Annotation of sys/dev/mii/rgephyreg.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: rgephyreg.h,v 1.2 2004/10/28 23:37:11 pvalchev Exp $ */
2: /*
3: * Copyright (c) 2003
4: * Bill Paul <wpaul@windriver.com>. All rights reserved.
5: *
6: * Redistribution and use in source and binary forms, with or without
7: * modification, are permitted provided that the following conditions
8: * are met:
9: * 1. Redistributions of source code must retain the above copyright
10: * notice, this list of conditions and the following disclaimer.
11: * 2. Redistributions in binary form must reproduce the above copyright
12: * notice, this list of conditions and the following disclaimer in the
13: * documentation and/or other materials provided with the distribution.
14: * 3. All advertising materials mentioning features or use of this software
15: * must display the following acknowledgement:
16: * This product includes software developed by Bill Paul.
17: * 4. Neither the name of the author nor the names of any co-contributors
18: * may be used to endorse or promote products derived from this software
19: * without specific prior written permission.
20: *
21: * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
22: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24: * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
25: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31: * THE POSSIBILITY OF SUCH DAMAGE.
32: *
33: * $FreeBSD: rgephyreg.h,v 1.1 2003/09/11 03:53:46 wpaul Exp $
34: */
35:
36: #ifndef _DEV_MII_RGEPHYREG_H_
37: #define _DEV_MII_RGEPHYREG_H_
38:
39: /*
40: * RealTek 8169S/8110S gigE PHY registers
41: */
42:
43: #define RGEPHY_MII_BMCR 0x00
44: #define RGEPHY_BMCR_RESET 0x8000
45: #define RGEPHY_BMCR_LOOP 0x4000
46: #define RGEPHY_BMCR_SPD0 0x2000 /* speed select, lower bit */
47: #define RGEPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */
48: #define RGEPHY_BMCR_PDOWN 0x0800 /* Power down */
49: #define RGEPHY_BMCR_ISO 0x0400 /* Isolate */
50: #define RGEPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */
51: #define RGEPHY_BMCR_FDX 0x0100 /* Duplex mode */
52: #define RGEPHY_BMCR_CTEST 0x0080 /* Collision test enable */
53: #define RGEPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */
54:
55: #define RGEPHY_S1000 RGEPHY_BMCR_SPD1 /* 1000mbps */
56: #define RGEPHY_S100 RGEPHY_BMCR_SPD0 /* 100mpbs */
57: #define RGEPHY_S10 0 /* 10mbps */
58:
59: #define RGEPHY_MII_BMSR 0x01
60: #define RGEPHY_BMSR_100T4 0x8000 /* 100 base T4 capable */
61: #define RGEPHY_BMSR_100TXFDX 0x4000 /* 100 base Tx full duplex capable */
62: #define RGEPHY_BMSR_100TXHDX 0x2000 /* 100 base Tx half duplex capable */
63: #define RGEPHY_BMSR_10TFDX 0x1000 /* 10 base T full duplex capable */
64: #define RGEPHY_BMSR_10THDX 0x0800 /* 10 base T half duplex capable */
65: #define RGEPHY_BMSR_100T2FDX 0x0400 /* 100 base T2 full duplex capable */
66: #define RGEPHY_BMSR_100T2HDX 0x0200 /* 100 base T2 half duplex capable */
67: #define RGEPHY_BMSR_EXTSTS 0x0100 /* Extended status present */
68: #define RGEPHY_BMSR_PRESUB 0x0040 /* Preamble surpression */
69: #define RGEPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */
70: #define RGEPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occured */
71: #define RGEPHY_BMSR_ANEG 0x0008 /* Autoneg capable */
72: #define RGEPHY_BMSR_LINK 0x0004 /* Link status */
73: #define RGEPHY_BMSR_JABBER 0x0002 /* Jabber detected */
74: #define RGEPHY_BMSR_EXT 0x0001 /* Extended capability */
75:
76: #define RGEPHY_MII_ANAR 0x04
77: #define RGEPHY_ANAR_NP 0x8000 /* Next page */
78: #define RGEPHY_ANAR_RF 0x2000 /* Remote fault */
79: #define RGEPHY_ANAR_ASP 0x0800 /* Asymmetric Pause */
80: #define RGEPHY_ANAR_PC 0x0400 /* Pause capable */
81: #define RGEPHY_ANAR_T4 0x0200 /* local device supports 100bT4 */
82: #define RGEPHY_ANAR_TX_FD 0x0100 /* local device supports 100bTx FD */
83: #define RGEPHY_ANAR_TX 0x0080 /* local device supports 100bTx */
84: #define RGEPHY_ANAR_10_FD 0x0040 /* local device supports 10bT FD */
85: #define RGEPHY_ANAR_10 0x0020 /* local device supports 10bT */
86: #define RGEPHY_ANAR_SEL 0x001F /* selector field, 00001=Ethernet */
87:
88: #define RGEPHY_MII_ANLPAR 0x05
89: #define RGEPHY_ANLPAR_NP 0x8000 /* Next page */
90: #define RGEPHY_ANLPAR_RF 0x2000 /* Remote fault */
91: #define RGEPHY_ANLPAR_ASP 0x0800 /* Asymmetric Pause */
92: #define RGEPHY_ANLPAR_PC 0x0400 /* Pause capable */
93: #define RGEPHY_ANLPAR_T4 0x0200 /* link partner supports 100bT4 */
94: #define RGEPHY_ANLPAR_TX_FD 0x0100 /* link partner supports 100bTx FD */
95: #define RGEPHY_ANLPAR_TX 0x0080 /* link partner supports 100bTx */
96: #define RGEPHY_ANLPAR_10_FD 0x0040 /* link partner supports 10bT FD */
97: #define RGEPHY_ANLPAR_10 0x0020 /* link partner supports 10bT */
98: #define RGEPHY_ANLPAR_SEL 0x001F /* selector field, 00001=Ethernet */
99:
100: #define RGEPHY_SEL_TYPE 0x0001 /* ethernet */
101:
102: #define RGEPHY_MII_ANER 0x06
103: #define RGEPHY_ANER_PDF 0x0010 /* Parallel detection fault */
104: #define RGEPHY_ANER_LPNP 0x0008 /* Link partner can next page */
105: #define RGEPHY_ANER_NP 0x0004 /* Local PHY can next page */
106: #define RGEPHY_ANER_RX 0x0002 /* Next page received */
107: #define RGEPHY_ANER_LPAN 0x0001 /* Link partner autoneg capable */
108:
109: #define RGEPHY_MII_NEXTP 0x07 /* Next page */
110:
111: #define RGEPHY_MII_NEXTP_LP 0x08 /* Next page of link partner */
112:
113: #define RGEPHY_MII_1000CTL 0x09 /* 1000baseT control */
114: #define RGEPHY_1000CTL_TST 0xE000 /* test modes */
115: #define RGEPHY_1000CTL_MSE 0x1000 /* Master/Slave manual enable */
116: #define RGEPHY_1000CTL_MSC 0x0800 /* Master/Slave select */
117: #define RGEPHY_1000CTL_RD 0x0400 /* Repeater/DTE */
118: #define RGEPHY_1000CTL_AFD 0x0200 /* Advertise full duplex */
119: #define RGEPHY_1000CTL_AHD 0x0100 /* Advertise half duplex */
120:
121: #define RGEPHY_TEST_TX_JITTER 0x2000
122: #define RGEPHY_TEST_TX_JITTER_MASTER_MODE 0x4000
123: #define RGEPHY_TEST_TX_JITTER_SLAVE_MODE 0x6000
124: #define RGEPHY_TEST_TX_DISTORTION 0x8000
125:
126: #define RGEPHY_MII_1000STS 0x0A /* 1000baseT status */
127: #define RGEPHY_1000STS_MSF 0x8000 /* Master/slave fault */
128: #define RGEPHY_1000STS_MSR 0x4000 /* Master/slave result */
129: #define RGEPHY_1000STS_LRS 0x2000 /* Local receiver status */
130: #define RGEPHY_1000STS_RRS 0x1000 /* Remote receiver status */
131: #define RGEPHY_1000STS_LPFD 0x0800 /* Link partner can FD */
132: #define RGEPHY_1000STS_LPHD 0x0400 /* Link partner can HD */
133: #define RGEPHY_1000STS_IEC 0x00FF /* Idle error count */
134:
135: #define RGEPHY_MII_EXTSTS 0x0F /* Extended status */
136: #define RGEPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */
137: #define RGEPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */
138: #define RGEPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */
139: #define RGEPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */
140:
141:
142:
143: #endif /* _DEV_RGEPHY_MIIREG_H_ */
CVSweb