Return to cy82c693reg.h CVS log | Up to [local] / sys / dev / pci |
File: [local] / sys / dev / pci / cy82c693reg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:12:54 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: cy82c693reg.h,v 1.1 2000/06/09 17:10:58 chris Exp $ */ /* $NetBSD: cy82c693reg.h,v 1.1 2000/06/06 03:07:39 thorpej Exp $ */ /*- * Copyright (c) 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_PCI_CY82C693REG_H_ #define _DEV_PCI_CY82C693REG_H_ /* * Register definitions for the Cypress 82c693 hyperCache(tm) Stand-Alone * PCI Peripheral Controller with USB. */ #define CYHC_CONFIG_ADDR 0x22 /* Chipset Configuration Address */ #define CYHC_CONFIG_DATA 0x23 /* Chipset Configuration Data */ #define CONFIG_PERIPH1 0x01 /* Peripheral Control #1 */ #define CONFIG_PERIPH2 0x02 /* Peripheral Control #2 */ #define CONFIG_ELCR1 0x03 /* Edge/Level Control #1 */ #define CONFIG_ELCR2 0x04 /* Edge/Level Control #2 */ #define CONFIG_RTC 0x05 /* RTC Configuration */ #endif /* _DEV_PCI_CY82C693REG_H_ */