File: [local] / sys / dev / sbus / uperf_sbusreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:14:17 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: uperf_sbusreg.h,v 1.3 2003/06/02 18:32:41 jason Exp $ */
/*
* Copyright (c) 2002 Jason L. Wright (jason@thought.net)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* Effort sponsored in part by the Defense Advanced Research Projects
* Agency (DARPA) and Air Force Research Laboratory, Air Force
* Materiel Command, USAF, under agreement number F30602-01-2-0537.
*
*/
/*
* System Controller registers (for both uni- and dual- processor versions)
*/
/*
* Ebus interface registers
*/
#define USC_ADDR 0x0000
#define USC_DATA 0x0004
/* Indirect registers */
#define USC_CTRL 0x00 /* overall: control */
#define USC_ID 0x04 /* overall: identity */
#define USC_PERF0 0x08 /* overall: perf counter 0 */
#define USC_PERF1 0x0c /* overall: perf connter 1 */
#define USC_PERFSHAD 0x10 /* overall: perf shadow */
#define USC_PERFCTRL 0x20 /* overall: perf control */
#define USC_DBGPIN 0x30 /* overall: debug pin control */
#define USC_P0CFG 0x40 /* port/processor 1 config */
#define USC_P0STS 0x44 /* port/processor 0 status */
#define USC_P1CFG 0x48 /* port/processor 1 config */
#define USC_P1STS 0x4c /* port/processor 1 status */
#define USC_SYSIOCFG 0x50 /* sysio/u2s port config */
#define USC_SYSIOSTS 0x54 /* sysio/u2s port status */
#define USC_FFBCFG 0x58 /* dsc: ffb config */
#define USC_FFBSTS 0x5c /* dsc: ffb status */
#define USC_MCCTRL0 0x60 /* usc: memory control 0 */
#define USC_MCCTRL1 0x64 /* usc: memory control 1 */
#define USC_CCDIAG 0x70 /* dsc: */
#define USC_CCVEC 0x74 /* dsc: */
#define USC_CCFLT 0x78 /* dsc: */
#define USC_CCPRC 0x7c /* dsc: */
#define USC_MEM0 0x80 /* dsc: mem control 0 */
#define USC_MEM1 0x84 /* dsc: RAS control */
#define USC_MEM2 0x88 /* dsc: CAS_RD control */
#define USC_MEM3 0x8c /* dsc: Bank_Sel control */
#define USC_MEM4 0x90 /* dsc: BMX_Buffer control */
#define USC_MEM5 0x94 /* dsc: CAS_WR control */
#define USC_MEM6 0x98 /* dsc: Phase_Level control */
#define USC_MEM7 0x9c /* dsc: SIMM_Busy_Rd control */
#define USC_MEM8 0xa0 /* dsc: Count_Control */
#define USC_MEM9 0xa4 /* dsc: Refresh control */
#define USC_MEMA 0xa8 /* dsc: Row control */
#define USC_MEMB 0xac /* dsc: guess! */
#define USC_CTRL_POR 0x80000000 /* power on reset */
#define USC_CTRL_SFTPOR 0x40000000 /* last reset was soft */
#define USC_CTRL_XIR 0x20000000 /* initiate XIR */
#define USC_CTRL_BPOR 0x10000000 /* last reset was scan */
#define USC_CTRL_BXIR 0x08000000 /* last reset was xir */
#define USC_CTRL_WAKEUP 0x04000000 /* last reset was wakeup */
#define USC_CTRL_FATAL 0x02000000 /* fatal error detect */
#define USC_CTRL_IAP 0x00800000 /* inv parity on addr bus */
#define USC_CTRL_ENWKUP 0x00400000 /* enable wakeup POR */
#define USC_ID_JEDEC 0xffff0000 /* JEDEC ID */
#define USC_ID_UPANUM_M 0x0000f000 /* #UPA ports supported mask */
#define USC_ID_UPANUM_S 12 /* #UPA ports supported shift */
#define USC_ID_IMPL_M 0x000000f0 /* implementation # mask */
#define USC_ID_IMPL_S 4 /* implementation # shift */
#define USC_ID_VERS_M 0x0000000f /* version mask */
#define USC_ID_VERS_S 0 /* version shift */
#define USC_PCTRL_CLR1 0x00008000 /* clear cntr in SEL1 */
#define USC_PCTRL_SEL1 0x00000f00 /* event source 1 */
#define USC_PCTRL_CLR0 0x00000080 /* clear cntrl in SEL0 */
#define USC_PCTRL_SEL0 0x0000000f /* event source 0 */
/* Event sources, counter 0 */
#define SEL0_SYSCK 0x00000000 /* system clock count */
#define SEL0_PRALL 0x00000001 /* prequests, all sources */
#define SEL0_PRP0 0x00000002 /* prequests, proc 0 */
#define SEL0_PRUS 0x00000004 /* prequests, u2s */
#define SEL0_128BUSY 0x00000005 /* # of cycles 128bit UPA busy */
#define SEL0_64BUSY 0x00000006 /* # of cycles 64bit UPA busy */
#define SEL0_PIOSTALL 0x00000007 /* # cycles stalled during PIO */
#define SEL0_MEMREQ 0x00000008 /* # memory requests issued */
#define SEL0_MCBUSY 0x00000009 /* # cycles memory controller busy */
#define SEL0_PENDSTALL 0x0000000a /* # stalls pending xact scbd hit */
#define SEL0_CWMRP0 0x0000000b /* # coherent write miss req, prc0 */
#define SEL0_CWMRP1 0x0000000c /* # coherent write miss req, prc1 */
#define SEL0_CIT 0x0000000d /* # coherent intervene xacts */
#define SEL0_DACT 0x0000000e /* # data transactions from u2s */
#define SEL0_CRXI 0x0000000f /* # coherent read xacts issued */
/* Event sources, counter 1 */
#define SEL1_SYSCK 0x00000000 /* system clock count */
#define SEL1_PRALL 0x00000001 /* prequests, all sources */
#define SEL1_PRP0 0x00000002 /* prequests, proc 0 */
#define SEL1_PRUS 0x00000004 /* prequests, u2s */
#define SEL1_RDP0 0x00000005 /* read reqs from P0 */
#define SEL1_CRMP0 0x00000006 /* coherent read misses from P0 */
#define SEL1_PIOP0 0x00000007 /* PIO accesses from P0 */
#define SEL1_MRI 0x00000008 /* memory reqs issued */
#define SEL1_MRC 0x00000009 /* memory reqs complete */
#define SEL1_RDP1 0x0000000a /* read reqs from P1 */
#define SEL1_CRMP1 0x0000000b /* coherent read misses from P1 */
#define SEL1_PIOP1 0x0000000c /* PIO accesses from P1 */
#define SEL1_CWXI 0x0000000d /* coherent write xacts issued */
#define SEL1_DXU 0x0000000e /* # data xacts from u2s */
/* Port config (USC_P0CFG, USC_P1CFG, USC_SYSIOCFG, USC_FFBCFG) */
#define USC_PCFG_MD 0x80000000 /* master disable */
#define USC_PCFG_SSLP 0x40000000 /* slave sleep */
#define USC_PCFG_SPRQS 0x0f000000 /* slave prequest queue size */
#define USC_PCFG_SIQS 0x00030000 /* slave interrupt queue size */
#define USC_PCFG_SQEN 0x00008000 /* qualifies writes to SPRQS,SIQS */
#define USC_PCFG_ONER 0x00004000 /* one read */
/* Port status (USC_P0STS, USC_P1STS, USC_SYSIOSTS, USC_FFBSTS) */
#define USC_PSTS_FATAL 0x80000000 /* fatal error detected */
#define USC_PSTS_IADDR 0x40000000 /* invalid address */
#define USC_PSTS_IPORT 0x20000000 /* invalid port */
#define USC_PSTS_IPRTY 0x10000000 /* parity error */
#define USC_PSTS_MC0OF 0x08000000 /* master class 0 overflow */
#define USC_PSTS_MC1OF 0x04000000 /* master class 1 overflow */
#define USC_PSTS_MCQ0 0x03800000 /* # reqs before mc0 overflow */
#define USC_PSTS_MC1Q 0x00700000 /* # reqs before mc1 overflow */
/* usc: memory control 0 */
#define USC_MC0_REFEN 0x80000000 /* refresh enable */
#define USC_MC0_SIMP 0x0000ff00 /* simms present */
#define USC_MC0_REFI 0x000000ff /* refresh interval */
/* usc: memory control 1 */
#define USC_MC1_CSR 0x00001000 /* CAS-to-RAS delay for CBR ref cyc */
#define USC_MC1_WPC1 0x00000c00 /* page cycle 1 write */
#define USC_MC1_RCD 0x00000200 /* RAS-to-CAS delay */
#define USC_MC1_CP 0x00000100 /* CAS precharge */
#define USC_MC1_RP 0x000000c0 /* RAS precharge */
#define USC_MC1_RAS 0x00000030 /* length of RAS for precharge */
#define USC_MC1_PC0 0x0000000c /* page cycle 0 */
#define USC_MC1_PC1 0x00000003 /* page cycle 1 */
/* dsc: memory control 0 */
#define USC_MEM0_REFE 0x80000000 /* refresh enable */
#define USC_MEM0_FSME 0x10000000 /* fsm error */
#define USC_MEM0_PPE 0x08000000 /* ping-pong buffer error */
#define USC_MEM0_DPSE 0x04000000 /* data path scheduler error */
#define USC_MEM0_MCE 0x02000000 /* memory controller error */
#define USC_MEM0_MRE 0x01000000 /* missed refresh error */
#define USC_MEM0_RPMC 0x00800000 /* RAS Phi 0 cookie for refresh */
#define USC_MEM0_RWMC 0x00400000 /* RAS Phi 0 cookie for writers */
#define USC_MEM0_SW0 0x001f0000 /* strecth count for first write */
#define USC_MEM0_SP 0x00000f00 /* simm present mask */
#define USC_MEM0_REFI 0x000000ff /* refresh interval */
/* cache coherence diagnostic: USC_CCDIAG */
#define USC_CCDIAG_SNP 0xffff0000 /* SRAM address */
#define USC_CCDIAG_DME 0x00008000 /* enable writes to DTAG */
/* cache coherence snoop vector: USC_CCVEC */
#define USC_CCVEC_TAG 0x7ff80000 /* tag portion of SRAM data */
#define USC_CCVEC_ST 0x00060000 /* state portion of SRAM data */
#define USC_CCVEC_PAR 0x00010000 /* parity portion of SRAM data */
/* cache coherence fault: USC_CCFLT */
#define USC_CCFLT_PERR0 0x80000000 /* dual tag parity error, proc 0 */
#define USC_CCFLT_CERR0 0x40000000 /* coherence error, proc 0 */
#define USC_CCFLT_PERR1 0x20000000 /* dual tag parity error, proc 1 */
#define USC_CCFLT_CERR1 0x10000000 /* coherence error, proc 1 */
#define USC_CCFLT_IDX 0x0fffe000 /* index of fault */
/* cache coherence processor index: USC_CCPRC */
#define USC_CCPRC_PIDX 0x7fffffff /* address mask for ports 1 & 2 */