Annotation of sys/dev/mii/rgephyreg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: rgephyreg.h,v 1.2 2004/10/28 23:37:11 pvalchev Exp $ */
! 2: /*
! 3: * Copyright (c) 2003
! 4: * Bill Paul <wpaul@windriver.com>. All rights reserved.
! 5: *
! 6: * Redistribution and use in source and binary forms, with or without
! 7: * modification, are permitted provided that the following conditions
! 8: * are met:
! 9: * 1. Redistributions of source code must retain the above copyright
! 10: * notice, this list of conditions and the following disclaimer.
! 11: * 2. Redistributions in binary form must reproduce the above copyright
! 12: * notice, this list of conditions and the following disclaimer in the
! 13: * documentation and/or other materials provided with the distribution.
! 14: * 3. All advertising materials mentioning features or use of this software
! 15: * must display the following acknowledgement:
! 16: * This product includes software developed by Bill Paul.
! 17: * 4. Neither the name of the author nor the names of any co-contributors
! 18: * may be used to endorse or promote products derived from this software
! 19: * without specific prior written permission.
! 20: *
! 21: * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
! 22: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 23: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 24: * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
! 25: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 26: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 27: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 28: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 29: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 30: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
! 31: * THE POSSIBILITY OF SUCH DAMAGE.
! 32: *
! 33: * $FreeBSD: rgephyreg.h,v 1.1 2003/09/11 03:53:46 wpaul Exp $
! 34: */
! 35:
! 36: #ifndef _DEV_MII_RGEPHYREG_H_
! 37: #define _DEV_MII_RGEPHYREG_H_
! 38:
! 39: /*
! 40: * RealTek 8169S/8110S gigE PHY registers
! 41: */
! 42:
! 43: #define RGEPHY_MII_BMCR 0x00
! 44: #define RGEPHY_BMCR_RESET 0x8000
! 45: #define RGEPHY_BMCR_LOOP 0x4000
! 46: #define RGEPHY_BMCR_SPD0 0x2000 /* speed select, lower bit */
! 47: #define RGEPHY_BMCR_AUTOEN 0x1000 /* Autoneg enabled */
! 48: #define RGEPHY_BMCR_PDOWN 0x0800 /* Power down */
! 49: #define RGEPHY_BMCR_ISO 0x0400 /* Isolate */
! 50: #define RGEPHY_BMCR_STARTNEG 0x0200 /* Restart autoneg */
! 51: #define RGEPHY_BMCR_FDX 0x0100 /* Duplex mode */
! 52: #define RGEPHY_BMCR_CTEST 0x0080 /* Collision test enable */
! 53: #define RGEPHY_BMCR_SPD1 0x0040 /* Speed select, upper bit */
! 54:
! 55: #define RGEPHY_S1000 RGEPHY_BMCR_SPD1 /* 1000mbps */
! 56: #define RGEPHY_S100 RGEPHY_BMCR_SPD0 /* 100mpbs */
! 57: #define RGEPHY_S10 0 /* 10mbps */
! 58:
! 59: #define RGEPHY_MII_BMSR 0x01
! 60: #define RGEPHY_BMSR_100T4 0x8000 /* 100 base T4 capable */
! 61: #define RGEPHY_BMSR_100TXFDX 0x4000 /* 100 base Tx full duplex capable */
! 62: #define RGEPHY_BMSR_100TXHDX 0x2000 /* 100 base Tx half duplex capable */
! 63: #define RGEPHY_BMSR_10TFDX 0x1000 /* 10 base T full duplex capable */
! 64: #define RGEPHY_BMSR_10THDX 0x0800 /* 10 base T half duplex capable */
! 65: #define RGEPHY_BMSR_100T2FDX 0x0400 /* 100 base T2 full duplex capable */
! 66: #define RGEPHY_BMSR_100T2HDX 0x0200 /* 100 base T2 half duplex capable */
! 67: #define RGEPHY_BMSR_EXTSTS 0x0100 /* Extended status present */
! 68: #define RGEPHY_BMSR_PRESUB 0x0040 /* Preamble surpression */
! 69: #define RGEPHY_BMSR_ACOMP 0x0020 /* Autoneg complete */
! 70: #define RGEPHY_BMSR_RFAULT 0x0010 /* Remote fault condition occured */
! 71: #define RGEPHY_BMSR_ANEG 0x0008 /* Autoneg capable */
! 72: #define RGEPHY_BMSR_LINK 0x0004 /* Link status */
! 73: #define RGEPHY_BMSR_JABBER 0x0002 /* Jabber detected */
! 74: #define RGEPHY_BMSR_EXT 0x0001 /* Extended capability */
! 75:
! 76: #define RGEPHY_MII_ANAR 0x04
! 77: #define RGEPHY_ANAR_NP 0x8000 /* Next page */
! 78: #define RGEPHY_ANAR_RF 0x2000 /* Remote fault */
! 79: #define RGEPHY_ANAR_ASP 0x0800 /* Asymmetric Pause */
! 80: #define RGEPHY_ANAR_PC 0x0400 /* Pause capable */
! 81: #define RGEPHY_ANAR_T4 0x0200 /* local device supports 100bT4 */
! 82: #define RGEPHY_ANAR_TX_FD 0x0100 /* local device supports 100bTx FD */
! 83: #define RGEPHY_ANAR_TX 0x0080 /* local device supports 100bTx */
! 84: #define RGEPHY_ANAR_10_FD 0x0040 /* local device supports 10bT FD */
! 85: #define RGEPHY_ANAR_10 0x0020 /* local device supports 10bT */
! 86: #define RGEPHY_ANAR_SEL 0x001F /* selector field, 00001=Ethernet */
! 87:
! 88: #define RGEPHY_MII_ANLPAR 0x05
! 89: #define RGEPHY_ANLPAR_NP 0x8000 /* Next page */
! 90: #define RGEPHY_ANLPAR_RF 0x2000 /* Remote fault */
! 91: #define RGEPHY_ANLPAR_ASP 0x0800 /* Asymmetric Pause */
! 92: #define RGEPHY_ANLPAR_PC 0x0400 /* Pause capable */
! 93: #define RGEPHY_ANLPAR_T4 0x0200 /* link partner supports 100bT4 */
! 94: #define RGEPHY_ANLPAR_TX_FD 0x0100 /* link partner supports 100bTx FD */
! 95: #define RGEPHY_ANLPAR_TX 0x0080 /* link partner supports 100bTx */
! 96: #define RGEPHY_ANLPAR_10_FD 0x0040 /* link partner supports 10bT FD */
! 97: #define RGEPHY_ANLPAR_10 0x0020 /* link partner supports 10bT */
! 98: #define RGEPHY_ANLPAR_SEL 0x001F /* selector field, 00001=Ethernet */
! 99:
! 100: #define RGEPHY_SEL_TYPE 0x0001 /* ethernet */
! 101:
! 102: #define RGEPHY_MII_ANER 0x06
! 103: #define RGEPHY_ANER_PDF 0x0010 /* Parallel detection fault */
! 104: #define RGEPHY_ANER_LPNP 0x0008 /* Link partner can next page */
! 105: #define RGEPHY_ANER_NP 0x0004 /* Local PHY can next page */
! 106: #define RGEPHY_ANER_RX 0x0002 /* Next page received */
! 107: #define RGEPHY_ANER_LPAN 0x0001 /* Link partner autoneg capable */
! 108:
! 109: #define RGEPHY_MII_NEXTP 0x07 /* Next page */
! 110:
! 111: #define RGEPHY_MII_NEXTP_LP 0x08 /* Next page of link partner */
! 112:
! 113: #define RGEPHY_MII_1000CTL 0x09 /* 1000baseT control */
! 114: #define RGEPHY_1000CTL_TST 0xE000 /* test modes */
! 115: #define RGEPHY_1000CTL_MSE 0x1000 /* Master/Slave manual enable */
! 116: #define RGEPHY_1000CTL_MSC 0x0800 /* Master/Slave select */
! 117: #define RGEPHY_1000CTL_RD 0x0400 /* Repeater/DTE */
! 118: #define RGEPHY_1000CTL_AFD 0x0200 /* Advertise full duplex */
! 119: #define RGEPHY_1000CTL_AHD 0x0100 /* Advertise half duplex */
! 120:
! 121: #define RGEPHY_TEST_TX_JITTER 0x2000
! 122: #define RGEPHY_TEST_TX_JITTER_MASTER_MODE 0x4000
! 123: #define RGEPHY_TEST_TX_JITTER_SLAVE_MODE 0x6000
! 124: #define RGEPHY_TEST_TX_DISTORTION 0x8000
! 125:
! 126: #define RGEPHY_MII_1000STS 0x0A /* 1000baseT status */
! 127: #define RGEPHY_1000STS_MSF 0x8000 /* Master/slave fault */
! 128: #define RGEPHY_1000STS_MSR 0x4000 /* Master/slave result */
! 129: #define RGEPHY_1000STS_LRS 0x2000 /* Local receiver status */
! 130: #define RGEPHY_1000STS_RRS 0x1000 /* Remote receiver status */
! 131: #define RGEPHY_1000STS_LPFD 0x0800 /* Link partner can FD */
! 132: #define RGEPHY_1000STS_LPHD 0x0400 /* Link partner can HD */
! 133: #define RGEPHY_1000STS_IEC 0x00FF /* Idle error count */
! 134:
! 135: #define RGEPHY_MII_EXTSTS 0x0F /* Extended status */
! 136: #define RGEPHY_EXTSTS_X_FD_CAP 0x8000 /* 1000base-X FD capable */
! 137: #define RGEPHY_EXTSTS_X_HD_CAP 0x4000 /* 1000base-X HD capable */
! 138: #define RGEPHY_EXTSTS_T_FD_CAP 0x2000 /* 1000base-T FD capable */
! 139: #define RGEPHY_EXTSTS_T_HD_CAP 0x1000 /* 1000base-T HD capable */
! 140:
! 141:
! 142:
! 143: #endif /* _DEV_RGEPHY_MIIREG_H_ */
CVSweb