Return to txphyreg.h CVS log | Up to [local] / sys / dev / mii |
File: [local] / sys / dev / mii / txphyreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:12:49 2008 UTC (16 years, 3 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: txphyreg.h,v 1.3 2003/10/22 09:39:29 jmc Exp $ */ /* * Copyright (c) 1999 Jason L. Wright (jason@thought.net) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_MII_TXPHYREG_H_ #define _DEV_MII_TXPHYREG_H_ /* * Texas Instruments TNETE2101 registers. */ #define MII_TXPHY_ID 0x10 /* PHY identifier */ #define MII_TXPHY_CTL 0x11 /* PHY control */ #define TXCTL_IGLINK 0x8000 /* ignore link */ #define TXCTL_SWAPOL 0x4000 /* swap polarity */ #define TXCTL_MANCONF 0x2000 /* manual configuration */ #define TXCTL_SQEEN 0x1000 /* SQE enable */ #define TXCTL_MTEST 0x0800 /* manufacturing test */ #define TXCTL_FIBER 0x0400 /* 100BaseFX mode */ #define TXCTL_FEFEN 0x0200 /* far-end fault indication enable */ #define TXCTL_NOENDEC 0x0100 /* no encode/decode */ #define TXCTL_NOALIGN 0x0080 /* no symbol alignment */ #define TXCTL_DUPONLY 0x0040 /* duplex LED only */ #define TXCTL_REPEATER 0x0020 /* repeater mode enable */ #define TXCTL_RXRESET 0x0010 /* 100baseTX rx reset */ #define TXCTL_NOLINKP 0x0008 /* disable link pulse tx */ #define TXCTL_NFEW 0x0004 /* no far end wrap */ #define TXCTL_INTEN 0x0002 /* interrupt enable */ #define TXCTL_TINT 0x0001 /* test interrupt */ #define MII_TXPHY_STS 0x12 /* PHY status */ #define TXSTS_MINT 0x8000 /* mii interrupt */ #define TXSTS_PHOK 0x4000 /* power high ok */ #define TXSTS_PLOK 0x2000 /* polarity ok */ #define TXSTS_TPENERGY 0x1000 /* TP energy detect */ #define TXSTS_SYNCLOSS 0x0800 /* 100btx rx descrambler sync loss */ #define TXSTS_FEFI 0x0400 /* Far-end fault indication */ #endif /* _DEV_MII_MTDPHYREG_H_ */