File: [local] / sys / dev / pci / auixpreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:12:52 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: auixpreg.h,v 1.1 2005/08/07 20:08:45 mickey Exp $ */
/* $NetBSD: auixpreg.h,v 1.2 2005/01/12 00:28:03 reinoud Exp $ */
/*
* Copyright (c) 2004, 2005 Reinoud Zandijk <reinoud@netbsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* NetBSD audio driver for ATI IXP-{150,200,...} audio driver hardware.
*
* Thanks are due to Takashi Iwai for the constants.
*/
#define ATI_IXP_CODECS 3
typedef struct atiixp_dma_desc {
u_int32_t addr; /* DMA buffer address */
u_int16_t status; /* status bits; function unknown */
u_int16_t size; /* size of this DMA packet in dwords */
u_int32_t next; /* phys pointer to next packet descriptor */
} __packed atiixp_dma_desc_t;
#define ATI_REG_ISR 0x00 /* interrupt source */
#define ATI_REG_ISR_IN_XRUN (1U<<0)
#define ATI_REG_ISR_IN_STATUS (1U<<1)
#define ATI_REG_ISR_OUT_XRUN (1U<<2)
#define ATI_REG_ISR_OUT_STATUS (1U<<3)
#define ATI_REG_ISR_SPDF_XRUN (1U<<4)
#define ATI_REG_ISR_SPDF_STATUS (1U<<5)
#define ATI_REG_ISR_PHYS_INTR (1U<<8)
#define ATI_REG_ISR_PHYS_MISMATCH (1U<<9)
#define ATI_REG_ISR_CODEC0_NOT_READY (1U<<10)
#define ATI_REG_ISR_CODEC1_NOT_READY (1U<<11)
#define ATI_REG_ISR_CODEC2_NOT_READY (1U<<12)
#define ATI_REG_ISR_NEW_FRAME (1U<<13)
#define ATI_REG_IER 0x04 /* interrupt enable */
#define ATI_REG_IER_IN_XRUN_EN (1U<<0)
#define ATI_REG_IER_IO_STATUS_EN (1U<<1)
#define ATI_REG_IER_OUT_XRUN_EN (1U<<2)
#define ATI_REG_IER_OUT_XRUN_COND (1U<<3)
#define ATI_REG_IER_SPDF_XRUN_EN (1U<<4)
#define ATI_REG_IER_SPDF_STATUS_EN (1U<<5)
#define ATI_REG_IER_PHYS_INTR_EN (1U<<8)
#define ATI_REG_IER_PHYS_MISMATCH_EN (1U<<9)
#define ATI_REG_IER_CODEC0_INTR_EN (1U<<10)
#define ATI_REG_IER_CODEC1_INTR_EN (1U<<11)
#define ATI_REG_IER_CODEC2_INTR_EN (1U<<12)
#define ATI_REG_IER_NEW_FRAME_EN (1U<<13) /* (RO) */
#define ATI_REG_IER_SET_BUS_BUSY (1U<<14) /* (WO) audio is running */
#define ATI_REG_CMD 0x08 /* command */
#define ATI_REG_CMD_POWERDOWN (1U<<0)
#define ATI_REG_CMD_RECEIVE_EN (1U<<1)
#define ATI_REG_CMD_SEND_EN (1U<<2)
#define ATI_REG_CMD_STATUS_MEM (1U<<3)
#define ATI_REG_CMD_SPDF_OUT_EN (1U<<4)
#define ATI_REG_CMD_SPDF_STATUS_MEM (1U<<5)
#define ATI_REG_CMD_SPDF_THRESHOLD (3U<<6)
#define ATI_REG_CMD_SPDF_THRESHOLD_SHIFT 6
#define ATI_REG_CMD_IN_DMA_EN (1U<<8)
#define ATI_REG_CMD_OUT_DMA_EN (1U<<9)
#define ATI_REG_CMD_SPDF_DMA_EN (1U<<10)
#define ATI_REG_CMD_SPDF_OUT_STOPPED (1U<<11)
#define ATI_REG_CMD_SPDF_CONFIG_MASK (7U<<12)
#define ATI_REG_CMD_SPDF_CONFIG_34 (1U<<12)
#define ATI_REG_CMD_SPDF_CONFIG_78 (2U<<12)
#define ATI_REG_CMD_SPDF_CONFIG_69 (3U<<12)
#define ATI_REG_CMD_SPDF_CONFIG_01 (4U<<12)
#define ATI_REG_CMD_INTERLEAVE_SPDF (1U<<16)
#define ATI_REG_CMD_AUDIO_PRESENT (1U<<20)
#define ATI_REG_CMD_INTERLEAVE_IN (1U<<21)
#define ATI_REG_CMD_INTERLEAVE_OUT (1U<<22)
#define ATI_REG_CMD_LOOPBACK_EN (1U<<23)
#define ATI_REG_CMD_PACKED_DIS (1U<<24)
#define ATI_REG_CMD_BURST_EN (1U<<25)
#define ATI_REG_CMD_PANIC_EN (1U<<26)
#define ATI_REG_CMD_MODEM_PRESENT (1U<<27)
#define ATI_REG_CMD_ACLINK_ACTIVE (1U<<28)
#define ATI_REG_CMD_AC_SOFT_RESET (1U<<29)
#define ATI_REG_CMD_AC_SYNC (1U<<30)
#define ATI_REG_CMD_AC_RESET (1U<<31)
#define ATI_REG_PHYS_OUT_ADDR 0x0c
#define ATI_REG_PHYS_OUT_CODEC_MASK (3U<<0)
#define ATI_REG_PHYS_OUT_RW (1U<<2)
#define ATI_REG_PHYS_OUT_ADDR_EN (1U<<8)
#define ATI_REG_PHYS_OUT_ADDR_SHIFT 9
#define ATI_REG_PHYS_OUT_DATA_SHIFT 16
#define ATI_REG_PHYS_IN_ADDR 0x10
#define ATI_REG_PHYS_IN_READ_FLAG (1U<<8)
#define ATI_REG_PHYS_IN_ADDR_SHIFT 9
#define ATI_REG_PHYS_IN_DATA_SHIFT 16
#define ATI_REG_SLOTREQ 0x14
#define ATI_REG_COUNTER 0x18
#define ATI_REG_COUNTER_SLOT (3U<<0) /* slot # */
#define ATI_REG_COUNTER_BITCLOCK (31U<<8)
#define ATI_REG_IN_FIFO_THRESHOLD 0x1c
#define ATI_REG_IN_DMA_LINKPTR 0x20
#define ATI_REG_IN_DMA_DT_START 0x24 /* RO */
#define ATI_REG_IN_DMA_DT_NEXT 0x28 /* RO */
#define ATI_REG_IN_DMA_DT_CUR 0x2c /* RO */
#define ATI_REG_IN_DMA_DT_SIZE 0x30
#define ATI_REG_OUT_DMA_SLOT 0x34
#define ATI_REG_OUT_DMA_SLOT_BIT(x) (1U << ((x) - 3))
#define ATI_REG_OUT_DMA_SLOT_MASK 0x1ff
#define ATI_REG_OUT_DMA_THRESHOLD_MASK 0xf800
#define ATI_REG_OUT_DMA_THRESHOLD_SHIFT 11
#define ATI_REG_OUT_DMA_LINKPTR 0x38
#define ATI_REG_OUT_DMA_DT_START 0x3c /* RO */
#define ATI_REG_OUT_DMA_DT_NEXT 0x40 /* RO */
#define ATI_REG_OUT_DMA_DT_CUR 0x44 /* RO */
#define ATI_REG_OUT_DMA_DT_SIZE 0x48
#define ATI_REG_SPDF_CMD 0x4c
#define ATI_REG_SPDF_CMD_LFSR (1U<<4)
#define ATI_REG_SPDF_CMD_SINGLE_CH (1U<<5)
#define ATI_REG_SPDF_CMD_LFSR_ACC (0xff<<8) /* RO */
#define ATI_REG_SPDF_DMA_LINKPTR 0x50
#define ATI_REG_SPDF_DMA_DT_START 0x54 /* RO */
#define ATI_REG_SPDF_DMA_DT_NEXT 0x58 /* RO */
#define ATI_REG_SPDF_DMA_DT_CUR 0x5c /* RO */
#define ATI_REG_SPDF_DMA_DT_SIZE 0x60
#define ATI_REG_MODEM_MIRROR 0x7c
#define ATI_REG_AUDIO_MIRROR 0x80
#define ATI_REG_6CH_REORDER 0x84 /* reorder slots for 6ch */
#define ATI_REG_6CH_REORDER_EN (1U<<0) /* 3,4,7,8,6,9 -> 3,4,6,9,7,8 */
#define ATI_REG_FIFO_FLUSH 0x88
#define ATI_REG_FIFO_OUT_FLUSH (1U<<0)
#define ATI_REG_FIFO_IN_FLUSH (1U<<1)
/* LINKPTR */
#define ATI_REG_LINKPTR_EN (1U<<0)
/* [INT|OUT|SPDIF]_DMA_DT_SIZE */
#define ATI_REG_DMA_DT_SIZE (0xffffU<<0)
#define ATI_REG_DMA_FIFO_USED (0x1fU<<16)
#define ATI_REG_DMA_FIFO_FREE (0x1fU<<21)
#define ATI_REG_DMA_STATE (7U<<26)