Return to if_maloreg.h CVS log | Up to [local] / sys / dev / pcmcia |
File: [local] / sys / dev / pcmcia / if_maloreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:14:08 2008 UTC (16 years, 6 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: if_maloreg.h,v 1.14 2007/08/09 14:50:06 mglocker Exp $ */ /* * Copyright (c) 2007 Marcus Glocker <mglocker@openbsd.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* registers */ #define MALO_REG_HOST_STATUS 0x00 #define MALO_REG_CARD_INTR_CAUSE 0x02 #define MALO_REG_HOST_INTR_MASK 0x04 #define MALO_REG_DATA_READ 0x10 #define MALO_REG_CMD_READ 0x12 #define MALO_REG_DATA_WRITE_LEN 0x14 #define MALO_REG_DATA_WRITE 0x16 #define MALO_REG_CMD_WRITE_LEN 0x18 #define MALO_REG_CMD_WRITE 0x1a #define MALO_REG_CARD_STATUS 0x20 #define MALO_REG_HOST_INTR_CAUSE 0x22 #define MALO_REG_DATA_READ_LEN 0x24 #define MALO_REG_RBAL 0x28 #define MALO_REG_CMD_READ_LEN 0x30 #define MALO_REG_SCRATCH 0x3f #define MALO_REG_CARD_INTR_MASK 0x44 /* register values */ #define MALO_VAL_SCRATCH_READY 0x00 #define MALO_VAL_TX_DL_OVER 0x01 #define MALO_VAL_RX_DL_OVER 0x02 #define MALO_VAL_CMD_DL_OVER 0x04 #define MALO_VAL_SCRATCH_FW_LOADED 0x5a #define MALO_VAL_HOST_INTR_MASK_ON 0x001f #define MALO_VAL_CARD_STATUS_MASK 0x7f00 /* interrupt reasons */ #define MALO_VAL_HOST_INTR_TX (1 << 0) #define MALO_VAL_HOST_INTR_RX (1 << 1) #define MALO_VAL_HOST_INTR_CMD (1 << 3) #define MALO_VAL_HOST_INTR_EVENT (1 << 4) /* FW commands */ #define MALO_CMD_RESP 0x8000 #define MALO_CMD_HWSPEC 0x0003 #define MALO_CMD_RESET 0x0005 #define MALO_CMD_SCAN 0x0006 #define MALO_CMD_AUTH 0x0011 #define MALO_CMD_WEP 0x0013 #define MALO_CMD_SNMP 0x0016 #define MALO_CMD_RADIO 0x001c #define MALO_CMD_CHANNEL 0x001d #define MALO_CMD_TXPOWER 0x001e #define MALO_CMD_ANTENNA 0x0020 #define MALO_CMD_MACCTRL 0x0028 #define MALO_CMD_ASSOC 0x0050 #define MALO_CMD_80211D 0x005b #define MALO_CMD_BGSCAN_CONFIG 0x006b #define MALO_CMD_BGSCAN_QUERY 0x006c #define MALO_CMD_RATE 0x0076 /* FW command values */ #define MALO_CMD_RADIO_OFF 0x0000 #define MALO_CMD_RADIO_ON 0x0001 #define MALO_CMD_RADIO_LONG_P 0x0000 #define MALO_CMD_RADIO_SHORT_P 0x0002 #define MALO_CMD_RADIO_AUTO_P 0x0004 #define MALO_CMD_MACCTRL_RX_ON 0x0001 #define MALO_CMD_MACCTRL_TX_ON 0x0002 #define MALO_CMD_MACCTRL_PROMISC_ON 0x0080 /* events */ #define MALO_EVENT_DEAUTH 0x0008 #define MALO_EVENT_DISASSOC 0x0009