Annotation of sys/dev/sbus/esp_sbus.c, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: esp_sbus.c,v 1.20 2007/04/10 17:47:55 miod Exp $ */
2: /* $NetBSD: esp_sbus.c,v 1.14 2001/04/25 17:53:37 bouyer Exp $ */
3:
4: /*-
5: * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
6: * All rights reserved.
7: *
8: * This code is derived from software contributed to The NetBSD Foundation
9: * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace
10: * Simulation Facility, NASA Ames Research Center; Paul Kranenburg.
11: *
12: * Redistribution and use in source and binary forms, with or without
13: * modification, are permitted provided that the following conditions
14: * are met:
15: * 1. Redistributions of source code must retain the above copyright
16: * notice, this list of conditions and the following disclaimer.
17: * 2. Redistributions in binary form must reproduce the above copyright
18: * notice, this list of conditions and the following disclaimer in the
19: * documentation and/or other materials provided with the distribution.
20: * 3. All advertising materials mentioning features or use of this software
21: * must display the following acknowledgement:
22: * This product includes software developed by the NetBSD
23: * Foundation, Inc. and its contributors.
24: * 4. Neither the name of The NetBSD Foundation nor the names of its
25: * contributors may be used to endorse or promote products derived
26: * from this software without specific prior written permission.
27: *
28: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
29: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
30: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
31: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
32: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
33: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
34: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
35: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
36: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
37: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38: * POSSIBILITY OF SUCH DAMAGE.
39: */
40:
41: #include <sys/types.h>
42: #include <sys/param.h>
43: #include <sys/systm.h>
44: #include <sys/device.h>
45: #include <sys/buf.h>
46: #include <sys/malloc.h>
47:
48: #include <scsi/scsi_all.h>
49: #include <scsi/scsiconf.h>
50: #include <scsi/scsi_message.h>
51:
52: #include <machine/bus.h>
53: #include <machine/intr.h>
54: #include <machine/autoconf.h>
55:
56: #include <dev/ic/lsi64854reg.h>
57: #include <dev/ic/lsi64854var.h>
58:
59: #include <dev/ic/ncr53c9xreg.h>
60: #include <dev/ic/ncr53c9xvar.h>
61:
62: #include <dev/sbus/sbusvar.h>
63:
64: struct scsi_adapter esp_switch = {
65: ncr53c9x_scsi_cmd,
66: minphys, /* no max at this level; handled by DMA code */
67: NULL,
68: NULL,
69: };
70:
71: struct scsi_device esp_dev = {
72: NULL, /* Use default error handler */
73: NULL, /* have a queue, served by this */
74: NULL, /* have no async handler */
75: NULL, /* Use default 'done' routine */
76: };
77:
78: /* #define ESP_SBUS_DEBUG */
79:
80: static int esp_unit_offset;
81:
82: struct esp_softc {
83: struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */
84:
85: bus_space_tag_t sc_bustag;
86: bus_dma_tag_t sc_dmatag;
87:
88: bus_space_handle_t sc_reg; /* the registers */
89: struct lsi64854_softc *sc_dma; /* pointer to my dma */
90:
91: int sc_pri; /* SBUS priority */
92: };
93:
94: void espattach_sbus(struct device *, struct device *, void *);
95: void espattach_dma(struct device *, struct device *, void *);
96: int espmatch_sbus(struct device *, void *, void *);
97:
98:
99: /* Linkup to the rest of the kernel */
100: struct cfattach esp_sbus_ca = {
101: sizeof(struct esp_softc), espmatch_sbus, espattach_sbus
102: };
103: struct cfattach esp_dma_ca = {
104: sizeof(struct esp_softc), espmatch_sbus, espattach_dma
105: };
106:
107: /*
108: * Functions and the switch for the MI code.
109: */
110: static u_char esp_read_reg(struct ncr53c9x_softc *, int);
111: static void esp_write_reg(struct ncr53c9x_softc *, int, u_char);
112: static u_char esp_rdreg1(struct ncr53c9x_softc *, int);
113: static void esp_wrreg1(struct ncr53c9x_softc *, int, u_char);
114: static int esp_dma_isintr(struct ncr53c9x_softc *);
115: static void esp_dma_reset(struct ncr53c9x_softc *);
116: static int esp_dma_intr(struct ncr53c9x_softc *);
117: static int esp_dma_setup(struct ncr53c9x_softc *, caddr_t *,
118: size_t *, int, size_t *);
119: static void esp_dma_go(struct ncr53c9x_softc *);
120: static void esp_dma_stop(struct ncr53c9x_softc *);
121: static int esp_dma_isactive(struct ncr53c9x_softc *);
122:
123: static struct ncr53c9x_glue esp_sbus_glue = {
124: esp_read_reg,
125: esp_write_reg,
126: esp_dma_isintr,
127: esp_dma_reset,
128: esp_dma_intr,
129: esp_dma_setup,
130: esp_dma_go,
131: esp_dma_stop,
132: esp_dma_isactive,
133: NULL, /* gl_clear_latched_intr */
134: };
135:
136: static struct ncr53c9x_glue esp_sbus_glue1 = {
137: esp_rdreg1,
138: esp_wrreg1,
139: esp_dma_isintr,
140: esp_dma_reset,
141: esp_dma_intr,
142: esp_dma_setup,
143: esp_dma_go,
144: esp_dma_stop,
145: esp_dma_isactive,
146: NULL, /* gl_clear_latched_intr */
147: };
148:
149: static void espattach(struct esp_softc *, struct ncr53c9x_glue *);
150:
151: int
152: espmatch_sbus(struct device *parent, void *vcf, void *aux)
153: {
154: struct cfdata *cf = vcf;
155: int rv;
156: struct sbus_attach_args *sa = aux;
157:
158: if (strcmp("SUNW,fas", sa->sa_name) == 0)
159: return 1;
160:
161: rv = (strcmp(cf->cf_driver->cd_name, sa->sa_name) == 0 ||
162: strcmp("ptscII", sa->sa_name) == 0);
163: return (rv);
164: }
165:
166: void
167: espattach_sbus(struct device *parent, struct device *self, void *aux)
168: {
169: struct esp_softc *esc = (void *)self;
170: struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
171: struct sbus_attach_args *sa = aux;
172: struct lsi64854_softc *lsc;
173: int burst, sbusburst;
174:
175: esc->sc_bustag = sa->sa_bustag;
176: esc->sc_dmatag = sa->sa_dmatag;
177:
178: sc->sc_id = getpropint(sa->sa_node, "initiator-id", 7);
179: sc->sc_freq = getpropint(sa->sa_node, "clock-frequency", -1);
180: if (sc->sc_freq < 0)
181: sc->sc_freq = sa->sa_frequency;
182:
183: #ifdef ESP_SBUS_DEBUG
184: printf("%s: espattach_sbus: sc_id %d, freq %d\n",
185: self->dv_xname, sc->sc_id, sc->sc_freq);
186: #endif
187:
188: if (strcmp("SUNW,fas", sa->sa_name) == 0) {
189: /*
190: * offset searches for other esp/dma devices.
191: */
192: esp_unit_offset++;
193:
194: /*
195: * fas has 2 register spaces: dma(lsi64854) and SCSI core (ncr53c9x)
196: */
197: if (sa->sa_nreg != 2) {
198: printf("%s: %d register spaces\n", self->dv_xname, sa->sa_nreg);
199: return;
200: }
201:
202: /*
203: * allocate space for dma, in SUNW,fas there are no separate
204: * dma device
205: */
206: lsc = malloc(sizeof (struct lsi64854_softc), M_DEVBUF, M_NOWAIT);
207:
208: if (lsc == NULL) {
209: printf("%s: out of memory (lsi64854_softc)\n",
210: self->dv_xname);
211: return;
212: }
213: esc->sc_dma = lsc;
214:
215: lsc->sc_bustag = sa->sa_bustag;
216: lsc->sc_dmatag = sa->sa_dmatag;
217:
218: bcopy(sc->sc_dev.dv_xname, lsc->sc_dev.dv_xname,
219: sizeof (lsc->sc_dev.dv_xname));
220:
221: /* Map dma registers */
222: if (sbus_bus_map(sa->sa_bustag, sa->sa_reg[0].sbr_slot,
223: sa->sa_reg[0].sbr_offset, sa->sa_reg[0].sbr_size,
224: 0, 0, &lsc->sc_regs) != 0) {
225: printf("%s: cannot map dma registers\n", self->dv_xname);
226: return;
227: }
228:
229: /*
230: * XXX is this common(from bpp.c), the same in dma_sbus...etc.
231: *
232: * Get transfer burst size from PROM and plug it into the
233: * controller registers. This is needed on the Sun4m; do
234: * others need it too?
235: */
236: sbusburst = ((struct sbus_softc *)parent)->sc_burst;
237: if (sbusburst == 0)
238: sbusburst = SBUS_BURST_32 - 1; /* 1->16 */
239:
240: burst = getpropint(sa->sa_node, "burst-sizes", -1);
241:
242: #ifdef ESP_SBUS_DEBUG
243: printf("espattach_sbus: burst 0x%x, sbus 0x%x\n",
244: burst, sbusburst);
245: #endif
246:
247: if (burst == -1)
248: /* take SBus burst sizes */
249: burst = sbusburst;
250:
251: /* Clamp at parent's burst sizes */
252: burst &= sbusburst;
253: lsc->sc_burst = (burst & SBUS_BURST_32) ? 32 :
254: (burst & SBUS_BURST_16) ? 16 : 0;
255:
256: lsc->sc_channel = L64854_CHANNEL_SCSI;
257: lsc->sc_client = sc;
258:
259: lsi64854_attach(lsc);
260:
261: /*
262: * map SCSI core registers
263: */
264: if (sbus_bus_map(sa->sa_bustag, sa->sa_reg[1].sbr_slot,
265: sa->sa_reg[1].sbr_offset, sa->sa_reg[1].sbr_size,
266: 0, 0, &esc->sc_reg) != 0) {
267: printf("%s: cannot map scsi core registers\n",
268: self->dv_xname);
269: return;
270: }
271:
272: if (sa->sa_nintr == 0) {
273: printf("%s: no interrupt property\n", self->dv_xname);
274: return;
275: }
276:
277: esc->sc_pri = sa->sa_pri;
278:
279: printf("%s", self->dv_xname);
280: espattach(esc, &esp_sbus_glue);
281:
282: return;
283: }
284:
285: /*
286: * Find the DMA by poking around the dma device structures
287: *
288: * What happens here is that if the dma driver has not been
289: * configured, then this returns a NULL pointer. Then when the
290: * dma actually gets configured, it does the opposing test, and
291: * if the sc->sc_esp field in its softc is NULL, then tries to
292: * find the matching esp driver.
293: */
294: esc->sc_dma = (struct lsi64854_softc *)
295: getdevunit("dma", sc->sc_dev.dv_unit - esp_unit_offset);
296:
297: /*
298: * and a back pointer to us, for DMA
299: */
300: if (esc->sc_dma)
301: esc->sc_dma->sc_client = sc;
302: else {
303: printf("\n");
304: panic("espattach: no dma found");
305: }
306:
307: /*
308: * The `ESC' DMA chip must be reset before we can access
309: * the esp registers.
310: */
311: if (esc->sc_dma->sc_rev == DMAREV_ESC)
312: DMA_RESET(esc->sc_dma);
313:
314: /*
315: * Map my registers in, if they aren't already in virtual
316: * address space.
317: */
318: if (sa->sa_npromvaddrs) {
319: if (bus_space_map(sa->sa_bustag, sa->sa_promvaddrs[0],
320: sa->sa_size, BUS_SPACE_MAP_PROMADDRESS,
321: &esc->sc_reg) != 0) {
322: printf("%s @ sbus: cannot map registers\n",
323: self->dv_xname);
324: return;
325: }
326: } else {
327: if (sbus_bus_map(sa->sa_bustag, sa->sa_slot,
328: sa->sa_offset, sa->sa_size, 0, 0, &esc->sc_reg) != 0) {
329: printf("%s @ sbus: cannot map registers\n",
330: self->dv_xname);
331: return;
332: }
333: }
334:
335: if (sa->sa_nintr == 0) {
336: /*
337: * No interrupt properties: we quit; this might
338: * happen on e.g. a Sparc X terminal.
339: */
340: printf("\n%s: no interrupt property\n", self->dv_xname);
341: return;
342: }
343:
344: esc->sc_pri = sa->sa_pri;
345:
346: if (strcmp("ptscII", sa->sa_name) == 0) {
347: espattach(esc, &esp_sbus_glue1);
348: } else {
349: espattach(esc, &esp_sbus_glue);
350: }
351: }
352:
353: void
354: espattach_dma(struct device *parent, struct device *self, void *aux)
355: {
356: struct esp_softc *esc = (void *)self;
357: struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
358: struct sbus_attach_args *sa = aux;
359:
360: if (strcmp("ptscII", sa->sa_name) == 0) {
361: return;
362: }
363:
364: esc->sc_bustag = sa->sa_bustag;
365: esc->sc_dmatag = sa->sa_dmatag;
366:
367: sc->sc_id = getpropint(sa->sa_node, "initiator-id", 7);
368: sc->sc_freq = getpropint(sa->sa_node, "clock-frequency", -1);
369:
370: esc->sc_dma = (struct lsi64854_softc *)parent;
371: esc->sc_dma->sc_client = sc;
372:
373: /*
374: * Map my registers in, if they aren't already in virtual
375: * address space.
376: */
377: if (sa->sa_npromvaddrs) {
378: if (bus_space_map(sa->sa_bustag, sa->sa_promvaddrs[0],
379: sa->sa_size /* ??? */, BUS_SPACE_MAP_PROMADDRESS,
380: &esc->sc_reg) != 0) {
381: printf("%s @ dma: cannot map registers\n",
382: self->dv_xname);
383: return;
384: }
385: } else {
386: if (sbus_bus_map(sa->sa_bustag, sa->sa_slot, sa->sa_offset,
387: sa->sa_size, 0, 0, &esc->sc_reg) != 0) {
388: printf("%s @ dma: cannot map registers\n",
389: self->dv_xname);
390: return;
391: }
392: }
393:
394: if (sa->sa_nintr == 0) {
395: /*
396: * No interrupt properties: we quit; this might
397: * happen on e.g. a Sparc X terminal.
398: */
399: printf("\n%s: no interrupt property\n", self->dv_xname);
400: return;
401: }
402:
403: esc->sc_pri = sa->sa_pri;
404:
405: espattach(esc, &esp_sbus_glue);
406: }
407:
408:
409: /*
410: * Attach this instance, and then all the sub-devices
411: */
412: void
413: espattach(struct esp_softc *esc, struct ncr53c9x_glue *gluep)
414: {
415: struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
416: void *icookie;
417: unsigned int uid = 0;
418:
419: /*
420: * Set up glue for MI code early; we use some of it here.
421: */
422: sc->sc_glue = gluep;
423:
424: /* gimme MHz */
425: sc->sc_freq /= 1000000;
426:
427: /*
428: * XXX More of this should be in ncr53c9x_attach(), but
429: * XXX should we really poke around the chip that much in
430: * XXX the MI code? Think about this more...
431: */
432:
433: /*
434: * It is necessary to try to load the 2nd config register here,
435: * to find out what rev the esp chip is, else the ncr53c9x_reset
436: * will not set up the defaults correctly.
437: */
438: sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
439: sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE;
440: sc->sc_cfg3 = NCRCFG3_CDB;
441: NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
442:
443: if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) !=
444: (NCRCFG2_SCSI2 | NCRCFG2_RPE)) {
445: sc->sc_rev = NCR_VARIANT_ESP100;
446: } else {
447: sc->sc_cfg2 = NCRCFG2_SCSI2;
448: NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
449: sc->sc_cfg3 = 0;
450: NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
451: sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK);
452: NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
453: if (NCR_READ_REG(sc, NCR_CFG3) !=
454: (NCRCFG3_CDB | NCRCFG3_FCLK)) {
455: sc->sc_rev = NCR_VARIANT_ESP100A;
456: } else {
457: /* NCRCFG2_FE enables > 64K transfers */
458: sc->sc_cfg2 |= NCRCFG2_FE;
459: sc->sc_cfg3 = 0;
460: NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
461: sc->sc_rev = NCR_VARIANT_ESP200;
462:
463: /* XXX spec says it's valid after power up or chip reset */
464: uid = NCR_READ_REG(sc, NCR_UID);
465: if (((uid & 0xf8) >> 3) == 0x0a) /* XXX */
466: sc->sc_rev = NCR_VARIANT_FAS366;
467: }
468: }
469:
470: #ifdef ESP_SBUS_DEBUG
471: printf("espattach: revision %d, uid 0x%x\n", sc->sc_rev, uid);
472: #endif
473:
474: /*
475: * XXX minsync and maxxfer _should_ be set up in MI code,
476: * XXX but it appears to have some dependency on what sort
477: * XXX of DMA we're hooked up to, etc.
478: */
479:
480: /*
481: * This is the value used to start sync negotiations
482: * Note that the NCR register "SYNCTP" is programmed
483: * in "clocks per byte", and has a minimum value of 4.
484: * The SCSI period used in negotiation is one-fourth
485: * of the time (in nanoseconds) needed to transfer one byte.
486: * Since the chip's clock is given in MHz, we have the following
487: * formula: 4 * period = (1000 / freq) * 4
488: */
489: sc->sc_minsync = 1000 / sc->sc_freq;
490:
491: /*
492: * Alas, we must now modify the value a bit, because it's
493: * only valid when can switch on FASTCLK and FASTSCSI bits
494: * in config register 3...
495: */
496: switch (sc->sc_rev) {
497: case NCR_VARIANT_ESP100:
498: sc->sc_maxxfer = 64 * 1024;
499: sc->sc_minsync = 0; /* No synch on old chip? */
500: break;
501:
502: case NCR_VARIANT_ESP100A:
503: sc->sc_maxxfer = 64 * 1024;
504: /* Min clocks/byte is 5 */
505: sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5);
506: break;
507:
508: case NCR_VARIANT_ESP200:
509: case NCR_VARIANT_FAS366:
510: sc->sc_maxxfer = 16 * 1024 * 1024;
511: /* XXX - do actually set FAST* bits */
512: break;
513: }
514:
515: /* Establish interrupt channel */
516: icookie = bus_intr_establish(esc->sc_bustag, esc->sc_pri, IPL_BIO, 0,
517: ncr53c9x_intr, sc, sc->sc_dev.dv_xname);
518:
519: /* Turn on target selection using the `dma' method */
520: if (sc->sc_rev != NCR_VARIANT_FAS366)
521: sc->sc_features |= NCR_F_DMASELECT;
522:
523: /* Do the common parts of attachment. */
524: ncr53c9x_attach(sc, &esp_switch, &esp_dev);
525: }
526:
527: /*
528: * Glue functions.
529: */
530:
531: #ifdef ESP_SBUS_DEBUG
532: int esp_sbus_debug = 0;
533:
534: static struct {
535: char *r_name;
536: int r_flag;
537: } esp__read_regnames [] = {
538: { "TCL", 0}, /* 0/00 */
539: { "TCM", 0}, /* 1/04 */
540: { "FIFO", 0}, /* 2/08 */
541: { "CMD", 0}, /* 3/0c */
542: { "STAT", 0}, /* 4/10 */
543: { "INTR", 0}, /* 5/14 */
544: { "STEP", 0}, /* 6/18 */
545: { "FFLAGS", 1}, /* 7/1c */
546: { "CFG1", 1}, /* 8/20 */
547: { "STAT2", 0}, /* 9/24 */
548: { "CFG4", 1}, /* a/28 */
549: { "CFG2", 1}, /* b/2c */
550: { "CFG3", 1}, /* c/30 */
551: { "-none", 1}, /* d/34 */
552: { "TCH", 1}, /* e/38 */
553: { "TCX", 1}, /* f/3c */
554: };
555:
556: static struct {
557: char *r_name;
558: int r_flag;
559: } esp__write_regnames[] = {
560: { "TCL", 1}, /* 0/00 */
561: { "TCM", 1}, /* 1/04 */
562: { "FIFO", 0}, /* 2/08 */
563: { "CMD", 0}, /* 3/0c */
564: { "SELID", 1}, /* 4/10 */
565: { "TIMEOUT", 1}, /* 5/14 */
566: { "SYNCTP", 1}, /* 6/18 */
567: { "SYNCOFF", 1}, /* 7/1c */
568: { "CFG1", 1}, /* 8/20 */
569: { "CCF", 1}, /* 9/24 */
570: { "TEST", 1}, /* a/28 */
571: { "CFG2", 1}, /* b/2c */
572: { "CFG3", 1}, /* c/30 */
573: { "-none", 1}, /* d/34 */
574: { "TCH", 1}, /* e/38 */
575: { "TCX", 1}, /* f/3c */
576: };
577: #endif
578:
579: u_char
580: esp_read_reg(struct ncr53c9x_softc *sc, int reg)
581: {
582: struct esp_softc *esc = (struct esp_softc *)sc;
583: u_char v;
584:
585: v = bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg * 4);
586: #ifdef ESP_SBUS_DEBUG
587: if (esp_sbus_debug && (reg < 0x10) && esp__read_regnames[reg].r_flag)
588: printf("RD:%x <%s> %x\n", reg * 4,
589: ((unsigned)reg < 0x10) ? esp__read_regnames[reg].r_name : "<***>", v);
590: #endif
591: return v;
592: }
593:
594: void
595: esp_write_reg(struct ncr53c9x_softc *sc, int reg, u_char v)
596: {
597: struct esp_softc *esc = (struct esp_softc *)sc;
598:
599: #ifdef ESP_SBUS_DEBUG
600: if (esp_sbus_debug && (reg < 0x10) && esp__write_regnames[reg].r_flag)
601: printf("WR:%x <%s> %x\n", reg * 4,
602: ((unsigned)reg < 0x10) ? esp__write_regnames[reg].r_name : "<***>", v);
603: #endif
604: bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg * 4, v);
605: }
606:
607: u_char
608: esp_rdreg1(struct ncr53c9x_softc *sc, int reg)
609: {
610: struct esp_softc *esc = (struct esp_softc *)sc;
611:
612: return (bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg));
613: }
614:
615: void
616: esp_wrreg1(struct ncr53c9x_softc *sc, int reg, u_char v)
617: {
618: struct esp_softc *esc = (struct esp_softc *)sc;
619:
620: bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg, v);
621: }
622:
623: int
624: esp_dma_isintr(struct ncr53c9x_softc *sc)
625: {
626: struct esp_softc *esc = (struct esp_softc *)sc;
627:
628: return (DMA_ISINTR(esc->sc_dma));
629: }
630:
631: void
632: esp_dma_reset(struct ncr53c9x_softc *sc)
633: {
634: struct esp_softc *esc = (struct esp_softc *)sc;
635:
636: DMA_RESET(esc->sc_dma);
637: }
638:
639: int
640: esp_dma_intr(struct ncr53c9x_softc *sc)
641: {
642: struct esp_softc *esc = (struct esp_softc *)sc;
643:
644: return (DMA_INTR(esc->sc_dma));
645: }
646:
647: int
648: esp_dma_setup(struct ncr53c9x_softc *sc, caddr_t *addr, size_t *len,
649: int datain, size_t *dmasize)
650: {
651: struct esp_softc *esc = (struct esp_softc *)sc;
652:
653: return (DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize));
654: }
655:
656: void
657: esp_dma_go(struct ncr53c9x_softc *sc)
658: {
659: struct esp_softc *esc = (struct esp_softc *)sc;
660:
661: DMA_GO(esc->sc_dma);
662: }
663:
664: void
665: esp_dma_stop(struct ncr53c9x_softc *sc)
666: {
667: struct esp_softc *esc = (struct esp_softc *)sc;
668: u_int32_t csr;
669:
670: csr = L64854_GCSR(esc->sc_dma);
671: csr &= ~D_EN_DMA;
672: L64854_SCSR(esc->sc_dma, csr);
673: }
674:
675: int
676: esp_dma_isactive(struct ncr53c9x_softc *sc)
677: {
678: struct esp_softc *esc = (struct esp_softc *)sc;
679:
680: return (DMA_ISACTIVE(esc->sc_dma));
681: }
682:
683: #if defined(DDB) && defined(notyet)
684: #include <machine/db_machdep.h>
685: #include <ddb/db_output.h>
686:
687: void db_esp(db_expr_t, int, db_expr_t, char *);
688:
689: void
690: db_esp(db_expr_t addr, int have_addr, db_expr_t count, char *modif)
691: {
692: struct ncr53c9x_softc *sc;
693: struct ncr53c9x_ecb *ecb;
694: struct ncr53c9x_linfo *li;
695: int u, t, i;
696:
697: for (u=0; u<10; u++) {
698: sc = (struct ncr53c9x_softc *)
699: getdevunit("esp", u);
700: if (!sc) continue;
701:
702: db_printf("esp%d: nexus %p phase %x prev %x dp %p dleft %lx ify %x\n",
703: u, sc->sc_nexus, sc->sc_phase, sc->sc_prevphase,
704: sc->sc_dp, sc->sc_dleft, sc->sc_msgify);
705: db_printf("\tmsgout %x msgpriq %x msgin %x:%x:%x:%x:%x\n",
706: sc->sc_msgout, sc->sc_msgpriq, sc->sc_imess[0],
707: sc->sc_imess[1], sc->sc_imess[2], sc->sc_imess[3],
708: sc->sc_imess[0]);
709: db_printf("ready: ");
710: TAILQ_FOREACH(ecb, &sc->ready_list, chain) {
711: db_printf("ecb %p ", ecb);
712: if (ecb == TAILQ_NEXT(ecb, chain)) {
713: db_printf("\nWARNING: tailq loop on ecb %p", ecb);
714: break;
715: }
716: }
717: db_printf("\n");
718:
719: for (t=0; t<NCR_NTARG; t++) {
720: LIST_FOREACH(li, &sc->sc_tinfo[t].luns, link) {
721: db_printf("t%d lun %d untagged %p busy %d used %x\n",
722: t, (int)li->lun, li->untagged, li->busy,
723: li->used);
724: for (i=0; i<256; i++)
725: if ((ecb = li->queued[i])) {
726: db_printf("ecb %p tag %x\n", ecb, i);
727: }
728: }
729: }
730: }
731: }
732: #endif
733:
CVSweb