_COUNT];
        !           125:        struct timeout pap_my_to_ch;
        !           126:        struct slcp lcp;                /* LCP params */
        !           127:        struct sipcp ipcp;              /* IPCP params */
        !           128:        struct sauth myauth;            /* auth params, i'm peer */
        !           129:        struct sauth hisauth;           /* auth params, i'm authenticator */
        !           130:        /*
        !           131:         * These functions are filled in by sppp_attach(), and are
        !           132:         * expected to be used by the lower layer (hardware) drivers
        !           133:         * in order to communicate the (un)availability of the
        !           134:         * communication link.  Lower layer drivers that are always
        !           135:         * ready to communicate (like hardware HDLC) can shortcut
        !           136:         * pp_up from pp_tls, and pp_down from pp_tlf.
        !           137:         */
        !           138:        void    (*pp_up)(struct sppp *sp);
        !           139:        void    (*pp_down)(struct sppp *sp);
        !           140:        /*
        !           141:         * These functions need to be filled in by the lower layer
        !           142:         * (hardware) drivers if they request notification from the
        !           143:         * PPP layer whether the link is actually required.  They
        !           144:         * correspond to the tls and tlf actions.
        !           145:         */
        !           146:        void    (*pp_tls)(struct sppp *sp);
        !           147:        void    (*pp_tlf)(struct sppp *sp);
        !           148:        /*
        !           149:         * These (optional) functions may be filled by the hardware
        !           150:         * driver if any notification of established connections
        !           151:         * (currently: IPCP up) is desired (pp_con) or any internal
        !           152:         * state change of the interface state machine should be
        !           153:         * signaled for monitoring purposes (pp_chg).
        !           154:         */
        !           155:        void    (*pp_con)(struct sppp *sp);
        !           156:        void    (*pp_chg)(struct sppp *sp, int new_state);
        !           157: };
        !           158:
        !           159: #define PP_KEEPALIVE    0x01    /* use keepalive protocol */
        !           160: #define PP_CISCO        0x02    /* use Cisco protocol instead of PPP */
        !           161:                                /* 0x04 was PP_TIMO */
        !           162: #define PP_CALLIN      0x08    /* we are being called */
        !           163: #define PP_NEEDAUTH    0x10    /* remote requested authentication */
        !           164: #define PP_NOFRAMING   0x20    /* do not add/expect encapsulation
        !           165:                                    around PPP frames (i.e. the serial
        !           166:                                    HDLC like encapsulation, RFC1662) */
        !           167:
        !           168: #define PP_MTU          1500    /* default/minimal MRU */
        !           169: #define PP_MAX_MRU     2048    /* maximal MRU we want to negotiate */
        !           170:
        !           171: /*
        !           172:  * Definitions to pass struct sppp data down into the kernel using the
        !           173:  * SIOC[SG]IFGENERIC ioctl interface.
        !           174:  *
        !           175:  * In order to use this, create a struct spppreq, fill in the cmd
        !           176:  * field with SPPPIOGDEFS, and put the address of this structure into
        !           177:  * the ifr_data portion of a struct ifreq.  Pass this struct to a
        !           178:  * SIOCGIFGENERIC ioctl.  Then replace the cmd field by SPPPIOCDEFS,
        !           179:  * modify the defs field as desired, and pass the struct ifreq now
        !           180:  * to a SIOCSIFGENERIC ioctl.
        !           181:  */
        !           182:
        !           183: #define SPPPIOGDEFS  ((caddr_t)(('S' << 24) + (1 << 16) + sizeof(struct sppp)))
        !           184: #define SPPPIOSDEFS  ((caddr_t)(('S' << 24) + (2 << 16) + sizeof(struct sppp)))
        !           185:
        !           186: struct spppreq {
        !           187:        int     cmd;
        !           188:        struct sppp defs;
        !           189: };
        !           190:
        !           191: #if defined(_KERNEL)
        !           192: void sppp_attach (struct ifnet *ifp);
        !           193: void sppp_detach (struct ifnet *ifp);
        !           194: void sppp_input (struct ifnet *ifp, struct mbuf *m);
        !           195:
        !           196: /* Workaround */
        !           197: void spppattach (struct ifnet *ifp);
        !           198: int sppp_ioctl(struct ifnet *ifp, u_long cmd, void *data);
        !           199:
        !           200: struct mbuf *sppp_dequeue (struct ifnet *ifp);
        !           201: struct mbuf *sppp_pick(struct ifnet *ifp);
        !           202: int sppp_isempty (struct ifnet *ifp);
        !           203: void sppp_flush (struct ifnet *ifp);
        !           204: #endif
        !           205: #endif /* _NET_IF_SPPP_H_ */

CVSweb