Annotation of sys/dev/mii/nsphyterreg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: nsphyterreg.h,v 1.1 1999/12/07 22:33:43 jason Exp $ */
! 2: /* $NetBSD: nsphyterreg.h,v 1.1 1999/12/07 19:36:37 thorpej Exp $ */
! 3:
! 4: /*-
! 5: * Copyright (c) 1999 The NetBSD Foundation, Inc.
! 6: * All rights reserved.
! 7: *
! 8: * This code is derived from software contributed to The NetBSD Foundation
! 9: * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
! 10: * NASA Ames Research Center.
! 11: *
! 12: * Redistribution and use in source and binary forms, with or without
! 13: * modification, are permitted provided that the following conditions
! 14: * are met:
! 15: * 1. Redistributions of source code must retain the above copyright
! 16: * notice, this list of conditions and the following disclaimer.
! 17: * 2. Redistributions in binary form must reproduce the above copyright
! 18: * notice, this list of conditions and the following disclaimer in the
! 19: * documentation and/or other materials provided with the distribution.
! 20: * 3. All advertising materials mentioning features or use of this software
! 21: * must display the following acknowledgement:
! 22: * This product includes software developed by the NetBSD
! 23: * Foundation, Inc. and its contributors.
! 24: * 4. Neither the name of The NetBSD Foundation nor the names of its
! 25: * contributors may be used to endorse or promote products derived
! 26: * from this software without specific prior written permission.
! 27: *
! 28: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
! 29: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
! 30: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
! 31: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
! 32: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 33: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 34: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 35: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 36: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 37: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
! 38: * POSSIBILITY OF SUCH DAMAGE.
! 39: */
! 40:
! 41: #ifndef _DEV_MII_NSPHYTERREG_H_
! 42: #define _DEV_MII_NSPHYTERREG_H_
! 43:
! 44: /*
! 45: * DP83843 registers.
! 46: */
! 47:
! 48: #define MII_NSPHYTER_PHYSTS 0x10 /* PHY status */
! 49: #define PHYSTS_REL 0x8000 /* receive error latch */
! 50: #define PHYSTS_CIML 0x4000 /* CIM latch */
! 51: #define PHYSTS_FCSL 0x2000 /* false carrier sense latch */
! 52: #define PHYSTS_DEVRDY 0x0800 /* device ready */
! 53: #define PHYSTS_PGRX 0x0400 /* page received */
! 54: #define PHYSTS_ANEGEN 0x0200 /* autoneg. enabled */
! 55: #define PHYSTS_MIIINTR 0x0100 /* MII interrupt */
! 56: #define PHYSTS_REMFAULT 0x0080 /* remote fault */
! 57: #define PHYSTS_JABBER 0x0040 /* jabber detect */
! 58: #define PHYSTS_NWAYCOMP 0x0020 /* NWAY complete */
! 59: #define PHYSTS_RESETSTAT 0x0010 /* reset status */
! 60: #define PHYSTS_LOOPBACK 0x0008 /* loopback status */
! 61: #define PHYSTS_DUPLEX 0x0004 /* full duplex */
! 62: #define PHYSTS_SPEED10 0x0002 /* speed == 10Mb/s */
! 63: #define PHYSTS_LINK 0x0001 /* link up */
! 64:
! 65:
! 66: #define MII_NSPHYTER_MIPSCR 0x11 /* MII interrupt PHY specific
! 67: control */
! 68:
! 69: #define MIPSCR_INTEN 0x0002 /* interrupt enable */
! 70: #define MIPSCR_TINT 0x0001 /* test interrupt */
! 71:
! 72:
! 73: #define MII_NSPHYTER_MIPGSR 0x12 /* MII interrupt PHY generic
! 74: status */
! 75: #define MIPGSR_MINT 0x8000 /* MII interrupt pending */
! 76:
! 77: #define MII_NSPHYTER_DCR 0x13 /* Disconnect counter */
! 78:
! 79: #define MII_NSPHYTER_FCSCR 0x14 /* False carrier sense counter */
! 80:
! 81: #define MII_NSPHYTER_RECR 0x15 /* Receive error counter */
! 82:
! 83:
! 84: #define MII_NSPHYTER_PCSR 0x16 /* PCS configuration and status */
! 85: #define PCSR_SINGLE_SD 0x8000 /* single-ended SD mode */
! 86: #define PCSR_FEFI_EN 0x4000 /* far end fault indication mode */
! 87: #define PCSR_DESCR_TO_RST 0x2000 /* reset descrambler timeout counter */
! 88: #define PCSR_DESCR_TO_SEL 0x1000 /* descrambler timer mode */
! 89: #define PCSR_DESCR_TO_DIS 0x0800 /* descrambler timer disable */
! 90: #define PCSR_LD_SCR_SD 0x0400 /* load scrambler seed */
! 91: #define PCSR_TX_QUIET 0x0200 /* 100Mb/s transmit true quiet mode */
! 92: #define PCSR_TX_PATTERN 0x0180 /* 100Mb/s transmit test pattern */
! 93: #define PCSR_F_LINK_100 0x0040 /* force good link in 100Mb/s */
! 94: #define PCSR_CIM_DIS 0x0020 /* carrier integrity monitor disable */
! 95: #define PCSR_CIM_STATUS 0x0010 /* carrier integrity monitor status */
! 96: #define PCSR_CODE_ERR 0x0008 /* code errors */
! 97: #define PCSR_PME_ERR 0x0004 /* premature end errors */
! 98: #define PCSR_LINK_ERR 0x0002 /* link errors */
! 99: #define PCSR_PKT_ERR 0x0001 /* packet errors */
! 100:
! 101:
! 102: #define MII_NSPHYTER_LBR 0x17 /* loopback and bypass */
! 103: #define LBR_BP_STRETCH 0x4000 /* bypass LED stretching */
! 104: #define LBR_BP_4B5B 0x2000 /* bypass encoding/decoding */
! 105: #define LBR_BP_SCR 0x1000 /* bypass scrambler/descrambler */
! 106: #define LBR_BP_RX 0x0800 /* bypass receive function */
! 107: #define LBR_BP_TX 0x0400 /* bypass transmit function */
! 108: #define LBR_100_DP_CTL 0x0380 /* 100Mb/s data patch control */
! 109: #define LBR_TW_LBEN 0x0020 /* TWISTER loopback enable */
! 110: #define LBR_10_ENDEC_LB 0x0010 /* 10Mb/s ENDEC loopback */
! 111:
! 112:
! 113: #define MII_NSPHYTER_10BTSCR 0x18 /* 10baseT status and control */
! 114: #define BTSCR_AUI_TPI 0x2000 /* TREX operating mode */
! 115: #define BTSCR_RX_SERIAL 0x1000 /* 10baseT RX serial mode */
! 116: #define BTSCR_TX_SERIAL 0x0800 /* 10baseT TX serial mode */
! 117: #define BTSCR_POL_DS 0x0400 /* polarity detection and correction
! 118: disable */
! 119: #define BTSCR_AUTOSW_EN 0x0200 /* AUI/TPI autoswitch */
! 120: #define BTSCR_LP_DS 0x0100 /* link pulse disable */
! 121: #define BTSCR_HB_DS 0x0080 /* heartbeat disabled */
! 122: #define BTSCR_LS_SEL 0x0040 /* low squelch select */
! 123: #define BTSCR_AUI_SEL 0x0020 /* AUI select */
! 124: #define BTSCR_JAB_DS 0x0010 /* jabber disable */
! 125: #define BTSCR_THIN_SEL 0x0008 /* thin ethernet select */
! 126: #define BTSCR_TX_FILT_DS 0x0004 /* TPI receive filter disable */
! 127:
! 128:
! 129: #define MII_NSPHYTER_PHYCTRL 0x19 /* PHY control */
! 130: #define PHYCTRL_TW_EQSEL 0x3000 /* TWISTER e.q. select */
! 131: #define PHYCTRL_BLW_DS 0x0800 /* TWISTER base line wander disable */
! 132: #define PHYCTRL_REPEATER 0x0200 /* repeater mode */
! 133: #define PHYCTRL_LED_TXRX_MODE 0x0180 /* LED TX/RX mode */
! 134: #define PHYCTRL_LED_DUP_MODE 0x0040 /* LED DUP mode */
! 135: #define PHYCTRL_FX_EN 0x0020 /* Fiber mode enable */
! 136: #define PHYCTRL_PHYADDR 0x001f /* PHY address */
! 137:
! 138: #endif /* _DEV_MII_NSPHYTERREG_H_ */
CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to nsphyterreg.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / dev / mii