Return to wsmoused.h CVS log

Up to [local] / sys / dev / wscons

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/* $OpenBSD: wsmoused.h,v 1.7 2006/12/02 18:16:14 miod Exp $ */

/*
 * Copyright (c) 2001 Jean-Baptiste Marchand, Julien Montagne and Jerome Verdon
 * 
 * All rights reserved.
 *
 * This code is for mouse console support under the wscons console driver.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by
 *	Hellmuth Michaelis, Brian Dunford-Shore, Joerg Wunsch, Scott Turner
 *	and Charles Hannum.
 * 4. The name authors may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *
 */

struct wsdisplay_softc;

int wsmoused(struct wsdisplay_softc *, u_long, caddr_t, int,
		  struct proc *p);

void motion_event(u_int, int);
void button_event(int, int);
int ctrl_event(u_int, int, struct wsdisplay_softc *, struct proc *);

void mouse_moverel(char, char);

void inverse_char(unsigned short c);
void inverse_region(unsigned short start, unsigned short end);

unsigned char skip_spc_right(char);
unsigned char skip_spc_left(void);
unsigned char skip_char_right(unsigned short);
unsigned char skip_char_left(unsigned short);
unsigned char class_cmp(unsigned short, unsigned short);

void mouse_copy_start(void);
void mouse_copy_word(void);
void mouse_copy_line(void);
void mouse_copy_end(void);
void mouse_copy_extend(void);
void mouse_copy_extend_char(void);
void mouse_copy_extend_word(void);
void mouse_copy_extend_line(void);
void mouse_hide(struct wsdisplay_softc *);
void mouse_copy_extend_after(void);
void remove_selection(struct wsdisplay_softc *);
void mouse_copy_selection(void);
void mouse_paste(void);

void mouse_zaxis(int);
void allocate_copybuffer(struct wsdisplay_softc *);
void mouse_remove(struct wsdisplay_softc *);
void wsmoused_release(struct wsdisplay_softc *);
void wsmoused_wakeup(struct wsdisplay_softc *);

extern char *Copybuffer; /* buffer that contains mouse selections */
extern u_int Copybuffer_size;
extern char Paste_avail; /* flag, to indicate whether a selection is in the
			 Copy buffer */
			      
#define NO_BORDER 0
#define BORDER 1

#define WS_NCOLS(ws) ((ws)->scr_dconf->scrdata->ncols)
#define WS_NROWS(ws) ((ws)->scr_dconf->scrdata->nrows)

#define MAXCOL (WS_NCOLS(sc->sc_focus) - 1)
#define MAXROW (WS_NROWS(sc->sc_focus) - 1)

#define N_COLS 		(WS_NCOLS(sc->sc_focus))
#define N_ROWS 		(WS_NROWS(sc->sc_focus))
#define MOUSE 		(sc->sc_focus->mouse)
#define CURSOR 		(sc->sc_focus->cursor)
#define CPY_START	(sc->sc_focus->cpy_start)
#define CPY_END		(sc->sc_focus->cpy_end)
#define ORIG_START	(sc->sc_focus->orig_start)
#define ORIG_END	(sc->sc_focus->orig_end)
#define MOUSE_FLAGS	(sc->sc_focus->mouse_flags)

#define XY_TO_POS(col, row) (((row) * N_COLS) + (col))
#define POS_TO_X(pos) ((pos) % (N_COLS))
#define POS_TO_Y(pos) ((pos) / (N_COLS))

/* Shortcuts to the various display operations */
#define	GETCHAR(pos, cellp) \
	((*sc->sc_accessops->getchar) \
	    (sc->sc_accesscookie, (pos) / N_COLS, (pos) % N_COLS, cellp))
#define PUTCHAR(pos, uc, attr) \
	((*sc->sc_focus->scr_dconf->emulops->putchar) \
	    (sc->sc_focus->scr_dconf->emulcookie, ((pos) / N_COLS), \
	    ((pos) % N_COLS), (uc), (attr)))

#define MOUSE_COPY_BUTTON 	0
#define MOUSE_PASTE_BUTTON 	1
#define MOUSE_EXTEND_BUTTON	2

#define IS_ALPHANUM(c) ((c) != ' ')
#define IS_SPACE(c) ((c) == ' ')