Return to if_maloreg.h CVS log

Up to [local] / sys / dev / pcmcia

Annotation of sys/dev/pcmcia/if_maloreg.h, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: if_maloreg.h,v 1.14 2007/08/09 14:50:06 mglocker Exp $ */
        !             2:
        !             3: /*
        !             4:  * Copyright (c) 2007 Marcus Glocker <mglocker@openbsd.org>
        !             5:  *
        !             6:  * Permission to use, copy, modify, and distribute this software for any
        !             7:  * purpose with or without fee is hereby granted, provided that the above
        !             8:  * copyright notice and this permission notice appear in all copies.
        !             9:  *
        !            10:  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
        !            11:  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
        !            12:  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
        !            13:  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
        !            14:  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
        !            15:  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
        !            16:  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
        !            17:  */
        !            18:
        !            19: /* registers */
        !            20: #define MALO_REG_HOST_STATUS           0x00
        !            21: #define MALO_REG_CARD_INTR_CAUSE       0x02
        !            22: #define MALO_REG_HOST_INTR_MASK                0x04
        !            23: #define MALO_REG_DATA_READ             0x10
        !            24: #define MALO_REG_CMD_READ              0x12
        !            25: #define MALO_REG_DATA_WRITE_LEN                0x14
        !            26: #define MALO_REG_DATA_WRITE            0x16
        !            27: #define MALO_REG_CMD_WRITE_LEN         0x18
        !            28: #define MALO_REG_CMD_WRITE             0x1a
        !            29: #define MALO_REG_CARD_STATUS           0x20
        !            30: #define MALO_REG_HOST_INTR_CAUSE       0x22
        !            31: #define MALO_REG_DATA_READ_LEN         0x24
        !            32: #define MALO_REG_RBAL                  0x28
        !            33: #define MALO_REG_CMD_READ_LEN          0x30
        !            34: #define MALO_REG_SCRATCH               0x3f
        !            35: #define MALO_REG_CARD_INTR_MASK                0x44
        !            36:
        !            37: /* register values */
        !            38: #define MALO_VAL_SCRATCH_READY         0x00
        !            39: #define MALO_VAL_TX_DL_OVER            0x01
        !            40: #define MALO_VAL_RX_DL_OVER            0x02
        !            41: #define MALO_VAL_CMD_DL_OVER           0x04
        !            42: #define MALO_VAL_SCRATCH_FW_LOADED     0x5a
        !            43: #define MALO_VAL_HOST_INTR_MASK_ON     0x001f
        !            44: #define MALO_VAL_CARD_STATUS_MASK      0x7f00
        !            45:
        !            46: /* interrupt reasons */
        !            47: #define MALO_VAL_HOST_INTR_TX          (1 << 0)
        !            48: #define MALO_VAL_HOST_INTR_RX          (1 << 1)
        !            49: #define MALO_VAL_HOST_INTR_CMD         (1 << 3)
        !            50: #define MALO_VAL_HOST_INTR_EVENT       (1 << 4)
        !            51:
        !            52: /* FW commands */
        !            53: #define MALO_CMD_RESP                  0x8000
        !            54: #define MALO_CMD_HWSPEC                        0x0003
        !            55: #define MALO_CMD_RESET                 0x0005
        !            56: #define MALO_CMD_SCAN                  0x0006
        !            57: #define MALO_CMD_AUTH                  0x0011
        !            58: #define MALO_CMD_WEP                   0x0013
        !            59: #define MALO_CMD_SNMP                  0x0016
        !            60: #define MALO_CMD_RADIO                 0x001c
        !            61: #define MALO_CMD_CHANNEL               0x001d
        !            62: #define MALO_CMD_TXPOWER               0x001e
        !            63: #define MALO_CMD_ANTENNA               0x0020
        !            64: #define MALO_CMD_MACCTRL               0x0028
        !            65: #define MALO_CMD_ASSOC                 0x0050
        !            66: #define MALO_CMD_80211D                        0x005b
        !            67: #define MALO_CMD_BGSCAN_CONFIG         0x006b
        !            68: #define MALO_CMD_BGSCAN_QUERY          0x006c
        !            69: #define MALO_CMD_RATE                  0x0076
        !            70:
        !            71: /* FW command values */
        !            72: #define MALO_CMD_RADIO_OFF             0x0000
        !            73: #define MALO_CMD_RADIO_ON              0x0001
        !            74: #define MALO_CMD_RADIO_LONG_P          0x0000
        !            75: #define MALO_CMD_RADIO_SHORT_P         0x0002
        !            76: #define MALO_CMD_RADIO_AUTO_P          0x0004
        !            77: #define MALO_CMD_MACCTRL_RX_ON         0x0001
        !            78: #define MALO_CMD_MACCTRL_TX_ON         0x0002
        !            79: #define MALO_CMD_MACCTRL_PROMISC_ON    0x0080
        !            80:
        !            81: /* events */
        !            82: #define MALO_EVENT_DEAUTH              0x0008
        !            83: #define MALO_EVENT_DISASSOC            0x0009