Return to Makefile.inc CVS log

Up to [local] / sys / lib / libkern / arch / sh

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

#	$OpenBSD: Makefile.inc,v 1.1 2006/10/06 21:19:15 mickey Exp $

SRCS+=	__main.c \
	bcmp.c imax.c imin.c lmax.c lmin.c max.c min.c random.c scanc.c \
	skpc.c strcmp.c strlen.c strncmp.c strncasecmp.c \
	strlcat.c strlcpy.c \
	strncpy.c ulmax.c ulmin.c 

SRCS+=	ffs.S movstr_i4.S sdivsi3.S udivsi3.S
SRCS+=	memchr.c memcmp.c memcpy.S memset.S

OBJS+=	bzero.o bcopy.o memmove.o
CLEANFILES+=	bzero.o bcopy.o memmove.o

bzero.o: ${M}/memset.S
	@echo "${COMPILE.c} -DBZERO ${M}/memset.S -o ${.TARGET}"
	@${COMPILE.c} -DBZERO ${M}/memset.S  -o ${.TARGET}.o
	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
	@rm -f ${.TARGET}.o

bzero.po: ${M}/memset.S
	@echo "${COMPILE.c} -DBZERO ${M}/memset.S -o ${.TARGET}"
	@${COMPILE.c} -DBZERO ${M}/memset.S -o ${.TARGET}.o
	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
	@rm -f ${.TARGET}.o

bcopy.o: ${M}/memcpy.S
	@echo "${COMPILE.c} -DBCOPY ${M}/memcpy.S -o ${.TARGET}"
	@${COMPILE.c} -DBCOPY ${M}/memcpy.S  -o ${.TARGET}.o
	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
	@rm -f ${.TARGET}.o

bcopy.po: ${M}/memcpy.S
	@echo "${COMPILE.c} -DBCOPY ${M}/memcpy.S -o ${.TARGET}"
	@${COMPILE.c} -DBCOPY ${M}/memcpy.S  -o ${.TARGET}.o
	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
	@rm -f ${.TARGET}.o

memmove.o: ${M}/memcpy.S
	@echo "${COMPILE.c} -DMEMMOVE ${M}/memcpy.S -o ${.TARGET}"
	@${COMPILE.c} -DMEMMOVE ${M}/memcpy.S  -o ${.TARGET}.o
	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
	@rm -f ${.TARGET}.o

memmove.po: ${M}/memcpy.S
	@echo "${COMPILE.c} -DMEMMOVE ${M}/memcpy.S -o ${.TARGET}"
	@${COMPILE.c} -DMEMMOVE ${M}/memcpy.S  -o ${.TARGET}.o
	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
	@rm -f ${.TARGET}.o