File: [local] / sys / dev / pci / if_hme_pci.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:13:15 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: if_hme_pci.c,v 1.12 2006/12/21 22:13:36 jason Exp $ */
/* $NetBSD: if_hme_pci.c,v 1.3 2000/12/28 22:59:13 sommerfeld Exp $ */
/*
* Copyright (c) 2000 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* PCI front-end device driver for the HME ethernet device.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#endif
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#ifdef __sparc64__
#include <machine/autoconf.h>
#include <dev/ofw/openfirm.h>
#endif
#include <machine/cpu.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/hmevar.h>
struct hme_pci_softc {
struct hme_softc hsc_hme; /* HME device */
bus_space_tag_t hsc_memt;
bus_space_handle_t hsc_memh;
void *hsc_ih;
};
int hmematch_pci(struct device *, void *, void *);
void hmeattach_pci(struct device *, struct device *, void *);
int hme_pci_enaddr(struct hme_softc *, struct pci_attach_args *);
struct cfattach hme_pci_ca = {
sizeof(struct hme_pci_softc), hmematch_pci, hmeattach_pci
};
int
hmematch_pci(parent, vcf, aux)
struct device *parent;
void *vcf;
void *aux;
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SUN &&
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SUN_HME)
return (1);
return (0);
}
#define PCI_EBUS2_BOOTROM 0x10
#define PROMHDR_PTR_DATA 0x18
#define PROMDATA_PTR_VPD 0x08
#define PROMDATA_DATA2 0x0a
static const u_int8_t hme_promhdr[] = { 0x55, 0xaa };
static const u_int8_t hme_promdat[] = {
'P', 'C', 'I', 'R',
PCI_VENDOR_SUN & 0xff, PCI_VENDOR_SUN >> 8,
PCI_PRODUCT_SUN_HME & 0xff, PCI_PRODUCT_SUN_HME >> 8
};
static const u_int8_t hme_promdat2[] = {
0x18, 0x00, /* structure length */
0x00, /* structure revision */
0x00, /* interface revision */
PCI_SUBCLASS_NETWORK_ETHERNET, /* subclass code */
PCI_CLASS_NETWORK /* class code */
};
int
hme_pci_enaddr(struct hme_softc *sc, struct pci_attach_args *hpa)
{
struct pci_attach_args epa;
struct pci_vpd *vpd;
pcireg_t cl, id;
bus_space_handle_t romh;
bus_space_tag_t romt;
bus_size_t romsize = 0;
u_int8_t buf[32];
int dataoff, vpdoff;
/*
* Dig out VPD (vital product data) and acquire Ethernet address.
* The VPD of hme resides in the Boot PROM (PCI FCode) attached
* to the EBus interface.
* ``Writing FCode 3.x Programs'' (newer ones, dated 1997 and later)
* chapter 2 describes the data structure.
*/
/* get a PCI tag for the EBus bridge (function 0 of the same device) */
epa = *hpa;
epa.pa_tag = pci_make_tag(hpa->pa_pc, hpa->pa_bus, hpa->pa_device, 0);
cl = pci_conf_read(epa.pa_pc, epa.pa_tag, PCI_CLASS_REG);
id = pci_conf_read(epa.pa_pc, epa.pa_tag, PCI_ID_REG);
if (PCI_CLASS(cl) != PCI_CLASS_BRIDGE ||
PCI_PRODUCT(id) != PCI_PRODUCT_SUN_EBUS)
goto fail;
if (pci_mapreg_map(&epa, PCI_EBUS2_BOOTROM, PCI_MAPREG_TYPE_MEM, 0,
&romt, &romh, 0, &romsize, 0))
goto fail;
bus_space_read_region_1(romt, romh, 0, buf, sizeof(buf));
if (bcmp(buf, hme_promhdr, sizeof(hme_promhdr)))
goto fail;
dataoff = buf[PROMHDR_PTR_DATA] | (buf[PROMHDR_PTR_DATA + 1] << 8);
if (dataoff < 0x1c)
goto fail;
bus_space_read_region_1(romt, romh, dataoff, buf, sizeof(buf));
if (bcmp(buf, hme_promdat, sizeof(hme_promdat)) ||
bcmp(buf + PROMDATA_DATA2, hme_promdat2, sizeof(hme_promdat2)))
goto fail;
vpdoff = buf[PROMDATA_PTR_VPD] | (buf[PROMDATA_PTR_VPD + 1] << 8);
if (vpdoff < 0x1c)
goto fail;
/*
* The VPD of hme is not in PCI 2.2 standard format. The length
* in the resource header is in big endian, and resources are not
* properly terminated (only one resource and no end tag).
*/
bus_space_read_region_1(romt, romh, vpdoff, buf, sizeof(buf));
/* XXX TODO: Get the data from VPD */
vpd = (struct pci_vpd *)(buf + 3);
if (!PCI_VPDRES_ISLARGE(buf[0]) ||
PCI_VPDRES_LARGE_NAME(buf[0]) != PCI_VPDRES_TYPE_VPD)
goto fail;
if (vpd->vpd_key0 != 'N' || vpd->vpd_key1 != 'A')
goto fail;
bcopy(buf + 6, sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN);
sc->sc_arpcom.ac_enaddr[5] += hpa->pa_device;
bus_space_unmap(romt, romh, romsize);
return (0);
fail:
if (romsize != 0)
bus_space_unmap(romt, romh, romsize);
return (-1);
}
void
hmeattach_pci(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct pci_attach_args *pa = aux;
struct hme_pci_softc *hsc = (void *)self;
struct hme_softc *sc = &hsc->hsc_hme;
pci_intr_handle_t ih;
/* XXX the following declarations should be elsewhere */
extern void myetheraddr(u_char *);
pcireg_t csr;
const char *intrstr = NULL;
bus_size_t size;
int type, gotenaddr = 0;
/*
* enable io/memory-space accesses. this is kinda of gross; but
* the hme comes up with neither IO space enabled, or memory space.
*/
if (pa->pa_memt)
pa->pa_flags |= PCI_FLAGS_MEM_ENABLED;
if (pa->pa_iot)
pa->pa_flags |= PCI_FLAGS_IO_ENABLED;
csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
if (pa->pa_memt) {
type = PCI_MAPREG_TYPE_MEM;
csr |= PCI_COMMAND_MEM_ENABLE;
sc->sc_bustag = pa->pa_memt;
} else {
type = PCI_MAPREG_TYPE_IO;
csr |= PCI_COMMAND_IO_ENABLE;
sc->sc_bustag = pa->pa_iot;
}
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MEM_ENABLE);
sc->sc_dmatag = pa->pa_dmat;
sc->sc_pci = 1; /* XXXXX should all be done in bus_dma. */
/*
* Map five register banks:
*
* bank 0: HME SEB registers: +0x0000
* bank 1: HME ETX registers: +0x2000
* bank 2: HME ERX registers: +0x4000
* bank 3: HME MAC registers: +0x6000
* bank 4: HME MIF registers: +0x7000
*
*/
#define PCI_HME_BASEADDR 0x10
if (pci_mapreg_map(pa, PCI_HME_BASEADDR, type, 0,
&hsc->hsc_memt, &hsc->hsc_memh, NULL, &size, 0) != 0) {
printf(": could not map hme registers\n");
return;
}
sc->sc_seb = hsc->hsc_memh;
bus_space_subregion(sc->sc_bustag, hsc->hsc_memh, 0x2000, 0x2000,
&sc->sc_etx);
bus_space_subregion(sc->sc_bustag, hsc->hsc_memh, 0x4000, 0x2000,
&sc->sc_erx);
bus_space_subregion(sc->sc_bustag, hsc->hsc_memh, 0x6000, 0x1000,
&sc->sc_mac);
bus_space_subregion(sc->sc_bustag, hsc->hsc_memh, 0x7000, 0x1000,
&sc->sc_mif);
if (hme_pci_enaddr(sc, pa) == 0)
gotenaddr = 1;
#ifdef __sparc64__
if (!gotenaddr) {
if (OF_getprop(PCITAG_NODE(pa->pa_tag), "local-mac-address",
sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN) <= 0)
myetheraddr(sc->sc_arpcom.ac_enaddr);
gotenaddr = 1;
}
#endif
#ifdef __powerpc__
if (!gotenaddr) {
pci_ether_hw_addr(pa->pa_pc, sc->sc_arpcom.ac_enaddr);
gotenaddr = 1;
}
#endif
sc->sc_burst = 16; /* XXX */
if (pci_intr_map(pa, &ih) != 0) {
printf(": couldn't map interrupt\n");
bus_space_unmap(hsc->hsc_memt, hsc->hsc_memh, size);
return;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
hsc->hsc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET,
hme_intr, sc, self->dv_xname);
if (hsc->hsc_ih == NULL) {
printf(": couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
bus_space_unmap(hsc->hsc_memt, hsc->hsc_memh, size);
return;
}
printf(": %s", intrstr);
/*
* call the main configure
*/
hme_config(sc);
}