File: [local] / sys / dev / pci / pcscp.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:13:48 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: pcscp.c,v 1.14 2006/04/30 00:35:40 brad Exp $ */
/* $NetBSD: pcscp.c,v 1.26 2003/10/19 10:25:42 tsutsui Exp $ */
/*-
* Copyright (c) 1997, 1998, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center; Izumi Tsutsui.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* pcscp.c: device dependent code for AMD Am53c974 (PCscsi-PCI)
* written by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
*
* Technical manual available at
* http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/19113.pdf
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <scsi/scsi_all.h>
#include <scsi/scsiconf.h>
#include <scsi/scsi_message.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <dev/pci/pcscpreg.h>
#define IO_MAP_REG 0x10
struct pcscp_softc {
struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */
bus_space_tag_t sc_st; /* bus space tag */
bus_space_handle_t sc_sh; /* bus space handle */
void *sc_ih; /* interrupt cookie */
bus_dma_tag_t sc_dmat; /* DMA tag */
bus_dmamap_t sc_xfermap; /* DMA map for transfers */
u_int32_t *sc_mdladdr; /* MDL array */
bus_dmamap_t sc_mdldmap; /* MDL DMA map */
int sc_active; /* DMA state */
int sc_datain; /* DMA Data Direction */
size_t sc_dmasize; /* DMA size */
char **sc_dmaaddr; /* DMA address */
size_t *sc_dmalen; /* DMA length */
};
#define READ_DMAREG(sc, reg) \
bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))
#define WRITE_DMAREG(sc, reg, var) \
bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (var))
#define PCSCP_READ_REG(sc, reg) \
bus_space_read_1((sc)->sc_st, (sc)->sc_sh, (reg) << 2)
#define PCSCP_WRITE_REG(sc, reg, val) \
bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg) << 2, (val))
int pcscp_match(struct device *, void *, void *);
void pcscp_attach(struct device *, struct device *, void *);
struct cfattach pcscp_ca = {
sizeof(struct pcscp_softc), pcscp_match, pcscp_attach
};
struct cfdriver pcscp_cd = {
NULL, "pcscp", DV_DULL
};
/*
* Functions and the switch for the MI code.
*/
u_char pcscp_read_reg(struct ncr53c9x_softc *, int);
void pcscp_write_reg(struct ncr53c9x_softc *, int, u_char);
int pcscp_dma_isintr(struct ncr53c9x_softc *);
void pcscp_dma_reset(struct ncr53c9x_softc *);
int pcscp_dma_intr(struct ncr53c9x_softc *);
int pcscp_dma_setup(struct ncr53c9x_softc *, caddr_t *,
size_t *, int, size_t *);
void pcscp_dma_go(struct ncr53c9x_softc *);
void pcscp_dma_stop(struct ncr53c9x_softc *);
int pcscp_dma_isactive(struct ncr53c9x_softc *);
struct scsi_adapter pcscp_adapter = {
ncr53c9x_scsi_cmd, /* cmd */
minphys, /* minphys */
0, /* open */
0, /* close */
};
struct ncr53c9x_glue pcscp_glue = {
pcscp_read_reg,
pcscp_write_reg,
pcscp_dma_isintr,
pcscp_dma_reset,
pcscp_dma_intr,
pcscp_dma_setup,
pcscp_dma_go,
pcscp_dma_stop,
pcscp_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
int
pcscp_match(struct device *parent, void *match, void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_AMD)
return 0;
switch (PCI_PRODUCT(pa->pa_id)) {
case PCI_PRODUCT_AMD_PCSCSI_PCI:
return 1;
}
return 0;
}
/*
* Attach this instance, and then all the sub-devices
*/
void
pcscp_attach(struct device *parent, struct device *self, void *aux)
{
struct pci_attach_args *pa = aux;
struct pcscp_softc *esc = (void *)self;
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
bus_space_tag_t iot;
bus_space_handle_t ioh;
pci_intr_handle_t ih;
const char *intrstr;
bus_dma_segment_t seg;
int error, rseg;
if (pci_mapreg_map(pa, IO_MAP_REG, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL, NULL)) {
printf("%s: unable to map registers\n", sc->sc_dev.dv_xname);
return;
}
sc->sc_glue = &pcscp_glue;
esc->sc_st = iot;
esc->sc_sh = ioh;
esc->sc_dmat = pa->pa_dmat;
/*
* XXX More of this should be in ncr53c9x_attach(), but
* XXX should we really poke around the chip that much in
* XXX the MI code? Think about this more...
*/
/*
* Set up static configuration info.
*/
/*
* XXX should read configuration from EEPROM?
*
* MI ncr53c9x driver does not support configuration
* per each target device, though...
*/
sc->sc_id = 7;
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE;
sc->sc_cfg3 = NCRAMDCFG3_IDM | NCRAMDCFG3_FCLK;
sc->sc_cfg4 = NCRAMDCFG4_GE12NS | NCRAMDCFG4_RADE;
sc->sc_rev = NCR_VARIANT_AM53C974;
sc->sc_features = NCR_F_FASTSCSI;
sc->sc_cfg3_fscsi = NCRAMDCFG3_FSCSI;
sc->sc_freq = 40; /* MHz */
/*
* XXX minsync and maxxfer _should_ be set up in MI code,
* XXX but it appears to have some dependency on what sort
* XXX of DMA we're hooked up to, etc.
*/
/*
* This is the value used to start sync negotiations
* Note that the NCR register "SYNCTP" is programmed
* in "clocks per byte", and has a minimum value of 4.
* The SCSI period used in negotiation is one-fourth
* of the time (in nanoseconds) needed to transfer one byte.
* Since the chip's clock is given in MHz, we have the following
* formula: 4 * period = (1000 / freq) * 4
*/
sc->sc_minsync = 1000 / sc->sc_freq;
/* Really no limit, but since we want to fit into the TCR... */
sc->sc_maxxfer = 16 * 1024 * 1024;
/*
* Create the DMA maps for the data transfers.
*/
#define MDL_SEG_SIZE 0x1000 /* 4kbyte per segment */
#define MDL_SEG_OFFSET 0x0FFF
#define MDL_SIZE (MAXPHYS / MDL_SEG_SIZE + 1) /* no hardware limit? */
if (bus_dmamap_create(esc->sc_dmat, MAXPHYS, MDL_SIZE, MDL_SEG_SIZE,
MDL_SEG_SIZE, BUS_DMA_NOWAIT, &esc->sc_xfermap)) {
printf("%s: can't create dma maps\n", sc->sc_dev.dv_xname);
return;
}
/*
* Allocate and map memory for the MDL.
*/
if ((error = bus_dmamem_alloc(esc->sc_dmat,
sizeof(u_int32_t) * MDL_SIZE, PAGE_SIZE, 0, &seg, 1, &rseg,
BUS_DMA_NOWAIT)) != 0) {
printf("%s: unable to allocate memory for the MDL, "
"error = %d\n", sc->sc_dev.dv_xname, error);
goto fail_0;
}
if ((error = bus_dmamem_map(esc->sc_dmat, &seg, rseg,
sizeof(u_int32_t) * MDL_SIZE , (caddr_t *)&esc->sc_mdladdr,
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
printf("%s: unable to map the MDL memory, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail_1;
}
if ((error = bus_dmamap_create(esc->sc_dmat,
sizeof(u_int32_t) * MDL_SIZE, 1, sizeof(u_int32_t) * MDL_SIZE,
0, BUS_DMA_NOWAIT, &esc->sc_mdldmap)) != 0) {
printf("%s: unable to map_create for the MDL, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail_2;
}
if ((error = bus_dmamap_load(esc->sc_dmat, esc->sc_mdldmap,
esc->sc_mdladdr, sizeof(u_int32_t) * MDL_SIZE,
NULL, BUS_DMA_NOWAIT)) != 0) {
printf("%s: unable to load for the MDL, error = %d\n",
sc->sc_dev.dv_xname, error);
goto fail_3;
}
/* map and establish interrupt */
if (pci_intr_map(pa, &ih)) {
printf(": couldn't map interrupt\n");
goto fail_4;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
esc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO,
ncr53c9x_intr, esc, sc->sc_dev.dv_xname);
if (esc->sc_ih == NULL) {
printf(": couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
goto fail_4;
}
if (intrstr != NULL)
printf(": %s\n", intrstr);
/* Do the common parts of attachment. */
printf("%s", sc->sc_dev.dv_xname);
ncr53c9x_attach(sc, &pcscp_adapter, NULL);
/* Turn on target selection using the `dma' method */
sc->sc_features |= NCR_F_DMASELECT;
return;
fail_4:
bus_dmamap_unload(esc->sc_dmat, esc->sc_mdldmap);
fail_3:
bus_dmamap_destroy(esc->sc_dmat, esc->sc_mdldmap);
fail_2:
bus_dmamem_unmap(esc->sc_dmat, (caddr_t)esc->sc_mdldmap,
sizeof(uint32_t) * MDL_SIZE);
fail_1:
bus_dmamem_free(esc->sc_dmat, &seg, rseg);
fail_0:
bus_dmamap_destroy(esc->sc_dmat, esc->sc_xfermap);
}
/*
* Glue functions.
*/
u_char
pcscp_read_reg(struct ncr53c9x_softc *sc, int reg)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
return PCSCP_READ_REG(esc, reg);
}
void
pcscp_write_reg(struct ncr53c9x_softc *sc, int reg, u_char v)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
PCSCP_WRITE_REG(esc, reg, v);
}
int
pcscp_dma_isintr(struct ncr53c9x_softc *sc)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
return (PCSCP_READ_REG(esc, NCR_STAT) & NCRSTAT_INT) != 0;
}
void
pcscp_dma_reset(struct ncr53c9x_softc *sc)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE);
esc->sc_active = 0;
}
int
pcscp_dma_intr(struct ncr53c9x_softc *sc)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
int trans, resid, i;
bus_dmamap_t dmap = esc->sc_xfermap;
int datain = esc->sc_datain;
u_int32_t dmastat;
char *p = NULL;
dmastat = READ_DMAREG(esc, DMA_STAT);
if (dmastat & DMASTAT_ERR) {
/* XXX not tested... */
WRITE_DMAREG(esc, DMA_CMD,
DMACMD_ABORT | (datain ? DMACMD_DIR : 0));
printf("%s: error: DMA error detected; Aborting.\n",
sc->sc_dev.dv_xname);
bus_dmamap_unload(esc->sc_dmat, dmap);
return -1;
}
if (dmastat & DMASTAT_ABT) {
/* XXX What should be done? */
printf("%s: dma_intr: DMA aborted.\n", sc->sc_dev.dv_xname);
WRITE_DMAREG(esc, DMA_CMD,
DMACMD_IDLE | (datain ? DMACMD_DIR : 0));
esc->sc_active = 0;
return 0;
}
#ifdef DIAGNOSTIC
/* This is an "assertion" :) */
if (esc->sc_active == 0)
panic("pcscp dmaintr: DMA wasn't active");
#endif
/* DMA has stopped */
esc->sc_active = 0;
if (esc->sc_dmasize == 0) {
/* A "Transfer Pad" operation completed */
NCR_DMA(("dmaintr: discarded %d bytes (tcl=%d, tcm=%d)\n",
PCSCP_READ_REG(esc, NCR_TCL) |
(PCSCP_READ_REG(esc, NCR_TCM) << 8),
PCSCP_READ_REG(esc, NCR_TCL),
PCSCP_READ_REG(esc, NCR_TCM)));
return 0;
}
resid = 0;
/*
* If a transfer onto the SCSI bus gets interrupted by the device
* (e.g. for a SAVEPOINTER message), the data in the FIFO counts
* as residual since the ESP counter registers get decremented as
* bytes are clocked into the FIFO.
*/
if (!datain &&
(resid = (PCSCP_READ_REG(esc, NCR_FFLAG) & NCRFIFO_FF)) != 0) {
NCR_DMA(("pcscp_dma_intr: empty esp FIFO of %d ", resid));
}
if ((sc->sc_espstat & NCRSTAT_TC) == 0) {
/*
* `Terminal count' is off, so read the residue
* out of the ESP counter registers.
*/
if (datain) {
resid = PCSCP_READ_REG(esc, NCR_FFLAG) & NCRFIFO_FF;
while (resid > 1)
resid =
PCSCP_READ_REG(esc, NCR_FFLAG) & NCRFIFO_FF;
WRITE_DMAREG(esc, DMA_CMD, DMACMD_BLAST | DMACMD_MDL |
(datain ? DMACMD_DIR : 0));
for (i = 0; i < 0x8000; i++) /* XXX 0x8000 ? */
if (READ_DMAREG(esc, DMA_STAT) & DMASTAT_BCMP)
break;
/* See the below comments... */
if (resid)
p = *esc->sc_dmaaddr;
}
resid += PCSCP_READ_REG(esc, NCR_TCL) |
(PCSCP_READ_REG(esc, NCR_TCM) << 8) |
(PCSCP_READ_REG(esc, NCR_TCH) << 16);
} else {
while ((dmastat & DMASTAT_DONE) == 0)
dmastat = READ_DMAREG(esc, DMA_STAT);
}
WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain ? DMACMD_DIR : 0));
/* sync MDL */
bus_dmamap_sync(esc->sc_dmat, esc->sc_mdldmap,
0, sizeof(u_int32_t) * dmap->dm_nsegs, BUS_DMASYNC_POSTWRITE);
/* sync transfer buffer */
bus_dmamap_sync(esc->sc_dmat, dmap, 0, dmap->dm_mapsize,
datain ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(esc->sc_dmat, dmap);
trans = esc->sc_dmasize - resid;
/*
* From the technical manual notes:
*
* `In some odd byte conditions, one residual byte will be left
* in the SCSI FIFO, and the FIFO flags will never count to 0.
* When this happens, the residual byte should be retrieved
* via PIO following completion of the BLAST operation.'
*/
if (p) {
p += trans;
*p = PCSCP_READ_REG(esc, NCR_FIFO);
trans++;
}
if (trans < 0) { /* transferred < 0 ? */
#if 0
/*
* This situation can happen in perfectly normal operation
* if the ESP is reselected while using DMA to select
* another target. As such, don't print the warning.
*/
printf("%s: xfer (%d) > req (%d)\n",
sc->sc_dev.dv_xname, trans, esc->sc_dmasize);
#endif
trans = esc->sc_dmasize;
}
NCR_DMA(("dmaintr: tcl=%d, tcm=%d, tch=%d; trans=%d, resid=%d\n",
PCSCP_READ_REG(esc, NCR_TCL),
PCSCP_READ_REG(esc, NCR_TCM),
PCSCP_READ_REG(esc, NCR_TCH),
trans, resid));
*esc->sc_dmalen -= trans;
*esc->sc_dmaaddr += trans;
return 0;
}
int
pcscp_dma_setup(struct ncr53c9x_softc *sc, caddr_t *addr, size_t *len,
int datain, size_t *dmasize)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
bus_dmamap_t dmap = esc->sc_xfermap;
u_int32_t *mdl;
int error, nseg, seg;
bus_addr_t s_offset, s_addr;
WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | (datain ? DMACMD_DIR : 0));
esc->sc_dmaaddr = addr;
esc->sc_dmalen = len;
esc->sc_dmasize = *dmasize;
esc->sc_datain = datain;
#ifdef DIAGNOSTIC
if ((*dmasize / MDL_SEG_SIZE) > MDL_SIZE)
panic("pcscp: transfer size too large");
#endif
/*
* No need to set up DMA in `Transfer Pad' operation.
* (case of *dmasize == 0)
*/
if (*dmasize == 0)
return 0;
error = bus_dmamap_load(esc->sc_dmat, dmap, *esc->sc_dmaaddr,
*esc->sc_dmalen, NULL,
((sc->sc_nexus->xs->flags & SCSI_NOSLEEP) ?
BUS_DMA_NOWAIT : BUS_DMA_WAITOK) | BUS_DMA_STREAMING |
((sc->sc_nexus->xs->flags & SCSI_DATA_IN) ?
BUS_DMA_READ : BUS_DMA_WRITE));
if (error) {
printf("%s: unable to load dmamap, error = %d\n",
sc->sc_dev.dv_xname, error);
return error;
}
/* set transfer length */
WRITE_DMAREG(esc, DMA_STC, *dmasize);
/* set up MDL */
mdl = esc->sc_mdladdr;
nseg = dmap->dm_nsegs;
/* the first segment is possibly not aligned with 4k MDL boundary */
s_addr = dmap->dm_segs[0].ds_addr;
s_offset = s_addr & MDL_SEG_OFFSET;
s_addr -= s_offset;
/* set the first MDL and offset */
WRITE_DMAREG(esc, DMA_SPA, s_offset);
*mdl++ = htole32(s_addr);
/* the rest dmamap segments are aligned with 4k boundary */
for (seg = 1; seg < nseg; seg++)
*mdl++ = htole32(dmap->dm_segs[seg].ds_addr);
return 0;
}
void
pcscp_dma_go(struct ncr53c9x_softc *sc)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
bus_dmamap_t dmap = esc->sc_xfermap, mdldmap = esc->sc_mdldmap;
int datain = esc->sc_datain;
/* No DMA transfer in Transfer Pad operation */
if (esc->sc_dmasize == 0)
return;
/* sync transfer buffer */
bus_dmamap_sync(esc->sc_dmat, dmap, 0, dmap->dm_mapsize,
datain ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
/* sync MDL */
bus_dmamap_sync(esc->sc_dmat, mdldmap,
0, sizeof(u_int32_t) * dmap->dm_nsegs, BUS_DMASYNC_PREWRITE);
/* set Starting MDL Address */
WRITE_DMAREG(esc, DMA_SMDLA, mdldmap->dm_segs[0].ds_addr);
/* set DMA command register bits */
/* XXX DMA Transfer Interrupt Enable bit is broken? */
WRITE_DMAREG(esc, DMA_CMD, DMACMD_IDLE | DMACMD_MDL |
/* DMACMD_INTE | */
(datain ? DMACMD_DIR : 0));
/* issue DMA start command */
WRITE_DMAREG(esc, DMA_CMD, DMACMD_START | DMACMD_MDL |
/* DMACMD_INTE | */
(datain ? DMACMD_DIR : 0));
esc->sc_active = 1;
}
void
pcscp_dma_stop(struct ncr53c9x_softc *sc)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
/* dma stop */
/* XXX What should we do here ? */
WRITE_DMAREG(esc, DMA_CMD,
DMACMD_ABORT | (esc->sc_datain ? DMACMD_DIR : 0));
bus_dmamap_unload(esc->sc_dmat, esc->sc_xfermap);
esc->sc_active = 0;
}
int
pcscp_dma_isactive(struct ncr53c9x_softc *sc)
{
struct pcscp_softc *esc = (struct pcscp_softc *)sc;
/* XXX should check esc->sc_active? */
if ((READ_DMAREG(esc, DMA_CMD) & DMACMD_CMD) != DMACMD_IDLE)
return 1;
return 0;
}