File: [local] / sys / dev / usb / usb_port.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:14:28 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: usb_port.h,v 1.96 2007/06/17 07:53:11 mbalmer Exp $ */
/* $NetBSD: usb_port.h,v 1.62 2003/02/15 18:33:30 augustss Exp $ */
/* $FreeBSD: src/sys/dev/usb/usb_port.h,v 1.21 1999/11/17 22:33:47 n_hibma Exp $ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _USB_PORT_H
#define _USB_PORT_H
/*
* Macros to ease the import of USB drivers from other operating systems, e.g.
* NetBSD or FreeBSD.
*/
#ifdef __HAVE_GENERIC_SOFT_INTERRUPTS
#define USB_USE_SOFTINTR
#else
#undef USB_USE_SOFTINTR
#endif
#define Static
#define UMASS_ATAPISTR "atapiscsi"
/* periph_quirks */
#define PQUIRK_NOSENSE ADEV_NOSENSE /* can't REQUEST SENSE */
#define PQUIRK_ONLYBIG SDEV_ONLYBIG
#define sel_klist si_note
typedef struct proc *usb_proc_ptr;
#define UCOMBUSCF_PORTNO 0
#define UCOMBUSCF_PORTNO_DEFAULT -1
#define UHIDBUSCF_REPORTID 0
#define UHIDBUSCF_REPORTID_DEFAULT -1
#define mstohz(ms) ((ms) * hz / 1000)
#define sel_klist si_note
typedef int usb_malloc_type;
#define if_deactivate(x)
#define IF_INPUT(ifp, m) ether_input_mbuf((ifp), (m))
#define swap_bytes_change_sign16_le swap_bytes_change_sign16
#define change_sign16_swap_bytes_le change_sign16_swap_bytes
#define change_sign16_le change_sign16
#define ulinear8_to_slinear16_le ulinear8_to_linear16_le
#define ulinear8_to_slinear16_be ulinear8_to_linear16_be
#define slinear16_to_ulinear8_le linear16_to_ulinear8_le
#define slinear16_to_ulinear8_be linear16_to_ulinear8_be
typedef struct device *device_ptr_t;
#define USBBASEDEVICE struct device
#define USBDEV(bdev) (&(bdev))
#define USBDEVNAME(bdev) ((bdev).dv_xname)
#define USBDEVUNIT(bdev) ((bdev).dv_unit)
#define USBDEVPTRNAME(bdevptr) ((bdevptr)->dv_xname)
#define USBGETSOFTC(d) ((void *)(d))
#define DECLARE_USB_DMA_T \
struct usb_dma_block; \
typedef struct { \
struct usb_dma_block *block; \
u_int offs; \
} usb_dma_t
typedef struct timeout usb_callout_t;
#define usb_callout_init(h) timeout_set(&(h), NULL, NULL)
#define usb_callout(h, t, f, d) \
do { \
timeout_del(&(h)); \
timeout_set(&(h), (f), (d)); \
timeout_add(&(h), (t)); \
} while (0)
#define usb_callout_pending(h) timeout_pending(&(h))
#define usb_uncallout(h, f, d) timeout_del(&(h))
#define USB_DECLARE_DRIVER_CLASS(dname, devclass) \
int __CONCAT(dname,_match)(struct device *, void *, void *); \
void __CONCAT(dname,_attach)(struct device *, struct device *, void *); \
int __CONCAT(dname,_detach)(struct device *, int); \
int __CONCAT(dname,_activate)(struct device *, enum devact); \
\
struct cfdriver __CONCAT(dname,_cd) = { \
NULL, #dname, devclass \
}; \
\
const struct cfattach __CONCAT(dname,_ca) = { \
sizeof(struct __CONCAT(dname,_softc)), \
__CONCAT(dname,_match), \
__CONCAT(dname,_attach), \
__CONCAT(dname,_detach), \
__CONCAT(dname,_activate), \
}
#define USB_DECLARE_DRIVER(dname) USB_DECLARE_DRIVER_CLASS(dname, DV_DULL)
#define USB_MATCH(dname) \
int \
__CONCAT(dname,_match)(parent, match, aux) \
struct device *parent; \
void *match; \
void *aux;
#define USB_MATCH_START(dname, uaa) \
struct usb_attach_arg *uaa = aux
#define USB_ATTACH(dname) \
void \
__CONCAT(dname,_attach)(parent, self, aux) \
struct device *parent; \
struct device *self; \
void *aux;
#define USB_ATTACH_START(dname, sc, uaa) \
struct __CONCAT(dname,_softc) *sc = \
(struct __CONCAT(dname,_softc) *)self; \
struct usb_attach_arg *uaa = aux
/* Returns from attach */
#define USB_ATTACH_ERROR_RETURN return
#define USB_ATTACH_SUCCESS_RETURN return
#define USB_ATTACH_SETUP printf("\n")
#define USB_DETACH(dname) \
int \
__CONCAT(dname,_detach)(self, flags) \
struct device *self; \
int flags;
#define USB_DETACH_START(dname, sc) \
struct __CONCAT(dname,_softc) *sc = \
(struct __CONCAT(dname,_softc) *)self
#define USB_GET_SC_OPEN(dname, unit, sc) \
if (unit >= __CONCAT(dname,_cd).cd_ndevs) \
return (ENXIO); \
sc = __CONCAT(dname,_cd).cd_devs[unit]; \
if (sc == NULL) \
return (ENXIO)
#define USB_GET_SC(dname, unit, sc) \
sc = __CONCAT(dname,_cd).cd_devs[unit]
#define USB_DO_ATTACH(dev, bdev, parent, args, print, sub) \
(config_found_sm(parent, args, print, sub))
#endif /* _USB_PORT_H */