File: [local] / sys / lib / libkern / arch / sparc / bzero.S (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:15:13 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: bzero.S,v 1.3 2003/06/02 23:28:09 millert Exp $ */
/* $NetBSD: bzero.S,v 1.2 1994/10/26 06:39:54 cgd Exp $ */
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Header: bzero.s,v 1.1 92/06/25 12:52:46 torek Exp
*/
#if defined(LIBC_SCCS) && !defined(lint)
#ifdef notdef
.asciz "@(#)bzero.s 8.1 (Berkeley) 6/4/93"
#endif
.asciz "$OpenBSD: bzero.S,v 1.3 2003/06/02 23:28:09 millert Exp $"
#endif /* LIBC_SCCS and not lint */
#include "DEFS.h"
/*
* bzero(addr, len)
*
* We should unroll the loop, but at the moment this would
* gain nothing since the `std' instructions are what limits us.
*/
ENTRY(bzero)
! %o0 = addr, %o1 = len
! Optimize a common case: addr and len are both multiples of 8.
or %o0, %o1, %o2
btst 7, %o2 ! ((addr | len) & 7) != 0?
bnz 1f ! if so, cannot optimize
clr %g1 ! in any case, we want g1=0
/* `Good' operands, can just store doubles. */
0:
deccc 8, %o1 ! while ((len -= 8) >= 0)
bge,a 0b
std %g0, [%o0 + %o1] ! *(quad *)(addr + len) = 0;
retl
nop
/*
* Either the address is unaligned, or the count is not a
* multiple of 8, or both. We will have to align the address
* in order to use anything `better' than stb.
*/
1:
cmp %o1, 15 ! len >= 15?
bge,a Lstd ! yes, use std
btst 1, %o0 ! (but first check alignment)
! not enough to bother: do byte-at-a-time loop.
2:
deccc %o1 ! while (--len >= 0)
bge,a 2b
stb %g0, [%o0 + %o1] ! addr[len] = 0;
retl
nop
Lstd:
/*
* There are at least 15 bytes to zero.
* We may have to zero some initial stuff to align
* the address.
*/
bz,a 1f ! if (addr & 1) {
btst 2, %o0
stb %g0, [%o0] ! *addr = 0;
inc %o0 ! addr++;
dec %o1 ! len--;
btst 2, %o0 ! }
1:
bz,a 1f ! if (addr & 2) {
btst 4, %o0
sth %g0, [%o0] ! *(short *)addr = 0;
inc 2, %o0 ! addr += 2;
dec 2, %o1 ! len -= 2;
btst 4, %o0 ! }
1:
bz 1f ! if (addr & 4) {
dec 8, %o1
st %g0, [%o0] ! *(int *)addr = 0;
inc 4, %o0 ! addr += 4;
dec 4, %o1 ! len -= 4;
! }
/*
* Address is double word aligned; len is 8 less than
* the number of bytes remaining (i.e., len is 0 if
* the remaining count is 8, 1 if it is 9, etc.).
*/
1:
std %g0, [%o0] ! do {
2: ! *(quad *)addr = 0;
inc 8, %o0 ! addr += 8;
deccc 8, %o1 ! } while ((len -= 8) >= 0);
bge,a 2b
std %g0, [%o0]
/*
* Len is in [-8..-1] where -8 => done, -7 => 1 byte to zero,
* -6 => two bytes, etc. Mop up this remainder, if any.
*/
btst 4, %o1
bz 1f ! if (len & 4) {
btst 2, %o1
st %g0, [%o0] ! *(int *)addr = 0;
inc 4, %o0 ! addr += 4;
1:
bz 1f ! if (len & 2) {
btst 1, %o1
sth %g0, [%o0] ! *(short *)addr = 0;
inc 2, %o0 ! addr += 2;
1:
bnz,a 1f ! if (len & 1)
stb %g0, [%o0] ! *addr = 0;
1:
retl
nop