Return to tlphyreg.h CVS log | Up to [local] / sys / dev / mii |
File: [local] / sys / dev / mii / tlphyreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:12:49 2008 UTC (16 years, 3 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: tlphyreg.h,v 1.2 2002/05/04 11:30:06 fgsch Exp $ */ /* $NetBSD: tlphyreg.h,v 1.1 1998/08/10 23:59:58 thorpej Exp $ */ /* * Copyright (c) 1997 Manuel Bouyer. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_MII_TLPHYREG_H_ #define _DEV_MII_TLPHYREG_H_ /* * Registers for the TI ThunderLAN internal PHY. */ #define MII_TLPHY_ID 0x10 /* ThunderLAN PHY ID */ #define ID_10BASETAUI 0x0001 /* 10baseT/AUI PHY */ #define MII_TLPHY_CTRL 0x11 /* Control regiseter */ #define CTRL_ILINK 0x8000 /* Ignore link */ #define CTRL_SWPOL 0x4000 /* swap polarity */ #define CTRL_AUISEL 0x2000 /* Select AUI */ #define CTRL_SQEEN 0x1000 /* Enable SQE */ #define CTRL_NFEW 0x0004 /* Not far end wrap */ #define CTRL_INTEN 0x0002 /* Interrupts enable */ #define CTRL_TINT 0x0001 /* Test Interrupts */ #define MII_TLPHY_ST 0x12 /* Status register */ #define ST_MII_INT 0x8000 /* MII interrupt */ #define ST_PHOK 0x4000 /* Power high OK */ #define ST_POLOK 0x2000 /* Polarity OK */ #define ST_TPE 0x1000 /* Twisted pair energy */ #endif /* _DEV_MII_TLPHYREG_H_ */