[BACK]Return to if_sf_pci.c CVS log [TXT][DIR] Up to [local] / sys / dev / pci

Annotation of sys/dev/pci/if_sf_pci.c, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: if_sf_pci.c,v 1.2 2006/12/06 22:43:38 martin Exp $    */
        !             2: /*     $NetBSD: if_sf_pci.c,v 1.10 2006/06/17 23:34:27 christos Exp $  */
        !             3:
        !             4: /*-
        !             5:  * Copyright (c) 2001 The NetBSD Foundation, Inc.
        !             6:  * All rights reserved.
        !             7:  *
        !             8:  * This code is derived from software contributed to The NetBSD Foundation
        !             9:  * by Jason R. Thorpe.
        !            10:  *
        !            11:  * Redistribution and use in source and binary forms, with or without
        !            12:  * modification, are permitted provided that the following conditions
        !            13:  * are met:
        !            14:  * 1. Redistributions of source code must retain the above copyright
        !            15:  *    notice, this list of conditions and the following disclaimer.
        !            16:  * 2. Redistributions in binary form must reproduce the above copyright
        !            17:  *    notice, this list of conditions and the following disclaimer in the
        !            18:  *    documentation and/or other materials provided with the distribution.
        !            19:  * 3. All advertising materials mentioning features or use of this software
        !            20:  *    must display the following acknowledgement:
        !            21:  *     This product includes software developed by the NetBSD
        !            22:  *     Foundation, Inc. and its contributors.
        !            23:  * 4. Neither the name of The NetBSD Foundation nor the names of its
        !            24:  *    contributors may be used to endorse or promote products derived
        !            25:  *    from this software without specific prior written permission.
        !            26:  *
        !            27:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
        !            28:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
        !            29:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
        !            30:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
        !            31:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
        !            32:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
        !            33:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
        !            34:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
        !            35:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
        !            36:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
        !            37:  * POSSIBILITY OF SUCH DAMAGE.
        !            38:  */
        !            39:
        !            40: /*
        !            41:  * PCI bus front-end for the Adaptec AIC-6915 (``Starfire'')
        !            42:  * 10/100 Ethernet controller.
        !            43:  */
        !            44:
        !            45: #include <sys/param.h>
        !            46: #include <sys/systm.h>
        !            47: #include <sys/mbuf.h>
        !            48: #include <sys/malloc.h>
        !            49: #include <sys/kernel.h>
        !            50: #include <sys/socket.h>
        !            51: #include <sys/ioctl.h>
        !            52: #include <sys/errno.h>
        !            53: #include <sys/device.h>
        !            54:
        !            55: #include <net/if.h>
        !            56: #include <net/if_dl.h>
        !            57: #include <net/if_types.h>
        !            58:
        !            59: #ifdef INET
        !            60: #include <netinet/in.h>
        !            61: #include <netinet/in_systm.h>
        !            62: #include <netinet/in_var.h>
        !            63: #include <netinet/ip.h>
        !            64: #include <netinet/if_ether.h>
        !            65: #endif
        !            66:
        !            67: #include <net/if_media.h>
        !            68:
        !            69: #include <machine/bus.h>
        !            70: #include <machine/intr.h>
        !            71:
        !            72: #include <dev/mii/miivar.h>
        !            73:
        !            74: #include <dev/ic/aic6915.h>
        !            75:
        !            76: #include <dev/pci/pcireg.h>
        !            77: #include <dev/pci/pcivar.h>
        !            78: #include <dev/pci/pcidevs.h>
        !            79:
        !            80: struct sf_pci_softc {
        !            81:        struct sf_softc sc_starfire;    /* read Starfire softc */
        !            82:
        !            83:        /* PCI-specific goo. */
        !            84:        void    *sc_ih;                 /* interrupt handle */
        !            85: };
        !            86:
        !            87: int    sf_pci_match(struct device *, void *, void *);
        !            88: void   sf_pci_attach(struct device *, struct device *, void *);
        !            89:
        !            90: struct cfattach sf_pci_ca = {
        !            91:         sizeof(struct sf_pci_softc), sf_pci_match, sf_pci_attach
        !            92: };
        !            93:
        !            94: const struct pci_matchid sf_pci_products[] = {
        !            95:        { PCI_VENDOR_ADP, PCI_PRODUCT_ADP_AIC6915 },
        !            96: };
        !            97:
        !            98: int
        !            99: sf_pci_match(struct device *parent, void *match, void *aux)
        !           100: {
        !           101:        return (pci_matchbyid((struct pci_attach_args *)aux, sf_pci_products,
        !           102:            sizeof(sf_pci_products)/sizeof(sf_pci_products[0])));
        !           103: }
        !           104:
        !           105: void
        !           106: sf_pci_attach(struct device *parent, struct device *self, void *aux)
        !           107: {
        !           108:        struct sf_pci_softc *psc = (void *) self;
        !           109:        struct sf_softc *sc = &psc->sc_starfire;
        !           110:        struct pci_attach_args *pa = aux;
        !           111:        pci_intr_handle_t ih;
        !           112:        const char *intrstr = NULL;
        !           113:        bus_space_tag_t iot, memt;
        !           114:        bus_space_handle_t ioh, memh;
        !           115:        pcireg_t reg;
        !           116:        int pmreg, ioh_valid, memh_valid;
        !           117:
        !           118:        if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PWRMGMT,
        !           119:            &pmreg, 0)) {
        !           120:                reg = pci_conf_read(pa->pa_pc, pa->pa_tag, pmreg + PCI_PMCSR);
        !           121:                switch (reg & PCI_PMCSR_STATE_MASK) {
        !           122:                case PCI_PMCSR_STATE_D1:
        !           123:                case PCI_PMCSR_STATE_D2:
        !           124:                        printf(": waking up from power state D%d\n%s",
        !           125:                            reg & PCI_PMCSR_STATE_MASK, sc->sc_dev.dv_xname);
        !           126:                        pci_conf_write(pa->pa_pc, pa->pa_tag, pmreg + PCI_PMCSR,
        !           127:                            (reg & ~PCI_PMCSR_STATE_MASK) |
        !           128:                            PCI_PMCSR_STATE_D0);
        !           129:                        break;
        !           130:
        !           131:                case PCI_PMCSR_STATE_D3:
        !           132:                        printf("%s: unable to wake up from power state D3\n",
        !           133:                            sc->sc_dev.dv_xname);
        !           134:                        pci_conf_write(pa->pa_pc, pa->pa_tag, pmreg + PCI_PMCSR,
        !           135:                            (reg & ~PCI_PMCSR_STATE_MASK) |
        !           136:                            PCI_PMCSR_STATE_D0);
        !           137:                        return;
        !           138:                }
        !           139:        }
        !           140:
        !           141:        /*
        !           142:         * Map the device.
        !           143:         */
        !           144:        reg = pci_mapreg_type(pa->pa_pc, pa->pa_tag, SF_PCI_MEMBA);
        !           145:        switch (reg) {
        !           146:        case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT:
        !           147:        case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT:
        !           148:                memh_valid = (pci_mapreg_map(pa, SF_PCI_MEMBA,
        !           149:                    reg, 0, &memt, &memh, NULL, NULL, 0) == 0);
        !           150:                break;
        !           151:        default:
        !           152:                memh_valid = 0;
        !           153:        }
        !           154:
        !           155:        ioh_valid = (pci_mapreg_map(pa,
        !           156:            (reg == (PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT)) ?
        !           157:                SF_PCI_IOBA : SF_PCI_IOBA - 0x04,
        !           158:            PCI_MAPREG_TYPE_IO, 0,
        !           159:            &iot, &ioh, NULL, NULL, 0) == 0);
        !           160:
        !           161:        if (memh_valid) {
        !           162:                sc->sc_st = memt;
        !           163:                sc->sc_sh = memh;
        !           164:                sc->sc_iomapped = 0;
        !           165:        } else if (ioh_valid) {
        !           166:                sc->sc_st = iot;
        !           167:                sc->sc_sh = ioh;
        !           168:                sc->sc_iomapped = 1;
        !           169:        } else {
        !           170:                printf("%s: unable to map device registers\n",
        !           171:                    sc->sc_dev.dv_xname);
        !           172:                return;
        !           173:        }
        !           174:
        !           175:        sc->sc_dmat = pa->pa_dmat;
        !           176:
        !           177:        /* Make sure bus mastering is enabled. */
        !           178:        pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
        !           179:            pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) |
        !           180:            PCI_COMMAND_MASTER_ENABLE);
        !           181:
        !           182:        /*
        !           183:         * Map and establish our interrupt.
        !           184:         */
        !           185:        if (pci_intr_map(pa, &ih)) {
        !           186:                printf("%s: unable to map interrupt\n", sc->sc_dev.dv_xname);
        !           187:                return;
        !           188:        }
        !           189:        intrstr = pci_intr_string(pa->pa_pc, ih);
        !           190:        psc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, sf_intr, sc,
        !           191:            self->dv_xname);
        !           192:        if (psc->sc_ih == NULL) {
        !           193:                printf("%s: unable to establish interrupt",
        !           194:                    sc->sc_dev.dv_xname);
        !           195:                if (intrstr != NULL)
        !           196:                        printf(" at %s", intrstr);
        !           197:                return;
        !           198:        }
        !           199:        printf(": %s", intrstr);
        !           200:
        !           201:        /*
        !           202:         * Finish off the attach.
        !           203:         */
        !           204:        sf_attach(sc);
        !           205: }

CVSweb