File: [local] / sys / lib / libkern / arch / sh / sdivsi3.S (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:15:14 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $NetBSD: sdivsi3.S,v 1.8 2006/05/22 20:56:44 uwe Exp $ */
/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)udivsi3.s 5.1 (Berkeley) 5/15/90
*/
#include <machine/asm.h>
/* r0 <= r4 / r5 */
NENTRY(__sdivsi3)
mov r4, r0
mov r5, r1
tst r1, r1
bt div_by_zero
mov #0, r2
div0s r2, r0
subc r3, r3
subc r2, r0
div0s r1, r3
#define DIVSTEP rotcl r0; div1 r1, r3
/* repeat 32 times */
DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP;
DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP;
DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP;
DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP; DIVSTEP;
#undef DIVSTEP
rotcl r0
rts
addc r2, r0
div_by_zero:
#ifdef _KERNEL
rts
mov #0, r0
#else
mov.l r14, @-r15
sts.l pr, @-r15
mov r15, r14
mov.l L_raise, r1
#ifdef PIC
1: bsrf r1
#else
jsr @r1
#endif
mov #8, r4 /* delay slot. 8 <- SIGFPE. */
mov #0, r0
lds.l @r15+, pr
rts
mov.l @r15+, r14
.align 2
L_raise:
#ifdef PIC
.long _C_LABEL(raise)-(1b+4)
#else
.long _C_LABEL(raise)
#endif
#endif