File: [local] / sys / dev / pci / if_vge.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:13:31 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: if_vge.c,v 1.33 2007/05/01 11:28:06 canacar Exp $ */
/* $FreeBSD: if_vge.c,v 1.3 2004/09/11 22:13:25 wpaul Exp $ */
/*
* Copyright (c) 2004
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* VIA Networking Technologies VT612x PCI gigabit ethernet NIC driver.
*
* Written by Bill Paul <wpaul@windriver.com>
* Senior Networking Software Engineer
* Wind River Systems
*
* Ported to OpenBSD by Peter Valchev <pvalchev@openbsd.org>
*/
/*
* The VIA Networking VT6122 is a 32bit, 33/66MHz PCI device that
* combines a tri-speed ethernet MAC and PHY, with the following
* features:
*
* o Jumbo frame support up to 16K
* o Transmit and receive flow control
* o IPv4 checksum offload
* o VLAN tag insertion and stripping
* o TCP large send
* o 64-bit multicast hash table filter
* o 64 entry CAM filter
* o 16K RX FIFO and 48K TX FIFO memory
* o Interrupt moderation
*
* The VT6122 supports up to four transmit DMA queues. The descriptors
* in the transmit ring can address up to 7 data fragments; frames which
* span more than 7 data buffers must be coalesced, but in general the
* BSD TCP/IP stack rarely generates frames more than 2 or 3 fragments
* long. The receive descriptors address only a single buffer.
*
* There are two peculiar design issues with the VT6122. One is that
* receive data buffers must be aligned on a 32-bit boundary. This is
* not a problem where the VT6122 is used as a LOM device in x86-based
* systems, but on architectures that generate unaligned access traps, we
* have to do some copying.
*
* The other issue has to do with the way 64-bit addresses are handled.
* The DMA descriptors only allow you to specify 48 bits of addressing
* information. The remaining 16 bits are specified using one of the
* I/O registers. If you only have a 32-bit system, then this isn't
* an issue, but if you have a 64-bit system and more than 4GB of
* memory, you must have to make sure your network data buffers reside
* in the same 48-bit 'segment.'
*
* Special thanks to Ryan Fu at VIA Networking for providing documentation
* and sample NICs for testing.
*/
#include "bpfilter.h"
#include "vlan.h"
#include <sys/param.h>
#include <sys/endian.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/timeout.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#endif
#if NVLAN > 0
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#endif
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/if_vgereg.h>
#include <dev/pci/if_vgevar.h>
int vge_probe (struct device *, void *, void *);
void vge_attach (struct device *, struct device *, void *);
int vge_encap (struct vge_softc *, struct mbuf *, int);
int vge_allocmem (struct vge_softc *);
int vge_newbuf (struct vge_softc *, int, struct mbuf *);
int vge_rx_list_init (struct vge_softc *);
int vge_tx_list_init (struct vge_softc *);
void vge_rxeof (struct vge_softc *);
void vge_txeof (struct vge_softc *);
int vge_intr (void *);
void vge_tick (void *);
void vge_start (struct ifnet *);
int vge_ioctl (struct ifnet *, u_long, caddr_t);
int vge_init (struct ifnet *);
void vge_stop (struct vge_softc *);
void vge_watchdog (struct ifnet *);
int vge_ifmedia_upd (struct ifnet *);
void vge_ifmedia_sts (struct ifnet *, struct ifmediareq *);
#ifdef VGE_EEPROM
void vge_eeprom_getword (struct vge_softc *, int, u_int16_t *);
#endif
void vge_read_eeprom (struct vge_softc *, caddr_t, int, int, int);
void vge_miipoll_start (struct vge_softc *);
void vge_miipoll_stop (struct vge_softc *);
int vge_miibus_readreg (struct device *, int, int);
void vge_miibus_writereg (struct device *, int, int, int);
void vge_miibus_statchg (struct device *);
void vge_cam_clear (struct vge_softc *);
int vge_cam_set (struct vge_softc *, uint8_t *);
void vge_setmulti (struct vge_softc *);
void vge_reset (struct vge_softc *);
struct cfattach vge_ca = {
sizeof(struct vge_softc), vge_probe, vge_attach
};
struct cfdriver vge_cd = {
0, "vge", DV_IFNET
};
#define VGE_PCI_LOIO 0x10
#define VGE_PCI_LOMEM 0x14
int vge_debug = 0;
#define DPRINTF(x) if (vge_debug) printf x
#define DPRINTFN(n, x) if (vge_debug >= (n)) printf x
const struct pci_matchid vge_devices[] = {
{ PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT612x },
};
#ifdef VGE_EEPROM
/*
* Read a word of data stored in the EEPROM at address 'addr.'
*/
void
vge_eeprom_getword(struct vge_softc *sc, int addr, u_int16_t *dest)
{
int i;
u_int16_t word = 0;
/*
* Enter EEPROM embedded programming mode. In order to
* access the EEPROM at all, we first have to set the
* EELOAD bit in the CHIPCFG2 register.
*/
CSR_SETBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD);
CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/);
/* Select the address of the word we want to read */
CSR_WRITE_1(sc, VGE_EEADDR, addr);
/* Issue read command */
CSR_SETBIT_1(sc, VGE_EECMD, VGE_EECMD_ERD);
/* Wait for the done bit to be set. */
for (i = 0; i < VGE_TIMEOUT; i++) {
if (CSR_READ_1(sc, VGE_EECMD) & VGE_EECMD_EDONE)
break;
}
if (i == VGE_TIMEOUT) {
printf("%s: EEPROM read timed out\n", sc->vge_dev.dv_xname);
*dest = 0;
return;
}
/* Read the result */
word = CSR_READ_2(sc, VGE_EERDDAT);
/* Turn off EEPROM access mode. */
CSR_CLRBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/);
CSR_CLRBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD);
*dest = word;
}
#endif
/*
* Read a sequence of words from the EEPROM.
*/
void
vge_read_eeprom(struct vge_softc *sc, caddr_t dest, int off, int cnt,
int swap)
{
int i;
#ifdef VGE_EEPROM
u_int16_t word = 0, *ptr;
for (i = 0; i < cnt; i++) {
vge_eeprom_getword(sc, off + i, &word);
ptr = (u_int16_t *)(dest + (i * 2));
if (swap)
*ptr = ntohs(word);
else
*ptr = word;
}
#else
for (i = 0; i < ETHER_ADDR_LEN; i++)
dest[i] = CSR_READ_1(sc, VGE_PAR0 + i);
#endif
}
void
vge_miipoll_stop(struct vge_softc *sc)
{
int i;
CSR_WRITE_1(sc, VGE_MIICMD, 0);
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(1);
if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL)
break;
}
if (i == VGE_TIMEOUT)
printf("%s: failed to idle MII autopoll\n", sc->vge_dev.dv_xname);
}
void
vge_miipoll_start(struct vge_softc *sc)
{
int i;
/* First, make sure we're idle. */
CSR_WRITE_1(sc, VGE_MIICMD, 0);
CSR_WRITE_1(sc, VGE_MIIADDR, VGE_MIIADDR_SWMPL);
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(1);
if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL)
break;
}
if (i == VGE_TIMEOUT) {
printf("%s: failed to idle MII autopoll\n", sc->vge_dev.dv_xname);
return;
}
/* Now enable auto poll mode. */
CSR_WRITE_1(sc, VGE_MIICMD, VGE_MIICMD_MAUTO);
/* And make sure it started. */
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(1);
if ((CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL) == 0)
break;
}
if (i == VGE_TIMEOUT)
printf("%s: failed to start MII autopoll\n", sc->vge_dev.dv_xname);
}
int
vge_miibus_readreg(struct device *dev, int phy, int reg)
{
struct vge_softc *sc = (struct vge_softc *)dev;
int i, s;
u_int16_t rval = 0;
if (phy != (CSR_READ_1(sc, VGE_MIICFG) & 0x1F))
return(0);
s = splnet();
vge_miipoll_stop(sc);
/* Specify the register we want to read. */
CSR_WRITE_1(sc, VGE_MIIADDR, reg);
/* Issue read command. */
CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_RCMD);
/* Wait for the read command bit to self-clear. */
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(1);
if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_RCMD) == 0)
break;
}
if (i == VGE_TIMEOUT)
printf("%s: MII read timed out\n", sc->vge_dev.dv_xname);
else
rval = CSR_READ_2(sc, VGE_MIIDATA);
vge_miipoll_start(sc);
splx(s);
return (rval);
}
void
vge_miibus_writereg(struct device *dev, int phy, int reg, int data)
{
struct vge_softc *sc = (struct vge_softc *)dev;
int i, s;
if (phy != (CSR_READ_1(sc, VGE_MIICFG) & 0x1F))
return;
s = splnet();
vge_miipoll_stop(sc);
/* Specify the register we want to write. */
CSR_WRITE_1(sc, VGE_MIIADDR, reg);
/* Specify the data we want to write. */
CSR_WRITE_2(sc, VGE_MIIDATA, data);
/* Issue write command. */
CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_WCMD);
/* Wait for the write command bit to self-clear. */
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(1);
if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_WCMD) == 0)
break;
}
if (i == VGE_TIMEOUT) {
printf("%s: MII write timed out\n", sc->vge_dev.dv_xname);
}
vge_miipoll_start(sc);
splx(s);
}
void
vge_cam_clear(struct vge_softc *sc)
{
int i;
/*
* Turn off all the mask bits. This tells the chip
* that none of the entries in the CAM filter are valid.
* desired entries will be enabled as we fill the filter in.
*/
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK);
CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE);
for (i = 0; i < 8; i++)
CSR_WRITE_1(sc, VGE_CAM0 + i, 0);
/* Clear the VLAN filter too. */
CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|VGE_CAMADDR_AVSEL|0);
for (i = 0; i < 8; i++)
CSR_WRITE_1(sc, VGE_CAM0 + i, 0);
CSR_WRITE_1(sc, VGE_CAMADDR, 0);
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
sc->vge_camidx = 0;
}
int
vge_cam_set(struct vge_softc *sc, uint8_t *addr)
{
int i, error = 0;
if (sc->vge_camidx == VGE_CAM_MAXADDRS)
return(ENOSPC);
/* Select the CAM data page. */
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMDATA);
/* Set the filter entry we want to update and enable writing. */
CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|sc->vge_camidx);
/* Write the address to the CAM registers */
for (i = 0; i < ETHER_ADDR_LEN; i++)
CSR_WRITE_1(sc, VGE_CAM0 + i, addr[i]);
/* Issue a write command. */
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_WRITE);
/* Wake for it to clear. */
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(1);
if ((CSR_READ_1(sc, VGE_CAMCTL) & VGE_CAMCTL_WRITE) == 0)
break;
}
if (i == VGE_TIMEOUT) {
printf("%s: setting CAM filter failed\n", sc->vge_dev.dv_xname);
error = EIO;
goto fail;
}
/* Select the CAM mask page. */
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK);
/* Set the mask bit that enables this filter. */
CSR_SETBIT_1(sc, VGE_CAM0 + (sc->vge_camidx/8),
1<<(sc->vge_camidx & 7));
sc->vge_camidx++;
fail:
/* Turn off access to CAM. */
CSR_WRITE_1(sc, VGE_CAMADDR, 0);
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
return (error);
}
/*
* Program the multicast filter. We use the 64-entry CAM filter
* for perfect filtering. If there's more than 64 multicast addresses,
* we use the hash filter instead.
*/
void
vge_setmulti(struct vge_softc *sc)
{
struct arpcom *ac = &sc->arpcom;
struct ifnet *ifp = &ac->ac_if;
struct ether_multi *enm;
struct ether_multistep step;
int error;
u_int32_t h = 0, hashes[2] = { 0, 0 };
/* First, zot all the multicast entries. */
vge_cam_clear(sc);
CSR_WRITE_4(sc, VGE_MAR0, 0);
CSR_WRITE_4(sc, VGE_MAR1, 0);
ifp->if_flags &= ~IFF_ALLMULTI;
/*
* If the user wants allmulti or promisc mode, enable reception
* of all multicast frames.
*/
if (ifp->if_flags & IFF_PROMISC) {
allmulti:
CSR_WRITE_4(sc, VGE_MAR0, 0xFFFFFFFF);
CSR_WRITE_4(sc, VGE_MAR1, 0xFFFFFFFF);
ifp->if_flags |= IFF_ALLMULTI;
return;
}
/* Now program new ones */
ETHER_FIRST_MULTI(step, ac, enm);
while (enm != NULL) {
if (bcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN))
goto allmulti;
error = vge_cam_set(sc, enm->enm_addrlo);
if (error)
break;
ETHER_NEXT_MULTI(step, enm);
}
/* If there were too many addresses, use the hash filter. */
if (error) {
vge_cam_clear(sc);
ETHER_FIRST_MULTI(step, ac, enm);
while (enm != NULL) {
h = ether_crc32_be(enm->enm_addrlo,
ETHER_ADDR_LEN) >> 26;
hashes[h >> 5] |= 1 << (h & 0x1f);
ETHER_NEXT_MULTI(step, enm);
}
CSR_WRITE_4(sc, VGE_MAR0, hashes[0]);
CSR_WRITE_4(sc, VGE_MAR1, hashes[1]);
}
}
void
vge_reset(struct vge_softc *sc)
{
int i;
CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_SOFTRESET);
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(5);
if ((CSR_READ_1(sc, VGE_CRS1) & VGE_CR1_SOFTRESET) == 0)
break;
}
if (i == VGE_TIMEOUT) {
printf("%s: soft reset timed out", sc->vge_dev.dv_xname);
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_STOP_FORCE);
DELAY(2000);
}
DELAY(5000);
CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_RELOAD);
for (i = 0; i < VGE_TIMEOUT; i++) {
DELAY(5);
if ((CSR_READ_1(sc, VGE_EECSR) & VGE_EECSR_RELOAD) == 0)
break;
}
if (i == VGE_TIMEOUT) {
printf("%s: EEPROM reload timed out\n", sc->vge_dev.dv_xname);
return;
}
CSR_CLRBIT_1(sc, VGE_CHIPCFG0, VGE_CHIPCFG0_PACPI);
}
/*
* Probe for a VIA gigabit chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
*/
int
vge_probe(struct device *dev, void *match, void *aux)
{
return (pci_matchbyid((struct pci_attach_args *)aux, vge_devices,
sizeof(vge_devices)/sizeof(vge_devices[0])));
}
/*
* Allocate memory for RX/TX rings
*/
int
vge_allocmem(struct vge_softc *sc)
{
int nseg, rseg;
int i, error;
nseg = 32;
/* Allocate DMA'able memory for the TX ring */
error = bus_dmamap_create(sc->sc_dmat, VGE_TX_LIST_SZ, 1,
VGE_TX_LIST_SZ, 0, BUS_DMA_ALLOCNOW,
&sc->vge_ldata.vge_tx_list_map);
if (error)
return (ENOMEM);
error = bus_dmamem_alloc(sc->sc_dmat, VGE_TX_LIST_SZ,
ETHER_ALIGN, 0,
&sc->vge_ldata.vge_tx_listseg, 1, &rseg, BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't alloc TX list\n", sc->vge_dev.dv_xname);
return (ENOMEM);
}
/* Load the map for the TX ring. */
error = bus_dmamem_map(sc->sc_dmat, &sc->vge_ldata.vge_tx_listseg,
1, VGE_TX_LIST_SZ,
(caddr_t *)&sc->vge_ldata.vge_tx_list, BUS_DMA_NOWAIT);
memset(sc->vge_ldata.vge_tx_list, 0, VGE_TX_LIST_SZ);
if (error) {
printf("%s: can't map TX dma buffers\n",
sc->vge_dev.dv_xname);
bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_tx_listseg, rseg);
return (ENOMEM);
}
error = bus_dmamap_load(sc->sc_dmat, sc->vge_ldata.vge_tx_list_map,
sc->vge_ldata.vge_tx_list, VGE_TX_LIST_SZ, NULL, BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't load TX dma map\n", sc->vge_dev.dv_xname);
bus_dmamap_destroy(sc->sc_dmat, sc->vge_ldata.vge_tx_list_map);
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->vge_ldata.vge_tx_list,
VGE_TX_LIST_SZ);
bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_tx_listseg, rseg);
return (ENOMEM);
}
/* Create DMA maps for TX buffers */
for (i = 0; i < VGE_TX_DESC_CNT; i++) {
error = bus_dmamap_create(sc->sc_dmat, MCLBYTES * nseg, nseg,
MCLBYTES, 0, BUS_DMA_ALLOCNOW,
&sc->vge_ldata.vge_tx_dmamap[i]);
if (error) {
printf("%s: can't create DMA map for TX\n",
sc->vge_dev.dv_xname);
return (ENOMEM);
}
}
/* Allocate DMA'able memory for the RX ring */
error = bus_dmamap_create(sc->sc_dmat, VGE_RX_LIST_SZ, 1,
VGE_RX_LIST_SZ, 0, BUS_DMA_ALLOCNOW,
&sc->vge_ldata.vge_rx_list_map);
if (error)
return (ENOMEM);
error = bus_dmamem_alloc(sc->sc_dmat, VGE_RX_LIST_SZ, VGE_RING_ALIGN,
0, &sc->vge_ldata.vge_rx_listseg, 1, &rseg, BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't alloc RX list\n", sc->vge_dev.dv_xname);
return (ENOMEM);
}
/* Load the map for the RX ring. */
error = bus_dmamem_map(sc->sc_dmat, &sc->vge_ldata.vge_rx_listseg,
1, VGE_RX_LIST_SZ,
(caddr_t *)&sc->vge_ldata.vge_rx_list, BUS_DMA_NOWAIT);
memset(sc->vge_ldata.vge_rx_list, 0, VGE_RX_LIST_SZ);
if (error) {
printf("%s: can't map RX dma buffers\n",
sc->vge_dev.dv_xname);
bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_rx_listseg, rseg);
return (ENOMEM);
}
error = bus_dmamap_load(sc->sc_dmat, sc->vge_ldata.vge_rx_list_map,
sc->vge_ldata.vge_rx_list, VGE_RX_LIST_SZ, NULL, BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't load RX dma map\n", sc->vge_dev.dv_xname);
bus_dmamap_destroy(sc->sc_dmat, sc->vge_ldata.vge_rx_list_map);
bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->vge_ldata.vge_rx_list,
VGE_RX_LIST_SZ);
bus_dmamem_free(sc->sc_dmat, &sc->vge_ldata.vge_rx_listseg, rseg);
return (ENOMEM);
}
/* Create DMA maps for RX buffers */
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
error = bus_dmamap_create(sc->sc_dmat, MCLBYTES * nseg, nseg,
MCLBYTES, 0, BUS_DMA_ALLOCNOW,
&sc->vge_ldata.vge_rx_dmamap[i]);
if (error) {
printf("%s: can't create DMA map for RX\n",
sc->vge_dev.dv_xname);
return (ENOMEM);
}
}
return (0);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
void
vge_attach(struct device *parent, struct device *self, void *aux)
{
u_char eaddr[ETHER_ADDR_LEN];
u_int16_t as[3];
struct vge_softc *sc = (struct vge_softc *)self;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
const char *intrstr = NULL;
struct ifnet *ifp;
int error = 0, i;
bus_size_t iosize;
/*
* Map control/status registers.
*/
if (pci_mapreg_map(pa, VGE_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
&sc->vge_btag, &sc->vge_bhandle, NULL, &iosize, 0)) {
if (pci_mapreg_map(pa, VGE_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
&sc->vge_btag, &sc->vge_bhandle, NULL, &iosize, 0)) {
printf(": can't map mem or i/o space\n");
return;
}
}
/* Allocate interrupt */
if (pci_intr_map(pa, &ih)) {
printf(": couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih);
sc->vge_intrhand = pci_intr_establish(pc, ih, IPL_NET, vge_intr, sc,
sc->vge_dev.dv_xname);
if (sc->vge_intrhand == NULL) {
printf(": couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
return;
}
printf(": %s", intrstr);
sc->sc_dmat = pa->pa_dmat;
/* Reset the adapter. */
vge_reset(sc);
/*
* Get station address from the EEPROM.
*/
vge_read_eeprom(sc, (caddr_t)as, VGE_EE_EADDR, 3, 0);
for (i = 0; i < 3; i++) {
eaddr[(i * 2) + 0] = as[i] & 0xff;
eaddr[(i * 2) + 1] = as[i] >> 8;
}
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
printf(", address %s\n",
ether_sprintf(sc->arpcom.ac_enaddr));
error = vge_allocmem(sc);
if (error)
return;
ifp = &sc->arpcom.ac_if;
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = vge_ioctl;
ifp->if_start = vge_start;
ifp->if_watchdog = vge_watchdog;
ifp->if_init = vge_init;
ifp->if_baudrate = 1000000000;
#ifdef VGE_JUMBO
ifp->if_hardmtu = VGE_JUMBO_MTU;
#endif
IFQ_SET_MAXLEN(&ifp->if_snd, VGE_IFQ_MAXLEN);
IFQ_SET_READY(&ifp->if_snd);
ifp->if_capabilities = IFCAP_VLAN_MTU | IFCAP_CSUM_IPv4 |
IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4;
#ifdef VGE_VLAN
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING;
#endif
/* Set interface name */
strlcpy(ifp->if_xname, sc->vge_dev.dv_xname, IFNAMSIZ);
/* Do MII setup */
sc->sc_mii.mii_ifp = ifp;
sc->sc_mii.mii_readreg = vge_miibus_readreg;
sc->sc_mii.mii_writereg = vge_miibus_writereg;
sc->sc_mii.mii_statchg = vge_miibus_statchg;
ifmedia_init(&sc->sc_mii.mii_media, 0,
vge_ifmedia_upd, vge_ifmedia_sts);
mii_attach(self, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
printf("%s: no PHY found!\n", sc->vge_dev.dv_xname);
ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL,
0, NULL);
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_MANUAL);
} else
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
timeout_set(&sc->timer_handle, vge_tick, sc);
/*
* Call MI attach routine.
*/
if_attach(ifp);
ether_ifattach(ifp);
}
int
vge_newbuf(struct vge_softc *sc, int idx, struct mbuf *m)
{
struct mbuf *m_new = NULL;
struct vge_rx_desc *r;
bus_dmamap_t rxmap = sc->vge_ldata.vge_rx_dmamap[idx];
int i;
if (m == NULL) {
/* Allocate a new mbuf */
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL)
return (ENOBUFS);
/* Allocate a cluster */
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
m_freem(m_new);
return (ENOBUFS);
}
} else
m_new->m_data = m_new->m_ext.ext_buf;
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
/* Fix-up alignment so payload is doubleword-aligned */
/* XXX m_adj(m_new, ETHER_ALIGN); */
if (bus_dmamap_load_mbuf(sc->sc_dmat, rxmap, m_new, BUS_DMA_NOWAIT))
return (ENOBUFS);
if (rxmap->dm_nsegs > 1)
goto out;
/* Map the segments into RX descriptors */
r = &sc->vge_ldata.vge_rx_list[idx];
if (letoh32(r->vge_sts) & VGE_RDSTS_OWN) {
printf("%s: tried to map a busy RX descriptor\n",
sc->vge_dev.dv_xname);
goto out;
}
r->vge_buflen = htole16(VGE_BUFLEN(rxmap->dm_segs[0].ds_len) | VGE_RXDESC_I);
r->vge_addrlo = htole32(VGE_ADDR_LO(rxmap->dm_segs[0].ds_addr));
r->vge_addrhi = htole16(VGE_ADDR_HI(rxmap->dm_segs[0].ds_addr) & 0xFFFF);
r->vge_sts = htole32(0);
r->vge_ctl = htole32(0);
/*
* Note: the manual fails to document the fact that for
* proper operation, the driver needs to replenish the RX
* DMA ring 4 descriptors at a time (rather than one at a
* time, like most chips). We can allocate the new buffers
* but we should not set the OWN bits until we're ready
* to hand back 4 of them in one shot.
*/
#define VGE_RXCHUNK 4
sc->vge_rx_consumed++;
if (sc->vge_rx_consumed == VGE_RXCHUNK) {
for (i = idx; i != idx - sc->vge_rx_consumed; i--)
sc->vge_ldata.vge_rx_list[i].vge_sts |=
htole32(VGE_RDSTS_OWN);
sc->vge_rx_consumed = 0;
}
sc->vge_ldata.vge_rx_mbuf[idx] = m_new;
bus_dmamap_sync(sc->sc_dmat, rxmap, 0,
rxmap->dm_mapsize, BUS_DMASYNC_PREREAD);
return (0);
out:
DPRINTF(("vge_newbuf: out of memory\n"));
if (m_new != NULL)
m_freem(m_new);
return (ENOMEM);
}
int
vge_tx_list_init(struct vge_softc *sc)
{
bzero ((char *)sc->vge_ldata.vge_tx_list, VGE_TX_LIST_SZ);
bzero ((char *)&sc->vge_ldata.vge_tx_mbuf,
(VGE_TX_DESC_CNT * sizeof(struct mbuf *)));
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_tx_list_map, 0,
sc->vge_ldata.vge_tx_list_map->dm_mapsize,
BUS_DMASYNC_PREWRITE);
sc->vge_ldata.vge_tx_prodidx = 0;
sc->vge_ldata.vge_tx_considx = 0;
sc->vge_ldata.vge_tx_free = VGE_TX_DESC_CNT;
return (0);
}
/* Init RX descriptors and allocate mbufs with vge_newbuf()
* A ring is used, and last descriptor points to first. */
int
vge_rx_list_init(struct vge_softc *sc)
{
int i;
bzero ((char *)sc->vge_ldata.vge_rx_list, VGE_RX_LIST_SZ);
bzero ((char *)&sc->vge_ldata.vge_rx_mbuf,
(VGE_RX_DESC_CNT * sizeof(struct mbuf *)));
sc->vge_rx_consumed = 0;
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
if (vge_newbuf(sc, i, NULL) == ENOBUFS)
return (ENOBUFS);
}
/* Flush the RX descriptors */
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_rx_list_map,
0, sc->vge_ldata.vge_rx_list_map->dm_mapsize,
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
sc->vge_ldata.vge_rx_prodidx = 0;
sc->vge_rx_consumed = 0;
sc->vge_head = sc->vge_tail = NULL;
return (0);
}
/*
* RX handler. We support the reception of jumbo frames that have
* been fragmented across multiple 2K mbuf cluster buffers.
*/
void
vge_rxeof(struct vge_softc *sc)
{
struct mbuf *m;
struct ifnet *ifp;
int i, total_len;
int lim = 0;
struct vge_rx_desc *cur_rx;
u_int32_t rxstat, rxctl;
ifp = &sc->arpcom.ac_if;
i = sc->vge_ldata.vge_rx_prodidx;
/* Invalidate the descriptor memory */
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_rx_list_map,
0, sc->vge_ldata.vge_rx_list_map->dm_mapsize,
BUS_DMASYNC_POSTREAD);
while (!VGE_OWN(&sc->vge_ldata.vge_rx_list[i])) {
struct mbuf *m0 = NULL;
cur_rx = &sc->vge_ldata.vge_rx_list[i];
m = sc->vge_ldata.vge_rx_mbuf[i];
total_len = VGE_RXBYTES(cur_rx);
rxstat = letoh32(cur_rx->vge_sts);
rxctl = letoh32(cur_rx->vge_ctl);
/* Invalidate the RX mbuf and unload its map */
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_rx_dmamap[i],
0, sc->vge_ldata.vge_rx_dmamap[i]->dm_mapsize,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat,
sc->vge_ldata.vge_rx_dmamap[i]);
/*
* If the 'start of frame' bit is set, this indicates
* either the first fragment in a multi-fragment receive,
* or an intermediate fragment. Either way, we want to
* accumulate the buffers.
*/
if (rxstat & VGE_RXPKT_SOF) {
DPRINTF(("vge_rxeof: SOF\n"));
m->m_len = MCLBYTES;
if (sc->vge_head == NULL)
sc->vge_head = sc->vge_tail = m;
else {
m->m_flags &= ~M_PKTHDR;
sc->vge_tail->m_next = m;
sc->vge_tail = m;
}
vge_newbuf(sc, i, NULL);
VGE_RX_DESC_INC(i);
continue;
}
/*
* Bad/error frames will have the RXOK bit cleared.
* However, there's one error case we want to allow:
* if a VLAN tagged frame arrives and the chip can't
* match it against the CAM filter, it considers this
* a 'VLAN CAM filter miss' and clears the 'RXOK' bit.
* We don't want to drop the frame though: our VLAN
* filtering is done in software.
*/
if (!(rxstat & VGE_RDSTS_RXOK) && !(rxstat & VGE_RDSTS_VIDM)
&& !(rxstat & VGE_RDSTS_CSUMERR)) {
ifp->if_ierrors++;
/*
* If this is part of a multi-fragment packet,
* discard all the pieces.
*/
if (sc->vge_head != NULL) {
m_freem(sc->vge_head);
sc->vge_head = sc->vge_tail = NULL;
}
vge_newbuf(sc, i, m);
VGE_RX_DESC_INC(i);
continue;
}
/*
* If allocating a replacement mbuf fails,
* reload the current one.
*/
if (vge_newbuf(sc, i, NULL) == ENOBUFS) {
if (sc->vge_head != NULL) {
m_freem(sc->vge_head);
sc->vge_head = sc->vge_tail = NULL;
}
m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
total_len - ETHER_CRC_LEN + ETHER_ALIGN,
0, ifp, NULL);
vge_newbuf(sc, i, m);
if (m0 == NULL) {
ifp->if_ierrors++;
continue;
}
m_adj(m0, ETHER_ALIGN);
m = m0;
VGE_RX_DESC_INC(i);
continue;
}
VGE_RX_DESC_INC(i);
if (sc->vge_head != NULL) {
m->m_len = total_len % MCLBYTES;
/*
* Special case: if there's 4 bytes or less
* in this buffer, the mbuf can be discarded:
* the last 4 bytes is the CRC, which we don't
* care about anyway.
*/
if (m->m_len <= ETHER_CRC_LEN) {
sc->vge_tail->m_len -=
(ETHER_CRC_LEN - m->m_len);
m_freem(m);
} else {
m->m_len -= ETHER_CRC_LEN;
m->m_flags &= ~M_PKTHDR;
sc->vge_tail->m_next = m;
}
m = sc->vge_head;
sc->vge_head = sc->vge_tail = NULL;
m->m_pkthdr.len = total_len - ETHER_CRC_LEN;
} else
m->m_pkthdr.len = m->m_len =
(total_len - ETHER_CRC_LEN);
#ifdef __STRICT_ALIGNMENT
bcopy(m->m_data, m->m_data + ETHER_ALIGN,
total_len);
m->m_data += ETHER_ALIGN;
#endif
ifp->if_ipackets++;
m->m_pkthdr.rcvif = ifp;
/* Do RX checksumming */
/* Check IP header checksum */
if ((rxctl & VGE_RDCTL_IPPKT) &&
(rxctl & VGE_RDCTL_IPCSUMOK))
m->m_pkthdr.csum_flags |= M_IPV4_CSUM_IN_OK;
/* Check TCP/UDP checksum */
if ((rxctl & (VGE_RDCTL_TCPPKT|VGE_RDCTL_UDPPKT)) &&
(rxctl & VGE_RDCTL_PROTOCSUMOK))
m->m_pkthdr.csum_flags |= M_TCP_CSUM_IN_OK | M_UDP_CSUM_IN_OK;
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_IN);
#endif
ether_input_mbuf(ifp, m);
lim++;
if (lim == VGE_RX_DESC_CNT)
break;
}
/* Flush the RX DMA ring */
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_rx_list_map,
0, sc->vge_ldata.vge_rx_list_map->dm_mapsize,
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
sc->vge_ldata.vge_rx_prodidx = i;
CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, lim);
}
void
vge_txeof(struct vge_softc *sc)
{
struct ifnet *ifp;
u_int32_t txstat;
int idx;
ifp = &sc->arpcom.ac_if;
idx = sc->vge_ldata.vge_tx_considx;
/* Invalidate the TX descriptor list */
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_tx_list_map,
0, sc->vge_ldata.vge_tx_list_map->dm_mapsize,
BUS_DMASYNC_POSTREAD);
/* Transmitted frames can be now free'd from the TX list */
while (idx != sc->vge_ldata.vge_tx_prodidx) {
txstat = letoh32(sc->vge_ldata.vge_tx_list[idx].vge_sts);
if (txstat & VGE_TDSTS_OWN)
break;
m_freem(sc->vge_ldata.vge_tx_mbuf[idx]);
sc->vge_ldata.vge_tx_mbuf[idx] = NULL;
bus_dmamap_unload(sc->sc_dmat,
sc->vge_ldata.vge_tx_dmamap[idx]);
if (txstat & (VGE_TDSTS_EXCESSCOLL|VGE_TDSTS_COLL))
ifp->if_collisions++;
if (txstat & VGE_TDSTS_TXERR)
ifp->if_oerrors++;
else
ifp->if_opackets++;
sc->vge_ldata.vge_tx_free++;
VGE_TX_DESC_INC(idx);
}
/* No changes made to the TX ring, so no flush needed */
if (idx != sc->vge_ldata.vge_tx_considx) {
sc->vge_ldata.vge_tx_considx = idx;
ifp->if_flags &= ~IFF_OACTIVE;
ifp->if_timer = 0;
}
/*
* If not all descriptors have been released reaped yet,
* reload the timer so that we will eventually get another
* interrupt that will cause us to re-enter this routine.
* This is done in case the transmitter has gone idle.
*/
if (sc->vge_ldata.vge_tx_free != VGE_TX_DESC_CNT)
CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_TIMER0_ENABLE);
}
void
vge_tick(void *xsc)
{
struct vge_softc *sc = xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mii_data *mii = &sc->sc_mii;
int s;
s = splnet();
mii_tick(mii);
if (sc->vge_link) {
if (!(mii->mii_media_status & IFM_ACTIVE)) {
sc->vge_link = 0;
ifp->if_link_state = LINK_STATE_DOWN;
if_link_state_change(ifp);
}
} else {
if (mii->mii_media_status & IFM_ACTIVE &&
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
sc->vge_link = 1;
if (mii->mii_media_status & IFM_FDX)
ifp->if_link_state = LINK_STATE_FULL_DUPLEX;
else if (mii->mii_media_status & IFM_HDX)
ifp->if_link_state = LINK_STATE_HALF_DUPLEX;
else
ifp->if_link_state = LINK_STATE_UP;
if_link_state_change(ifp);
if (!IFQ_IS_EMPTY(&ifp->if_snd))
vge_start(ifp);
}
}
timeout_add(&sc->timer_handle, hz);
splx(s);
}
int
vge_intr(void *arg)
{
struct vge_softc *sc = arg;
struct ifnet *ifp;
u_int32_t status;
int claimed = 0;
ifp = &sc->arpcom.ac_if;
if (!(ifp->if_flags & IFF_UP))
return 0;
/* Disable interrupts */
CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK);
for (;;) {
status = CSR_READ_4(sc, VGE_ISR);
DPRINTFN(3, ("vge_intr: status=%#x\n", status));
/* If the card has gone away the read returns 0xffffffff. */
if (status == 0xFFFFFFFF)
break;
if (status) {
CSR_WRITE_4(sc, VGE_ISR, status);
}
if ((status & VGE_INTRS) == 0)
break;
claimed = 1;
if (status & (VGE_ISR_RXOK|VGE_ISR_RXOK_HIPRIO))
vge_rxeof(sc);
if (status & (VGE_ISR_RXOFLOW|VGE_ISR_RXNODESC)) {
DPRINTFN(2, ("vge_intr: RX error, recovering\n"));
vge_rxeof(sc);
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
}
if (status & (VGE_ISR_TXOK0|VGE_ISR_TIMER0))
vge_txeof(sc);
if (status & (VGE_ISR_TXDMA_STALL|VGE_ISR_RXDMA_STALL)) {
DPRINTFN(2, ("DMA_STALL\n"));
vge_init(ifp);
}
if (status & VGE_ISR_LINKSTS) {
timeout_del(&sc->timer_handle);
vge_tick(sc);
}
}
/* Re-enable interrupts */
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
if (!IFQ_IS_EMPTY(&ifp->if_snd))
vge_start(ifp);
return (claimed);
}
/*
* Encapsulate an mbuf chain into the TX ring by combining it w/
* the descriptors.
*/
int
vge_encap(struct vge_softc *sc, struct mbuf *m_head, int idx)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
bus_dmamap_t txmap;
struct vge_tx_desc *d = NULL;
struct vge_tx_frag *f;
struct mbuf *mnew = NULL;
int error, frag;
u_int32_t vge_flags;
#if NVLAN > 0
struct ifvlan *ifv = NULL;
if ((m_head->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) &&
m_head->m_pkthdr.rcvif != NULL)
ifv = m_head->m_pkthdr.rcvif->if_softc;
#endif
vge_flags = 0;
if (m_head->m_pkthdr.csum_flags & M_IPV4_CSUM_OUT)
vge_flags |= VGE_TDCTL_IPCSUM;
if (m_head->m_pkthdr.csum_flags & M_TCPV4_CSUM_OUT)
vge_flags |= VGE_TDCTL_TCPCSUM;
if (m_head->m_pkthdr.csum_flags & M_UDPV4_CSUM_OUT)
vge_flags |= VGE_TDCTL_UDPCSUM;
txmap = sc->vge_ldata.vge_tx_dmamap[idx];
repack:
error = bus_dmamap_load_mbuf(sc->sc_dmat, txmap,
m_head, BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't map mbuf (error %d)\n",
sc->vge_dev.dv_xname, error);
return (ENOBUFS);
}
d = &sc->vge_ldata.vge_tx_list[idx];
/* If owned by chip, fail */
if (letoh32(d->vge_sts) & VGE_TDSTS_OWN)
return (ENOBUFS);
for (frag = 0; frag < txmap->dm_nsegs; frag++) {
/* Check if we have used all 7 fragments. */
if (frag == VGE_TX_FRAGS)
break;
f = &d->vge_frag[frag];
f->vge_buflen = htole16(VGE_BUFLEN(txmap->dm_segs[frag].ds_len));
f->vge_addrlo = htole32(VGE_ADDR_LO(txmap->dm_segs[frag].ds_addr));
f->vge_addrhi = htole16(VGE_ADDR_HI(txmap->dm_segs[frag].ds_addr) & 0xFFFF);
}
/*
* We used up all 7 fragments! Now what we have to do is
* copy the data into a mbuf cluster and map that.
*/
if (frag == VGE_TX_FRAGS) {
MGETHDR(mnew, M_DONTWAIT, MT_DATA);
if (mnew == NULL)
return (ENOBUFS);
if (m_head->m_pkthdr.len > MHLEN) {
MCLGET(mnew, M_DONTWAIT);
if (!(mnew->m_flags & M_EXT)) {
m_freem(mnew);
return (ENOBUFS);
}
}
m_copydata(m_head, 0, m_head->m_pkthdr.len,
mtod(mnew, caddr_t));
mnew->m_pkthdr.len = mnew->m_len = m_head->m_pkthdr.len;
IFQ_DEQUEUE(&ifp->if_snd, m_head);
m_freem(m_head);
m_head = mnew;
goto repack;
}
/* This chip does not do auto-padding */
if (m_head->m_pkthdr.len < VGE_MIN_FRAMELEN) {
f = &d->vge_frag[frag];
f->vge_buflen = htole16(VGE_BUFLEN(VGE_MIN_FRAMELEN -
m_head->m_pkthdr.len));
f->vge_addrlo = htole32(VGE_ADDR_LO(txmap->dm_segs[0].ds_addr));
f->vge_addrhi = htole16(VGE_ADDR_HI(txmap->dm_segs[0].ds_addr) & 0xFFFF);
m_head->m_pkthdr.len = VGE_MIN_FRAMELEN;
frag++;
}
/* For some reason, we need to tell the card fragment + 1 */
frag++;
bus_dmamap_sync(sc->sc_dmat, txmap, 0, txmap->dm_mapsize,
BUS_DMASYNC_PREWRITE);
d->vge_sts = htole32(m_head->m_pkthdr.len << 16);
d->vge_ctl = htole32(vge_flags|(frag << 28) | VGE_TD_LS_NORM);
if (m_head->m_pkthdr.len > ETHERMTU + ETHER_HDR_LEN)
d->vge_ctl |= htole32(VGE_TDCTL_JUMBO);
sc->vge_ldata.vge_tx_dmamap[idx] = txmap;
sc->vge_ldata.vge_tx_mbuf[idx] = m_head;
sc->vge_ldata.vge_tx_free--;
sc->vge_ldata.vge_tx_list[idx].vge_sts |= htole32(VGE_TDSTS_OWN);
/*
* Set up hardware VLAN tagging.
*/
#if NVLAN > 0
if (ifv != NULL) {
sc->vge_ldata.vge_tx_list[idx].vge_ctl |=
htole32(htons(ifv->ifv_tag) | VGE_TDCTL_VTAG);
}
#endif
idx++;
if (mnew == NULL) {
/* if mbuf is coalesced, it is already dequeued */
IFQ_DEQUEUE(&ifp->if_snd, m_head);
}
return (0);
}
/*
* Main transmit routine.
*/
void
vge_start(struct ifnet *ifp)
{
struct vge_softc *sc;
struct mbuf *m_head = NULL;
int idx, pidx = 0;
sc = ifp->if_softc;
if (!sc->vge_link || ifp->if_flags & IFF_OACTIVE)
return;
if (IFQ_IS_EMPTY(&ifp->if_snd))
return;
idx = sc->vge_ldata.vge_tx_prodidx;
pidx = idx - 1;
if (pidx < 0)
pidx = VGE_TX_DESC_CNT - 1;
while (sc->vge_ldata.vge_tx_mbuf[idx] == NULL) {
IFQ_POLL(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m_head, BPF_DIRECTION_OUT);
#endif
if (vge_encap(sc, m_head, idx)) {
ifp->if_flags |= IFF_OACTIVE;
break;
}
sc->vge_ldata.vge_tx_list[pidx].vge_frag[0].vge_buflen |=
htole16(VGE_TXDESC_Q);
pidx = idx;
VGE_TX_DESC_INC(idx);
}
if (idx == sc->vge_ldata.vge_tx_prodidx) {
return;
}
/* Flush the TX descriptors */
bus_dmamap_sync(sc->sc_dmat,
sc->vge_ldata.vge_tx_list_map,
0, sc->vge_ldata.vge_tx_list_map->dm_mapsize,
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
/* Issue a transmit command. */
CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_WAK0);
sc->vge_ldata.vge_tx_prodidx = idx;
/*
* Use the countdown timer for interrupt moderation.
* 'TX done' interrupts are disabled. Instead, we reset the
* countdown timer, which will begin counting until it hits
* the value in the SSTIMER register, and then trigger an
* interrupt. Each time we set the TIMER0_ENABLE bit, the
* the timer count is reloaded. Only when the transmitter
* is idle will the timer hit 0 and an interrupt fire.
*/
CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_TIMER0_ENABLE);
/*
* Set a timeout in case the chip goes out to lunch.
*/
ifp->if_timer = 5;
}
int
vge_init(struct ifnet *ifp)
{
struct vge_softc *sc = ifp->if_softc;
int i;
/*
* Cancel pending I/O and free all RX/TX buffers.
*/
vge_stop(sc);
vge_reset(sc);
/* Initialize RX descriptors list */
if (vge_rx_list_init(sc) == ENOBUFS) {
printf("%s: init failed: no memory for RX buffers\n",
sc->vge_dev.dv_xname);
vge_stop(sc);
return (ENOBUFS);
}
/* Initialize TX descriptors */
if (vge_tx_list_init(sc) == ENOBUFS) {
printf("%s: init failed: no memory for TX buffers\n",
sc->vge_dev.dv_xname);
vge_stop(sc);
return (ENOBUFS);
}
/* Set our station address */
for (i = 0; i < ETHER_ADDR_LEN; i++)
CSR_WRITE_1(sc, VGE_PAR0 + i, sc->arpcom.ac_enaddr[i]);
/*
* Set receive FIFO threshold. Also allow transmission and
* reception of VLAN tagged frames.
*/
CSR_CLRBIT_1(sc, VGE_RXCFG, VGE_RXCFG_FIFO_THR|VGE_RXCFG_VTAGOPT);
CSR_SETBIT_1(sc, VGE_RXCFG, VGE_RXFIFOTHR_128BYTES|VGE_VTAG_OPT2);
/* Set DMA burst length */
CSR_CLRBIT_1(sc, VGE_DMACFG0, VGE_DMACFG0_BURSTLEN);
CSR_SETBIT_1(sc, VGE_DMACFG0, VGE_DMABURST_128);
CSR_SETBIT_1(sc, VGE_TXCFG, VGE_TXCFG_ARB_PRIO|VGE_TXCFG_NONBLK);
/* Set collision backoff algorithm */
CSR_CLRBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_CRANDOM|
VGE_CHIPCFG1_CAP|VGE_CHIPCFG1_MBA|VGE_CHIPCFG1_BAKOPT);
CSR_SETBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_OFSET);
/* Disable LPSEL field in priority resolution */
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_LPSEL_DIS);
/*
* Load the addresses of the DMA queues into the chip.
* Note that we only use one transmit queue.
*/
CSR_WRITE_4(sc, VGE_TXDESC_ADDR_LO0,
VGE_ADDR_LO(sc->vge_ldata.vge_tx_listseg.ds_addr));
CSR_WRITE_2(sc, VGE_TXDESCNUM, VGE_TX_DESC_CNT - 1);
CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO,
VGE_ADDR_LO(sc->vge_ldata.vge_rx_listseg.ds_addr));
CSR_WRITE_2(sc, VGE_RXDESCNUM, VGE_RX_DESC_CNT - 1);
CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, VGE_RX_DESC_CNT);
/* Enable and wake up the RX descriptor queue */
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
/* Enable the TX descriptor queue */
CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_RUN0);
/* Set up the receive filter -- allow large frames for VLANs. */
CSR_WRITE_1(sc, VGE_RXCTL, VGE_RXCTL_RX_UCAST|VGE_RXCTL_RX_GIANT);
/* If we want promiscuous mode, set the allframes bit. */
if (ifp->if_flags & IFF_PROMISC) {
CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_PROMISC);
}
/* Set capture broadcast bit to capture broadcast frames. */
if (ifp->if_flags & IFF_BROADCAST) {
CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_BCAST);
}
/* Set multicast bit to capture multicast frames. */
if (ifp->if_flags & IFF_MULTICAST) {
CSR_SETBIT_1(sc, VGE_RXCTL, VGE_RXCTL_RX_MCAST);
}
/* Init the cam filter. */
vge_cam_clear(sc);
/* Init the multicast filter. */
vge_setmulti(sc);
/* Enable flow control */
CSR_WRITE_1(sc, VGE_CRS2, 0x8B);
/* Enable jumbo frame reception (if desired) */
/* Start the MAC. */
CSR_WRITE_1(sc, VGE_CRC0, VGE_CR0_STOP);
CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_NOPOLL);
CSR_WRITE_1(sc, VGE_CRS0,
VGE_CR0_TX_ENABLE|VGE_CR0_RX_ENABLE|VGE_CR0_START);
/*
* Configure one-shot timer for microsecond
* resulution and load it for 500 usecs.
*/
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_TIMER0_RES);
CSR_WRITE_2(sc, VGE_SSTIMER, 400);
/*
* Configure interrupt moderation for receive. Enable
* the holdoff counter and load it, and set the RX
* suppression count to the number of descriptors we
* want to allow before triggering an interrupt.
* The holdoff timer is in units of 20 usecs.
*/
#ifdef notyet
CSR_WRITE_1(sc, VGE_INTCTL1, VGE_INTCTL_TXINTSUP_DISABLE);
/* Select the interrupt holdoff timer page. */
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_INTHLDOFF);
CSR_WRITE_1(sc, VGE_INTHOLDOFF, 10); /* ~200 usecs */
/* Enable use of the holdoff timer. */
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_HOLDOFF);
CSR_WRITE_1(sc, VGE_INTCTL1, VGE_INTCTL_SC_RELOAD);
/* Select the RX suppression threshold page. */
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_RXSUPPTHR);
CSR_WRITE_1(sc, VGE_RXSUPPTHR, 64); /* interrupt after 64 packets */
/* Restore the page select bits. */
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
#endif
/*
* Enable interrupts.
*/
CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS);
CSR_WRITE_4(sc, VGE_ISR, 0);
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
/* Restore BMCR state */
mii_mediachg(&sc->sc_mii);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
sc->vge_if_flags = 0;
sc->vge_link = 0;
if (!timeout_pending(&sc->timer_handle))
timeout_add(&sc->timer_handle, hz);
return (0);
}
/*
* Set media options.
*/
int
vge_ifmedia_upd(struct ifnet *ifp)
{
struct vge_softc *sc = ifp->if_softc;
return (mii_mediachg(&sc->sc_mii));
}
/*
* Report current media status.
*/
void
vge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct vge_softc *sc = ifp->if_softc;
mii_pollstat(&sc->sc_mii);
ifmr->ifm_active = sc->sc_mii.mii_media_active;
ifmr->ifm_status = sc->sc_mii.mii_media_status;
}
void
vge_miibus_statchg(struct device *dev)
{
struct vge_softc *sc = (struct vge_softc *)dev;
struct mii_data *mii;
struct ifmedia_entry *ife;
mii = &sc->sc_mii;
ife = mii->mii_media.ifm_cur;
/*
* If the user manually selects a media mode, we need to turn
* on the forced MAC mode bit in the DIAGCTL register. If the
* user happens to choose a full duplex mode, we also need to
* set the 'force full duplex' bit. This applies only to
* 10Mbps and 100Mbps speeds. In autoselect mode, forced MAC
* mode is disabled, and in 1000baseT mode, full duplex is
* always implied, so we turn on the forced mode bit but leave
* the FDX bit cleared.
*/
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
break;
case IFM_1000_T:
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
break;
case IFM_100_TX:
case IFM_10_T:
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) {
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
} else {
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
}
break;
default:
printf("%s: unknown media type: %x\n",
sc->vge_dev.dv_xname, IFM_SUBTYPE(ife->ifm_media));
break;
}
}
int
vge_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
struct vge_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
struct ifaddr *ifa = (struct ifaddr *) data;
int s, error = 0;
s = splnet();
if ((error = ether_ioctl(ifp, &sc->arpcom, command, data)) > 0) {
splx(s);
return (error);
}
switch (command) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
vge_init(ifp);
arp_ifinit(&sc->arpcom, ifa);
break;
#endif
default:
vge_init(ifp);
break;
}
break;
case SIOCSIFMTU:
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ifp->if_hardmtu)
error = EINVAL;
else if (ifp->if_mtu != ifr->ifr_mtu)
ifp->if_mtu = ifr->ifr_mtu;
break;
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if (ifp->if_flags & IFF_RUNNING &&
ifp->if_flags & IFF_PROMISC &&
!(sc->vge_if_flags & IFF_PROMISC)) {
CSR_SETBIT_1(sc, VGE_RXCTL,
VGE_RXCTL_RX_PROMISC);
vge_setmulti(sc);
} else if (ifp->if_flags & IFF_RUNNING &&
!(ifp->if_flags & IFF_PROMISC) &&
sc->vge_if_flags & IFF_PROMISC) {
CSR_CLRBIT_1(sc, VGE_RXCTL,
VGE_RXCTL_RX_PROMISC);
vge_setmulti(sc);
} else
vge_init(ifp);
} else {
if (ifp->if_flags & IFF_RUNNING)
vge_stop(sc);
}
sc->vge_if_flags = ifp->if_flags;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
error = (command == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->arpcom) :
ether_delmulti(ifr, &sc->arpcom);
if (error == ENETRESET) {
if (ifp->if_flags & IFF_RUNNING)
vge_setmulti(sc);
error = 0;
}
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, command);
break;
default:
error = ENOTTY;
break;
}
splx(s);
return (error);
}
void
vge_watchdog(struct ifnet *ifp)
{
struct vge_softc *sc = ifp->if_softc;
int s;
s = splnet();
printf("%s: watchdog timeout\n", sc->vge_dev.dv_xname);
ifp->if_oerrors++;
vge_txeof(sc);
vge_rxeof(sc);
vge_init(ifp);
splx(s);
}
/*
* Stop the adapter and free any mbufs allocated to the
* RX and TX lists.
*/
void
vge_stop(struct vge_softc *sc)
{
int i;
struct ifnet *ifp;
ifp = &sc->arpcom.ac_if;
ifp->if_timer = 0;
if (timeout_pending(&sc->timer_handle))
timeout_del(&sc->timer_handle);
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK);
CSR_WRITE_1(sc, VGE_CRS0, VGE_CR0_STOP);
CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF);
CSR_WRITE_2(sc, VGE_TXQCSRC, 0xFFFF);
CSR_WRITE_1(sc, VGE_RXQCSRC, 0xFF);
CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO, 0);
if (sc->vge_head != NULL) {
m_freem(sc->vge_head);
sc->vge_head = sc->vge_tail = NULL;
}
/* Free the TX list buffers. */
for (i = 0; i < VGE_TX_DESC_CNT; i++) {
if (sc->vge_ldata.vge_tx_mbuf[i] != NULL) {
bus_dmamap_unload(sc->sc_dmat,
sc->vge_ldata.vge_tx_dmamap[i]);
m_freem(sc->vge_ldata.vge_tx_mbuf[i]);
sc->vge_ldata.vge_tx_mbuf[i] = NULL;
}
}
/* Free the RX list buffers. */
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
if (sc->vge_ldata.vge_rx_mbuf[i] != NULL) {
bus_dmamap_unload(sc->sc_dmat,
sc->vge_ldata.vge_rx_dmamap[i]);
m_freem(sc->vge_ldata.vge_rx_mbuf[i]);
sc->vge_ldata.vge_rx_mbuf[i] = NULL;
}
}
}