File: [local] / sys / dev / pci / if_bnx.c (download)
Revision 1.1, Tue Mar 4 16:13:58 2008 UTC (16 years, 1 month ago) by nbrk
Branch point for: MAIN
Initial revision
|
/* $OpenBSD: if_bnx.c,v 1.53 2007/07/04 00:20:22 krw Exp $ */
/*-
* Copyright (c) 2006 Broadcom Corporation
* David Christensen <davidch@broadcom.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written consent.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#if 0
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: src/sys/dev/bce/if_bce.c,v 1.3 2006/04/13 14:12:26 ru Exp $");
#endif
/*
* The following controllers are supported by this driver:
* BCM5706C A2, A3
* BCM5708C B1
*
* The following controllers are not supported by this driver:
* (These are not "Production" versions of the controller.)
*
* BCM5706C A0, A1
* BCM5706S A0, A1, A2, A3
* BCM5708C A0, B0
* BCM5708S A0, B0, B1
*/
#include <dev/pci/if_bnxreg.h>
int bnx_COM_b06FwReleaseMajor;
int bnx_COM_b06FwReleaseMinor;
int bnx_COM_b06FwReleaseFix;
u_int32_t bnx_COM_b06FwStartAddr;
u_int32_t bnx_COM_b06FwTextAddr;
int bnx_COM_b06FwTextLen;
u_int32_t bnx_COM_b06FwDataAddr;
int bnx_COM_b06FwDataLen;
u_int32_t bnx_COM_b06FwRodataAddr;
int bnx_COM_b06FwRodataLen;
u_int32_t bnx_COM_b06FwBssAddr;
int bnx_COM_b06FwBssLen;
u_int32_t bnx_COM_b06FwSbssAddr;
int bnx_COM_b06FwSbssLen;
int bnx_RXP_b06FwReleaseMajor;
int bnx_RXP_b06FwReleaseMinor;
int bnx_RXP_b06FwReleaseFix;
u_int32_t bnx_RXP_b06FwStartAddr;
u_int32_t bnx_RXP_b06FwTextAddr;
int bnx_RXP_b06FwTextLen;
u_int32_t bnx_RXP_b06FwDataAddr;
int bnx_RXP_b06FwDataLen;
u_int32_t bnx_RXP_b06FwRodataAddr;
int bnx_RXP_b06FwRodataLen;
u_int32_t bnx_RXP_b06FwBssAddr;
int bnx_RXP_b06FwBssLen;
u_int32_t bnx_RXP_b06FwSbssAddr;
int bnx_RXP_b06FwSbssLen;
int bnx_TPAT_b06FwReleaseMajor;
int bnx_TPAT_b06FwReleaseMinor;
int bnx_TPAT_b06FwReleaseFix;
u_int32_t bnx_TPAT_b06FwStartAddr;
u_int32_t bnx_TPAT_b06FwTextAddr;
int bnx_TPAT_b06FwTextLen;
u_int32_t bnx_TPAT_b06FwDataAddr;
int bnx_TPAT_b06FwDataLen;
u_int32_t bnx_TPAT_b06FwRodataAddr;
int bnx_TPAT_b06FwRodataLen;
u_int32_t bnx_TPAT_b06FwBssAddr;
int bnx_TPAT_b06FwBssLen;
u_int32_t bnx_TPAT_b06FwSbssAddr;
int bnx_TPAT_b06FwSbssLen;
int bnx_TXP_b06FwReleaseMajor;
int bnx_TXP_b06FwReleaseMinor;
int bnx_TXP_b06FwReleaseFix;
u_int32_t bnx_TXP_b06FwStartAddr;
u_int32_t bnx_TXP_b06FwTextAddr;
int bnx_TXP_b06FwTextLen;
u_int32_t bnx_TXP_b06FwDataAddr;
int bnx_TXP_b06FwDataLen;
u_int32_t bnx_TXP_b06FwRodataAddr;
int bnx_TXP_b06FwRodataLen;
u_int32_t bnx_TXP_b06FwBssAddr;
int bnx_TXP_b06FwBssLen;
u_int32_t bnx_TXP_b06FwSbssAddr;
int bnx_TXP_b06FwSbssLen;
int bnx_rv2p_proc1len;
int bnx_rv2p_proc2len;
u_int32_t *bnx_COM_b06FwText;
u_int32_t *bnx_COM_b06FwData;
u_int32_t *bnx_COM_b06FwRodata;
u_int32_t *bnx_COM_b06FwBss;
u_int32_t *bnx_COM_b06FwSbss;
u_int32_t *bnx_RXP_b06FwText;
u_int32_t *bnx_RXP_b06FwData;
u_int32_t *bnx_RXP_b06FwRodata;
u_int32_t *bnx_RXP_b06FwBss;
u_int32_t *bnx_RXP_b06FwSbss;
u_int32_t *bnx_TPAT_b06FwText;
u_int32_t *bnx_TPAT_b06FwData;
u_int32_t *bnx_TPAT_b06FwRodata;
u_int32_t *bnx_TPAT_b06FwBss;
u_int32_t *bnx_TPAT_b06FwSbss;
u_int32_t *bnx_TXP_b06FwText;
u_int32_t *bnx_TXP_b06FwData;
u_int32_t *bnx_TXP_b06FwRodata;
u_int32_t *bnx_TXP_b06FwBss;
u_int32_t *bnx_TXP_b06FwSbss;
u_int32_t *bnx_rv2p_proc1;
u_int32_t *bnx_rv2p_proc2;
void nswaph(u_int32_t *p, int wcount);
/****************************************************************************/
/* BNX Driver Version */
/****************************************************************************/
char bnx_driver_version[] = "v0.9.6";
/****************************************************************************/
/* BNX Debug Options */
/****************************************************************************/
#ifdef BNX_DEBUG
u_int32_t bnx_debug = BNX_WARN;
/* 0 = Never */
/* 1 = 1 in 2,147,483,648 */
/* 256 = 1 in 8,388,608 */
/* 2048 = 1 in 1,048,576 */
/* 65536 = 1 in 32,768 */
/* 1048576 = 1 in 2,048 */
/* 268435456 = 1 in 8 */
/* 536870912 = 1 in 4 */
/* 1073741824 = 1 in 2 */
/* Controls how often the l2_fhdr frame error check will fail. */
int bnx_debug_l2fhdr_status_check = 0;
/* Controls how often the unexpected attention check will fail. */
int bnx_debug_unexpected_attention = 0;
/* Controls how often to simulate an mbuf allocation failure. */
int bnx_debug_mbuf_allocation_failure = 0;
/* Controls how often to simulate a DMA mapping failure. */
int bnx_debug_dma_map_addr_failure = 0;
/* Controls how often to simulate a bootcode failure. */
int bnx_debug_bootcode_running_failure = 0;
#endif
/****************************************************************************/
/* PCI Device ID Table */
/* */
/* Used by bnx_probe() to identify the devices supported by this driver. */
/****************************************************************************/
const struct pci_matchid bnx_devices[] = {
{ PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5706 },
{ PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5706S },
{ PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5708 },
{ PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5708S }
#if 0
{ PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5709 },
{ PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5709S }
#endif
};
/****************************************************************************/
/* Supported Flash NVRAM device data. */
/****************************************************************************/
static struct flash_spec flash_table[] =
{
/* Slow EEPROM */
{0x00000000, 0x40830380, 0x009f0081, 0xa184a053, 0xaf000400,
1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
"EEPROM - slow"},
/* Expansion entry 0001 */
{0x08000002, 0x4b808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 0001"},
/* Saifun SA25F010 (non-buffered flash) */
/* strap, cfg1, & write1 need updates */
{0x04000001, 0x47808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2,
"Non-buffered flash (128kB)"},
/* Saifun SA25F020 (non-buffered flash) */
/* strap, cfg1, & write1 need updates */
{0x0c000003, 0x4f808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4,
"Non-buffered flash (256kB)"},
/* Expansion entry 0100 */
{0x11000000, 0x53808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 0100"},
/* Entry 0101: ST M45PE10 (non-buffered flash, TetonII B0) */
{0x19000002, 0x5b808201, 0x000500db, 0x03840253, 0xaf020406,
0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*2,
"Entry 0101: ST M45PE10 (128kB non-bufferred)"},
/* Entry 0110: ST M45PE20 (non-buffered flash)*/
{0x15000001, 0x57808201, 0x000500db, 0x03840253, 0xaf020406,
0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*4,
"Entry 0110: ST M45PE20 (256kB non-bufferred)"},
/* Saifun SA25F005 (non-buffered flash) */
/* strap, cfg1, & write1 need updates */
{0x1d000003, 0x5f808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE,
"Non-buffered flash (64kB)"},
/* Fast EEPROM */
{0x22000000, 0x62808380, 0x009f0081, 0xa184a053, 0xaf000400,
1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
"EEPROM - fast"},
/* Expansion entry 1001 */
{0x2a000002, 0x6b808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1001"},
/* Expansion entry 1010 */
{0x26000001, 0x67808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1010"},
/* ATMEL AT45DB011B (buffered flash) */
{0x2e000003, 0x6e808273, 0x00570081, 0x68848353, 0xaf000400,
1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE,
"Buffered flash (128kB)"},
/* Expansion entry 1100 */
{0x33000000, 0x73808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1100"},
/* Expansion entry 1101 */
{0x3b000002, 0x7b808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1101"},
/* Ateml Expansion entry 1110 */
{0x37000001, 0x76808273, 0x00570081, 0x68848353, 0xaf000400,
1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
BUFFERED_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1110 (Atmel)"},
/* ATMEL AT45DB021B (buffered flash) */
{0x3f000003, 0x7e808273, 0x00570081, 0x68848353, 0xaf000400,
1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE*2,
"Buffered flash (256kB)"},
};
/****************************************************************************/
/* OpenBSD device entry points. */
/****************************************************************************/
int bnx_probe(struct device *, void *, void *);
void bnx_attach(struct device *, struct device *, void *);
void bnx_attachhook(void *);
int bnx_read_firmware(struct bnx_softc *sc);
#if 0
void bnx_detach(void *);
#endif
void bnx_shutdown(void *);
/****************************************************************************/
/* BNX Debug Data Structure Dump Routines */
/****************************************************************************/
#ifdef BNX_DEBUG
void bnx_dump_mbuf(struct bnx_softc *, struct mbuf *);
void bnx_dump_tx_mbuf_chain(struct bnx_softc *, int, int);
void bnx_dump_rx_mbuf_chain(struct bnx_softc *, int, int);
void bnx_dump_txbd(struct bnx_softc *, int, struct tx_bd *);
void bnx_dump_rxbd(struct bnx_softc *, int, struct rx_bd *);
void bnx_dump_l2fhdr(struct bnx_softc *, int, struct l2_fhdr *);
void bnx_dump_tx_chain(struct bnx_softc *, int, int);
void bnx_dump_rx_chain(struct bnx_softc *, int, int);
void bnx_dump_status_block(struct bnx_softc *);
void bnx_dump_stats_block(struct bnx_softc *);
void bnx_dump_driver_state(struct bnx_softc *);
void bnx_dump_hw_state(struct bnx_softc *);
void bnx_breakpoint(struct bnx_softc *);
#endif
/****************************************************************************/
/* BNX Register/Memory Access Routines */
/****************************************************************************/
u_int32_t bnx_reg_rd_ind(struct bnx_softc *, u_int32_t);
void bnx_reg_wr_ind(struct bnx_softc *, u_int32_t, u_int32_t);
void bnx_ctx_wr(struct bnx_softc *, u_int32_t, u_int32_t, u_int32_t);
int bnx_miibus_read_reg(struct device *, int, int);
void bnx_miibus_write_reg(struct device *, int, int, int);
void bnx_miibus_statchg(struct device *);
/****************************************************************************/
/* BNX NVRAM Access Routines */
/****************************************************************************/
int bnx_acquire_nvram_lock(struct bnx_softc *);
int bnx_release_nvram_lock(struct bnx_softc *);
void bnx_enable_nvram_access(struct bnx_softc *);
void bnx_disable_nvram_access(struct bnx_softc *);
int bnx_nvram_read_dword(struct bnx_softc *, u_int32_t, u_int8_t *,
u_int32_t);
int bnx_init_nvram(struct bnx_softc *);
int bnx_nvram_read(struct bnx_softc *, u_int32_t, u_int8_t *, int);
int bnx_nvram_test(struct bnx_softc *);
#ifdef BNX_NVRAM_WRITE_SUPPORT
int bnx_enable_nvram_write(struct bnx_softc *);
void bnx_disable_nvram_write(struct bnx_softc *);
int bnx_nvram_erase_page(struct bnx_softc *, u_int32_t);
int bnx_nvram_write_dword(struct bnx_softc *, u_int32_t, u_int8_t *,
u_int32_t);
int bnx_nvram_write(struct bnx_softc *, u_int32_t, u_int8_t *, int);
#endif
/****************************************************************************/
/* */
/****************************************************************************/
int bnx_dma_alloc(struct bnx_softc *);
void bnx_dma_free(struct bnx_softc *);
void bnx_release_resources(struct bnx_softc *);
/****************************************************************************/
/* BNX Firmware Synchronization and Load */
/****************************************************************************/
int bnx_fw_sync(struct bnx_softc *, u_int32_t);
void bnx_load_rv2p_fw(struct bnx_softc *, u_int32_t *, u_int32_t,
u_int32_t);
void bnx_load_cpu_fw(struct bnx_softc *, struct cpu_reg *,
struct fw_info *);
void bnx_init_cpus(struct bnx_softc *);
void bnx_stop(struct bnx_softc *);
int bnx_reset(struct bnx_softc *, u_int32_t);
int bnx_chipinit(struct bnx_softc *);
int bnx_blockinit(struct bnx_softc *);
int bnx_get_buf(struct bnx_softc *, struct mbuf *, u_int16_t *,
u_int16_t *, u_int32_t *);
int bnx_init_tx_chain(struct bnx_softc *);
int bnx_init_rx_chain(struct bnx_softc *);
void bnx_free_rx_chain(struct bnx_softc *);
void bnx_free_tx_chain(struct bnx_softc *);
int bnx_tx_encap(struct bnx_softc *, struct mbuf **);
void bnx_start(struct ifnet *);
int bnx_ioctl(struct ifnet *, u_long, caddr_t);
void bnx_watchdog(struct ifnet *);
int bnx_ifmedia_upd(struct ifnet *);
void bnx_ifmedia_sts(struct ifnet *, struct ifmediareq *);
void bnx_init(void *);
void bnx_mgmt_init(struct bnx_softc *sc);
void bnx_init_context(struct bnx_softc *);
void bnx_get_mac_addr(struct bnx_softc *);
void bnx_set_mac_addr(struct bnx_softc *);
void bnx_phy_intr(struct bnx_softc *);
void bnx_rx_intr(struct bnx_softc *);
void bnx_tx_intr(struct bnx_softc *);
void bnx_disable_intr(struct bnx_softc *);
void bnx_enable_intr(struct bnx_softc *);
int bnx_intr(void *);
void bnx_set_rx_mode(struct bnx_softc *);
void bnx_stats_update(struct bnx_softc *);
void bnx_tick(void *);
/****************************************************************************/
/* OpenBSD device dispatch table. */
/****************************************************************************/
struct cfattach bnx_ca = {
sizeof(struct bnx_softc), bnx_probe, bnx_attach
};
struct cfdriver bnx_cd = {
0, "bnx", DV_IFNET
};
/****************************************************************************/
/* Device probe function. */
/* */
/* Compares the device to the driver's list of supported devices and */
/* reports back to the OS whether this is the right driver for the device. */
/* */
/* Returns: */
/* BUS_PROBE_DEFAULT on success, positive value on failure. */
/****************************************************************************/
int
bnx_probe(struct device *parent, void *match, void *aux)
{
return (pci_matchbyid((struct pci_attach_args *)aux, bnx_devices,
sizeof(bnx_devices)/sizeof(bnx_devices[0])));
}
void
nswaph(u_int32_t *p, int wcount)
{
for (; wcount; wcount -=4) {
*p = ntohl(*p);
p++;
}
}
int
bnx_read_firmware(struct bnx_softc *sc)
{
static struct bnx_firmware_header *hdr;
u_char *p, *q;
size_t size;
int error;
if (hdr)
return (0);
if ((error = loadfirmware("bnx", &p, &size)) != 0)
return error;
if (size < sizeof (struct bnx_firmware_header)) {
free(p, M_DEVBUF);
return EINVAL;
}
hdr = (struct bnx_firmware_header *)p;
bnx_COM_b06FwReleaseMajor = ntohl(hdr->bnx_COM_b06FwReleaseMajor);
bnx_COM_b06FwReleaseMinor = ntohl(hdr->bnx_COM_b06FwReleaseMinor);
bnx_COM_b06FwReleaseFix = ntohl(hdr->bnx_COM_b06FwReleaseFix);
bnx_COM_b06FwStartAddr = ntohl(hdr->bnx_COM_b06FwStartAddr);
bnx_COM_b06FwTextAddr = ntohl(hdr->bnx_COM_b06FwTextAddr);
bnx_COM_b06FwTextLen = ntohl(hdr->bnx_COM_b06FwTextLen);
bnx_COM_b06FwDataAddr = ntohl(hdr->bnx_COM_b06FwDataAddr);
bnx_COM_b06FwDataLen = ntohl(hdr->bnx_COM_b06FwDataLen);
bnx_COM_b06FwRodataAddr = ntohl(hdr->bnx_COM_b06FwRodataAddr);
bnx_COM_b06FwRodataLen = ntohl(hdr->bnx_COM_b06FwRodataLen);
bnx_COM_b06FwBssAddr = ntohl(hdr->bnx_COM_b06FwBssAddr);
bnx_COM_b06FwBssLen = ntohl(hdr->bnx_COM_b06FwBssLen);
bnx_COM_b06FwSbssAddr = ntohl(hdr->bnx_COM_b06FwSbssAddr);
bnx_COM_b06FwSbssLen = ntohl(hdr->bnx_COM_b06FwSbssLen);
bnx_RXP_b06FwReleaseMajor = ntohl(hdr->bnx_RXP_b06FwReleaseMajor);
bnx_RXP_b06FwReleaseMinor = ntohl(hdr->bnx_RXP_b06FwReleaseMinor);
bnx_RXP_b06FwReleaseFix = ntohl(hdr->bnx_RXP_b06FwReleaseFix);
bnx_RXP_b06FwStartAddr = ntohl(hdr->bnx_RXP_b06FwStartAddr);
bnx_RXP_b06FwTextAddr = ntohl(hdr->bnx_RXP_b06FwTextAddr);
bnx_RXP_b06FwTextLen = ntohl(hdr->bnx_RXP_b06FwTextLen);
bnx_RXP_b06FwDataAddr = ntohl(hdr->bnx_RXP_b06FwDataAddr);
bnx_RXP_b06FwDataLen = ntohl(hdr->bnx_RXP_b06FwDataLen);
bnx_RXP_b06FwRodataAddr = ntohl(hdr->bnx_RXP_b06FwRodataAddr);
bnx_RXP_b06FwRodataLen = ntohl(hdr->bnx_RXP_b06FwRodataLen);
bnx_RXP_b06FwBssAddr = ntohl(hdr->bnx_RXP_b06FwBssAddr);
bnx_RXP_b06FwBssLen = ntohl(hdr->bnx_RXP_b06FwBssLen);
bnx_RXP_b06FwSbssAddr = ntohl(hdr->bnx_RXP_b06FwSbssAddr);
bnx_RXP_b06FwSbssLen = ntohl(hdr->bnx_RXP_b06FwSbssLen);
bnx_TPAT_b06FwReleaseMajor = ntohl(hdr->bnx_TPAT_b06FwReleaseMajor);
bnx_TPAT_b06FwReleaseMinor = ntohl(hdr->bnx_TPAT_b06FwReleaseMinor);
bnx_TPAT_b06FwReleaseFix = ntohl(hdr->bnx_TPAT_b06FwReleaseFix);
bnx_TPAT_b06FwStartAddr = ntohl(hdr->bnx_TPAT_b06FwStartAddr);
bnx_TPAT_b06FwTextAddr = ntohl(hdr->bnx_TPAT_b06FwTextAddr);
bnx_TPAT_b06FwTextLen = ntohl(hdr->bnx_TPAT_b06FwTextLen);
bnx_TPAT_b06FwDataAddr = ntohl(hdr->bnx_TPAT_b06FwDataAddr);
bnx_TPAT_b06FwDataLen = ntohl(hdr->bnx_TPAT_b06FwDataLen);
bnx_TPAT_b06FwRodataAddr = ntohl(hdr->bnx_TPAT_b06FwRodataAddr);
bnx_TPAT_b06FwRodataLen = ntohl(hdr->bnx_TPAT_b06FwRodataLen);
bnx_TPAT_b06FwBssAddr = ntohl(hdr->bnx_TPAT_b06FwBssAddr);
bnx_TPAT_b06FwBssLen = ntohl(hdr->bnx_TPAT_b06FwBssLen);
bnx_TPAT_b06FwSbssAddr = ntohl(hdr->bnx_TPAT_b06FwSbssAddr);
bnx_TPAT_b06FwSbssLen = ntohl(hdr->bnx_TPAT_b06FwSbssLen);
bnx_TXP_b06FwReleaseMajor = ntohl(hdr->bnx_TXP_b06FwReleaseMajor);
bnx_TXP_b06FwReleaseMinor = ntohl(hdr->bnx_TXP_b06FwReleaseMinor);
bnx_TXP_b06FwReleaseFix = ntohl(hdr->bnx_TXP_b06FwReleaseFix);
bnx_TXP_b06FwStartAddr = ntohl(hdr->bnx_TXP_b06FwStartAddr);
bnx_TXP_b06FwTextAddr = ntohl(hdr->bnx_TXP_b06FwTextAddr);
bnx_TXP_b06FwTextLen = ntohl(hdr->bnx_TXP_b06FwTextLen);
bnx_TXP_b06FwDataAddr = ntohl(hdr->bnx_TXP_b06FwDataAddr);
bnx_TXP_b06FwDataLen = ntohl(hdr->bnx_TXP_b06FwDataLen);
bnx_TXP_b06FwRodataAddr = ntohl(hdr->bnx_TXP_b06FwRodataAddr);
bnx_TXP_b06FwRodataLen = ntohl(hdr->bnx_TXP_b06FwRodataLen);
bnx_TXP_b06FwBssAddr = ntohl(hdr->bnx_TXP_b06FwBssAddr);
bnx_TXP_b06FwBssLen = ntohl(hdr->bnx_TXP_b06FwBssLen);
bnx_TXP_b06FwSbssAddr = ntohl(hdr->bnx_TXP_b06FwSbssAddr);
bnx_TXP_b06FwSbssLen = ntohl(hdr->bnx_TXP_b06FwSbssLen);
bnx_rv2p_proc1len = ntohl(hdr->bnx_rv2p_proc1len);
bnx_rv2p_proc2len = ntohl(hdr->bnx_rv2p_proc2len);
q = p + sizeof(*hdr);
bnx_COM_b06FwText = (u_int32_t *)q;
q += bnx_COM_b06FwTextLen;
nswaph(bnx_COM_b06FwText, bnx_COM_b06FwTextLen);
bnx_COM_b06FwData = (u_int32_t *)q;
q += bnx_COM_b06FwDataLen;
nswaph(bnx_COM_b06FwData, bnx_COM_b06FwDataLen);
bnx_COM_b06FwRodata = (u_int32_t *)q;
q += bnx_COM_b06FwRodataLen;
nswaph(bnx_COM_b06FwRodata, bnx_COM_b06FwRodataLen);
bnx_COM_b06FwBss = (u_int32_t *)q;
q += bnx_COM_b06FwBssLen;
nswaph(bnx_COM_b06FwBss, bnx_COM_b06FwBssLen);
bnx_COM_b06FwSbss = (u_int32_t *)q;
q += bnx_COM_b06FwSbssLen;
nswaph(bnx_COM_b06FwSbss, bnx_COM_b06FwSbssLen);
bnx_RXP_b06FwText = (u_int32_t *)q;
q += bnx_RXP_b06FwTextLen;
nswaph(bnx_RXP_b06FwText, bnx_RXP_b06FwTextLen);
bnx_RXP_b06FwData = (u_int32_t *)q;
q += bnx_RXP_b06FwDataLen;
nswaph(bnx_RXP_b06FwData, bnx_RXP_b06FwDataLen);
bnx_RXP_b06FwRodata = (u_int32_t *)q;
q += bnx_RXP_b06FwRodataLen;
nswaph(bnx_RXP_b06FwRodata, bnx_RXP_b06FwRodataLen);
bnx_RXP_b06FwBss = (u_int32_t *)q;
q += bnx_RXP_b06FwBssLen;
nswaph(bnx_RXP_b06FwBss, bnx_RXP_b06FwBssLen);
bnx_RXP_b06FwSbss = (u_int32_t *)q;
q += bnx_RXP_b06FwSbssLen;
nswaph(bnx_RXP_b06FwSbss, bnx_RXP_b06FwSbssLen);
bnx_TPAT_b06FwText = (u_int32_t *)q;
q += bnx_TPAT_b06FwTextLen;
nswaph(bnx_TPAT_b06FwText, bnx_TPAT_b06FwTextLen);
bnx_TPAT_b06FwData = (u_int32_t *)q;
q += bnx_TPAT_b06FwDataLen;
nswaph(bnx_TPAT_b06FwData, bnx_TPAT_b06FwDataLen);
bnx_TPAT_b06FwRodata = (u_int32_t *)q;
q += bnx_TPAT_b06FwRodataLen;
nswaph(bnx_TPAT_b06FwRodata, bnx_TPAT_b06FwRodataLen);
bnx_TPAT_b06FwBss = (u_int32_t *)q;
q += bnx_TPAT_b06FwBssLen;
nswaph(bnx_TPAT_b06FwBss, bnx_TPAT_b06FwBssLen);
bnx_TPAT_b06FwSbss = (u_int32_t *)q;
q += bnx_TPAT_b06FwSbssLen;
nswaph(bnx_TPAT_b06FwSbss, bnx_TPAT_b06FwSbssLen);
bnx_TXP_b06FwText = (u_int32_t *)q;
q += bnx_TXP_b06FwTextLen;
nswaph(bnx_TXP_b06FwText, bnx_TXP_b06FwTextLen);
bnx_TXP_b06FwData = (u_int32_t *)q;
q += bnx_TXP_b06FwDataLen;
nswaph(bnx_TXP_b06FwData, bnx_TXP_b06FwDataLen);
bnx_TXP_b06FwRodata = (u_int32_t *)q;
q += bnx_TXP_b06FwRodataLen;
nswaph(bnx_TXP_b06FwRodata, bnx_TXP_b06FwRodataLen);
bnx_TXP_b06FwBss = (u_int32_t *)q;
q += bnx_TXP_b06FwBssLen;
nswaph(bnx_TXP_b06FwBss, bnx_TXP_b06FwBssLen);
bnx_TXP_b06FwSbss = (u_int32_t *)q;
q += bnx_TXP_b06FwSbssLen;
nswaph(bnx_TXP_b06FwSbss, bnx_TXP_b06FwSbssLen);
bnx_rv2p_proc1 = (u_int32_t *)q;
q += bnx_rv2p_proc1len;
nswaph(bnx_rv2p_proc1, bnx_rv2p_proc1len);
bnx_rv2p_proc2 = (u_int32_t *)q;
q += bnx_rv2p_proc2len;
nswaph(bnx_rv2p_proc2, bnx_rv2p_proc2len);
if (q - p != size) {
free(p, M_DEVBUF);
hdr = NULL;
return EINVAL;
}
return (0);
}
/****************************************************************************/
/* Device attach function. */
/* */
/* Allocates device resources, performs secondary chip identification, */
/* resets and initializes the hardware, and initializes driver instance */
/* variables. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
void
bnx_attach(struct device *parent, struct device *self, void *aux)
{
struct bnx_softc *sc = (struct bnx_softc *)self;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
u_int32_t val;
pcireg_t memtype;
const char *intrstr = NULL;
sc->bnx_pa = *pa;
/*
* Map control/status registers.
*/
memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, BNX_PCI_BAR0);
switch (memtype) {
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT:
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT:
if (pci_mapreg_map(pa, BNX_PCI_BAR0,
memtype, 0, &sc->bnx_btag, &sc->bnx_bhandle,
NULL, &sc->bnx_size, 0) == 0)
break;
default:
printf(": can't find mem space\n");
return;
}
if (pci_intr_map(pa, &sc->bnx_ih)) {
printf(": couldn't map interrupt\n");
goto bnx_attach_fail;
}
intrstr = pci_intr_string(pc, sc->bnx_ih);
/*
* Configure byte swap and enable indirect register access.
* Rely on CPU to do target byte swapping on big endian systems.
* Access to registers outside of PCI configurtion space are not
* valid until this is done.
*/
pci_conf_write(pa->pa_pc, pa->pa_tag, BNX_PCICFG_MISC_CONFIG,
BNX_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BNX_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
/* Save ASIC revsion info. */
sc->bnx_chipid = REG_RD(sc, BNX_MISC_ID);
/* Weed out any non-production controller revisions. */
switch(BNX_CHIP_ID(sc)) {
case BNX_CHIP_ID_5706_A0:
case BNX_CHIP_ID_5706_A1:
case BNX_CHIP_ID_5708_A0:
case BNX_CHIP_ID_5708_B0:
printf(": unsupported controller revision (%c%d)!\n",
(((pci_conf_read(pa->pa_pc, pa->pa_tag, 0x08) & 0xf0) >> 4)
+ 'A'), (pci_conf_read(pa->pa_pc, pa->pa_tag, 0x08) & 0xf));
goto bnx_attach_fail;
}
if (BNX_CHIP_BOND_ID(sc) & BNX_CHIP_BOND_ID_SERDES_BIT) {
printf(": SerDes controllers are not supported!\n");
goto bnx_attach_fail;
}
/*
* Find the base address for shared memory access.
* Newer versions of bootcode use a signature and offset
* while older versions use a fixed address.
*/
val = REG_RD_IND(sc, BNX_SHM_HDR_SIGNATURE);
if ((val & BNX_SHM_HDR_SIGNATURE_SIG_MASK) == BNX_SHM_HDR_SIGNATURE_SIG)
sc->bnx_shmem_base = REG_RD_IND(sc, BNX_SHM_HDR_ADDR_0);
else
sc->bnx_shmem_base = HOST_VIEW_SHMEM_BASE;
DBPRINT(sc, BNX_INFO, "bnx_shmem_base = 0x%08X\n", sc->bnx_shmem_base);
/* Set initial device and PHY flags */
sc->bnx_flags = 0;
sc->bnx_phy_flags = 0;
/* Get PCI bus information (speed and type). */
val = REG_RD(sc, BNX_PCICFG_MISC_STATUS);
if (val & BNX_PCICFG_MISC_STATUS_PCIX_DET) {
u_int32_t clkreg;
sc->bnx_flags |= BNX_PCIX_FLAG;
clkreg = REG_RD(sc, BNX_PCICFG_PCI_CLOCK_CONTROL_BITS);
clkreg &= BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
switch (clkreg) {
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
sc->bus_speed_mhz = 133;
break;
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
sc->bus_speed_mhz = 100;
break;
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
sc->bus_speed_mhz = 66;
break;
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
sc->bus_speed_mhz = 50;
break;
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
case BNX_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
sc->bus_speed_mhz = 33;
break;
}
} else if (val & BNX_PCICFG_MISC_STATUS_M66EN)
sc->bus_speed_mhz = 66;
else
sc->bus_speed_mhz = 33;
if (val & BNX_PCICFG_MISC_STATUS_32BIT_DET)
sc->bnx_flags |= BNX_PCI_32BIT_FLAG;
printf(": %s\n", intrstr);
/* Hookup IRQ last. */
sc->bnx_intrhand = pci_intr_establish(pc, sc->bnx_ih, IPL_NET,
bnx_intr, sc, sc->bnx_dev.dv_xname);
if (sc->bnx_intrhand == NULL) {
printf("%s: couldn't establish interrupt\n",
sc->bnx_dev.dv_xname);
goto bnx_attach_fail;
}
mountroothook_establish(bnx_attachhook, sc);
return;
bnx_attach_fail:
bnx_release_resources(sc);
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
void
bnx_attachhook(void *xsc)
{
struct bnx_softc *sc = xsc;
struct pci_attach_args *pa = &sc->bnx_pa;
struct ifnet *ifp;
u_int32_t val;
int error;
if ((error = bnx_read_firmware(sc)) != 0) {
printf("%s: could not read firmware (error=%d)\n",
sc->bnx_dev.dv_xname, error);
return;
}
/* Reset the controller. */
if (bnx_reset(sc, BNX_DRV_MSG_CODE_RESET))
goto bnx_attach_fail;
/* Initialize the controller. */
if (bnx_chipinit(sc)) {
printf("%s: Controller initialization failed!\n",
sc->bnx_dev.dv_xname);
goto bnx_attach_fail;
}
/* Perform NVRAM test. */
if (bnx_nvram_test(sc)) {
printf("%s: NVRAM test failed!\n",
sc->bnx_dev.dv_xname);
goto bnx_attach_fail;
}
/* Fetch the permanent Ethernet MAC address. */
bnx_get_mac_addr(sc);
/*
* Trip points control how many BDs
* should be ready before generating an
* interrupt while ticks control how long
* a BD can sit in the chain before
* generating an interrupt. Set the default
* values for the RX and TX rings.
*/
#ifdef BNX_DEBUG
/* Force more frequent interrupts. */
sc->bnx_tx_quick_cons_trip_int = 1;
sc->bnx_tx_quick_cons_trip = 1;
sc->bnx_tx_ticks_int = 0;
sc->bnx_tx_ticks = 0;
sc->bnx_rx_quick_cons_trip_int = 1;
sc->bnx_rx_quick_cons_trip = 1;
sc->bnx_rx_ticks_int = 0;
sc->bnx_rx_ticks = 0;
#else
sc->bnx_tx_quick_cons_trip_int = 20;
sc->bnx_tx_quick_cons_trip = 20;
sc->bnx_tx_ticks_int = 80;
sc->bnx_tx_ticks = 80;
sc->bnx_rx_quick_cons_trip_int = 6;
sc->bnx_rx_quick_cons_trip = 6;
sc->bnx_rx_ticks_int = 18;
sc->bnx_rx_ticks = 18;
#endif
/* Update statistics once every second. */
sc->bnx_stats_ticks = 1000000 & 0xffff00;
/*
* The copper based NetXtreme II controllers
* use an integrated PHY at address 1 while
* the SerDes controllers use a PHY at
* address 2.
*/
sc->bnx_phy_addr = 1;
if (BNX_CHIP_BOND_ID(sc) & BNX_CHIP_BOND_ID_SERDES_BIT) {
sc->bnx_phy_flags |= BNX_PHY_SERDES_FLAG;
sc->bnx_flags |= BNX_NO_WOL_FLAG;
if (BNX_CHIP_NUM(sc) == BNX_CHIP_NUM_5708) {
sc->bnx_phy_addr = 2;
val = REG_RD_IND(sc, sc->bnx_shmem_base +
BNX_SHARED_HW_CFG_CONFIG);
if (val & BNX_SHARED_HW_CFG_PHY_2_5G)
sc->bnx_phy_flags |= BNX_PHY_2_5G_CAPABLE_FLAG;
}
}
if (sc->bnx_phy_flags & BNX_PHY_SERDES_FLAG) {
printf(": SerDes is not supported by this driver!\n");
goto bnx_attach_fail;
}
/* Allocate DMA memory resources. */
sc->bnx_dmatag = pa->pa_dmat;
if (bnx_dma_alloc(sc)) {
printf("%s: DMA resource allocation failed!\n",
sc->bnx_dev.dv_xname);
goto bnx_attach_fail;
}
/* Initialize the ifnet interface. */
ifp = &sc->arpcom.ac_if;
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = bnx_ioctl;
ifp->if_start = bnx_start;
ifp->if_watchdog = bnx_watchdog;
if (sc->bnx_phy_flags & BNX_PHY_2_5G_CAPABLE_FLAG)
ifp->if_baudrate = IF_Gbps(2.5);
else
ifp->if_baudrate = IF_Gbps(1);
IFQ_SET_MAXLEN(&ifp->if_snd, USABLE_TX_BD - 1);
IFQ_SET_READY(&ifp->if_snd);
bcopy(sc->eaddr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
bcopy(sc->bnx_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
ifp->if_capabilities = IFCAP_VLAN_MTU;
#ifdef BNX_CSUM
ifp->if_capabilities |= IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4;
#endif
#if NVLAN > 0
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING;
#endif
sc->mbuf_alloc_size = BNX_MAX_MRU;
printf("%s: address %s\n", sc->bnx_dev.dv_xname,
ether_sprintf(sc->arpcom.ac_enaddr));
sc->bnx_mii.mii_ifp = ifp;
sc->bnx_mii.mii_readreg = bnx_miibus_read_reg;
sc->bnx_mii.mii_writereg = bnx_miibus_write_reg;
sc->bnx_mii.mii_statchg = bnx_miibus_statchg;
/* Look for our PHY. */
ifmedia_init(&sc->bnx_mii.mii_media, 0, bnx_ifmedia_upd,
bnx_ifmedia_sts);
mii_attach(&sc->bnx_dev, &sc->bnx_mii, 0xffffffff,
MII_PHY_ANY, MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->bnx_mii.mii_phys) == NULL) {
printf("%s: no PHY found!\n", sc->bnx_dev.dv_xname);
ifmedia_add(&sc->bnx_mii.mii_media,
IFM_ETHER|IFM_MANUAL, 0, NULL);
ifmedia_set(&sc->bnx_mii.mii_media,
IFM_ETHER|IFM_MANUAL);
} else {
ifmedia_set(&sc->bnx_mii.mii_media,
IFM_ETHER|IFM_AUTO);
}
/* Attach to the Ethernet interface list. */
if_attach(ifp);
ether_ifattach(ifp);
timeout_set(&sc->bnx_timeout, bnx_tick, sc);
/* Print some important debugging info. */
DBRUN(BNX_INFO, bnx_dump_driver_state(sc));
/* Get the firmware running so ASF still works. */
bnx_mgmt_init(sc);
/* Handle interrupts */
sc->bnx_flags |= BNX_ACTIVE_FLAG;
goto bnx_attach_exit;
bnx_attach_fail:
bnx_release_resources(sc);
bnx_attach_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Device detach function. */
/* */
/* Stops the controller, resets the controller, and releases resources. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
#if 0
void
bnx_detach(void *xsc)
{
struct bnx_softc *sc;
struct ifnet *ifp = &sc->arpcom.ac_if;
sc = device_get_softc(dev);
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Stop and reset the controller. */
bnx_stop(sc);
bnx_reset(sc, BNX_DRV_MSG_CODE_RESET);
ether_ifdetach(ifp);
/* If we have a child device on the MII bus remove it too. */
if (sc->bnx_phy_flags & BNX_PHY_SERDES_FLAG) {
ifmedia_removeall(&sc->bnx_ifmedia);
} else {
bus_generic_detach(dev);
device_delete_child(dev, sc->bnx_mii);
}
/* Release all remaining resources. */
bnx_release_resources(sc);
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(0);
}
#endif
/****************************************************************************/
/* Device shutdown function. */
/* */
/* Stops and resets the controller. */
/* */
/* Returns: */
/* Nothing */
/****************************************************************************/
void
bnx_shutdown(void *xsc)
{
struct bnx_softc *sc = (struct bnx_softc *)xsc;
bnx_stop(sc);
bnx_reset(sc, BNX_DRV_MSG_CODE_RESET);
}
/****************************************************************************/
/* Indirect register read. */
/* */
/* Reads NetXtreme II registers using an index/data register pair in PCI */
/* configuration space. Using this mechanism avoids issues with posted */
/* reads but is much slower than memory-mapped I/O. */
/* */
/* Returns: */
/* The value of the register. */
/****************************************************************************/
u_int32_t
bnx_reg_rd_ind(struct bnx_softc *sc, u_int32_t offset)
{
struct pci_attach_args *pa = &(sc->bnx_pa);
pci_conf_write(pa->pa_pc, pa->pa_tag, BNX_PCICFG_REG_WINDOW_ADDRESS,
offset);
#ifdef BNX_DEBUG
{
u_int32_t val;
val = pci_conf_read(pa->pa_pc, pa->pa_tag,
BNX_PCICFG_REG_WINDOW);
DBPRINT(sc, BNX_EXCESSIVE, "%s(); offset = 0x%08X, "
"val = 0x%08X\n", __FUNCTION__, offset, val);
return (val);
}
#else
return pci_conf_read(pa->pa_pc, pa->pa_tag, BNX_PCICFG_REG_WINDOW);
#endif
}
/****************************************************************************/
/* Indirect register write. */
/* */
/* Writes NetXtreme II registers using an index/data register pair in PCI */
/* configuration space. Using this mechanism avoids issues with posted */
/* writes but is muchh slower than memory-mapped I/O. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_reg_wr_ind(struct bnx_softc *sc, u_int32_t offset, u_int32_t val)
{
struct pci_attach_args *pa = &(sc->bnx_pa);
DBPRINT(sc, BNX_EXCESSIVE, "%s(); offset = 0x%08X, val = 0x%08X\n",
__FUNCTION__, offset, val);
pci_conf_write(pa->pa_pc, pa->pa_tag, BNX_PCICFG_REG_WINDOW_ADDRESS,
offset);
pci_conf_write(pa->pa_pc, pa->pa_tag, BNX_PCICFG_REG_WINDOW, val);
}
/****************************************************************************/
/* Context memory write. */
/* */
/* The NetXtreme II controller uses context memory to track connection */
/* information for L2 and higher network protocols. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_ctx_wr(struct bnx_softc *sc, u_int32_t cid_addr, u_int32_t offset,
u_int32_t val)
{
DBPRINT(sc, BNX_EXCESSIVE, "%s(); cid_addr = 0x%08X, offset = 0x%08X, "
"val = 0x%08X\n", __FUNCTION__, cid_addr, offset, val);
offset += cid_addr;
REG_WR(sc, BNX_CTX_DATA_ADR, offset);
REG_WR(sc, BNX_CTX_DATA, val);
}
/****************************************************************************/
/* PHY register read. */
/* */
/* Implements register reads on the MII bus. */
/* */
/* Returns: */
/* The value of the register. */
/****************************************************************************/
int
bnx_miibus_read_reg(struct device *dev, int phy, int reg)
{
struct bnx_softc *sc = (struct bnx_softc *)dev;
u_int32_t val;
int i;
/* Make sure we are accessing the correct PHY address. */
if (phy != sc->bnx_phy_addr) {
DBPRINT(sc, BNX_VERBOSE,
"Invalid PHY address %d for PHY read!\n", phy);
return(0);
}
if (sc->bnx_phy_flags & BNX_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val = REG_RD(sc, BNX_EMAC_MDIO_MODE);
val &= ~BNX_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BNX_EMAC_MDIO_MODE, val);
REG_RD(sc, BNX_EMAC_MDIO_MODE);
DELAY(40);
}
val = BNX_MIPHY(phy) | BNX_MIREG(reg) |
BNX_EMAC_MDIO_COMM_COMMAND_READ | BNX_EMAC_MDIO_COMM_DISEXT |
BNX_EMAC_MDIO_COMM_START_BUSY;
REG_WR(sc, BNX_EMAC_MDIO_COMM, val);
for (i = 0; i < BNX_PHY_TIMEOUT; i++) {
DELAY(10);
val = REG_RD(sc, BNX_EMAC_MDIO_COMM);
if (!(val & BNX_EMAC_MDIO_COMM_START_BUSY)) {
DELAY(5);
val = REG_RD(sc, BNX_EMAC_MDIO_COMM);
val &= BNX_EMAC_MDIO_COMM_DATA;
break;
}
}
if (val & BNX_EMAC_MDIO_COMM_START_BUSY) {
BNX_PRINTF(sc, "%s(%d): Error: PHY read timeout! phy = %d, "
"reg = 0x%04X\n", __FILE__, __LINE__, phy, reg);
val = 0x0;
} else
val = REG_RD(sc, BNX_EMAC_MDIO_COMM);
DBPRINT(sc, BNX_EXCESSIVE,
"%s(): phy = %d, reg = 0x%04X, val = 0x%04X\n", __FUNCTION__, phy,
(u_int16_t) reg & 0xffff, (u_int16_t) val & 0xffff);
if (sc->bnx_phy_flags & BNX_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val = REG_RD(sc, BNX_EMAC_MDIO_MODE);
val |= BNX_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BNX_EMAC_MDIO_MODE, val);
REG_RD(sc, BNX_EMAC_MDIO_MODE);
DELAY(40);
}
return (val & 0xffff);
}
/****************************************************************************/
/* PHY register write. */
/* */
/* Implements register writes on the MII bus. */
/* */
/* Returns: */
/* The value of the register. */
/****************************************************************************/
void
bnx_miibus_write_reg(struct device *dev, int phy, int reg, int val)
{
struct bnx_softc *sc = (struct bnx_softc *)dev;
u_int32_t val1;
int i;
/* Make sure we are accessing the correct PHY address. */
if (phy != sc->bnx_phy_addr) {
DBPRINT(sc, BNX_WARN, "Invalid PHY address %d for PHY write!\n",
phy);
return;
}
DBPRINT(sc, BNX_EXCESSIVE, "%s(): phy = %d, reg = 0x%04X, "
"val = 0x%04X\n", __FUNCTION__,
phy, (u_int16_t) reg & 0xffff, (u_int16_t) val & 0xffff);
if (sc->bnx_phy_flags & BNX_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val1 = REG_RD(sc, BNX_EMAC_MDIO_MODE);
val1 &= ~BNX_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BNX_EMAC_MDIO_MODE, val1);
REG_RD(sc, BNX_EMAC_MDIO_MODE);
DELAY(40);
}
val1 = BNX_MIPHY(phy) | BNX_MIREG(reg) | val |
BNX_EMAC_MDIO_COMM_COMMAND_WRITE |
BNX_EMAC_MDIO_COMM_START_BUSY | BNX_EMAC_MDIO_COMM_DISEXT;
REG_WR(sc, BNX_EMAC_MDIO_COMM, val1);
for (i = 0; i < BNX_PHY_TIMEOUT; i++) {
DELAY(10);
val1 = REG_RD(sc, BNX_EMAC_MDIO_COMM);
if (!(val1 & BNX_EMAC_MDIO_COMM_START_BUSY)) {
DELAY(5);
break;
}
}
if (val1 & BNX_EMAC_MDIO_COMM_START_BUSY) {
BNX_PRINTF(sc, "%s(%d): PHY write timeout!\n", __FILE__,
__LINE__);
}
if (sc->bnx_phy_flags & BNX_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val1 = REG_RD(sc, BNX_EMAC_MDIO_MODE);
val1 |= BNX_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BNX_EMAC_MDIO_MODE, val1);
REG_RD(sc, BNX_EMAC_MDIO_MODE);
DELAY(40);
}
}
/****************************************************************************/
/* MII bus status change. */
/* */
/* Called by the MII bus driver when the PHY establishes link to set the */
/* MAC interface registers. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_miibus_statchg(struct device *dev)
{
struct bnx_softc *sc = (struct bnx_softc *)dev;
struct mii_data *mii = &sc->bnx_mii;
BNX_CLRBIT(sc, BNX_EMAC_MODE, BNX_EMAC_MODE_PORT);
/* Set MII or GMII inerface based on the speed negotiated by the PHY. */
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
DBPRINT(sc, BNX_INFO, "Setting GMII interface.\n");
BNX_SETBIT(sc, BNX_EMAC_MODE, BNX_EMAC_MODE_PORT_GMII);
} else {
DBPRINT(sc, BNX_INFO, "Setting MII interface.\n");
BNX_SETBIT(sc, BNX_EMAC_MODE, BNX_EMAC_MODE_PORT_MII);
}
/* Set half or full duplex based on the duplicity
* negotiated by the PHY.
*/
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
DBPRINT(sc, BNX_INFO, "Setting Full-Duplex interface.\n");
BNX_CLRBIT(sc, BNX_EMAC_MODE, BNX_EMAC_MODE_HALF_DUPLEX);
} else {
DBPRINT(sc, BNX_INFO, "Setting Half-Duplex interface.\n");
BNX_SETBIT(sc, BNX_EMAC_MODE, BNX_EMAC_MODE_HALF_DUPLEX);
}
}
/****************************************************************************/
/* Acquire NVRAM lock. */
/* */
/* Before the NVRAM can be accessed the caller must acquire an NVRAM lock. */
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
/* for use by the driver. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_acquire_nvram_lock(struct bnx_softc *sc)
{
u_int32_t val;
int j;
DBPRINT(sc, BNX_VERBOSE, "Acquiring NVRAM lock.\n");
/* Request access to the flash interface. */
REG_WR(sc, BNX_NVM_SW_ARB, BNX_NVM_SW_ARB_ARB_REQ_SET2);
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
val = REG_RD(sc, BNX_NVM_SW_ARB);
if (val & BNX_NVM_SW_ARB_ARB_ARB2)
break;
DELAY(5);
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BNX_WARN, "Timeout acquiring NVRAM lock!\n");
return (EBUSY);
}
return (0);
}
/****************************************************************************/
/* Release NVRAM lock. */
/* */
/* When the caller is finished accessing NVRAM the lock must be released. */
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
/* for use by the driver. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_release_nvram_lock(struct bnx_softc *sc)
{
int j;
u_int32_t val;
DBPRINT(sc, BNX_VERBOSE, "Releasing NVRAM lock.\n");
/* Relinquish nvram interface. */
REG_WR(sc, BNX_NVM_SW_ARB, BNX_NVM_SW_ARB_ARB_REQ_CLR2);
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
val = REG_RD(sc, BNX_NVM_SW_ARB);
if (!(val & BNX_NVM_SW_ARB_ARB_ARB2))
break;
DELAY(5);
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BNX_WARN, "Timeout reeasing NVRAM lock!\n");
return (EBUSY);
}
return (0);
}
#ifdef BNX_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Enable NVRAM write access. */
/* */
/* Before writing to NVRAM the caller must enable NVRAM writes. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_enable_nvram_write(struct bnx_softc *sc)
{
u_int32_t val;
DBPRINT(sc, BNX_VERBOSE, "Enabling NVRAM write.\n");
val = REG_RD(sc, BNX_MISC_CFG);
REG_WR(sc, BNX_MISC_CFG, val | BNX_MISC_CFG_NVM_WR_EN_PCI);
if (!sc->bnx_flash_info->buffered) {
int j;
REG_WR(sc, BNX_NVM_COMMAND, BNX_NVM_COMMAND_DONE);
REG_WR(sc, BNX_NVM_COMMAND,
BNX_NVM_COMMAND_WREN | BNX_NVM_COMMAND_DOIT);
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
DELAY(5);
val = REG_RD(sc, BNX_NVM_COMMAND);
if (val & BNX_NVM_COMMAND_DONE)
break;
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BNX_WARN, "Timeout writing NVRAM!\n");
return (EBUSY);
}
}
return (0);
}
/****************************************************************************/
/* Disable NVRAM write access. */
/* */
/* When the caller is finished writing to NVRAM write access must be */
/* disabled. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_disable_nvram_write(struct bnx_softc *sc)
{
u_int32_t val;
DBPRINT(sc, BNX_VERBOSE, "Disabling NVRAM write.\n");
val = REG_RD(sc, BNX_MISC_CFG);
REG_WR(sc, BNX_MISC_CFG, val & ~BNX_MISC_CFG_NVM_WR_EN);
}
#endif
/****************************************************************************/
/* Enable NVRAM access. */
/* */
/* Before accessing NVRAM for read or write operations the caller must */
/* enabled NVRAM access. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_enable_nvram_access(struct bnx_softc *sc)
{
u_int32_t val;
DBPRINT(sc, BNX_VERBOSE, "Enabling NVRAM access.\n");
val = REG_RD(sc, BNX_NVM_ACCESS_ENABLE);
/* Enable both bits, even on read. */
REG_WR(sc, BNX_NVM_ACCESS_ENABLE,
val | BNX_NVM_ACCESS_ENABLE_EN | BNX_NVM_ACCESS_ENABLE_WR_EN);
}
/****************************************************************************/
/* Disable NVRAM access. */
/* */
/* When the caller is finished accessing NVRAM access must be disabled. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_disable_nvram_access(struct bnx_softc *sc)
{
u_int32_t val;
DBPRINT(sc, BNX_VERBOSE, "Disabling NVRAM access.\n");
val = REG_RD(sc, BNX_NVM_ACCESS_ENABLE);
/* Disable both bits, even after read. */
REG_WR(sc, BNX_NVM_ACCESS_ENABLE,
val & ~(BNX_NVM_ACCESS_ENABLE_EN | BNX_NVM_ACCESS_ENABLE_WR_EN));
}
#ifdef BNX_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Erase NVRAM page before writing. */
/* */
/* Non-buffered flash parts require that a page be erased before it is */
/* written. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_nvram_erase_page(struct bnx_softc *sc, u_int32_t offset)
{
u_int32_t cmd;
int j;
/* Buffered flash doesn't require an erase. */
if (sc->bnx_flash_info->buffered)
return (0);
DBPRINT(sc, BNX_VERBOSE, "Erasing NVRAM page.\n");
/* Build an erase command. */
cmd = BNX_NVM_COMMAND_ERASE | BNX_NVM_COMMAND_WR |
BNX_NVM_COMMAND_DOIT;
/*
* Clear the DONE bit separately, set the NVRAM address to erase,
* and issue the erase command.
*/
REG_WR(sc, BNX_NVM_COMMAND, BNX_NVM_COMMAND_DONE);
REG_WR(sc, BNX_NVM_ADDR, offset & BNX_NVM_ADDR_NVM_ADDR_VALUE);
REG_WR(sc, BNX_NVM_COMMAND, cmd);
/* Wait for completion. */
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
u_int32_t val;
DELAY(5);
val = REG_RD(sc, BNX_NVM_COMMAND);
if (val & BNX_NVM_COMMAND_DONE)
break;
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BNX_WARN, "Timeout erasing NVRAM.\n");
return (EBUSY);
}
return (0);
}
#endif /* BNX_NVRAM_WRITE_SUPPORT */
/****************************************************************************/
/* Read a dword (32 bits) from NVRAM. */
/* */
/* Read a 32 bit word from NVRAM. The caller is assumed to have already */
/* obtained the NVRAM lock and enabled the controller for NVRAM access. */
/* */
/* Returns: */
/* 0 on success and the 32 bit value read, positive value on failure. */
/****************************************************************************/
int
bnx_nvram_read_dword(struct bnx_softc *sc, u_int32_t offset,
u_int8_t *ret_val, u_int32_t cmd_flags)
{
u_int32_t cmd;
int i, rc = 0;
/* Build the command word. */
cmd = BNX_NVM_COMMAND_DOIT | cmd_flags;
/* Calculate the offset for buffered flash. */
if (sc->bnx_flash_info->buffered)
offset = ((offset / sc->bnx_flash_info->page_size) <<
sc->bnx_flash_info->page_bits) +
(offset % sc->bnx_flash_info->page_size);
/*
* Clear the DONE bit separately, set the address to read,
* and issue the read.
*/
REG_WR(sc, BNX_NVM_COMMAND, BNX_NVM_COMMAND_DONE);
REG_WR(sc, BNX_NVM_ADDR, offset & BNX_NVM_ADDR_NVM_ADDR_VALUE);
REG_WR(sc, BNX_NVM_COMMAND, cmd);
/* Wait for completion. */
for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) {
u_int32_t val;
DELAY(5);
val = REG_RD(sc, BNX_NVM_COMMAND);
if (val & BNX_NVM_COMMAND_DONE) {
val = REG_RD(sc, BNX_NVM_READ);
val = bnx_be32toh(val);
memcpy(ret_val, &val, 4);
break;
}
}
/* Check for errors. */
if (i >= NVRAM_TIMEOUT_COUNT) {
BNX_PRINTF(sc, "%s(%d): Timeout error reading NVRAM at "
"offset 0x%08X!\n", __FILE__, __LINE__, offset);
rc = EBUSY;
}
return(rc);
}
#ifdef BNX_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Write a dword (32 bits) to NVRAM. */
/* */
/* Write a 32 bit word to NVRAM. The caller is assumed to have already */
/* obtained the NVRAM lock, enabled the controller for NVRAM access, and */
/* enabled NVRAM write access. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_nvram_write_dword(struct bnx_softc *sc, u_int32_t offset, u_int8_t *val,
u_int32_t cmd_flags)
{
u_int32_t cmd, val32;
int j;
/* Build the command word. */
cmd = BNX_NVM_COMMAND_DOIT | BNX_NVM_COMMAND_WR | cmd_flags;
/* Calculate the offset for buffered flash. */
if (sc->bnx_flash_info->buffered)
offset = ((offset / sc->bnx_flash_info->page_size) <<
sc->bnx_flash_info->page_bits) +
(offset % sc->bnx_flash_info->page_size);
/*
* Clear the DONE bit separately, convert NVRAM data to big-endian,
* set the NVRAM address to write, and issue the write command
*/
REG_WR(sc, BNX_NVM_COMMAND, BNX_NVM_COMMAND_DONE);
memcpy(&val32, val, 4);
val32 = htobe32(val32);
REG_WR(sc, BNX_NVM_WRITE, val32);
REG_WR(sc, BNX_NVM_ADDR, offset & BNX_NVM_ADDR_NVM_ADDR_VALUE);
REG_WR(sc, BNX_NVM_COMMAND, cmd);
/* Wait for completion. */
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
DELAY(5);
if (REG_RD(sc, BNX_NVM_COMMAND) & BNX_NVM_COMMAND_DONE)
break;
}
if (j >= NVRAM_TIMEOUT_COUNT) {
BNX_PRINTF(sc, "%s(%d): Timeout error writing NVRAM at "
"offset 0x%08X\n", __FILE__, __LINE__, offset);
return (EBUSY);
}
return (0);
}
#endif /* BNX_NVRAM_WRITE_SUPPORT */
/****************************************************************************/
/* Initialize NVRAM access. */
/* */
/* Identify the NVRAM device in use and prepare the NVRAM interface to */
/* access that device. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_init_nvram(struct bnx_softc *sc)
{
u_int32_t val;
int j, entry_count, rc;
struct flash_spec *flash;
DBPRINT(sc,BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Determine the selected interface. */
val = REG_RD(sc, BNX_NVM_CFG1);
entry_count = sizeof(flash_table) / sizeof(struct flash_spec);
rc = 0;
/*
* Flash reconfiguration is required to support additional
* NVRAM devices not directly supported in hardware.
* Check if the flash interface was reconfigured
* by the bootcode.
*/
if (val & 0x40000000) {
/* Flash interface reconfigured by bootcode. */
DBPRINT(sc,BNX_INFO_LOAD,
"bnx_init_nvram(): Flash WAS reconfigured.\n");
for (j = 0, flash = &flash_table[0]; j < entry_count;
j++, flash++) {
if ((val & FLASH_BACKUP_STRAP_MASK) ==
(flash->config1 & FLASH_BACKUP_STRAP_MASK)) {
sc->bnx_flash_info = flash;
break;
}
}
} else {
/* Flash interface not yet reconfigured. */
u_int32_t mask;
DBPRINT(sc,BNX_INFO_LOAD,
"bnx_init_nvram(): Flash was NOT reconfigured.\n");
if (val & (1 << 23))
mask = FLASH_BACKUP_STRAP_MASK;
else
mask = FLASH_STRAP_MASK;
/* Look for the matching NVRAM device configuration data. */
for (j = 0, flash = &flash_table[0]; j < entry_count;
j++, flash++) {
/* Check if the dev matches any of the known devices. */
if ((val & mask) == (flash->strapping & mask)) {
/* Found a device match. */
sc->bnx_flash_info = flash;
/* Request access to the flash interface. */
if ((rc = bnx_acquire_nvram_lock(sc)) != 0)
return (rc);
/* Reconfigure the flash interface. */
bnx_enable_nvram_access(sc);
REG_WR(sc, BNX_NVM_CFG1, flash->config1);
REG_WR(sc, BNX_NVM_CFG2, flash->config2);
REG_WR(sc, BNX_NVM_CFG3, flash->config3);
REG_WR(sc, BNX_NVM_WRITE1, flash->write1);
bnx_disable_nvram_access(sc);
bnx_release_nvram_lock(sc);
break;
}
}
}
/* Check if a matching device was found. */
if (j == entry_count) {
sc->bnx_flash_info = NULL;
BNX_PRINTF(sc, "%s(%d): Unknown Flash NVRAM found!\n",
__FILE__, __LINE__);
rc = ENODEV;
}
/* Write the flash config data to the shared memory interface. */
val = REG_RD_IND(sc, sc->bnx_shmem_base + BNX_SHARED_HW_CFG_CONFIG2);
val &= BNX_SHARED_HW_CFG2_NVM_SIZE_MASK;
if (val)
sc->bnx_flash_size = val;
else
sc->bnx_flash_size = sc->bnx_flash_info->total_size;
DBPRINT(sc, BNX_INFO_LOAD, "bnx_init_nvram() flash->total_size = "
"0x%08X\n", sc->bnx_flash_info->total_size);
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return (rc);
}
/****************************************************************************/
/* Read an arbitrary range of data from NVRAM. */
/* */
/* Prepares the NVRAM interface for access and reads the requested data */
/* into the supplied buffer. */
/* */
/* Returns: */
/* 0 on success and the data read, positive value on failure. */
/****************************************************************************/
int
bnx_nvram_read(struct bnx_softc *sc, u_int32_t offset, u_int8_t *ret_buf,
int buf_size)
{
int rc = 0;
u_int32_t cmd_flags, offset32, len32, extra;
if (buf_size == 0)
return (0);
/* Request access to the flash interface. */
if ((rc = bnx_acquire_nvram_lock(sc)) != 0)
return (rc);
/* Enable access to flash interface */
bnx_enable_nvram_access(sc);
len32 = buf_size;
offset32 = offset;
extra = 0;
cmd_flags = 0;
if (offset32 & 3) {
u_int8_t buf[4];
u_int32_t pre_len;
offset32 &= ~3;
pre_len = 4 - (offset & 3);
if (pre_len >= len32) {
pre_len = len32;
cmd_flags =
BNX_NVM_COMMAND_FIRST | BNX_NVM_COMMAND_LAST;
} else
cmd_flags = BNX_NVM_COMMAND_FIRST;
rc = bnx_nvram_read_dword(sc, offset32, buf, cmd_flags);
if (rc)
return (rc);
memcpy(ret_buf, buf + (offset & 3), pre_len);
offset32 += 4;
ret_buf += pre_len;
len32 -= pre_len;
}
if (len32 & 3) {
extra = 4 - (len32 & 3);
len32 = (len32 + 4) & ~3;
}
if (len32 == 4) {
u_int8_t buf[4];
if (cmd_flags)
cmd_flags = BNX_NVM_COMMAND_LAST;
else
cmd_flags =
BNX_NVM_COMMAND_FIRST | BNX_NVM_COMMAND_LAST;
rc = bnx_nvram_read_dword(sc, offset32, buf, cmd_flags);
memcpy(ret_buf, buf, 4 - extra);
} else if (len32 > 0) {
u_int8_t buf[4];
/* Read the first word. */
if (cmd_flags)
cmd_flags = 0;
else
cmd_flags = BNX_NVM_COMMAND_FIRST;
rc = bnx_nvram_read_dword(sc, offset32, ret_buf, cmd_flags);
/* Advance to the next dword. */
offset32 += 4;
ret_buf += 4;
len32 -= 4;
while (len32 > 4 && rc == 0) {
rc = bnx_nvram_read_dword(sc, offset32, ret_buf, 0);
/* Advance to the next dword. */
offset32 += 4;
ret_buf += 4;
len32 -= 4;
}
if (rc)
return (rc);
cmd_flags = BNX_NVM_COMMAND_LAST;
rc = bnx_nvram_read_dword(sc, offset32, buf, cmd_flags);
memcpy(ret_buf, buf, 4 - extra);
}
/* Disable access to flash interface and release the lock. */
bnx_disable_nvram_access(sc);
bnx_release_nvram_lock(sc);
return (rc);
}
#ifdef BNX_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Write an arbitrary range of data from NVRAM. */
/* */
/* Prepares the NVRAM interface for write access and writes the requested */
/* data from the supplied buffer. The caller is responsible for */
/* calculating any appropriate CRCs. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_nvram_write(struct bnx_softc *sc, u_int32_t offset, u_int8_t *data_buf,
int buf_size)
{
u_int32_t written, offset32, len32;
u_int8_t *buf, start[4], end[4];
int rc = 0;
int align_start, align_end;
buf = data_buf;
offset32 = offset;
len32 = buf_size;
align_start = align_end = 0;
if ((align_start = (offset32 & 3))) {
offset32 &= ~3;
len32 += align_start;
if ((rc = bnx_nvram_read(sc, offset32, start, 4)))
return (rc);
}
if (len32 & 3) {
if ((len32 > 4) || !align_start) {
align_end = 4 - (len32 & 3);
len32 += align_end;
if ((rc = bnx_nvram_read(sc, offset32 + len32 - 4,
end, 4))) {
return (rc);
}
}
}
if (align_start || align_end) {
buf = malloc(len32, M_DEVBUF, M_NOWAIT);
if (buf == 0)
return (ENOMEM);
if (align_start)
memcpy(buf, start, 4);
if (align_end)
memcpy(buf + len32 - 4, end, 4);
memcpy(buf + align_start, data_buf, buf_size);
}
written = 0;
while ((written < len32) && (rc == 0)) {
u_int32_t page_start, page_end, data_start, data_end;
u_int32_t addr, cmd_flags;
int i;
u_int8_t flash_buffer[264];
/* Find the page_start addr */
page_start = offset32 + written;
page_start -= (page_start % sc->bnx_flash_info->page_size);
/* Find the page_end addr */
page_end = page_start + sc->bnx_flash_info->page_size;
/* Find the data_start addr */
data_start = (written == 0) ? offset32 : page_start;
/* Find the data_end addr */
data_end = (page_end > offset32 + len32) ?
(offset32 + len32) : page_end;
/* Request access to the flash interface. */
if ((rc = bnx_acquire_nvram_lock(sc)) != 0)
goto nvram_write_end;
/* Enable access to flash interface */
bnx_enable_nvram_access(sc);
cmd_flags = BNX_NVM_COMMAND_FIRST;
if (sc->bnx_flash_info->buffered == 0) {
int j;
/* Read the whole page into the buffer
* (non-buffer flash only) */
for (j = 0; j < sc->bnx_flash_info->page_size; j += 4) {
if (j == (sc->bnx_flash_info->page_size - 4))
cmd_flags |= BNX_NVM_COMMAND_LAST;
rc = bnx_nvram_read_dword(sc,
page_start + j,
&flash_buffer[j],
cmd_flags);
if (rc)
goto nvram_write_end;
cmd_flags = 0;
}
}
/* Enable writes to flash interface (unlock write-protect) */
if ((rc = bnx_enable_nvram_write(sc)) != 0)
goto nvram_write_end;
/* Erase the page */
if ((rc = bnx_nvram_erase_page(sc, page_start)) != 0)
goto nvram_write_end;
/* Re-enable the write again for the actual write */
bnx_enable_nvram_write(sc);
/* Loop to write back the buffer data from page_start to
* data_start */
i = 0;
if (sc->bnx_flash_info->buffered == 0) {
for (addr = page_start; addr < data_start;
addr += 4, i += 4) {
rc = bnx_nvram_write_dword(sc, addr,
&flash_buffer[i], cmd_flags);
if (rc != 0)
goto nvram_write_end;
cmd_flags = 0;
}
}
/* Loop to write the new data from data_start to data_end */
for (addr = data_start; addr < data_end; addr += 4, i++) {
if ((addr == page_end - 4) ||
((sc->bnx_flash_info->buffered) &&
(addr == data_end - 4))) {
cmd_flags |= BNX_NVM_COMMAND_LAST;
}
rc = bnx_nvram_write_dword(sc, addr, buf, cmd_flags);
if (rc != 0)
goto nvram_write_end;
cmd_flags = 0;
buf += 4;
}
/* Loop to write back the buffer data from data_end
* to page_end */
if (sc->bnx_flash_info->buffered == 0) {
for (addr = data_end; addr < page_end;
addr += 4, i += 4) {
if (addr == page_end-4)
cmd_flags = BNX_NVM_COMMAND_LAST;
rc = bnx_nvram_write_dword(sc, addr,
&flash_buffer[i], cmd_flags);
if (rc != 0)
goto nvram_write_end;
cmd_flags = 0;
}
}
/* Disable writes to flash interface (lock write-protect) */
bnx_disable_nvram_write(sc);
/* Disable access to flash interface */
bnx_disable_nvram_access(sc);
bnx_release_nvram_lock(sc);
/* Increment written */
written += data_end - data_start;
}
nvram_write_end:
if (align_start || align_end)
free(buf, M_DEVBUF);
return (rc);
}
#endif /* BNX_NVRAM_WRITE_SUPPORT */
/****************************************************************************/
/* Verifies that NVRAM is accessible and contains valid data. */
/* */
/* Reads the configuration data from NVRAM and verifies that the CRC is */
/* correct. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
int
bnx_nvram_test(struct bnx_softc *sc)
{
u_int32_t buf[BNX_NVRAM_SIZE / 4];
u_int8_t *data = (u_int8_t *) buf;
int rc = 0;
u_int32_t magic, csum;
/*
* Check that the device NVRAM is valid by reading
* the magic value at offset 0.
*/
if ((rc = bnx_nvram_read(sc, 0, data, 4)) != 0)
goto bnx_nvram_test_done;
magic = bnx_be32toh(buf[0]);
if (magic != BNX_NVRAM_MAGIC) {
rc = ENODEV;
BNX_PRINTF(sc, "%s(%d): Invalid NVRAM magic value! "
"Expected: 0x%08X, Found: 0x%08X\n",
__FILE__, __LINE__, BNX_NVRAM_MAGIC, magic);
goto bnx_nvram_test_done;
}
/*
* Verify that the device NVRAM includes valid
* configuration data.
*/
if ((rc = bnx_nvram_read(sc, 0x100, data, BNX_NVRAM_SIZE)) != 0)
goto bnx_nvram_test_done;
csum = ether_crc32_le(data, 0x100);
if (csum != BNX_CRC32_RESIDUAL) {
rc = ENODEV;
BNX_PRINTF(sc, "%s(%d): Invalid Manufacturing Information "
"NVRAM CRC! Expected: 0x%08X, Found: 0x%08X\n",
__FILE__, __LINE__, BNX_CRC32_RESIDUAL, csum);
goto bnx_nvram_test_done;
}
csum = ether_crc32_le(data + 0x100, 0x100);
if (csum != BNX_CRC32_RESIDUAL) {
BNX_PRINTF(sc, "%s(%d): Invalid Feature Configuration "
"Information NVRAM CRC! Expected: 0x%08X, Found: 08%08X\n",
__FILE__, __LINE__, BNX_CRC32_RESIDUAL, csum);
rc = ENODEV;
}
bnx_nvram_test_done:
return (rc);
}
/****************************************************************************/
/* Free any DMA memory owned by the driver. */
/* */
/* Scans through each data structre that requires DMA memory and frees */
/* the memory if allocated. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_dma_free(struct bnx_softc *sc)
{
int i;
DBPRINT(sc,BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Destroy the status block. */
if (sc->status_block != NULL && sc->status_map != NULL) {
bus_dmamap_unload(sc->bnx_dmatag, sc->status_map);
bus_dmamem_unmap(sc->bnx_dmatag, (caddr_t)sc->status_block,
BNX_STATUS_BLK_SZ);
bus_dmamem_free(sc->bnx_dmatag, &sc->status_seg,
sc->status_rseg);
bus_dmamap_destroy(sc->bnx_dmatag, sc->status_map);
sc->status_block = NULL;
sc->status_map = NULL;
}
/* Destroy the statistics block. */
if (sc->stats_block != NULL && sc->stats_map != NULL) {
bus_dmamap_unload(sc->bnx_dmatag, sc->stats_map);
bus_dmamem_unmap(sc->bnx_dmatag, (caddr_t)sc->stats_block,
BNX_STATS_BLK_SZ);
bus_dmamem_free(sc->bnx_dmatag, &sc->stats_seg,
sc->stats_rseg);
bus_dmamap_destroy(sc->bnx_dmatag, sc->stats_map);
sc->stats_block = NULL;
sc->stats_map = NULL;
}
/* Free, unmap and destroy all TX buffer descriptor chain pages. */
for (i = 0; i < TX_PAGES; i++ ) {
if (sc->tx_bd_chain[i] != NULL &&
sc->tx_bd_chain_map[i] != NULL) {
bus_dmamap_unload(sc->bnx_dmatag,
sc->tx_bd_chain_map[i]);
bus_dmamem_unmap(sc->bnx_dmatag,
(caddr_t)sc->tx_bd_chain[i], BNX_TX_CHAIN_PAGE_SZ);
bus_dmamem_free(sc->bnx_dmatag, &sc->tx_bd_chain_seg[i],
sc->tx_bd_chain_rseg[i]);
bus_dmamap_destroy(sc->bnx_dmatag,
sc->tx_bd_chain_map[i]);
sc->tx_bd_chain[i] = NULL;
sc->tx_bd_chain_map[i] = NULL;
}
}
/* Unload and destroy the TX mbuf maps. */
for (i = 0; i < TOTAL_TX_BD; i++) {
if (sc->tx_mbuf_map[i] != NULL) {
bus_dmamap_unload(sc->bnx_dmatag, sc->tx_mbuf_map[i]);
bus_dmamap_destroy(sc->bnx_dmatag, sc->tx_mbuf_map[i]);
}
}
/* Free, unmap and destroy all RX buffer descriptor chain pages. */
for (i = 0; i < RX_PAGES; i++ ) {
if (sc->rx_bd_chain[i] != NULL &&
sc->rx_bd_chain_map[i] != NULL) {
bus_dmamap_unload(sc->bnx_dmatag,
sc->rx_bd_chain_map[i]);
bus_dmamem_unmap(sc->bnx_dmatag,
(caddr_t)sc->rx_bd_chain[i], BNX_RX_CHAIN_PAGE_SZ);
bus_dmamem_free(sc->bnx_dmatag, &sc->rx_bd_chain_seg[i],
sc->rx_bd_chain_rseg[i]);
bus_dmamap_destroy(sc->bnx_dmatag,
sc->rx_bd_chain_map[i]);
sc->rx_bd_chain[i] = NULL;
sc->rx_bd_chain_map[i] = NULL;
}
}
/* Unload and destroy the RX mbuf maps. */
for (i = 0; i < TOTAL_RX_BD; i++) {
if (sc->rx_mbuf_map[i] != NULL) {
bus_dmamap_unload(sc->bnx_dmatag, sc->rx_mbuf_map[i]);
bus_dmamap_destroy(sc->bnx_dmatag, sc->rx_mbuf_map[i]);
}
}
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Allocate any DMA memory needed by the driver. */
/* */
/* Allocates DMA memory needed for the various global structures needed by */
/* hardware. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_dma_alloc(struct bnx_softc *sc)
{
int i, rc = 0;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/*
* Allocate DMA memory for the status block, map the memory into DMA
* space, and fetch the physical address of the block.
*/
if (bus_dmamap_create(sc->bnx_dmatag, BNX_STATUS_BLK_SZ, 1,
BNX_STATUS_BLK_SZ, 0, BUS_DMA_NOWAIT, &sc->status_map)) {
printf(": Could not create status block DMA map!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_alloc(sc->bnx_dmatag, BNX_STATUS_BLK_SZ,
BNX_DMA_ALIGN, BNX_DMA_BOUNDARY, &sc->status_seg, 1,
&sc->status_rseg, BUS_DMA_NOWAIT)) {
printf(": Could not allocate status block DMA memory!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_map(sc->bnx_dmatag, &sc->status_seg, sc->status_rseg,
BNX_STATUS_BLK_SZ, (caddr_t *)&sc->status_block, BUS_DMA_NOWAIT)) {
printf(": Could not map status block DMA memory!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamap_load(sc->bnx_dmatag, sc->status_map,
sc->status_block, BNX_STATUS_BLK_SZ, NULL, BUS_DMA_NOWAIT)) {
printf(": Could not load status block DMA memory!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
sc->status_block_paddr = sc->status_map->dm_segs[0].ds_addr;
bzero(sc->status_block, BNX_STATUS_BLK_SZ);
/* DRC - Fix for 64 bit addresses. */
DBPRINT(sc, BNX_INFO, "status_block_paddr = 0x%08X\n",
(u_int32_t) sc->status_block_paddr);
/*
* Allocate DMA memory for the statistics block, map the memory into
* DMA space, and fetch the physical address of the block.
*/
if (bus_dmamap_create(sc->bnx_dmatag, BNX_STATS_BLK_SZ, 1,
BNX_STATS_BLK_SZ, 0, BUS_DMA_NOWAIT, &sc->stats_map)) {
printf(": Could not create stats block DMA map!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_alloc(sc->bnx_dmatag, BNX_STATS_BLK_SZ,
BNX_DMA_ALIGN, BNX_DMA_BOUNDARY, &sc->stats_seg, 1,
&sc->stats_rseg, BUS_DMA_NOWAIT)) {
printf(": Could not allocate stats block DMA memory!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_map(sc->bnx_dmatag, &sc->stats_seg, sc->stats_rseg,
BNX_STATS_BLK_SZ, (caddr_t *)&sc->stats_block, BUS_DMA_NOWAIT)) {
printf(": Could not map stats block DMA memory!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamap_load(sc->bnx_dmatag, sc->stats_map,
sc->stats_block, BNX_STATS_BLK_SZ, NULL, BUS_DMA_NOWAIT)) {
printf(": Could not load status block DMA memory!\n");
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
sc->stats_block_paddr = sc->stats_map->dm_segs[0].ds_addr;
bzero(sc->stats_block, BNX_STATS_BLK_SZ);
/* DRC - Fix for 64 bit address. */
DBPRINT(sc,BNX_INFO, "stats_block_paddr = 0x%08X\n",
(u_int32_t) sc->stats_block_paddr);
/*
* Allocate DMA memory for the TX buffer descriptor chain,
* and fetch the physical address of the block.
*/
for (i = 0; i < TX_PAGES; i++) {
if (bus_dmamap_create(sc->bnx_dmatag, BNX_TX_CHAIN_PAGE_SZ, 1,
BNX_TX_CHAIN_PAGE_SZ, 0, BUS_DMA_NOWAIT,
&sc->tx_bd_chain_map[i])) {
printf(": Could not create Tx desc %d DMA map!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_alloc(sc->bnx_dmatag, BNX_TX_CHAIN_PAGE_SZ,
BCM_PAGE_SIZE, BNX_DMA_BOUNDARY, &sc->tx_bd_chain_seg[i], 1,
&sc->tx_bd_chain_rseg[i], BUS_DMA_NOWAIT)) {
printf(": Could not allocate TX desc %d DMA memory!\n",
i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_map(sc->bnx_dmatag, &sc->tx_bd_chain_seg[i],
sc->tx_bd_chain_rseg[i], BNX_TX_CHAIN_PAGE_SZ,
(caddr_t *)&sc->tx_bd_chain[i], BUS_DMA_NOWAIT)) {
printf(": Could not map TX desc %d DMA memory!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamap_load(sc->bnx_dmatag, sc->tx_bd_chain_map[i],
(caddr_t)sc->tx_bd_chain[i], BNX_TX_CHAIN_PAGE_SZ, NULL,
BUS_DMA_NOWAIT)) {
printf(": Could not load TX desc %d DMA memory!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
sc->tx_bd_chain_paddr[i] =
sc->tx_bd_chain_map[i]->dm_segs[0].ds_addr;
/* DRC - Fix for 64 bit systems. */
DBPRINT(sc, BNX_INFO, "tx_bd_chain_paddr[%d] = 0x%08X\n",
i, (u_int32_t) sc->tx_bd_chain_paddr[i]);
}
/*
* Create DMA maps for the TX buffer mbufs.
*/
for (i = 0; i < TOTAL_TX_BD; i++) {
if (bus_dmamap_create(sc->bnx_dmatag,
MCLBYTES * BNX_MAX_SEGMENTS,
USABLE_TX_BD - BNX_TX_SLACK_SPACE,
MCLBYTES, 0, BUS_DMA_NOWAIT,
&sc->tx_mbuf_map[i])) {
printf(": Could not create Tx mbuf %d DMA map!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
}
/*
* Allocate DMA memory for the Rx buffer descriptor chain,
* and fetch the physical address of the block.
*/
for (i = 0; i < RX_PAGES; i++) {
if (bus_dmamap_create(sc->bnx_dmatag, BNX_RX_CHAIN_PAGE_SZ, 1,
BNX_RX_CHAIN_PAGE_SZ, 0, BUS_DMA_NOWAIT,
&sc->rx_bd_chain_map[i])) {
printf(": Could not create Rx desc %d DMA map!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_alloc(sc->bnx_dmatag, BNX_RX_CHAIN_PAGE_SZ,
BCM_PAGE_SIZE, BNX_DMA_BOUNDARY, &sc->rx_bd_chain_seg[i], 1,
&sc->rx_bd_chain_rseg[i], BUS_DMA_NOWAIT)) {
printf(": Could not allocate Rx desc %d DMA memory!\n",
i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamem_map(sc->bnx_dmatag, &sc->rx_bd_chain_seg[i],
sc->rx_bd_chain_rseg[i], BNX_RX_CHAIN_PAGE_SZ,
(caddr_t *)&sc->rx_bd_chain[i], BUS_DMA_NOWAIT)) {
printf(": Could not map Rx desc %d DMA memory!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
if (bus_dmamap_load(sc->bnx_dmatag, sc->rx_bd_chain_map[i],
(caddr_t)sc->rx_bd_chain[i], BNX_RX_CHAIN_PAGE_SZ, NULL,
BUS_DMA_NOWAIT)) {
printf(": Could not load Rx desc %d DMA memory!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
bzero(sc->rx_bd_chain[i], BNX_RX_CHAIN_PAGE_SZ);
sc->rx_bd_chain_paddr[i] =
sc->rx_bd_chain_map[i]->dm_segs[0].ds_addr;
/* DRC - Fix for 64 bit systems. */
DBPRINT(sc, BNX_INFO, "rx_bd_chain_paddr[%d] = 0x%08X\n",
i, (u_int32_t) sc->rx_bd_chain_paddr[i]);
}
/*
* Create DMA maps for the Rx buffer mbufs.
*/
for (i = 0; i < TOTAL_RX_BD; i++) {
if (bus_dmamap_create(sc->bnx_dmatag, BNX_MAX_MRU,
BNX_MAX_SEGMENTS, BNX_MAX_MRU, 0, BUS_DMA_NOWAIT,
&sc->rx_mbuf_map[i])) {
printf(": Could not create Rx mbuf %d DMA map!\n", i);
rc = ENOMEM;
goto bnx_dma_alloc_exit;
}
}
bnx_dma_alloc_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Release all resources used by the driver. */
/* */
/* Releases all resources acquired by the driver including interrupts, */
/* interrupt handler, interfaces, mutexes, and DMA memory. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_release_resources(struct bnx_softc *sc)
{
struct pci_attach_args *pa = &(sc->bnx_pa);
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
bnx_dma_free(sc);
if (sc->bnx_intrhand != NULL)
pci_intr_disestablish(pa->pa_pc, sc->bnx_intrhand);
if (sc->bnx_size)
bus_space_unmap(sc->bnx_btag, sc->bnx_bhandle, sc->bnx_size);
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Firmware synchronization. */
/* */
/* Before performing certain events such as a chip reset, synchronize with */
/* the firmware first. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_fw_sync(struct bnx_softc *sc, u_int32_t msg_data)
{
int i, rc = 0;
u_int32_t val;
/* Don't waste any time if we've timed out before. */
if (sc->bnx_fw_timed_out) {
rc = EBUSY;
goto bnx_fw_sync_exit;
}
/* Increment the message sequence number. */
sc->bnx_fw_wr_seq++;
msg_data |= sc->bnx_fw_wr_seq;
DBPRINT(sc, BNX_VERBOSE, "bnx_fw_sync(): msg_data = 0x%08X\n",
msg_data);
/* Send the message to the bootcode driver mailbox. */
REG_WR_IND(sc, sc->bnx_shmem_base + BNX_DRV_MB, msg_data);
/* Wait for the bootcode to acknowledge the message. */
for (i = 0; i < FW_ACK_TIME_OUT_MS; i++) {
/* Check for a response in the bootcode firmware mailbox. */
val = REG_RD_IND(sc, sc->bnx_shmem_base + BNX_FW_MB);
if ((val & BNX_FW_MSG_ACK) == (msg_data & BNX_DRV_MSG_SEQ))
break;
DELAY(1000);
}
/* If we've timed out, tell the bootcode that we've stopped waiting. */
if (((val & BNX_FW_MSG_ACK) != (msg_data & BNX_DRV_MSG_SEQ)) &&
((msg_data & BNX_DRV_MSG_DATA) != BNX_DRV_MSG_DATA_WAIT0)) {
BNX_PRINTF(sc, "%s(%d): Firmware synchronization timeout! "
"msg_data = 0x%08X\n", __FILE__, __LINE__, msg_data);
msg_data &= ~BNX_DRV_MSG_CODE;
msg_data |= BNX_DRV_MSG_CODE_FW_TIMEOUT;
REG_WR_IND(sc, sc->bnx_shmem_base + BNX_DRV_MB, msg_data);
sc->bnx_fw_timed_out = 1;
rc = EBUSY;
}
bnx_fw_sync_exit:
return (rc);
}
/****************************************************************************/
/* Load Receive Virtual 2 Physical (RV2P) processor firmware. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_load_rv2p_fw(struct bnx_softc *sc, u_int32_t *rv2p_code,
u_int32_t rv2p_code_len, u_int32_t rv2p_proc)
{
int i;
u_int32_t val;
for (i = 0; i < rv2p_code_len; i += 8) {
REG_WR(sc, BNX_RV2P_INSTR_HIGH, *rv2p_code);
rv2p_code++;
REG_WR(sc, BNX_RV2P_INSTR_LOW, *rv2p_code);
rv2p_code++;
if (rv2p_proc == RV2P_PROC1) {
val = (i / 8) | BNX_RV2P_PROC1_ADDR_CMD_RDWR;
REG_WR(sc, BNX_RV2P_PROC1_ADDR_CMD, val);
}
else {
val = (i / 8) | BNX_RV2P_PROC2_ADDR_CMD_RDWR;
REG_WR(sc, BNX_RV2P_PROC2_ADDR_CMD, val);
}
}
/* Reset the processor, un-stall is done later. */
if (rv2p_proc == RV2P_PROC1)
REG_WR(sc, BNX_RV2P_COMMAND, BNX_RV2P_COMMAND_PROC1_RESET);
else
REG_WR(sc, BNX_RV2P_COMMAND, BNX_RV2P_COMMAND_PROC2_RESET);
}
/****************************************************************************/
/* Load RISC processor firmware. */
/* */
/* Loads firmware from the file if_bnxfw.h into the scratchpad memory */
/* associated with a particular processor. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_load_cpu_fw(struct bnx_softc *sc, struct cpu_reg *cpu_reg,
struct fw_info *fw)
{
u_int32_t offset;
u_int32_t val;
/* Halt the CPU. */
val = REG_RD_IND(sc, cpu_reg->mode);
val |= cpu_reg->mode_value_halt;
REG_WR_IND(sc, cpu_reg->mode, val);
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
/* Load the Text area. */
offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base);
if (fw->text) {
int j;
for (j = 0; j < (fw->text_len / 4); j++, offset += 4)
REG_WR_IND(sc, offset, fw->text[j]);
}
/* Load the Data area. */
offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base);
if (fw->data) {
int j;
for (j = 0; j < (fw->data_len / 4); j++, offset += 4)
REG_WR_IND(sc, offset, fw->data[j]);
}
/* Load the SBSS area. */
offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base);
if (fw->sbss) {
int j;
for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4)
REG_WR_IND(sc, offset, fw->sbss[j]);
}
/* Load the BSS area. */
offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base);
if (fw->bss) {
int j;
for (j = 0; j < (fw->bss_len/4); j++, offset += 4)
REG_WR_IND(sc, offset, fw->bss[j]);
}
/* Load the Read-Only area. */
offset = cpu_reg->spad_base +
(fw->rodata_addr - cpu_reg->mips_view_base);
if (fw->rodata) {
int j;
for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4)
REG_WR_IND(sc, offset, fw->rodata[j]);
}
/* Clear the pre-fetch instruction. */
REG_WR_IND(sc, cpu_reg->inst, 0);
REG_WR_IND(sc, cpu_reg->pc, fw->start_addr);
/* Start the CPU. */
val = REG_RD_IND(sc, cpu_reg->mode);
val &= ~cpu_reg->mode_value_halt;
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
REG_WR_IND(sc, cpu_reg->mode, val);
}
/****************************************************************************/
/* Initialize the RV2P, RX, TX, TPAT, and COM CPUs. */
/* */
/* Loads the firmware for each CPU and starts the CPU. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_init_cpus(struct bnx_softc *sc)
{
struct cpu_reg cpu_reg;
struct fw_info fw;
/* Initialize the RV2P processor. */
bnx_load_rv2p_fw(sc, bnx_rv2p_proc1, bnx_rv2p_proc1len,
RV2P_PROC1);
bnx_load_rv2p_fw(sc, bnx_rv2p_proc2, bnx_rv2p_proc2len,
RV2P_PROC2);
/* Initialize the RX Processor. */
cpu_reg.mode = BNX_RXP_CPU_MODE;
cpu_reg.mode_value_halt = BNX_RXP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX_RXP_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX_RXP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX_RXP_CPU_REG_FILE;
cpu_reg.evmask = BNX_RXP_CPU_EVENT_MASK;
cpu_reg.pc = BNX_RXP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX_RXP_CPU_INSTRUCTION;
cpu_reg.bp = BNX_RXP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX_RXP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bnx_RXP_b06FwReleaseMajor;
fw.ver_minor = bnx_RXP_b06FwReleaseMinor;
fw.ver_fix = bnx_RXP_b06FwReleaseFix;
fw.start_addr = bnx_RXP_b06FwStartAddr;
fw.text_addr = bnx_RXP_b06FwTextAddr;
fw.text_len = bnx_RXP_b06FwTextLen;
fw.text_index = 0;
fw.text = bnx_RXP_b06FwText;
fw.data_addr = bnx_RXP_b06FwDataAddr;
fw.data_len = bnx_RXP_b06FwDataLen;
fw.data_index = 0;
fw.data = bnx_RXP_b06FwData;
fw.sbss_addr = bnx_RXP_b06FwSbssAddr;
fw.sbss_len = bnx_RXP_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bnx_RXP_b06FwSbss;
fw.bss_addr = bnx_RXP_b06FwBssAddr;
fw.bss_len = bnx_RXP_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bnx_RXP_b06FwBss;
fw.rodata_addr = bnx_RXP_b06FwRodataAddr;
fw.rodata_len = bnx_RXP_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bnx_RXP_b06FwRodata;
DBPRINT(sc, BNX_INFO_RESET, "Loading RX firmware.\n");
bnx_load_cpu_fw(sc, &cpu_reg, &fw);
/* Initialize the TX Processor. */
cpu_reg.mode = BNX_TXP_CPU_MODE;
cpu_reg.mode_value_halt = BNX_TXP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX_TXP_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX_TXP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX_TXP_CPU_REG_FILE;
cpu_reg.evmask = BNX_TXP_CPU_EVENT_MASK;
cpu_reg.pc = BNX_TXP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX_TXP_CPU_INSTRUCTION;
cpu_reg.bp = BNX_TXP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX_TXP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bnx_TXP_b06FwReleaseMajor;
fw.ver_minor = bnx_TXP_b06FwReleaseMinor;
fw.ver_fix = bnx_TXP_b06FwReleaseFix;
fw.start_addr = bnx_TXP_b06FwStartAddr;
fw.text_addr = bnx_TXP_b06FwTextAddr;
fw.text_len = bnx_TXP_b06FwTextLen;
fw.text_index = 0;
fw.text = bnx_TXP_b06FwText;
fw.data_addr = bnx_TXP_b06FwDataAddr;
fw.data_len = bnx_TXP_b06FwDataLen;
fw.data_index = 0;
fw.data = bnx_TXP_b06FwData;
fw.sbss_addr = bnx_TXP_b06FwSbssAddr;
fw.sbss_len = bnx_TXP_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bnx_TXP_b06FwSbss;
fw.bss_addr = bnx_TXP_b06FwBssAddr;
fw.bss_len = bnx_TXP_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bnx_TXP_b06FwBss;
fw.rodata_addr = bnx_TXP_b06FwRodataAddr;
fw.rodata_len = bnx_TXP_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bnx_TXP_b06FwRodata;
DBPRINT(sc, BNX_INFO_RESET, "Loading TX firmware.\n");
bnx_load_cpu_fw(sc, &cpu_reg, &fw);
/* Initialize the TX Patch-up Processor. */
cpu_reg.mode = BNX_TPAT_CPU_MODE;
cpu_reg.mode_value_halt = BNX_TPAT_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX_TPAT_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX_TPAT_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX_TPAT_CPU_REG_FILE;
cpu_reg.evmask = BNX_TPAT_CPU_EVENT_MASK;
cpu_reg.pc = BNX_TPAT_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX_TPAT_CPU_INSTRUCTION;
cpu_reg.bp = BNX_TPAT_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX_TPAT_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bnx_TPAT_b06FwReleaseMajor;
fw.ver_minor = bnx_TPAT_b06FwReleaseMinor;
fw.ver_fix = bnx_TPAT_b06FwReleaseFix;
fw.start_addr = bnx_TPAT_b06FwStartAddr;
fw.text_addr = bnx_TPAT_b06FwTextAddr;
fw.text_len = bnx_TPAT_b06FwTextLen;
fw.text_index = 0;
fw.text = bnx_TPAT_b06FwText;
fw.data_addr = bnx_TPAT_b06FwDataAddr;
fw.data_len = bnx_TPAT_b06FwDataLen;
fw.data_index = 0;
fw.data = bnx_TPAT_b06FwData;
fw.sbss_addr = bnx_TPAT_b06FwSbssAddr;
fw.sbss_len = bnx_TPAT_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bnx_TPAT_b06FwSbss;
fw.bss_addr = bnx_TPAT_b06FwBssAddr;
fw.bss_len = bnx_TPAT_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bnx_TPAT_b06FwBss;
fw.rodata_addr = bnx_TPAT_b06FwRodataAddr;
fw.rodata_len = bnx_TPAT_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bnx_TPAT_b06FwRodata;
DBPRINT(sc, BNX_INFO_RESET, "Loading TPAT firmware.\n");
bnx_load_cpu_fw(sc, &cpu_reg, &fw);
/* Initialize the Completion Processor. */
cpu_reg.mode = BNX_COM_CPU_MODE;
cpu_reg.mode_value_halt = BNX_COM_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX_COM_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX_COM_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX_COM_CPU_REG_FILE;
cpu_reg.evmask = BNX_COM_CPU_EVENT_MASK;
cpu_reg.pc = BNX_COM_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX_COM_CPU_INSTRUCTION;
cpu_reg.bp = BNX_COM_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX_COM_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bnx_COM_b06FwReleaseMajor;
fw.ver_minor = bnx_COM_b06FwReleaseMinor;
fw.ver_fix = bnx_COM_b06FwReleaseFix;
fw.start_addr = bnx_COM_b06FwStartAddr;
fw.text_addr = bnx_COM_b06FwTextAddr;
fw.text_len = bnx_COM_b06FwTextLen;
fw.text_index = 0;
fw.text = bnx_COM_b06FwText;
fw.data_addr = bnx_COM_b06FwDataAddr;
fw.data_len = bnx_COM_b06FwDataLen;
fw.data_index = 0;
fw.data = bnx_COM_b06FwData;
fw.sbss_addr = bnx_COM_b06FwSbssAddr;
fw.sbss_len = bnx_COM_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bnx_COM_b06FwSbss;
fw.bss_addr = bnx_COM_b06FwBssAddr;
fw.bss_len = bnx_COM_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bnx_COM_b06FwBss;
fw.rodata_addr = bnx_COM_b06FwRodataAddr;
fw.rodata_len = bnx_COM_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bnx_COM_b06FwRodata;
DBPRINT(sc, BNX_INFO_RESET, "Loading COM firmware.\n");
bnx_load_cpu_fw(sc, &cpu_reg, &fw);
}
/****************************************************************************/
/* Initialize context memory. */
/* */
/* Clears the memory associated with each Context ID (CID). */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_init_context(struct bnx_softc *sc)
{
u_int32_t vcid;
vcid = 96;
while (vcid) {
u_int32_t vcid_addr, pcid_addr, offset;
vcid--;
vcid_addr = GET_CID_ADDR(vcid);
pcid_addr = vcid_addr;
REG_WR(sc, BNX_CTX_VIRT_ADDR, 0x00);
REG_WR(sc, BNX_CTX_PAGE_TBL, pcid_addr);
/* Zero out the context. */
for (offset = 0; offset < PHY_CTX_SIZE; offset += 4)
CTX_WR(sc, 0x00, offset, 0);
REG_WR(sc, BNX_CTX_VIRT_ADDR, vcid_addr);
REG_WR(sc, BNX_CTX_PAGE_TBL, pcid_addr);
}
}
/****************************************************************************/
/* Fetch the permanent MAC address of the controller. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_get_mac_addr(struct bnx_softc *sc)
{
u_int32_t mac_lo = 0, mac_hi = 0;
/*
* The NetXtreme II bootcode populates various NIC
* power-on and runtime configuration items in a
* shared memory area. The factory configured MAC
* address is available from both NVRAM and the
* shared memory area so we'll read the value from
* shared memory for speed.
*/
mac_hi = REG_RD_IND(sc, sc->bnx_shmem_base + BNX_PORT_HW_CFG_MAC_UPPER);
mac_lo = REG_RD_IND(sc, sc->bnx_shmem_base + BNX_PORT_HW_CFG_MAC_LOWER);
if ((mac_lo == 0) && (mac_hi == 0)) {
BNX_PRINTF(sc, "%s(%d): Invalid Ethernet address!\n",
__FILE__, __LINE__);
} else {
sc->eaddr[0] = (u_char)(mac_hi >> 8);
sc->eaddr[1] = (u_char)(mac_hi >> 0);
sc->eaddr[2] = (u_char)(mac_lo >> 24);
sc->eaddr[3] = (u_char)(mac_lo >> 16);
sc->eaddr[4] = (u_char)(mac_lo >> 8);
sc->eaddr[5] = (u_char)(mac_lo >> 0);
}
DBPRINT(sc, BNX_INFO, "Permanent Ethernet address = "
"%6D\n", sc->eaddr, ":");
}
/****************************************************************************/
/* Program the MAC address. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_set_mac_addr(struct bnx_softc *sc)
{
u_int32_t val;
u_int8_t *mac_addr = sc->eaddr;
DBPRINT(sc, BNX_INFO, "Setting Ethernet address = "
"%6D\n", sc->eaddr, ":");
val = (mac_addr[0] << 8) | mac_addr[1];
REG_WR(sc, BNX_EMAC_MAC_MATCH0, val);
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
(mac_addr[4] << 8) | mac_addr[5];
REG_WR(sc, BNX_EMAC_MAC_MATCH1, val);
}
/****************************************************************************/
/* Stop the controller. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_stop(struct bnx_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mii_data *mii = NULL;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
mii = &sc->bnx_mii;
timeout_del(&sc->bnx_timeout);
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
/* Disable the transmit/receive blocks. */
REG_WR(sc, BNX_MISC_ENABLE_CLR_BITS, 0x5ffffff);
REG_RD(sc, BNX_MISC_ENABLE_CLR_BITS);
DELAY(20);
bnx_disable_intr(sc);
/* Tell firmware that the driver is going away. */
bnx_reset(sc, BNX_DRV_MSG_CODE_SUSPEND_NO_WOL);
/* Free the RX lists. */
bnx_free_rx_chain(sc);
/* Free TX buffers. */
bnx_free_tx_chain(sc);
ifp->if_timer = 0;
sc->bnx_link = 0;
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
bnx_mgmt_init(sc);
}
int
bnx_reset(struct bnx_softc *sc, u_int32_t reset_code)
{
u_int32_t val;
int i, rc = 0;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Wait for pending PCI transactions to complete. */
REG_WR(sc, BNX_MISC_ENABLE_CLR_BITS,
BNX_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
BNX_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
BNX_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
BNX_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
val = REG_RD(sc, BNX_MISC_ENABLE_CLR_BITS);
DELAY(5);
/* Assume bootcode is running. */
sc->bnx_fw_timed_out = 0;
/* Give the firmware a chance to prepare for the reset. */
rc = bnx_fw_sync(sc, BNX_DRV_MSG_DATA_WAIT0 | reset_code);
if (rc)
goto bnx_reset_exit;
/* Set a firmware reminder that this is a soft reset. */
REG_WR_IND(sc, sc->bnx_shmem_base + BNX_DRV_RESET_SIGNATURE,
BNX_DRV_RESET_SIGNATURE_MAGIC);
/* Dummy read to force the chip to complete all current transactions. */
val = REG_RD(sc, BNX_MISC_ID);
/* Chip reset. */
val = BNX_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BNX_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BNX_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
REG_WR(sc, BNX_PCICFG_MISC_CONFIG, val);
/* Allow up to 30us for reset to complete. */
for (i = 0; i < 10; i++) {
val = REG_RD(sc, BNX_PCICFG_MISC_CONFIG);
if ((val & (BNX_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BNX_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0)
break;
DELAY(10);
}
/* Check that reset completed successfully. */
if (val & (BNX_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BNX_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
BNX_PRINTF(sc, "%s(%d): Reset failed!\n", __FILE__, __LINE__);
rc = EBUSY;
goto bnx_reset_exit;
}
/* Make sure byte swapping is properly configured. */
val = REG_RD(sc, BNX_PCI_SWAP_DIAG0);
if (val != 0x01020304) {
BNX_PRINTF(sc, "%s(%d): Byte swap is incorrect!\n",
__FILE__, __LINE__);
rc = ENODEV;
goto bnx_reset_exit;
}
/* Just completed a reset, assume that firmware is running again. */
sc->bnx_fw_timed_out = 0;
/* Wait for the firmware to finish its initialization. */
rc = bnx_fw_sync(sc, BNX_DRV_MSG_DATA_WAIT1 | reset_code);
if (rc)
BNX_PRINTF(sc, "%s(%d): Firmware did not complete "
"initialization!\n", __FILE__, __LINE__);
bnx_reset_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return (rc);
}
int
bnx_chipinit(struct bnx_softc *sc)
{
struct pci_attach_args *pa = &(sc->bnx_pa);
u_int32_t val;
int rc = 0;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Make sure the interrupt is not active. */
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD, BNX_PCICFG_INT_ACK_CMD_MASK_INT);
/* Initialize DMA byte/word swapping, configure the number of DMA */
/* channels and PCI clock compensation delay. */
val = BNX_DMA_CONFIG_DATA_BYTE_SWAP |
BNX_DMA_CONFIG_DATA_WORD_SWAP |
#if BYTE_ORDER == BIG_ENDIAN
BNX_DMA_CONFIG_CNTL_BYTE_SWAP |
#endif
BNX_DMA_CONFIG_CNTL_WORD_SWAP |
DMA_READ_CHANS << 12 |
DMA_WRITE_CHANS << 16;
val |= (0x2 << 20) | BNX_DMA_CONFIG_CNTL_PCI_COMP_DLY;
if ((sc->bnx_flags & BNX_PCIX_FLAG) && (sc->bus_speed_mhz == 133))
val |= BNX_DMA_CONFIG_PCI_FAST_CLK_CMP;
/*
* This setting resolves a problem observed on certain Intel PCI
* chipsets that cannot handle multiple outstanding DMA operations.
* See errata E9_5706A1_65.
*/
if ((BNX_CHIP_NUM(sc) == BNX_CHIP_NUM_5706) &&
(BNX_CHIP_ID(sc) != BNX_CHIP_ID_5706_A0) &&
!(sc->bnx_flags & BNX_PCIX_FLAG))
val |= BNX_DMA_CONFIG_CNTL_PING_PONG_DMA;
REG_WR(sc, BNX_DMA_CONFIG, val);
/* Clear the PCI-X relaxed ordering bit. See errata E3_5708CA0_570. */
if (sc->bnx_flags & BNX_PCIX_FLAG) {
u_int16_t val;
val = pci_conf_read(pa->pa_pc, pa->pa_tag, BNX_PCI_PCIX_CMD);
pci_conf_write(pa->pa_pc, pa->pa_tag, BNX_PCI_PCIX_CMD,
val & ~0x2);
}
/* Enable the RX_V2P and Context state machines before access. */
REG_WR(sc, BNX_MISC_ENABLE_SET_BITS,
BNX_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE |
BNX_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE |
BNX_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE);
/* Initialize context mapping and zero out the quick contexts. */
bnx_init_context(sc);
/* Initialize the on-boards CPUs */
bnx_init_cpus(sc);
/* Prepare NVRAM for access. */
if (bnx_init_nvram(sc)) {
rc = ENODEV;
goto bnx_chipinit_exit;
}
/* Set the kernel bypass block size */
val = REG_RD(sc, BNX_MQ_CONFIG);
val &= ~BNX_MQ_CONFIG_KNL_BYP_BLK_SIZE;
val |= BNX_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
REG_WR(sc, BNX_MQ_CONFIG, val);
val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE);
REG_WR(sc, BNX_MQ_KNL_BYP_WIND_START, val);
REG_WR(sc, BNX_MQ_KNL_WIND_END, val);
val = (BCM_PAGE_BITS - 8) << 24;
REG_WR(sc, BNX_RV2P_CONFIG, val);
/* Configure page size. */
val = REG_RD(sc, BNX_TBDR_CONFIG);
val &= ~BNX_TBDR_CONFIG_PAGE_SIZE;
val |= (BCM_PAGE_BITS - 8) << 24 | 0x40;
REG_WR(sc, BNX_TBDR_CONFIG, val);
bnx_chipinit_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Initialize the controller in preparation to send/receive traffic. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_blockinit(struct bnx_softc *sc)
{
u_int32_t reg, val;
int rc = 0;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Load the hardware default MAC address. */
bnx_set_mac_addr(sc);
/* Set the Ethernet backoff seed value */
val = sc->eaddr[0] + (sc->eaddr[1] << 8) + (sc->eaddr[2] << 16) +
(sc->eaddr[3]) + (sc->eaddr[4] << 8) + (sc->eaddr[5] << 16);
REG_WR(sc, BNX_EMAC_BACKOFF_SEED, val);
sc->last_status_idx = 0;
sc->rx_mode = BNX_EMAC_RX_MODE_SORT_MODE;
/* Set up link change interrupt generation. */
REG_WR(sc, BNX_EMAC_ATTENTION_ENA, BNX_EMAC_ATTENTION_ENA_LINK);
/* Program the physical address of the status block. */
REG_WR(sc, BNX_HC_STATUS_ADDR_L, (u_int32_t)(sc->status_block_paddr));
REG_WR(sc, BNX_HC_STATUS_ADDR_H,
(u_int32_t)((u_int64_t)sc->status_block_paddr >> 32));
/* Program the physical address of the statistics block. */
REG_WR(sc, BNX_HC_STATISTICS_ADDR_L,
(u_int32_t)(sc->stats_block_paddr));
REG_WR(sc, BNX_HC_STATISTICS_ADDR_H,
(u_int32_t)((u_int64_t)sc->stats_block_paddr >> 32));
/* Program various host coalescing parameters. */
REG_WR(sc, BNX_HC_TX_QUICK_CONS_TRIP, (sc->bnx_tx_quick_cons_trip_int
<< 16) | sc->bnx_tx_quick_cons_trip);
REG_WR(sc, BNX_HC_RX_QUICK_CONS_TRIP, (sc->bnx_rx_quick_cons_trip_int
<< 16) | sc->bnx_rx_quick_cons_trip);
REG_WR(sc, BNX_HC_COMP_PROD_TRIP, (sc->bnx_comp_prod_trip_int << 16) |
sc->bnx_comp_prod_trip);
REG_WR(sc, BNX_HC_TX_TICKS, (sc->bnx_tx_ticks_int << 16) |
sc->bnx_tx_ticks);
REG_WR(sc, BNX_HC_RX_TICKS, (sc->bnx_rx_ticks_int << 16) |
sc->bnx_rx_ticks);
REG_WR(sc, BNX_HC_COM_TICKS, (sc->bnx_com_ticks_int << 16) |
sc->bnx_com_ticks);
REG_WR(sc, BNX_HC_CMD_TICKS, (sc->bnx_cmd_ticks_int << 16) |
sc->bnx_cmd_ticks);
REG_WR(sc, BNX_HC_STATS_TICKS, (sc->bnx_stats_ticks & 0xffff00));
REG_WR(sc, BNX_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */
REG_WR(sc, BNX_HC_CONFIG,
(BNX_HC_CONFIG_RX_TMR_MODE | BNX_HC_CONFIG_TX_TMR_MODE |
BNX_HC_CONFIG_COLLECT_STATS));
/* Clear the internal statistics counters. */
REG_WR(sc, BNX_HC_COMMAND, BNX_HC_COMMAND_CLR_STAT_NOW);
/* Verify that bootcode is running. */
reg = REG_RD_IND(sc, sc->bnx_shmem_base + BNX_DEV_INFO_SIGNATURE);
DBRUNIF(DB_RANDOMTRUE(bnx_debug_bootcode_running_failure),
BNX_PRINTF(sc, "%s(%d): Simulating bootcode failure.\n",
__FILE__, __LINE__); reg = 0);
if ((reg & BNX_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
BNX_DEV_INFO_SIGNATURE_MAGIC) {
BNX_PRINTF(sc, "%s(%d): Bootcode not running! Found: 0x%08X, "
"Expected: 08%08X\n", __FILE__, __LINE__,
(reg & BNX_DEV_INFO_SIGNATURE_MAGIC_MASK),
BNX_DEV_INFO_SIGNATURE_MAGIC);
rc = ENODEV;
goto bnx_blockinit_exit;
}
/* Check if any management firmware is running. */
reg = REG_RD_IND(sc, sc->bnx_shmem_base + BNX_PORT_FEATURE);
if (reg & (BNX_PORT_FEATURE_ASF_ENABLED |
BNX_PORT_FEATURE_IMD_ENABLED)) {
DBPRINT(sc, BNX_INFO, "Management F/W Enabled.\n");
sc->bnx_flags |= BNX_MFW_ENABLE_FLAG;
}
sc->bnx_fw_ver = REG_RD_IND(sc, sc->bnx_shmem_base +
BNX_DEV_INFO_BC_REV);
DBPRINT(sc, BNX_INFO, "bootcode rev = 0x%08X\n", sc->bnx_fw_ver);
/* Allow bootcode to apply any additional fixes before enabling MAC. */
rc = bnx_fw_sync(sc, BNX_DRV_MSG_DATA_WAIT2 | BNX_DRV_MSG_CODE_RESET);
/* Enable link state change interrupt generation. */
REG_WR(sc, BNX_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
/* Enable all remaining blocks in the MAC. */
REG_WR(sc, BNX_MISC_ENABLE_SET_BITS, 0x5ffffff);
REG_RD(sc, BNX_MISC_ENABLE_SET_BITS);
DELAY(20);
bnx_blockinit_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return (rc);
}
/****************************************************************************/
/* Encapsulate an mbuf cluster into the rx_bd chain. */
/* */
/* The NetXtreme II can support Jumbo frames by using multiple rx_bd's. */
/* This routine will map an mbuf cluster into 1 or more rx_bd's as */
/* necessary. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_get_buf(struct bnx_softc *sc, struct mbuf *m, u_int16_t *prod,
u_int16_t *chain_prod, u_int32_t *prod_bseq)
{
bus_dmamap_t map;
struct mbuf *m_new = NULL;
struct rx_bd *rxbd;
int i, rc = 0;
u_int32_t addr;
#ifdef BNX_DEBUG
u_int16_t debug_chain_prod = *chain_prod;
#endif
u_int16_t first_chain_prod;
DBPRINT(sc, (BNX_VERBOSE_RESET | BNX_VERBOSE_RECV), "Entering %s()\n",
__FUNCTION__);
/* Make sure the inputs are valid. */
DBRUNIF((*chain_prod > MAX_RX_BD),
printf("%s: RX producer out of range: 0x%04X > 0x%04X\n",
*chain_prod, (u_int16_t) MAX_RX_BD));
DBPRINT(sc, BNX_VERBOSE_RECV, "%s(enter): prod = 0x%04X, chain_prod = "
"0x%04X, prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod,
*prod_bseq);
if (m == NULL) {
DBRUNIF(DB_RANDOMTRUE(bnx_debug_mbuf_allocation_failure),
BNX_PRINTF(sc, "Simulating mbuf allocation failure.\n");
sc->mbuf_alloc_failed++;
rc = ENOBUFS;
goto bnx_get_buf_exit);
/* This is a new mbuf allocation. */
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
DBPRINT(sc, BNX_WARN,
"%s(%d): RX mbuf header allocation failed!\n",
__FILE__, __LINE__);
DBRUNIF(1, sc->mbuf_alloc_failed++);
rc = ENOBUFS;
goto bnx_get_buf_exit;
}
DBRUNIF(1, sc->rx_mbuf_alloc++);
MCLGET(m_new, M_DONTWAIT);
if (!(m_new->m_flags & M_EXT)) {
DBPRINT(sc, BNX_WARN,
"%s(%d): RX mbuf chain allocation failed!\n",
__FILE__, __LINE__);
m_freem(m_new);
DBRUNIF(1, sc->rx_mbuf_alloc--);
DBRUNIF(1, sc->mbuf_alloc_failed++);
rc = ENOBUFS;
goto bnx_get_buf_exit;
}
m_new->m_len = m_new->m_pkthdr.len = sc->mbuf_alloc_size;
} else {
m_new = m;
m_new->m_len = m_new->m_pkthdr.len = sc->mbuf_alloc_size;
m_new->m_data = m_new->m_ext.ext_buf;
}
/* Map the mbuf cluster into device memory. */
map = sc->rx_mbuf_map[*chain_prod];
first_chain_prod = *chain_prod;
if (bus_dmamap_load_mbuf(sc->bnx_dmatag, map, m_new, BUS_DMA_NOWAIT)) {
BNX_PRINTF(sc, "%s(%d): Error mapping mbuf into RX chain!\n",
__FILE__, __LINE__);
m_freem(m_new);
DBRUNIF(1, sc->rx_mbuf_alloc--);
rc = ENOBUFS;
goto bnx_get_buf_exit;
}
/* Watch for overflow. */
DBRUNIF((sc->free_rx_bd > USABLE_RX_BD),
printf("%s: Too many free rx_bd (0x%04X > 0x%04X)!\n",
sc->free_rx_bd, (u_int16_t) USABLE_RX_BD));
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
sc->rx_low_watermark = sc->free_rx_bd);
/* Setup the rx_bd for the first segment. */
rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)];
addr = (u_int32_t)(map->dm_segs[0].ds_addr);
rxbd->rx_bd_haddr_lo = htole32(addr);
addr = (u_int32_t)((u_int64_t)map->dm_segs[0].ds_addr >> 32);
rxbd->rx_bd_haddr_hi = htole32(addr);
rxbd->rx_bd_len = htole32(map->dm_segs[0].ds_len);
rxbd->rx_bd_flags = htole32(RX_BD_FLAGS_START);
*prod_bseq += map->dm_segs[0].ds_len;
for (i = 1; i < map->dm_nsegs; i++) {
*prod = NEXT_RX_BD(*prod);
*chain_prod = RX_CHAIN_IDX(*prod);
rxbd =
&sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)];
addr = (u_int32_t)(map->dm_segs[i].ds_addr);
rxbd->rx_bd_haddr_lo = htole32(addr);
addr = (u_int32_t)((u_int64_t)map->dm_segs[i].ds_addr >> 32);
rxbd->rx_bd_haddr_hi = htole32(addr);
rxbd->rx_bd_len = htole32(map->dm_segs[i].ds_len);
rxbd->rx_bd_flags = 0;
*prod_bseq += map->dm_segs[i].ds_len;
}
rxbd->rx_bd_flags |= htole32(RX_BD_FLAGS_END);
/*
* Save the mbuf, adjust the map pointer (swap map for first and
* last rx_bd entry so that rx_mbuf_ptr and rx_mbuf_map matches)
* and update our counter.
*/
sc->rx_mbuf_ptr[*chain_prod] = m_new;
sc->rx_mbuf_map[first_chain_prod] = sc->rx_mbuf_map[*chain_prod];
sc->rx_mbuf_map[*chain_prod] = map;
sc->free_rx_bd -= map->dm_nsegs;
DBRUN(BNX_VERBOSE_RECV, bnx_dump_rx_mbuf_chain(sc, debug_chain_prod,
map->dm_nsegs));
DBPRINT(sc, BNX_VERBOSE_RECV, "%s(exit): prod = 0x%04X, chain_prod "
"= 0x%04X, prod_bseq = 0x%08X\n", __FUNCTION__, *prod,
*chain_prod, *prod_bseq);
bnx_get_buf_exit:
DBPRINT(sc, (BNX_VERBOSE_RESET | BNX_VERBOSE_RECV), "Exiting %s()\n",
__FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Allocate memory and initialize the TX data structures. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_init_tx_chain(struct bnx_softc *sc)
{
struct tx_bd *txbd;
u_int32_t val, addr;
int i, rc = 0;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Set the initial TX producer/consumer indices. */
sc->tx_prod = 0;
sc->tx_cons = 0;
sc->tx_prod_bseq = 0;
sc->used_tx_bd = 0;
DBRUNIF(1, sc->tx_hi_watermark = USABLE_TX_BD);
/*
* The NetXtreme II supports a linked-list structure called
* a Buffer Descriptor Chain (or BD chain). A BD chain
* consists of a series of 1 or more chain pages, each of which
* consists of a fixed number of BD entries.
* The last BD entry on each page is a pointer to the next page
* in the chain, and the last pointer in the BD chain
* points back to the beginning of the chain.
*/
/* Set the TX next pointer chain entries. */
for (i = 0; i < TX_PAGES; i++) {
int j;
txbd = &sc->tx_bd_chain[i][USABLE_TX_BD_PER_PAGE];
/* Check if we've reached the last page. */
if (i == (TX_PAGES - 1))
j = 0;
else
j = i + 1;
addr = (u_int32_t)(sc->tx_bd_chain_paddr[j]);
txbd->tx_bd_haddr_lo = htole32(addr);
addr = (u_int32_t)((u_int64_t)sc->tx_bd_chain_paddr[j] >> 32);
txbd->tx_bd_haddr_hi = htole32(addr);
}
/*
* Initialize the context ID for an L2 TX chain.
*/
val = BNX_L2CTX_TYPE_TYPE_L2;
val |= BNX_L2CTX_TYPE_SIZE_L2;
CTX_WR(sc, GET_CID_ADDR(TX_CID), BNX_L2CTX_TYPE, val);
val = BNX_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16);
CTX_WR(sc, GET_CID_ADDR(TX_CID), BNX_L2CTX_CMD_TYPE, val);
/* Point the hardware to the first page in the chain. */
val = (u_int32_t)((u_int64_t)sc->tx_bd_chain_paddr[0] >> 32);
CTX_WR(sc, GET_CID_ADDR(TX_CID), BNX_L2CTX_TBDR_BHADDR_HI, val);
val = (u_int32_t)(sc->tx_bd_chain_paddr[0]);
CTX_WR(sc, GET_CID_ADDR(TX_CID), BNX_L2CTX_TBDR_BHADDR_LO, val);
DBRUN(BNX_VERBOSE_SEND, bnx_dump_tx_chain(sc, 0, TOTAL_TX_BD));
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Free memory and clear the TX data structures. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_free_tx_chain(struct bnx_softc *sc)
{
int i;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Unmap, unload, and free any mbufs still in the TX mbuf chain. */
for (i = 0; i < TOTAL_TX_BD; i++) {
if (sc->tx_mbuf_ptr[i] != NULL) {
if (sc->tx_mbuf_map != NULL)
bus_dmamap_sync(sc->bnx_dmatag,
sc->tx_mbuf_map[i], 0,
sc->tx_mbuf_map[i]->dm_mapsize,
BUS_DMASYNC_POSTWRITE);
m_freem(sc->tx_mbuf_ptr[i]);
sc->tx_mbuf_ptr[i] = NULL;
DBRUNIF(1, sc->tx_mbuf_alloc--);
}
}
/* Clear each TX chain page. */
for (i = 0; i < TX_PAGES; i++)
bzero((char *)sc->tx_bd_chain[i], BNX_TX_CHAIN_PAGE_SZ);
/* Check if we lost any mbufs in the process. */
DBRUNIF((sc->tx_mbuf_alloc),
printf("%s: Memory leak! Lost %d mbufs from tx chain!\n",
sc->tx_mbuf_alloc));
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Allocate memory and initialize the RX data structures. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_init_rx_chain(struct bnx_softc *sc)
{
struct rx_bd *rxbd;
int i, rc = 0;
u_int16_t prod, chain_prod;
u_int32_t prod_bseq, val, addr;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Initialize the RX producer and consumer indices. */
sc->rx_prod = 0;
sc->rx_cons = 0;
sc->rx_prod_bseq = 0;
sc->free_rx_bd = BNX_RX_SLACK_SPACE;
DBRUNIF(1, sc->rx_low_watermark = USABLE_RX_BD);
/* Initialize the RX next pointer chain entries. */
for (i = 0; i < RX_PAGES; i++) {
int j;
rxbd = &sc->rx_bd_chain[i][USABLE_RX_BD_PER_PAGE];
/* Check if we've reached the last page. */
if (i == (RX_PAGES - 1))
j = 0;
else
j = i + 1;
/* Setup the chain page pointers. */
addr = (u_int32_t)((u_int64_t)sc->rx_bd_chain_paddr[j] >> 32);
rxbd->rx_bd_haddr_hi = htole32(addr);
addr = (u_int32_t)(sc->rx_bd_chain_paddr[j]);
rxbd->rx_bd_haddr_lo = htole32(addr);
}
/* Initialize the context ID for an L2 RX chain. */
val = BNX_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE;
val |= BNX_L2CTX_CTX_TYPE_SIZE_L2;
val |= 0x02 << 8;
CTX_WR(sc, GET_CID_ADDR(RX_CID), BNX_L2CTX_CTX_TYPE, val);
/* Point the hardware to the first page in the chain. */
val = (u_int32_t)((u_int64_t)sc->rx_bd_chain_paddr[0] >> 32);
CTX_WR(sc, GET_CID_ADDR(RX_CID), BNX_L2CTX_NX_BDHADDR_HI, val);
val = (u_int32_t)(sc->rx_bd_chain_paddr[0]);
CTX_WR(sc, GET_CID_ADDR(RX_CID), BNX_L2CTX_NX_BDHADDR_LO, val);
/* Allocate mbuf clusters for the rx_bd chain. */
prod = prod_bseq = 0;
while (prod < BNX_RX_SLACK_SPACE) {
chain_prod = RX_CHAIN_IDX(prod);
if (bnx_get_buf(sc, NULL, &prod, &chain_prod, &prod_bseq)) {
BNX_PRINTF(sc, "Error filling RX chain: rx_bd[0x%04X]!\n",
chain_prod);
rc = ENOBUFS;
break;
}
prod = NEXT_RX_BD(prod);
}
/* Save the RX chain producer index. */
sc->rx_prod = prod;
sc->rx_prod_bseq = prod_bseq;
for (i = 0; i < RX_PAGES; i++)
bus_dmamap_sync(sc->bnx_dmatag, sc->rx_bd_chain_map[i], 0,
sc->rx_bd_chain_map[i]->dm_mapsize,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/* Tell the chip about the waiting rx_bd's. */
REG_WR16(sc, MB_RX_CID_ADDR + BNX_L2CTX_HOST_BDIDX, sc->rx_prod);
REG_WR(sc, MB_RX_CID_ADDR + BNX_L2CTX_HOST_BSEQ, sc->rx_prod_bseq);
DBRUN(BNX_VERBOSE_RECV, bnx_dump_rx_chain(sc, 0, TOTAL_RX_BD));
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Free memory and clear the RX data structures. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_free_rx_chain(struct bnx_softc *sc)
{
int i;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Free any mbufs still in the RX mbuf chain. */
for (i = 0; i < TOTAL_RX_BD; i++) {
if (sc->rx_mbuf_ptr[i] != NULL) {
if (sc->rx_mbuf_map[i] != NULL)
bus_dmamap_sync(sc->bnx_dmatag,
sc->rx_mbuf_map[i], 0,
sc->rx_mbuf_map[i]->dm_mapsize,
BUS_DMASYNC_POSTREAD);
m_freem(sc->rx_mbuf_ptr[i]);
sc->rx_mbuf_ptr[i] = NULL;
DBRUNIF(1, sc->rx_mbuf_alloc--);
}
}
/* Clear each RX chain page. */
for (i = 0; i < RX_PAGES; i++)
bzero((char *)sc->rx_bd_chain[i], BNX_RX_CHAIN_PAGE_SZ);
/* Check if we lost any mbufs in the process. */
DBRUNIF((sc->rx_mbuf_alloc),
printf("%s: Memory leak! Lost %d mbufs from rx chain!\n",
sc->rx_mbuf_alloc));
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Set media options. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_ifmedia_upd(struct ifnet *ifp)
{
struct bnx_softc *sc;
struct mii_data *mii;
struct ifmedia *ifm;
int rc = 0;
sc = ifp->if_softc;
ifm = &sc->bnx_ifmedia;
/* DRC - ToDo: Add SerDes support. */
mii = &sc->bnx_mii;
sc->bnx_link = 0;
if (mii->mii_instance) {
struct mii_softc *miisc;
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
mii_phy_reset(miisc);
}
mii_mediachg(mii);
return(rc);
}
/****************************************************************************/
/* Reports current media status. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct bnx_softc *sc;
struct mii_data *mii;
int s;
sc = ifp->if_softc;
s = splnet();
mii = &sc->bnx_mii;
/* DRC - ToDo: Add SerDes support. */
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
splx(s);
}
/****************************************************************************/
/* Handles PHY generated interrupt events. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_phy_intr(struct bnx_softc *sc)
{
u_int32_t new_link_state, old_link_state;
new_link_state = sc->status_block->status_attn_bits &
STATUS_ATTN_BITS_LINK_STATE;
old_link_state = sc->status_block->status_attn_bits_ack &
STATUS_ATTN_BITS_LINK_STATE;
/* Handle any changes if the link state has changed. */
if (new_link_state != old_link_state) {
DBRUN(BNX_VERBOSE_INTR, bnx_dump_status_block(sc));
sc->bnx_link = 0;
timeout_del(&sc->bnx_timeout);
bnx_tick(sc);
/* Update the status_attn_bits_ack field in the status block. */
if (new_link_state) {
REG_WR(sc, BNX_PCICFG_STATUS_BIT_SET_CMD,
STATUS_ATTN_BITS_LINK_STATE);
DBPRINT(sc, BNX_INFO, "Link is now UP.\n");
} else {
REG_WR(sc, BNX_PCICFG_STATUS_BIT_CLEAR_CMD,
STATUS_ATTN_BITS_LINK_STATE);
DBPRINT(sc, BNX_INFO, "Link is now DOWN.\n");
}
}
/* Acknowledge the link change interrupt. */
REG_WR(sc, BNX_EMAC_STATUS, BNX_EMAC_STATUS_LINK_CHANGE);
}
/****************************************************************************/
/* Handles received frame interrupt events. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_rx_intr(struct bnx_softc *sc)
{
struct status_block *sblk = sc->status_block;
struct ifnet *ifp = &sc->arpcom.ac_if;
u_int16_t hw_cons, sw_cons, sw_chain_cons;
u_int16_t sw_prod, sw_chain_prod;
u_int32_t sw_prod_bseq;
struct l2_fhdr *l2fhdr;
int i;
DBRUNIF(1, sc->rx_interrupts++);
/* Prepare the RX chain pages to be accessed by the host CPU. */
for (i = 0; i < RX_PAGES; i++)
bus_dmamap_sync(sc->bnx_dmatag,
sc->rx_bd_chain_map[i], 0,
sc->rx_bd_chain_map[i]->dm_mapsize,
BUS_DMASYNC_POSTWRITE);
/* Get the hardware's view of the RX consumer index. */
hw_cons = sc->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
hw_cons++;
/* Get working copies of the driver's view of the RX indices. */
sw_cons = sc->rx_cons;
sw_prod = sc->rx_prod;
sw_prod_bseq = sc->rx_prod_bseq;
DBPRINT(sc, BNX_INFO_RECV, "%s(enter): sw_prod = 0x%04X, "
"sw_cons = 0x%04X, sw_prod_bseq = 0x%08X\n",
__FUNCTION__, sw_prod, sw_cons, sw_prod_bseq);
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bnx_btag, sc->bnx_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
sc->rx_low_watermark = sc->free_rx_bd);
/*
* Scan through the receive chain as long
* as there is work to do.
*/
while (sw_cons != hw_cons) {
struct mbuf *m;
struct rx_bd *rxbd;
unsigned int len;
u_int32_t status;
/* Convert the producer/consumer indices to an actual
* rx_bd index.
*/
sw_chain_cons = RX_CHAIN_IDX(sw_cons);
sw_chain_prod = RX_CHAIN_IDX(sw_prod);
/* Get the used rx_bd. */
rxbd = &sc->rx_bd_chain[RX_PAGE(sw_chain_cons)][RX_IDX(sw_chain_cons)];
sc->free_rx_bd++;
DBRUN(BNX_VERBOSE_RECV, printf("%s(): ", __FUNCTION__);
bnx_dump_rxbd(sc, sw_chain_cons, rxbd));
/* The mbuf is stored with the last rx_bd entry of a packet. */
if (sc->rx_mbuf_ptr[sw_chain_cons] != NULL) {
/* Validate that this is the last rx_bd. */
DBRUNIF((!(rxbd->rx_bd_flags & RX_BD_FLAGS_END)),
printf("%s: Unexpected mbuf found in "
"rx_bd[0x%04X]!\n", sw_chain_cons);
bnx_breakpoint(sc));
/* DRC - ToDo: If the received packet is small, say less
* than 128 bytes, allocate a new mbuf here,
* copy the data to that mbuf, and recycle
* the mapped jumbo frame.
*/
/* Unmap the mbuf from DMA space. */
bus_dmamap_sync(sc->bnx_dmatag,
sc->rx_mbuf_map[sw_chain_cons], 0,
sc->rx_mbuf_map[sw_chain_cons]->dm_mapsize,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->bnx_dmatag,
sc->rx_mbuf_map[sw_chain_cons]);
/* Remove the mbuf from the driver's chain. */
m = sc->rx_mbuf_ptr[sw_chain_cons];
sc->rx_mbuf_ptr[sw_chain_cons] = NULL;
/*
* Frames received on the NetXteme II are prepended
* with the l2_fhdr structure which provides status
* information about the received frame (including
* VLAN tags and checksum info) and are also
* automatically adjusted to align the IP header
* (i.e. two null bytes are inserted before the
* Ethernet header).
*/
l2fhdr = mtod(m, struct l2_fhdr *);
len = l2fhdr->l2_fhdr_pkt_len;
status = l2fhdr->l2_fhdr_status;
DBRUNIF(DB_RANDOMTRUE(bnx_debug_l2fhdr_status_check),
printf("Simulating l2_fhdr status error.\n");
status = status | L2_FHDR_ERRORS_PHY_DECODE);
/* Watch for unusual sized frames. */
DBRUNIF(((len < BNX_MIN_MTU) ||
(len > BNX_MAX_JUMBO_ETHER_MTU_VLAN)),
printf("%s: Unusual frame size found. "
"Min(%d), Actual(%d), Max(%d)\n", (int)BNX_MIN_MTU,
len, (int) BNX_MAX_JUMBO_ETHER_MTU_VLAN);
bnx_dump_mbuf(sc, m);
bnx_breakpoint(sc));
len -= ETHER_CRC_LEN;
/* Check the received frame for errors. */
if (status & (L2_FHDR_ERRORS_BAD_CRC |
L2_FHDR_ERRORS_PHY_DECODE |
L2_FHDR_ERRORS_ALIGNMENT |
L2_FHDR_ERRORS_TOO_SHORT |
L2_FHDR_ERRORS_GIANT_FRAME)) {
ifp->if_ierrors++;
DBRUNIF(1, sc->l2fhdr_status_errors++);
/* Reuse the mbuf for a new frame. */
if (bnx_get_buf(sc, m, &sw_prod,
&sw_chain_prod, &sw_prod_bseq)) {
DBRUNIF(1, bnx_breakpoint(sc));
panic("%s: Can't reuse RX mbuf!\n",
sc->bnx_dev.dv_xname);
}
goto bnx_rx_int_next_rx;
}
/*
* Get a new mbuf for the rx_bd. If no new
* mbufs are available then reuse the current mbuf,
* log an ierror on the interface, and generate
* an error in the system log.
*/
if (bnx_get_buf(sc, NULL, &sw_prod, &sw_chain_prod,
&sw_prod_bseq)) {
DBRUN(BNX_WARN, BNX_PRINTF(sc, "Failed to allocate "
"new mbuf, incoming frame dropped!\n"));
ifp->if_ierrors++;
/* Try and reuse the exisitng mbuf. */
if (bnx_get_buf(sc, m, &sw_prod,
&sw_chain_prod, &sw_prod_bseq)) {
DBRUNIF(1, bnx_breakpoint(sc));
panic("%s: Double mbuf allocation "
"failure!", sc->bnx_dev.dv_xname);
}
goto bnx_rx_int_next_rx;
}
/* Skip over the l2_fhdr when passing the data up
* the stack.
*/
m_adj(m, sizeof(struct l2_fhdr) + ETHER_ALIGN);
/* Adjust the pckt length to match the received data. */
m->m_pkthdr.len = m->m_len = len;
/* Send the packet to the appropriate interface. */
m->m_pkthdr.rcvif = ifp;
DBRUN(BNX_VERBOSE_RECV,
struct ether_header *eh;
eh = mtod(m, struct ether_header *);
printf("%s: to: %6D, from: %6D, type: 0x%04X\n",
__FUNCTION__, eh->ether_dhost, ":",
eh->ether_shost, ":", htons(eh->ether_type)));
/* Validate the checksum. */
/* Check for an IP datagram. */
if (status & L2_FHDR_STATUS_IP_DATAGRAM) {
/* Check if the IP checksum is valid. */
if ((l2fhdr->l2_fhdr_ip_xsum ^ 0xffff)
== 0)
m->m_pkthdr.csum_flags |=
M_IPV4_CSUM_IN_OK;
else
DBPRINT(sc, BNX_WARN_SEND,
"%s(): Invalid IP checksum "
"= 0x%04X!\n",
__FUNCTION__,
l2fhdr->l2_fhdr_ip_xsum
);
}
/* Check for a valid TCP/UDP frame. */
if (status & (L2_FHDR_STATUS_TCP_SEGMENT |
L2_FHDR_STATUS_UDP_DATAGRAM)) {
/* Check for a good TCP/UDP checksum. */
if ((status &
(L2_FHDR_ERRORS_TCP_XSUM |
L2_FHDR_ERRORS_UDP_XSUM)) == 0) {
m->m_pkthdr.csum_flags |=
M_TCP_CSUM_IN_OK |
M_UDP_CSUM_IN_OK;
} else {
DBPRINT(sc, BNX_WARN_SEND,
"%s(): Invalid TCP/UDP "
"checksum = 0x%04X!\n",
__FUNCTION__,
l2fhdr->l2_fhdr_tcp_udp_xsum);
}
}
/*
* If we received a packet with a vlan tag,
* attach that information to the packet.
*/
if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
!(sc->rx_mode & BNX_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
#if NVLAN > 0
struct ether_vlan_header vh;
DBPRINT(sc, BNX_VERBOSE_SEND,
"%s(): VLAN tag = 0x%04X\n",
__FUNCTION__,
l2fhdr->l2_fhdr_vlan_tag);
if (m->m_pkthdr.len < ETHER_HDR_LEN) {
m_freem(m);
goto bnx_rx_int_next_rx;
}
m_copydata(m, 0, ETHER_HDR_LEN, (caddr_t)&vh);
vh.evl_proto = vh.evl_encap_proto;
vh.evl_tag = htons(l2fhdr->l2_fhdr_vlan_tag);
vh.evl_encap_proto = htons(ETHERTYPE_VLAN);
m_adj(m, ETHER_HDR_LEN);
M_PREPEND(m, sizeof(vh), M_DONTWAIT);
if (m == NULL)
goto bnx_rx_int_next_rx;
m_copyback(m, 0, sizeof(vh), &vh);
#else
m_freem(m);
goto bnx_rx_int_next_rx;
#endif
}
#if NBPFILTER > 0
/*
* Handle BPF listeners. Let the BPF
* user see the packet.
*/
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_IN);
#endif
/* Pass the mbuf off to the upper layers. */
ifp->if_ipackets++;
DBPRINT(sc, BNX_VERBOSE_RECV,
"%s(): Passing received frame up.\n", __FUNCTION__);
ether_input_mbuf(ifp, m);
DBRUNIF(1, sc->rx_mbuf_alloc--);
bnx_rx_int_next_rx:
sw_prod = NEXT_RX_BD(sw_prod);
}
sw_cons = NEXT_RX_BD(sw_cons);
/* Refresh hw_cons to see if there's new work */
if (sw_cons == hw_cons) {
hw_cons = sc->hw_rx_cons =
sblk->status_rx_quick_consumer_index0;
if ((hw_cons & USABLE_RX_BD_PER_PAGE) ==
USABLE_RX_BD_PER_PAGE)
hw_cons++;
}
/* Prevent speculative reads from getting ahead of
* the status block.
*/
bus_space_barrier(sc->bnx_btag, sc->bnx_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
}
for (i = 0; i < RX_PAGES; i++)
bus_dmamap_sync(sc->bnx_dmatag,
sc->rx_bd_chain_map[i], 0,
sc->rx_bd_chain_map[i]->dm_mapsize,
BUS_DMASYNC_PREWRITE);
sc->rx_cons = sw_cons;
sc->rx_prod = sw_prod;
sc->rx_prod_bseq = sw_prod_bseq;
REG_WR16(sc, MB_RX_CID_ADDR + BNX_L2CTX_HOST_BDIDX, sc->rx_prod);
REG_WR(sc, MB_RX_CID_ADDR + BNX_L2CTX_HOST_BSEQ, sc->rx_prod_bseq);
DBPRINT(sc, BNX_INFO_RECV, "%s(exit): rx_prod = 0x%04X, "
"rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n",
__FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq);
}
/****************************************************************************/
/* Handles transmit completion interrupt events. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_tx_intr(struct bnx_softc *sc)
{
struct status_block *sblk = sc->status_block;
struct ifnet *ifp = &sc->arpcom.ac_if;
u_int16_t hw_tx_cons, sw_tx_cons, sw_tx_chain_cons;
DBRUNIF(1, sc->tx_interrupts++);
/* Get the hardware's view of the TX consumer index. */
hw_tx_cons = sc->hw_tx_cons = sblk->status_tx_quick_consumer_index0;
/* Skip to the next entry if this is a chain page pointer. */
if ((hw_tx_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
hw_tx_cons++;
sw_tx_cons = sc->tx_cons;
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bnx_btag, sc->bnx_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
/* Cycle through any completed TX chain page entries. */
while (sw_tx_cons != hw_tx_cons) {
#ifdef BNX_DEBUG
struct tx_bd *txbd = NULL;
#endif
sw_tx_chain_cons = TX_CHAIN_IDX(sw_tx_cons);
DBPRINT(sc, BNX_INFO_SEND, "%s(): hw_tx_cons = 0x%04X, "
"sw_tx_cons = 0x%04X, sw_tx_chain_cons = 0x%04X\n",
__FUNCTION__, hw_tx_cons, sw_tx_cons, sw_tx_chain_cons);
DBRUNIF((sw_tx_chain_cons > MAX_TX_BD),
printf("%s: TX chain consumer out of range! "
" 0x%04X > 0x%04X\n", sw_tx_chain_cons, (int)MAX_TX_BD);
bnx_breakpoint(sc));
DBRUNIF(1, txbd = &sc->tx_bd_chain
[TX_PAGE(sw_tx_chain_cons)][TX_IDX(sw_tx_chain_cons)]);
DBRUNIF((txbd == NULL),
printf("%s: Unexpected NULL tx_bd[0x%04X]!\n",
sw_tx_chain_cons);
bnx_breakpoint(sc));
DBRUN(BNX_INFO_SEND, printf("%s: ", __FUNCTION__);
bnx_dump_txbd(sc, sw_tx_chain_cons, txbd));
/*
* Free the associated mbuf. Remember
* that only the last tx_bd of a packet
* has an mbuf pointer and DMA map.
*/
if (sc->tx_mbuf_ptr[sw_tx_chain_cons] != NULL) {
/* Validate that this is the last tx_bd. */
DBRUNIF((!(txbd->tx_bd_flags & TX_BD_FLAGS_END)),
printf("%s: tx_bd END flag not set but "
"txmbuf == NULL!\n");
bnx_breakpoint(sc));
DBRUN(BNX_INFO_SEND,
printf("%s: Unloading map/freeing mbuf "
"from tx_bd[0x%04X]\n",
__FUNCTION__, sw_tx_chain_cons));
/* Unmap the mbuf. */
bus_dmamap_unload(sc->bnx_dmatag,
sc->tx_mbuf_map[sw_tx_chain_cons]);
/* Free the mbuf. */
m_freem(sc->tx_mbuf_ptr[sw_tx_chain_cons]);
sc->tx_mbuf_ptr[sw_tx_chain_cons] = NULL;
DBRUNIF(1, sc->tx_mbuf_alloc--);
ifp->if_opackets++;
}
sc->used_tx_bd--;
sw_tx_cons = NEXT_TX_BD(sw_tx_cons);
/* Refresh hw_cons to see if there's new work. */
hw_tx_cons = sc->hw_tx_cons =
sblk->status_tx_quick_consumer_index0;
if ((hw_tx_cons & USABLE_TX_BD_PER_PAGE) ==
USABLE_TX_BD_PER_PAGE)
hw_tx_cons++;
/* Prevent speculative reads from getting ahead of
* the status block.
*/
bus_space_barrier(sc->bnx_btag, sc->bnx_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
}
/* Clear the TX timeout timer. */
ifp->if_timer = 0;
/* Clear the tx hardware queue full flag. */
if ((sc->used_tx_bd + BNX_TX_SLACK_SPACE) < USABLE_TX_BD) {
DBRUNIF((ifp->if_flags & IFF_OACTIVE),
printf("%s: TX chain is open for business! Used "
"tx_bd = %d\n", sc->used_tx_bd));
ifp->if_flags &= ~IFF_OACTIVE;
}
sc->tx_cons = sw_tx_cons;
}
/****************************************************************************/
/* Disables interrupt generation. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_disable_intr(struct bnx_softc *sc)
{
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD, BNX_PCICFG_INT_ACK_CMD_MASK_INT);
REG_RD(sc, BNX_PCICFG_INT_ACK_CMD);
}
/****************************************************************************/
/* Enables interrupt generation. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_enable_intr(struct bnx_softc *sc)
{
u_int32_t val;
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD, BNX_PCICFG_INT_ACK_CMD_INDEX_VALID |
BNX_PCICFG_INT_ACK_CMD_MASK_INT | sc->last_status_idx);
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD, BNX_PCICFG_INT_ACK_CMD_INDEX_VALID |
sc->last_status_idx);
val = REG_RD(sc, BNX_HC_COMMAND);
REG_WR(sc, BNX_HC_COMMAND, val | BNX_HC_COMMAND_COAL_NOW);
}
/****************************************************************************/
/* Handles controller initialization. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_init(void *xsc)
{
struct bnx_softc *sc = (struct bnx_softc *)xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
u_int32_t ether_mtu;
int s;
DBPRINT(sc, BNX_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
s = splnet();
bnx_stop(sc);
if (bnx_reset(sc, BNX_DRV_MSG_CODE_RESET)) {
BNX_PRINTF(sc, "Controller reset failed!\n");
goto bnx_init_exit;
}
if (bnx_chipinit(sc)) {
BNX_PRINTF(sc, "Controller initialization failed!\n");
goto bnx_init_exit;
}
if (bnx_blockinit(sc)) {
BNX_PRINTF(sc, "Block initialization failed!\n");
goto bnx_init_exit;
}
/* Load our MAC address. */
bcopy(sc->arpcom.ac_enaddr, sc->eaddr, ETHER_ADDR_LEN);
bnx_set_mac_addr(sc);
/* Calculate and program the Ethernet MRU size. */
ether_mtu = BNX_MAX_STD_ETHER_MTU_VLAN;
DBPRINT(sc, BNX_INFO, "%s(): setting MRU = %d\n",
__FUNCTION__, ether_mtu);
/*
* Program the MRU and enable Jumbo frame
* support.
*/
REG_WR(sc, BNX_EMAC_RX_MTU_SIZE, ether_mtu |
BNX_EMAC_RX_MTU_SIZE_JUMBO_ENA);
/* Calculate the RX Ethernet frame size for rx_bd's. */
sc->max_frame_size = sizeof(struct l2_fhdr) + 2 + ether_mtu + 8;
DBPRINT(sc, BNX_INFO, "%s(): mclbytes = %d, mbuf_alloc_size = %d, "
"max_frame_size = %d\n", __FUNCTION__, (int)MCLBYTES,
sc->mbuf_alloc_size, sc->max_frame_size);
/* Program appropriate promiscuous/multicast filtering. */
bnx_set_rx_mode(sc);
/* Init RX buffer descriptor chain. */
bnx_init_rx_chain(sc);
/* Init TX buffer descriptor chain. */
bnx_init_tx_chain(sc);
/* Enable host interrupts. */
bnx_enable_intr(sc);
bnx_ifmedia_upd(ifp);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
timeout_add(&sc->bnx_timeout, hz);
bnx_init_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
splx(s);
return;
}
void
bnx_mgmt_init(struct bnx_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
u_int32_t val;
/* Check if the driver is still running and bail out if it is. */
if (ifp->if_flags & IFF_RUNNING)
goto bnx_mgmt_init_exit;
/* Initialize the on-boards CPUs */
bnx_init_cpus(sc);
val = (BCM_PAGE_BITS - 8) << 24;
REG_WR(sc, BNX_RV2P_CONFIG, val);
/* Enable all critical blocks in the MAC. */
REG_WR(sc, BNX_MISC_ENABLE_SET_BITS,
BNX_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE |
BNX_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE |
BNX_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE);
REG_RD(sc, BNX_MISC_ENABLE_SET_BITS);
DELAY(20);
bnx_ifmedia_upd(ifp);
bnx_mgmt_init_exit:
DBPRINT(sc, BNX_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Encapsultes an mbuf cluster into the tx_bd chain structure and makes the */
/* memory visible to the controller. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_tx_encap(struct bnx_softc *sc, struct mbuf **m_head)
{
bus_dmamap_t map;
struct tx_bd *txbd = NULL;
struct mbuf *m0;
u_int16_t vlan_tag = 0, flags = 0;
u_int16_t chain_prod, prod;
#ifdef BNX_DEBUG
u_int16_t debug_prod;
#endif
u_int32_t addr, prod_bseq;
int i, error, rc = 0;
m0 = *m_head;
/* Transfer any checksum offload flags to the bd. */
if (m0->m_pkthdr.csum_flags) {
if (m0->m_pkthdr.csum_flags & M_IPV4_CSUM_OUT)
flags |= TX_BD_FLAGS_IP_CKSUM;
if (m0->m_pkthdr.csum_flags &
(M_TCPV4_CSUM_OUT | M_UDPV4_CSUM_OUT))
flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
}
#if NVLAN > 0
/* Transfer any VLAN tags to the bd. */
if ((m0->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) &&
m0->m_pkthdr.rcvif != NULL) {
struct ifvlan *ifv = m0->m_pkthdr.rcvif->if_softc;
flags |= TX_BD_FLAGS_VLAN_TAG;
vlan_tag = ifv->ifv_tag;
}
#endif
/* Map the mbuf into DMAable memory. */
prod = sc->tx_prod;
chain_prod = TX_CHAIN_IDX(prod);
map = sc->tx_mbuf_map[chain_prod];
/* Map the mbuf into our DMA address space. */
error = bus_dmamap_load_mbuf(sc->bnx_dmatag, map, m0, BUS_DMA_NOWAIT);
if (error != 0) {
printf("%s: Error mapping mbuf into TX chain!\n",
sc->bnx_dev.dv_xname);
m_freem(m0);
*m_head = NULL;
return (error);
}
/*
* The chip seems to require that at least 16 descriptors be kept
* empty at all times. Make sure we honor that.
* XXX Would it be faster to assume worst case scenario for
* map->dm_nsegs and do this calculation higher up?
*/
if (map->dm_nsegs > (USABLE_TX_BD - sc->used_tx_bd - BNX_TX_SLACK_SPACE)) {
bus_dmamap_unload(sc->bnx_dmatag, map);
return (ENOBUFS);
}
/* prod points to an empty tx_bd at this point. */
prod_bseq = sc->tx_prod_bseq;
#ifdef BNX_DEBUG
debug_prod = chain_prod;
#endif
DBPRINT(sc, BNX_INFO_SEND,
"%s(): Start: prod = 0x%04X, chain_prod = %04X, "
"prod_bseq = 0x%08X\n",
__FUNCTION__, *prod, chain_prod, prod_bseq);
/*
* Cycle through each mbuf segment that makes up
* the outgoing frame, gathering the mapping info
* for that segment and creating a tx_bd for the
* mbuf.
*/
for (i = 0; i < map->dm_nsegs ; i++) {
chain_prod = TX_CHAIN_IDX(prod);
txbd = &sc->tx_bd_chain[TX_PAGE(chain_prod)][TX_IDX(chain_prod)];
addr = (u_int32_t)(map->dm_segs[i].ds_addr);
txbd->tx_bd_haddr_lo = htole32(addr);
addr = (u_int32_t)((u_int64_t)map->dm_segs[i].ds_addr >> 32);
txbd->tx_bd_haddr_hi = htole32(addr);
txbd->tx_bd_mss_nbytes = htole16(map->dm_segs[i].ds_len);
txbd->tx_bd_vlan_tag = htole16(vlan_tag);
txbd->tx_bd_flags = htole16(flags);
prod_bseq += map->dm_segs[i].ds_len;
if (i == 0)
txbd->tx_bd_flags |= htole16(TX_BD_FLAGS_START);
prod = NEXT_TX_BD(prod);
}
/* Set the END flag on the last TX buffer descriptor. */
txbd->tx_bd_flags |= htole16(TX_BD_FLAGS_END);
DBRUN(BNX_INFO_SEND, bnx_dump_tx_chain(sc, debug_prod, nseg));
DBPRINT(sc, BNX_INFO_SEND,
"%s(): End: prod = 0x%04X, chain_prod = %04X, "
"prod_bseq = 0x%08X\n",
__FUNCTION__, prod, chain_prod, prod_bseq);
/*
* Ensure that the mbuf pointer for this
* transmission is placed at the array
* index of the last descriptor in this
* chain. This is done because a single
* map is used for all segments of the mbuf
* and we don't want to unload the map before
* all of the segments have been freed.
*/
sc->tx_mbuf_ptr[chain_prod] = m0;
sc->used_tx_bd += map->dm_nsegs;
DBRUNIF((sc->used_tx_bd > sc->tx_hi_watermark),
sc->tx_hi_watermark = sc->used_tx_bd);
DBRUNIF(1, sc->tx_mbuf_alloc++);
DBRUN(BNX_VERBOSE_SEND, bnx_dump_tx_mbuf_chain(sc, chain_prod,
map_arg.maxsegs));
/* prod points to the next free tx_bd at this point. */
sc->tx_prod = prod;
sc->tx_prod_bseq = prod_bseq;
return (rc);
}
/****************************************************************************/
/* Main transmit routine. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_start(struct ifnet *ifp)
{
struct bnx_softc *sc = ifp->if_softc;
struct mbuf *m_head = NULL;
int count = 0;
u_int16_t tx_prod, tx_chain_prod;
/* If there's no link or the transmit queue is empty then just exit. */
if (!sc->bnx_link || IFQ_IS_EMPTY(&ifp->if_snd)) {
DBPRINT(sc, BNX_INFO_SEND,
"%s(): No link or transmit queue empty.\n", __FUNCTION__);
goto bnx_start_exit;
}
/* prod points to the next free tx_bd. */
tx_prod = sc->tx_prod;
tx_chain_prod = TX_CHAIN_IDX(tx_prod);
DBPRINT(sc, BNX_INFO_SEND, "%s(): Start: tx_prod = 0x%04X, "
"tx_chain_prod = %04X, tx_prod_bseq = 0x%08X\n",
__FUNCTION__, tx_prod, tx_chain_prod, sc->tx_prod_bseq);
/*
* Keep adding entries while there is space in the ring. We keep
* BNX_TX_SLACK_SPACE entries unused at all times.
*/
while (sc->used_tx_bd < USABLE_TX_BD - BNX_TX_SLACK_SPACE) {
/* Check for any frames to send. */
IFQ_POLL(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
/*
* Pack the data into the transmit ring. If we
* don't have room, set the OACTIVE flag to wait
* for the NIC to drain the chain.
*/
if (bnx_tx_encap(sc, &m_head)) {
ifp->if_flags |= IFF_OACTIVE;
DBPRINT(sc, BNX_INFO_SEND, "TX chain is closed for "
"business! Total tx_bd used = %d\n",
sc->used_tx_bd);
break;
}
IFQ_DEQUEUE(&ifp->if_snd, m_head);
count++;
#if NBPFILTER > 0
/* Send a copy of the frame to any BPF listeners. */
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m_head, BPF_DIRECTION_OUT);
#endif
}
if (count == 0) {
/* no packets were dequeued */
DBPRINT(sc, BNX_VERBOSE_SEND,
"%s(): No packets were dequeued\n", __FUNCTION__);
goto bnx_start_exit;
}
/* Update the driver's counters. */
tx_chain_prod = TX_CHAIN_IDX(sc->tx_prod);
DBPRINT(sc, BNX_INFO_SEND, "%s(): End: tx_prod = 0x%04X, tx_chain_prod "
"= 0x%04X, tx_prod_bseq = 0x%08X\n", __FUNCTION__, tx_prod,
tx_chain_prod, sc->tx_prod_bseq);
/* Start the transmit. */
REG_WR16(sc, MB_TX_CID_ADDR + BNX_L2CTX_TX_HOST_BIDX, sc->tx_prod);
REG_WR(sc, MB_TX_CID_ADDR + BNX_L2CTX_TX_HOST_BSEQ, sc->tx_prod_bseq);
/* Set the tx timeout. */
ifp->if_timer = BNX_TX_TIMEOUT;
bnx_start_exit:
return;
}
/****************************************************************************/
/* Handles any IOCTL calls from the operating system. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
struct bnx_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
struct ifaddr *ifa = (struct ifaddr *)data;
struct mii_data *mii;
int s, error = 0;
s = splnet();
if ((error = ether_ioctl(ifp, &sc->arpcom, command, data)) > 0) {
splx(s);
return (error);
}
switch (command) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
if (!(ifp->if_flags & IFF_RUNNING))
bnx_init(sc);
#ifdef INET
if (ifa->ifa_addr->sa_family == AF_INET)
arp_ifinit(&sc->arpcom, ifa);
#endif /* INET */
break;
case SIOCSIFMTU:
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ifp->if_hardmtu)
error = EINVAL;
else if (ifp->if_mtu != ifr->ifr_mtu)
ifp->if_mtu = ifr->ifr_mtu;
break;
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if ((ifp->if_flags & IFF_RUNNING) &&
((ifp->if_flags ^ sc->bnx_if_flags) &
(IFF_ALLMULTI | IFF_PROMISC)) != 0) {
bnx_set_rx_mode(sc);
} else {
if (!(ifp->if_flags & IFF_RUNNING))
bnx_init(sc);
}
} else {
if (ifp->if_flags & IFF_RUNNING)
bnx_stop(sc);
}
sc->bnx_if_flags = ifp->if_flags;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
error = (command == SIOCADDMULTI)
? ether_addmulti(ifr, &sc->arpcom)
: ether_delmulti(ifr, &sc->arpcom);
if (error == ENETRESET) {
if (ifp->if_flags & IFF_RUNNING)
bnx_set_rx_mode(sc);
error = 0;
}
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
DBPRINT(sc, BNX_VERBOSE, "bnx_phy_flags = 0x%08X\n",
sc->bnx_phy_flags);
if (sc->bnx_phy_flags & BNX_PHY_SERDES_FLAG)
error = ifmedia_ioctl(ifp, ifr,
&sc->bnx_ifmedia, command);
else {
mii = &sc->bnx_mii;
error = ifmedia_ioctl(ifp, ifr,
&mii->mii_media, command);
}
break;
default:
error = ENOTTY;
break;
}
splx(s);
return (error);
}
/****************************************************************************/
/* Transmit timeout handler. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_watchdog(struct ifnet *ifp)
{
struct bnx_softc *sc = ifp->if_softc;
DBRUN(BNX_WARN_SEND, bnx_dump_driver_state(sc);
bnx_dump_status_block(sc));
printf("%s: Watchdog timeout occurred, resetting!\n",
ifp->if_xname);
/* DBRUN(BNX_FATAL, bnx_breakpoint(sc)); */
bnx_init(sc);
ifp->if_oerrors++;
}
/*
* Interrupt handler.
*/
/****************************************************************************/
/* Main interrupt entry point. Verifies that the controller generated the */
/* interrupt and then calls a separate routine for handle the various */
/* interrupt causes (PHY, TX, RX). */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
int
bnx_intr(void *xsc)
{
struct bnx_softc *sc;
struct ifnet *ifp;
u_int32_t status_attn_bits;
sc = xsc;
if ((sc->bnx_flags & BNX_ACTIVE_FLAG) == 0)
return (0);
ifp = &sc->arpcom.ac_if;
DBRUNIF(1, sc->interrupts_generated++);
bus_dmamap_sync(sc->bnx_dmatag, sc->status_map, 0,
sc->status_map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
/*
* If the hardware status block index
* matches the last value read by the
* driver and we haven't asserted our
* interrupt then there's nothing to do.
*/
if ((sc->status_block->status_idx == sc->last_status_idx) &&
(REG_RD(sc, BNX_PCICFG_MISC_STATUS) &
BNX_PCICFG_MISC_STATUS_INTA_VALUE))
return (0);
/* Ack the interrupt and stop others from occuring. */
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD,
BNX_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
BNX_PCICFG_INT_ACK_CMD_MASK_INT);
/* Keep processing data as long as there is work to do. */
for (;;) {
status_attn_bits = sc->status_block->status_attn_bits;
DBRUNIF(DB_RANDOMTRUE(bnx_debug_unexpected_attention),
printf("Simulating unexpected status attention bit set.");
status_attn_bits = status_attn_bits |
STATUS_ATTN_BITS_PARITY_ERROR);
/* Was it a link change interrupt? */
if ((status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) !=
(sc->status_block->status_attn_bits_ack &
STATUS_ATTN_BITS_LINK_STATE))
bnx_phy_intr(sc);
/* If any other attention is asserted then the chip is toast. */
if (((status_attn_bits & ~STATUS_ATTN_BITS_LINK_STATE) !=
(sc->status_block->status_attn_bits_ack &
~STATUS_ATTN_BITS_LINK_STATE))) {
DBRUN(1, sc->unexpected_attentions++);
BNX_PRINTF(sc, "Fatal attention detected: 0x%08X\n",
sc->status_block->status_attn_bits);
DBRUN(BNX_FATAL,
if (bnx_debug_unexpected_attention == 0)
bnx_breakpoint(sc));
bnx_init(sc);
return (1);
}
/* Check for any completed RX frames. */
if (sc->status_block->status_rx_quick_consumer_index0 !=
sc->hw_rx_cons)
bnx_rx_intr(sc);
/* Check for any completed TX frames. */
if (sc->status_block->status_tx_quick_consumer_index0 !=
sc->hw_tx_cons)
bnx_tx_intr(sc);
/* Save the status block index value for use during the
* next interrupt.
*/
sc->last_status_idx = sc->status_block->status_idx;
/* Prevent speculative reads from getting ahead of the
* status block.
*/
bus_space_barrier(sc->bnx_btag, sc->bnx_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
/* If there's no work left then exit the isr. */
if ((sc->status_block->status_rx_quick_consumer_index0 ==
sc->hw_rx_cons) &&
(sc->status_block->status_tx_quick_consumer_index0 ==
sc->hw_tx_cons))
break;
}
bus_dmamap_sync(sc->bnx_dmatag, sc->status_map, 0,
sc->status_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
/* Re-enable interrupts. */
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD,
BNX_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx |
BNX_PCICFG_INT_ACK_CMD_MASK_INT);
REG_WR(sc, BNX_PCICFG_INT_ACK_CMD,
BNX_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx);
/* Handle any frames that arrived while handling the interrupt. */
if (ifp->if_flags & IFF_RUNNING && !IFQ_IS_EMPTY(&ifp->if_snd))
bnx_start(ifp);
return (1);
}
/****************************************************************************/
/* Programs the various packet receive modes (broadcast and multicast). */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_set_rx_mode(struct bnx_softc *sc)
{
struct arpcom *ac = &sc->arpcom;
struct ifnet *ifp = &ac->ac_if;
struct ether_multi *enm;
struct ether_multistep step;
u_int32_t hashes[NUM_MC_HASH_REGISTERS] = { 0, 0, 0, 0, 0, 0, 0, 0 };
u_int32_t rx_mode, sort_mode;
int h, i;
/* Initialize receive mode default settings. */
rx_mode = sc->rx_mode & ~(BNX_EMAC_RX_MODE_PROMISCUOUS |
BNX_EMAC_RX_MODE_KEEP_VLAN_TAG);
sort_mode = 1 | BNX_RPM_SORT_USER0_BC_EN;
/*
* ASF/IPMI/UMP firmware requires that VLAN tag stripping
* be enbled.
*/
if (!(sc->bnx_flags & BNX_MFW_ENABLE_FLAG))
rx_mode |= BNX_EMAC_RX_MODE_KEEP_VLAN_TAG;
/*
* Check for promiscuous, all multicast, or selected
* multicast address filtering.
*/
if (ifp->if_flags & IFF_PROMISC) {
DBPRINT(sc, BNX_INFO, "Enabling promiscuous mode.\n");
/* Enable promiscuous mode. */
rx_mode |= BNX_EMAC_RX_MODE_PROMISCUOUS;
sort_mode |= BNX_RPM_SORT_USER0_PROM_EN;
} else if (ifp->if_flags & IFF_ALLMULTI) {
allmulti:
DBPRINT(sc, BNX_INFO, "Enabling all multicast mode.\n");
/* Enable all multicast addresses. */
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++)
REG_WR(sc, BNX_EMAC_MULTICAST_HASH0 + (i * 4),
0xffffffff);
sort_mode |= BNX_RPM_SORT_USER0_MC_EN;
} else {
/* Accept one or more multicast(s). */
DBPRINT(sc, BNX_INFO, "Enabling selective multicast mode.\n");
ETHER_FIRST_MULTI(step, ac, enm);
while (enm != NULL) {
if (bcmp(enm->enm_addrlo, enm->enm_addrhi,
ETHER_ADDR_LEN)) {
ifp->if_flags |= IFF_ALLMULTI;
goto allmulti;
}
h = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN) &
0xFF;
hashes[(h & 0xE0) >> 5] |= 1 << (h & 0x1F);
ETHER_NEXT_MULTI(step, enm);
}
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++)
REG_WR(sc, BNX_EMAC_MULTICAST_HASH0 + (i * 4),
hashes[i]);
sort_mode |= BNX_RPM_SORT_USER0_MC_HSH_EN;
}
/* Only make changes if the recive mode has actually changed. */
if (rx_mode != sc->rx_mode) {
DBPRINT(sc, BNX_VERBOSE, "Enabling new receive mode: 0x%08X\n",
rx_mode);
sc->rx_mode = rx_mode;
REG_WR(sc, BNX_EMAC_RX_MODE, rx_mode);
}
/* Disable and clear the exisitng sort before enabling a new sort. */
REG_WR(sc, BNX_RPM_SORT_USER0, 0x0);
REG_WR(sc, BNX_RPM_SORT_USER0, sort_mode);
REG_WR(sc, BNX_RPM_SORT_USER0, sort_mode | BNX_RPM_SORT_USER0_ENA);
}
/****************************************************************************/
/* Called periodically to updates statistics from the controllers */
/* statistics block. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_stats_update(struct bnx_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct statistics_block *stats;
DBPRINT(sc, BNX_EXCESSIVE, "Entering %s()\n", __FUNCTION__);
stats = (struct statistics_block *)sc->stats_block;
/*
* Update the interface statistics from the
* hardware statistics.
*/
ifp->if_collisions = (u_long)stats->stat_EtherStatsCollisions;
ifp->if_ierrors = (u_long)stats->stat_EtherStatsUndersizePkts +
(u_long)stats->stat_EtherStatsOverrsizePkts +
(u_long)stats->stat_IfInMBUFDiscards +
(u_long)stats->stat_Dot3StatsAlignmentErrors +
(u_long)stats->stat_Dot3StatsFCSErrors;
ifp->if_oerrors = (u_long)
stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors +
(u_long)stats->stat_Dot3StatsExcessiveCollisions +
(u_long)stats->stat_Dot3StatsLateCollisions;
/*
* Certain controllers don't report
* carrier sense errors correctly.
* See errata E11_5708CA0_1165.
*/
if (!(BNX_CHIP_NUM(sc) == BNX_CHIP_NUM_5706) &&
!(BNX_CHIP_ID(sc) == BNX_CHIP_ID_5708_A0))
ifp->if_oerrors += (u_long) stats->stat_Dot3StatsCarrierSenseErrors;
/*
* Update the sysctl statistics from the
* hardware statistics.
*/
sc->stat_IfHCInOctets = ((u_int64_t)stats->stat_IfHCInOctets_hi << 32) +
(u_int64_t) stats->stat_IfHCInOctets_lo;
sc->stat_IfHCInBadOctets =
((u_int64_t) stats->stat_IfHCInBadOctets_hi << 32) +
(u_int64_t) stats->stat_IfHCInBadOctets_lo;
sc->stat_IfHCOutOctets =
((u_int64_t) stats->stat_IfHCOutOctets_hi << 32) +
(u_int64_t) stats->stat_IfHCOutOctets_lo;
sc->stat_IfHCOutBadOctets =
((u_int64_t) stats->stat_IfHCOutBadOctets_hi << 32) +
(u_int64_t) stats->stat_IfHCOutBadOctets_lo;
sc->stat_IfHCInUcastPkts =
((u_int64_t) stats->stat_IfHCInUcastPkts_hi << 32) +
(u_int64_t) stats->stat_IfHCInUcastPkts_lo;
sc->stat_IfHCInMulticastPkts =
((u_int64_t) stats->stat_IfHCInMulticastPkts_hi << 32) +
(u_int64_t) stats->stat_IfHCInMulticastPkts_lo;
sc->stat_IfHCInBroadcastPkts =
((u_int64_t) stats->stat_IfHCInBroadcastPkts_hi << 32) +
(u_int64_t) stats->stat_IfHCInBroadcastPkts_lo;
sc->stat_IfHCOutUcastPkts =
((u_int64_t) stats->stat_IfHCOutUcastPkts_hi << 32) +
(u_int64_t) stats->stat_IfHCOutUcastPkts_lo;
sc->stat_IfHCOutMulticastPkts =
((u_int64_t) stats->stat_IfHCOutMulticastPkts_hi << 32) +
(u_int64_t) stats->stat_IfHCOutMulticastPkts_lo;
sc->stat_IfHCOutBroadcastPkts =
((u_int64_t) stats->stat_IfHCOutBroadcastPkts_hi << 32) +
(u_int64_t) stats->stat_IfHCOutBroadcastPkts_lo;
sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors =
stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors;
sc->stat_Dot3StatsCarrierSenseErrors =
stats->stat_Dot3StatsCarrierSenseErrors;
sc->stat_Dot3StatsFCSErrors = stats->stat_Dot3StatsFCSErrors;
sc->stat_Dot3StatsAlignmentErrors =
stats->stat_Dot3StatsAlignmentErrors;
sc->stat_Dot3StatsSingleCollisionFrames =
stats->stat_Dot3StatsSingleCollisionFrames;
sc->stat_Dot3StatsMultipleCollisionFrames =
stats->stat_Dot3StatsMultipleCollisionFrames;
sc->stat_Dot3StatsDeferredTransmissions =
stats->stat_Dot3StatsDeferredTransmissions;
sc->stat_Dot3StatsExcessiveCollisions =
stats->stat_Dot3StatsExcessiveCollisions;
sc->stat_Dot3StatsLateCollisions = stats->stat_Dot3StatsLateCollisions;
sc->stat_EtherStatsCollisions = stats->stat_EtherStatsCollisions;
sc->stat_EtherStatsFragments = stats->stat_EtherStatsFragments;
sc->stat_EtherStatsJabbers = stats->stat_EtherStatsJabbers;
sc->stat_EtherStatsUndersizePkts = stats->stat_EtherStatsUndersizePkts;
sc->stat_EtherStatsOverrsizePkts = stats->stat_EtherStatsOverrsizePkts;
sc->stat_EtherStatsPktsRx64Octets =
stats->stat_EtherStatsPktsRx64Octets;
sc->stat_EtherStatsPktsRx65Octetsto127Octets =
stats->stat_EtherStatsPktsRx65Octetsto127Octets;
sc->stat_EtherStatsPktsRx128Octetsto255Octets =
stats->stat_EtherStatsPktsRx128Octetsto255Octets;
sc->stat_EtherStatsPktsRx256Octetsto511Octets =
stats->stat_EtherStatsPktsRx256Octetsto511Octets;
sc->stat_EtherStatsPktsRx512Octetsto1023Octets =
stats->stat_EtherStatsPktsRx512Octetsto1023Octets;
sc->stat_EtherStatsPktsRx1024Octetsto1522Octets =
stats->stat_EtherStatsPktsRx1024Octetsto1522Octets;
sc->stat_EtherStatsPktsRx1523Octetsto9022Octets =
stats->stat_EtherStatsPktsRx1523Octetsto9022Octets;
sc->stat_EtherStatsPktsTx64Octets =
stats->stat_EtherStatsPktsTx64Octets;
sc->stat_EtherStatsPktsTx65Octetsto127Octets =
stats->stat_EtherStatsPktsTx65Octetsto127Octets;
sc->stat_EtherStatsPktsTx128Octetsto255Octets =
stats->stat_EtherStatsPktsTx128Octetsto255Octets;
sc->stat_EtherStatsPktsTx256Octetsto511Octets =
stats->stat_EtherStatsPktsTx256Octetsto511Octets;
sc->stat_EtherStatsPktsTx512Octetsto1023Octets =
stats->stat_EtherStatsPktsTx512Octetsto1023Octets;
sc->stat_EtherStatsPktsTx1024Octetsto1522Octets =
stats->stat_EtherStatsPktsTx1024Octetsto1522Octets;
sc->stat_EtherStatsPktsTx1523Octetsto9022Octets =
stats->stat_EtherStatsPktsTx1523Octetsto9022Octets;
sc->stat_XonPauseFramesReceived = stats->stat_XonPauseFramesReceived;
sc->stat_XoffPauseFramesReceived = stats->stat_XoffPauseFramesReceived;
sc->stat_OutXonSent = stats->stat_OutXonSent;
sc->stat_OutXoffSent = stats->stat_OutXoffSent;
sc->stat_FlowControlDone = stats->stat_FlowControlDone;
sc->stat_MacControlFramesReceived =
stats->stat_MacControlFramesReceived;
sc->stat_XoffStateEntered = stats->stat_XoffStateEntered;
sc->stat_IfInFramesL2FilterDiscards =
stats->stat_IfInFramesL2FilterDiscards;
sc->stat_IfInRuleCheckerDiscards = stats->stat_IfInRuleCheckerDiscards;
sc->stat_IfInFTQDiscards = stats->stat_IfInFTQDiscards;
sc->stat_IfInMBUFDiscards = stats->stat_IfInMBUFDiscards;
sc->stat_IfInRuleCheckerP4Hit = stats->stat_IfInRuleCheckerP4Hit;
sc->stat_CatchupInRuleCheckerDiscards =
stats->stat_CatchupInRuleCheckerDiscards;
sc->stat_CatchupInFTQDiscards = stats->stat_CatchupInFTQDiscards;
sc->stat_CatchupInMBUFDiscards = stats->stat_CatchupInMBUFDiscards;
sc->stat_CatchupInRuleCheckerP4Hit =
stats->stat_CatchupInRuleCheckerP4Hit;
DBPRINT(sc, BNX_EXCESSIVE, "Exiting %s()\n", __FUNCTION__);
}
void
bnx_tick(void *xsc)
{
struct bnx_softc *sc = xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mii_data *mii = NULL;
u_int32_t msg;
/* Tell the firmware that the driver is still running. */
#ifdef BNX_DEBUG
msg = (u_int32_t)BNX_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE;
#else
msg = (u_int32_t)++sc->bnx_fw_drv_pulse_wr_seq;
#endif
REG_WR_IND(sc, sc->bnx_shmem_base + BNX_DRV_PULSE_MB, msg);
/* Update the statistics from the hardware statistics block. */
bnx_stats_update(sc);
/* Schedule the next tick. */
timeout_add(&sc->bnx_timeout, hz);
/* If link is up already up then we're done. */
if (sc->bnx_link)
goto bnx_tick_exit;
/* DRC - ToDo: Add SerDes support and check SerDes link here. */
mii = &sc->bnx_mii;
mii_tick(mii);
/* Check if the link has come up. */
if (!sc->bnx_link && mii->mii_media_status & IFM_ACTIVE &&
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
sc->bnx_link++;
/* Now that link is up, handle any outstanding TX traffic. */
if (!IFQ_IS_EMPTY(&ifp->if_snd))
bnx_start(ifp);
}
bnx_tick_exit:
return;
}
/****************************************************************************/
/* BNX Debug Routines */
/****************************************************************************/
#ifdef BNX_DEBUG
/****************************************************************************/
/* Prints out information about an mbuf. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_dump_mbuf(struct bnx_softc *sc, struct mbuf *m)
{
struct mbuf *mp = m;
if (m == NULL) {
/* Index out of range. */
printf("mbuf ptr is null!\n");
return;
}
while (mp) {
printf("mbuf: vaddr = %p, m_len = %d, m_flags = ",
mp, mp->m_len);
if (mp->m_flags & M_EXT)
printf("M_EXT ");
if (mp->m_flags & M_PKTHDR)
printf("M_PKTHDR ");
printf("\n");
if (mp->m_flags & M_EXT)
printf("- m_ext: vaddr = %p, ext_size = 0x%04X\n",
mp, mp->m_ext.ext_size);
mp = mp->m_next;
}
}
/****************************************************************************/
/* Prints out the mbufs in the TX mbuf chain. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
void
bnx_dump_tx_mbuf_chain(struct bnx_softc *sc, int chain_prod, int count)
{
struct mbuf *m;
int i;
BNX_PRINTF(sc,
"----------------------------"
" tx mbuf data "
"----------------------------\n");
for (i = 0; i < count; i++) {
m = sc->tx_mbuf_ptr[chain_prod];
BNX_PRINTF(sc, "txmbuf[%d]\n", chain_prod);
bnx_dump_mbuf(sc, m);
chain_prod = TX_CHAIN_IDX(NEXT_TX_BD(chain_prod));
}
BNX_PRINTF(sc,
"--------------------------------------------"
"----------------------------\n");
}
/*
* This routine prints the RX mbuf chain.
*/
void
bnx_dump_rx_mbuf_chain(struct bnx_softc *sc, int chain_prod, int count)
{
struct mbuf *m;
int i;
BNX_PRINTF(sc,
"----------------------------"
" rx mbuf data "
"----------------------------\n");
for (i = 0; i < count; i++) {
m = sc->rx_mbuf_ptr[chain_prod];
BNX_PRINTF(sc, "rxmbuf[0x%04X]\n", chain_prod);
bnx_dump_mbuf(sc, m);
chain_prod = RX_CHAIN_IDX(NEXT_RX_BD(chain_prod));
}
BNX_PRINTF(sc,
"--------------------------------------------"
"----------------------------\n");
}
void
bnx_dump_txbd(struct bnx_softc *sc, int idx, struct tx_bd *txbd)
{
if (idx > MAX_TX_BD)
/* Index out of range. */
BNX_PRINTF(sc, "tx_bd[0x%04X]: Invalid tx_bd index!\n", idx);
else if ((idx & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
/* TX Chain page pointer. */
BNX_PRINTF(sc, "tx_bd[0x%04X]: haddr = 0x%08X:%08X, chain "
"page pointer\n", idx, txbd->tx_bd_haddr_hi,
txbd->tx_bd_haddr_lo);
else
/* Normal tx_bd entry. */
BNX_PRINTF(sc, "tx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = "
"0x%08X, vlan tag = 0x%4X, flags = 0x%08X\n", idx,
txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo,
txbd->tx_bd_mss_nbytes, txbd->tx_bd_vlan_tag,
txbd->tx_bd_flags);
}
void
bnx_dump_rxbd(struct bnx_softc *sc, int idx, struct rx_bd *rxbd)
{
if (idx > MAX_RX_BD)
/* Index out of range. */
BNX_PRINTF(sc, "rx_bd[0x%04X]: Invalid rx_bd index!\n", idx);
else if ((idx & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
/* TX Chain page pointer. */
BNX_PRINTF(sc, "rx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page "
"pointer\n", idx, rxbd->rx_bd_haddr_hi,
rxbd->rx_bd_haddr_lo);
else
/* Normal tx_bd entry. */
BNX_PRINTF(sc, "rx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = "
"0x%08X, flags = 0x%08X\n", idx,
rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo,
rxbd->rx_bd_len, rxbd->rx_bd_flags);
}
void
bnx_dump_l2fhdr(struct bnx_softc *sc, int idx, struct l2_fhdr *l2fhdr)
{
BNX_PRINTF(sc, "l2_fhdr[0x%04X]: status = 0x%08X, "
"pkt_len = 0x%04X, vlan = 0x%04x, ip_xsum = 0x%04X, "
"tcp_udp_xsum = 0x%04X\n", idx,
l2fhdr->l2_fhdr_status, l2fhdr->l2_fhdr_pkt_len,
l2fhdr->l2_fhdr_vlan_tag, l2fhdr->l2_fhdr_ip_xsum,
l2fhdr->l2_fhdr_tcp_udp_xsum);
}
/*
* This routine prints the TX chain.
*/
void
bnx_dump_tx_chain(struct bnx_softc *sc, int tx_prod, int count)
{
struct tx_bd *txbd;
int i;
/* First some info about the tx_bd chain structure. */
BNX_PRINTF(sc,
"----------------------------"
" tx_bd chain "
"----------------------------\n");
BNX_PRINTF(sc,
"page size = 0x%08X, tx chain pages = 0x%08X\n",
(u_int32_t)BCM_PAGE_SIZE, (u_int32_t) TX_PAGES);
BNX_PRINTF(sc,
"tx_bd per page = 0x%08X, usable tx_bd per page = 0x%08X\n",
(u_int32_t)TOTAL_TX_BD_PER_PAGE, (u_int32_t)USABLE_TX_BD_PER_PAGE);
BNX_PRINTF(sc, "total tx_bd = 0x%08X\n", (u_int32_t)TOTAL_TX_BD);
BNX_PRINTF(sc, ""
"-----------------------------"
" tx_bd data "
"-----------------------------\n");
/* Now print out the tx_bd's themselves. */
for (i = 0; i < count; i++) {
txbd = &sc->tx_bd_chain[TX_PAGE(tx_prod)][TX_IDX(tx_prod)];
bnx_dump_txbd(sc, tx_prod, txbd);
tx_prod = TX_CHAIN_IDX(NEXT_TX_BD(tx_prod));
}
BNX_PRINTF(sc,
"-----------------------------"
"--------------"
"-----------------------------\n");
}
/*
* This routine prints the RX chain.
*/
void
bnx_dump_rx_chain(struct bnx_softc *sc, int rx_prod, int count)
{
struct rx_bd *rxbd;
int i;
/* First some info about the tx_bd chain structure. */
BNX_PRINTF(sc,
"----------------------------"
" rx_bd chain "
"----------------------------\n");
BNX_PRINTF(sc, "----- RX_BD Chain -----\n");
BNX_PRINTF(sc,
"page size = 0x%08X, rx chain pages = 0x%08X\n",
(u_int32_t)BCM_PAGE_SIZE, (u_int32_t)RX_PAGES);
BNX_PRINTF(sc,
"rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
(u_int32_t)TOTAL_RX_BD_PER_PAGE, (u_int32_t)USABLE_RX_BD_PER_PAGE);
BNX_PRINTF(sc, "total rx_bd = 0x%08X\n", (u_int32_t)TOTAL_RX_BD);
BNX_PRINTF(sc,
"----------------------------"
" rx_bd data "
"----------------------------\n");
/* Now print out the rx_bd's themselves. */
for (i = 0; i < count; i++) {
rxbd = &sc->rx_bd_chain[RX_PAGE(rx_prod)][RX_IDX(rx_prod)];
bnx_dump_rxbd(sc, rx_prod, rxbd);
rx_prod = RX_CHAIN_IDX(NEXT_RX_BD(rx_prod));
}
BNX_PRINTF(sc,
"----------------------------"
"--------------"
"----------------------------\n");
}
/*
* This routine prints the status block.
*/
void
bnx_dump_status_block(struct bnx_softc *sc)
{
struct status_block *sblk;
sblk = sc->status_block;
BNX_PRINTF(sc, "----------------------------- Status Block "
"-----------------------------\n");
BNX_PRINTF(sc,
"attn_bits = 0x%08X, attn_bits_ack = 0x%08X, index = 0x%04X\n",
sblk->status_attn_bits, sblk->status_attn_bits_ack,
sblk->status_idx);
BNX_PRINTF(sc, "rx_cons0 = 0x%08X, tx_cons0 = 0x%08X\n",
sblk->status_rx_quick_consumer_index0,
sblk->status_tx_quick_consumer_index0);
BNX_PRINTF(sc, "status_idx = 0x%04X\n", sblk->status_idx);
/* Theses indices are not used for normal L2 drivers. */
if (sblk->status_rx_quick_consumer_index1 ||
sblk->status_tx_quick_consumer_index1)
BNX_PRINTF(sc, "rx_cons1 = 0x%08X, tx_cons1 = 0x%08X\n",
sblk->status_rx_quick_consumer_index1,
sblk->status_tx_quick_consumer_index1);
if (sblk->status_rx_quick_consumer_index2 ||
sblk->status_tx_quick_consumer_index2)
BNX_PRINTF(sc, "rx_cons2 = 0x%08X, tx_cons2 = 0x%08X\n",
sblk->status_rx_quick_consumer_index2,
sblk->status_tx_quick_consumer_index2);
if (sblk->status_rx_quick_consumer_index3 ||
sblk->status_tx_quick_consumer_index3)
BNX_PRINTF(sc, "rx_cons3 = 0x%08X, tx_cons3 = 0x%08X\n",
sblk->status_rx_quick_consumer_index3,
sblk->status_tx_quick_consumer_index3);
if (sblk->status_rx_quick_consumer_index4 ||
sblk->status_rx_quick_consumer_index5)
BNX_PRINTF(sc, "rx_cons4 = 0x%08X, rx_cons5 = 0x%08X\n",
sblk->status_rx_quick_consumer_index4,
sblk->status_rx_quick_consumer_index5);
if (sblk->status_rx_quick_consumer_index6 ||
sblk->status_rx_quick_consumer_index7)
BNX_PRINTF(sc, "rx_cons6 = 0x%08X, rx_cons7 = 0x%08X\n",
sblk->status_rx_quick_consumer_index6,
sblk->status_rx_quick_consumer_index7);
if (sblk->status_rx_quick_consumer_index8 ||
sblk->status_rx_quick_consumer_index9)
BNX_PRINTF(sc, "rx_cons8 = 0x%08X, rx_cons9 = 0x%08X\n",
sblk->status_rx_quick_consumer_index8,
sblk->status_rx_quick_consumer_index9);
if (sblk->status_rx_quick_consumer_index10 ||
sblk->status_rx_quick_consumer_index11)
BNX_PRINTF(sc, "rx_cons10 = 0x%08X, rx_cons11 = 0x%08X\n",
sblk->status_rx_quick_consumer_index10,
sblk->status_rx_quick_consumer_index11);
if (sblk->status_rx_quick_consumer_index12 ||
sblk->status_rx_quick_consumer_index13)
BNX_PRINTF(sc, "rx_cons12 = 0x%08X, rx_cons13 = 0x%08X\n",
sblk->status_rx_quick_consumer_index12,
sblk->status_rx_quick_consumer_index13);
if (sblk->status_rx_quick_consumer_index14 ||
sblk->status_rx_quick_consumer_index15)
BNX_PRINTF(sc, "rx_cons14 = 0x%08X, rx_cons15 = 0x%08X\n",
sblk->status_rx_quick_consumer_index14,
sblk->status_rx_quick_consumer_index15);
if (sblk->status_completion_producer_index ||
sblk->status_cmd_consumer_index)
BNX_PRINTF(sc, "com_prod = 0x%08X, cmd_cons = 0x%08X\n",
sblk->status_completion_producer_index,
sblk->status_cmd_consumer_index);
BNX_PRINTF(sc, "-------------------------------------------"
"-----------------------------\n");
}
/*
* This routine prints the statistics block.
*/
void
bnx_dump_stats_block(struct bnx_softc *sc)
{
struct statistics_block *sblk;
sblk = sc->stats_block;
BNX_PRINTF(sc, ""
"-----------------------------"
" Stats Block "
"-----------------------------\n");
BNX_PRINTF(sc, "IfHcInOctets = 0x%08X:%08X, "
"IfHcInBadOctets = 0x%08X:%08X\n",
sblk->stat_IfHCInOctets_hi, sblk->stat_IfHCInOctets_lo,
sblk->stat_IfHCInBadOctets_hi, sblk->stat_IfHCInBadOctets_lo);
BNX_PRINTF(sc, "IfHcOutOctets = 0x%08X:%08X, "
"IfHcOutBadOctets = 0x%08X:%08X\n",
sblk->stat_IfHCOutOctets_hi, sblk->stat_IfHCOutOctets_lo,
sblk->stat_IfHCOutBadOctets_hi, sblk->stat_IfHCOutBadOctets_lo);
BNX_PRINTF(sc, "IfHcInUcastPkts = 0x%08X:%08X, "
"IfHcInMulticastPkts = 0x%08X:%08X\n",
sblk->stat_IfHCInUcastPkts_hi, sblk->stat_IfHCInUcastPkts_lo,
sblk->stat_IfHCInMulticastPkts_hi,
sblk->stat_IfHCInMulticastPkts_lo);
BNX_PRINTF(sc, "IfHcInBroadcastPkts = 0x%08X:%08X, "
"IfHcOutUcastPkts = 0x%08X:%08X\n",
sblk->stat_IfHCInBroadcastPkts_hi,
sblk->stat_IfHCInBroadcastPkts_lo,
sblk->stat_IfHCOutUcastPkts_hi,
sblk->stat_IfHCOutUcastPkts_lo);
BNX_PRINTF(sc, "IfHcOutMulticastPkts = 0x%08X:%08X, "
"IfHcOutBroadcastPkts = 0x%08X:%08X\n",
sblk->stat_IfHCOutMulticastPkts_hi,
sblk->stat_IfHCOutMulticastPkts_lo,
sblk->stat_IfHCOutBroadcastPkts_hi,
sblk->stat_IfHCOutBroadcastPkts_lo);
if (sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors)
BNX_PRINTF(sc, "0x%08X : "
"emac_tx_stat_dot3statsinternalmactransmiterrors\n",
sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors);
if (sblk->stat_Dot3StatsCarrierSenseErrors)
BNX_PRINTF(sc, "0x%08X : Dot3StatsCarrierSenseErrors\n",
sblk->stat_Dot3StatsCarrierSenseErrors);
if (sblk->stat_Dot3StatsFCSErrors)
BNX_PRINTF(sc, "0x%08X : Dot3StatsFCSErrors\n",
sblk->stat_Dot3StatsFCSErrors);
if (sblk->stat_Dot3StatsAlignmentErrors)
BNX_PRINTF(sc, "0x%08X : Dot3StatsAlignmentErrors\n",
sblk->stat_Dot3StatsAlignmentErrors);
if (sblk->stat_Dot3StatsSingleCollisionFrames)
BNX_PRINTF(sc, "0x%08X : Dot3StatsSingleCollisionFrames\n",
sblk->stat_Dot3StatsSingleCollisionFrames);
if (sblk->stat_Dot3StatsMultipleCollisionFrames)
BNX_PRINTF(sc, "0x%08X : Dot3StatsMultipleCollisionFrames\n",
sblk->stat_Dot3StatsMultipleCollisionFrames);
if (sblk->stat_Dot3StatsDeferredTransmissions)
BNX_PRINTF(sc, "0x%08X : Dot3StatsDeferredTransmissions\n",
sblk->stat_Dot3StatsDeferredTransmissions);
if (sblk->stat_Dot3StatsExcessiveCollisions)
BNX_PRINTF(sc, "0x%08X : Dot3StatsExcessiveCollisions\n",
sblk->stat_Dot3StatsExcessiveCollisions);
if (sblk->stat_Dot3StatsLateCollisions)
BNX_PRINTF(sc, "0x%08X : Dot3StatsLateCollisions\n",
sblk->stat_Dot3StatsLateCollisions);
if (sblk->stat_EtherStatsCollisions)
BNX_PRINTF(sc, "0x%08X : EtherStatsCollisions\n",
sblk->stat_EtherStatsCollisions);
if (sblk->stat_EtherStatsFragments)
BNX_PRINTF(sc, "0x%08X : EtherStatsFragments\n",
sblk->stat_EtherStatsFragments);
if (sblk->stat_EtherStatsJabbers)
BNX_PRINTF(sc, "0x%08X : EtherStatsJabbers\n",
sblk->stat_EtherStatsJabbers);
if (sblk->stat_EtherStatsUndersizePkts)
BNX_PRINTF(sc, "0x%08X : EtherStatsUndersizePkts\n",
sblk->stat_EtherStatsUndersizePkts);
if (sblk->stat_EtherStatsOverrsizePkts)
BNX_PRINTF(sc, "0x%08X : EtherStatsOverrsizePkts\n",
sblk->stat_EtherStatsOverrsizePkts);
if (sblk->stat_EtherStatsPktsRx64Octets)
BNX_PRINTF(sc, "0x%08X : EtherStatsPktsRx64Octets\n",
sblk->stat_EtherStatsPktsRx64Octets);
if (sblk->stat_EtherStatsPktsRx65Octetsto127Octets)
BNX_PRINTF(sc, "0x%08X : EtherStatsPktsRx65Octetsto127Octets\n",
sblk->stat_EtherStatsPktsRx65Octetsto127Octets);
if (sblk->stat_EtherStatsPktsRx128Octetsto255Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsRx128Octetsto255Octets\n",
sblk->stat_EtherStatsPktsRx128Octetsto255Octets);
if (sblk->stat_EtherStatsPktsRx256Octetsto511Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsRx256Octetsto511Octets\n",
sblk->stat_EtherStatsPktsRx256Octetsto511Octets);
if (sblk->stat_EtherStatsPktsRx512Octetsto1023Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsRx512Octetsto1023Octets\n",
sblk->stat_EtherStatsPktsRx512Octetsto1023Octets);
if (sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsRx1024Octetsto1522Octets\n",
sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets);
if (sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsRx1523Octetsto9022Octets\n",
sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets);
if (sblk->stat_EtherStatsPktsTx64Octets)
BNX_PRINTF(sc, "0x%08X : EtherStatsPktsTx64Octets\n",
sblk->stat_EtherStatsPktsTx64Octets);
if (sblk->stat_EtherStatsPktsTx65Octetsto127Octets)
BNX_PRINTF(sc, "0x%08X : EtherStatsPktsTx65Octetsto127Octets\n",
sblk->stat_EtherStatsPktsTx65Octetsto127Octets);
if (sblk->stat_EtherStatsPktsTx128Octetsto255Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsTx128Octetsto255Octets\n",
sblk->stat_EtherStatsPktsTx128Octetsto255Octets);
if (sblk->stat_EtherStatsPktsTx256Octetsto511Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsTx256Octetsto511Octets\n",
sblk->stat_EtherStatsPktsTx256Octetsto511Octets);
if (sblk->stat_EtherStatsPktsTx512Octetsto1023Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsTx512Octetsto1023Octets\n",
sblk->stat_EtherStatsPktsTx512Octetsto1023Octets);
if (sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsTx1024Octetsto1522Octets\n",
sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets);
if (sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets)
BNX_PRINTF(sc, "0x%08X : "
"EtherStatsPktsTx1523Octetsto9022Octets\n",
sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets);
if (sblk->stat_XonPauseFramesReceived)
BNX_PRINTF(sc, "0x%08X : XonPauseFramesReceived\n",
sblk->stat_XonPauseFramesReceived);
if (sblk->stat_XoffPauseFramesReceived)
BNX_PRINTF(sc, "0x%08X : XoffPauseFramesReceived\n",
sblk->stat_XoffPauseFramesReceived);
if (sblk->stat_OutXonSent)
BNX_PRINTF(sc, "0x%08X : OutXonSent\n",
sblk->stat_OutXonSent);
if (sblk->stat_OutXoffSent)
BNX_PRINTF(sc, "0x%08X : OutXoffSent\n",
sblk->stat_OutXoffSent);
if (sblk->stat_FlowControlDone)
BNX_PRINTF(sc, "0x%08X : FlowControlDone\n",
sblk->stat_FlowControlDone);
if (sblk->stat_MacControlFramesReceived)
BNX_PRINTF(sc, "0x%08X : MacControlFramesReceived\n",
sblk->stat_MacControlFramesReceived);
if (sblk->stat_XoffStateEntered)
BNX_PRINTF(sc, "0x%08X : XoffStateEntered\n",
sblk->stat_XoffStateEntered);
if (sblk->stat_IfInFramesL2FilterDiscards)
BNX_PRINTF(sc, "0x%08X : IfInFramesL2FilterDiscards\n",
sblk->stat_IfInFramesL2FilterDiscards);
if (sblk->stat_IfInRuleCheckerDiscards)
BNX_PRINTF(sc, "0x%08X : IfInRuleCheckerDiscards\n",
sblk->stat_IfInRuleCheckerDiscards);
if (sblk->stat_IfInFTQDiscards)
BNX_PRINTF(sc, "0x%08X : IfInFTQDiscards\n",
sblk->stat_IfInFTQDiscards);
if (sblk->stat_IfInMBUFDiscards)
BNX_PRINTF(sc, "0x%08X : IfInMBUFDiscards\n",
sblk->stat_IfInMBUFDiscards);
if (sblk->stat_IfInRuleCheckerP4Hit)
BNX_PRINTF(sc, "0x%08X : IfInRuleCheckerP4Hit\n",
sblk->stat_IfInRuleCheckerP4Hit);
if (sblk->stat_CatchupInRuleCheckerDiscards)
BNX_PRINTF(sc, "0x%08X : CatchupInRuleCheckerDiscards\n",
sblk->stat_CatchupInRuleCheckerDiscards);
if (sblk->stat_CatchupInFTQDiscards)
BNX_PRINTF(sc, "0x%08X : CatchupInFTQDiscards\n",
sblk->stat_CatchupInFTQDiscards);
if (sblk->stat_CatchupInMBUFDiscards)
BNX_PRINTF(sc, "0x%08X : CatchupInMBUFDiscards\n",
sblk->stat_CatchupInMBUFDiscards);
if (sblk->stat_CatchupInRuleCheckerP4Hit)
BNX_PRINTF(sc, "0x%08X : CatchupInRuleCheckerP4Hit\n",
sblk->stat_CatchupInRuleCheckerP4Hit);
BNX_PRINTF(sc,
"-----------------------------"
"--------------"
"-----------------------------\n");
}
void
bnx_dump_driver_state(struct bnx_softc *sc)
{
BNX_PRINTF(sc,
"-----------------------------"
" Driver State "
"-----------------------------\n");
BNX_PRINTF(sc, "%p - (sc) driver softc structure virtual "
"address\n", sc);
BNX_PRINTF(sc, "%p - (sc->status_block) status block virtual address\n",
sc->status_block);
BNX_PRINTF(sc, "%p - (sc->stats_block) statistics block virtual "
"address\n", sc->stats_block);
BNX_PRINTF(sc, "%p - (sc->tx_bd_chain) tx_bd chain virtual "
"adddress\n", sc->tx_bd_chain);
BNX_PRINTF(sc, "%p - (sc->rx_bd_chain) rx_bd chain virtual address\n",
sc->rx_bd_chain);
BNX_PRINTF(sc, "%p - (sc->tx_mbuf_ptr) tx mbuf chain virtual address\n",
sc->tx_mbuf_ptr);
BNX_PRINTF(sc, "%p - (sc->rx_mbuf_ptr) rx mbuf chain virtual address\n",
sc->rx_mbuf_ptr);
BNX_PRINTF(sc,
" 0x%08X - (sc->interrupts_generated) h/w intrs\n",
sc->interrupts_generated);
BNX_PRINTF(sc,
" 0x%08X - (sc->rx_interrupts) rx interrupts handled\n",
sc->rx_interrupts);
BNX_PRINTF(sc,
" 0x%08X - (sc->tx_interrupts) tx interrupts handled\n",
sc->tx_interrupts);
BNX_PRINTF(sc,
" 0x%08X - (sc->last_status_idx) status block index\n",
sc->last_status_idx);
BNX_PRINTF(sc, " 0x%08X - (sc->tx_prod) tx producer index\n",
sc->tx_prod);
BNX_PRINTF(sc, " 0x%08X - (sc->tx_cons) tx consumer index\n",
sc->tx_cons);
BNX_PRINTF(sc,
" 0x%08X - (sc->tx_prod_bseq) tx producer bseq index\n",
sc->tx_prod_bseq);
BNX_PRINTF(sc, " 0x%08X - (sc->rx_prod) rx producer index\n",
sc->rx_prod);
BNX_PRINTF(sc, " 0x%08X - (sc->rx_cons) rx consumer index\n",
sc->rx_cons);
BNX_PRINTF(sc,
" 0x%08X - (sc->rx_prod_bseq) rx producer bseq index\n",
sc->rx_prod_bseq);
BNX_PRINTF(sc,
" 0x%08X - (sc->rx_mbuf_alloc) rx mbufs allocated\n",
sc->rx_mbuf_alloc);
BNX_PRINTF(sc, " 0x%08X - (sc->free_rx_bd) free rx_bd's\n",
sc->free_rx_bd);
BNX_PRINTF(sc,
"0x%08X/%08X - (sc->rx_low_watermark) rx low watermark\n",
sc->rx_low_watermark, (u_int32_t) USABLE_RX_BD);
BNX_PRINTF(sc,
" 0x%08X - (sc->txmbuf_alloc) tx mbufs allocated\n",
sc->tx_mbuf_alloc);
BNX_PRINTF(sc,
" 0x%08X - (sc->rx_mbuf_alloc) rx mbufs allocated\n",
sc->rx_mbuf_alloc);
BNX_PRINTF(sc, " 0x%08X - (sc->used_tx_bd) used tx_bd's\n",
sc->used_tx_bd);
BNX_PRINTF(sc, "0x%08X/%08X - (sc->tx_hi_watermark) tx hi watermark\n",
sc->tx_hi_watermark, (u_int32_t) USABLE_TX_BD);
BNX_PRINTF(sc,
" 0x%08X - (sc->mbuf_alloc_failed) failed mbuf alloc\n",
sc->mbuf_alloc_failed);
BNX_PRINTF(sc, "-------------------------------------------"
"-----------------------------\n");
}
void
bnx_dump_hw_state(struct bnx_softc *sc)
{
u_int32_t val1;
int i;
BNX_PRINTF(sc,
"----------------------------"
" Hardware State "
"----------------------------\n");
BNX_PRINTF(sc, "0x%08X : bootcode version\n", sc->bnx_fw_ver);
val1 = REG_RD(sc, BNX_MISC_ENABLE_STATUS_BITS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) misc_enable_status_bits\n",
val1, BNX_MISC_ENABLE_STATUS_BITS);
val1 = REG_RD(sc, BNX_DMA_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) dma_status\n", val1, BNX_DMA_STATUS);
val1 = REG_RD(sc, BNX_CTX_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) ctx_status\n", val1, BNX_CTX_STATUS);
val1 = REG_RD(sc, BNX_EMAC_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) emac_status\n", val1,
BNX_EMAC_STATUS);
val1 = REG_RD(sc, BNX_RPM_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) rpm_status\n", val1, BNX_RPM_STATUS);
val1 = REG_RD(sc, BNX_TBDR_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) tbdr_status\n", val1,
BNX_TBDR_STATUS);
val1 = REG_RD(sc, BNX_TDMA_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) tdma_status\n", val1,
BNX_TDMA_STATUS);
val1 = REG_RD(sc, BNX_HC_STATUS);
BNX_PRINTF(sc, "0x%08X : (0x%04X) hc_status\n", val1, BNX_HC_STATUS);
BNX_PRINTF(sc,
"----------------------------"
"----------------"
"----------------------------\n");
BNX_PRINTF(sc,
"----------------------------"
" Register Dump "
"----------------------------\n");
for (i = 0x400; i < 0x8000; i += 0x10)
BNX_PRINTF(sc, "0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
i, REG_RD(sc, i), REG_RD(sc, i + 0x4),
REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC));
BNX_PRINTF(sc,
"----------------------------"
"----------------"
"----------------------------\n");
}
void
bnx_breakpoint(struct bnx_softc *sc)
{
/* Unreachable code to shut the compiler up about unused functions. */
if (0) {
bnx_dump_txbd(sc, 0, NULL);
bnx_dump_rxbd(sc, 0, NULL);
bnx_dump_tx_mbuf_chain(sc, 0, USABLE_TX_BD);
bnx_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD);
bnx_dump_l2fhdr(sc, 0, NULL);
bnx_dump_tx_chain(sc, 0, USABLE_TX_BD);
bnx_dump_rx_chain(sc, 0, USABLE_RX_BD);
bnx_dump_status_block(sc);
bnx_dump_stats_block(sc);
bnx_dump_driver_state(sc);
bnx_dump_hw_state(sc);
}
bnx_dump_driver_state(sc);
/* Print the important status block fields. */
bnx_dump_status_block(sc);
#if 0
/* Call the debugger. */
breakpoint();
#endif
return;
}
#endif
![[BACK]](/icons/back.gif){kind=icon}
Return to if_bnx.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / dev / pci