Annotation of sys/dev/mii/nsgphyreg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: nsgphyreg.h,v 1.5 2005/05/27 09:24:01 brad Exp $ */
! 2: /*
! 3: * Copyright (c) 2001 Wind River Systems
! 4: * Copyright (c) 2001
! 5: * Bill Paul <wpaul@bsdi.com>. All rights reserved.
! 6: *
! 7: * Redistribution and use in source and binary forms, with or without
! 8: * modification, are permitted provided that the following conditions
! 9: * are met:
! 10: * 1. Redistributions of source code must retain the above copyright
! 11: * notice, this list of conditions and the following disclaimer.
! 12: * 2. Redistributions in binary form must reproduce the above copyright
! 13: * notice, this list of conditions and the following disclaimer in the
! 14: * documentation and/or other materials provided with the distribution.
! 15: * 3. All advertising materials mentioning features or use of this software
! 16: * must display the following acknowledgement:
! 17: * This product includes software developed by Bill Paul.
! 18: * 4. Neither the name of the author nor the names of any co-contributors
! 19: * may be used to endorse or promote products derived from this software
! 20: * without specific prior written permission.
! 21: *
! 22: * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
! 23: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 24: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 25: * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
! 26: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 27: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 28: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 29: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 30: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 31: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
! 32: * THE POSSIBILITY OF SUCH DAMAGE.
! 33: *
! 34: * $FreeBSD: /usr/local/www/cvsroot/FreeBSD/src/sys/dev/mii/nsgphyreg.h,v 1.3 2002/04/29 11:57:28 phk Exp $
! 35: */
! 36:
! 37: #ifndef _DEV_MII_NSGPHYREG_H_
! 38: #define _DEV_MII_NSGPHYREG_H_
! 39:
! 40: /*
! 41: * NatSemi DP83891 registers
! 42: */
! 43:
! 44: #define NSGPHY_MII_STRAPOPT 0x10 /* Strap options */
! 45: #define NSGPHY_STRAPOPT_PHYADDR 0xF800 /* PHY address */
! 46: #define NSGPHY_STRAPOPT_COMPAT 0x0400 /* Broadcom compat mode */
! 47: #define NSGPHY_STRAPOPT_MMSE 0x0200 /* Manual master/slave enable */
! 48: #define NSGPHY_STRAPOPT_ANEG 0x0100 /* Autoneg enable */
! 49: #define NSGPHY_STRAPOPT_MMSV 0x0080 /* Manual master/slave setting */
! 50: #define NSGPHY_STRAPOPT_1000HDX 0x0010 /* Advertise 1000 half-duplex */
! 51: #define NSGPHY_STRAPOPT_1000FDX 0x0008 /* Advertise 1000 full-duplex */
! 52: #define NSGPHY_STRAPOPT_100_ADV 0x0004 /* Advertise 100 full/half-duplex */
! 53: #define NSGPHY_STRAPOPT_SPEED1 0x0002 /* speed selection */
! 54: #define NSGPHY_STRAPOPT_SPEED0 0x0001 /* speed selection */
! 55: #define NSGPHY_STRAPOPT_SPDSEL (NSGPHY_STRAPOPT_SPEED1|NSGPHY_STRAPOPT_SPEED0)
! 56:
! 57: #define NSGPHY_MII_PHYSUP 0x11 /* PHY support/current status */
! 58: #define PHY_SUP_SPEED1 0x0010 /* speed bit 1 */
! 59: #define PHY_SUP_SPEED0 0x0008 /* speed bit 1 */
! 60: #define NSGPHY_PHYSUP_SPEED1 0x0010 /* speed status */
! 61: #define NSGPHY_PHYSUP_SPEED0 0x0008 /* speed status */
! 62: #define NSGPHY_PHYSUP_SPDSTS (NSGPHY_PHYSUP_SPEED1|NSGPHY_PHYSUP_SPEED0)
! 63: #define NSGPHY_PHYSUP_LNKSTS 0x0004 /* link status */
! 64: #define PHY_SUP_LINK 0x0004 /* link status */
! 65: #define PHY_SUP_DUPLEX 0x0002 /* 1 == full-duplex */
! 66: #define NSGPHY_PHYSUP_DUPSTS 0x0002 /* duplex status 1 == full */
! 67: #define NSGPHY_PHYSUP_10BT 0x0001 /* 10baseT resolved */
! 68:
! 69: #define NSGPHY_SPDSTS_1000 0x0010
! 70: #define NSGPHY_SPDSTS_100 0x0008
! 71: #define NSGPHY_SPDSTS_10 0x0000
! 72:
! 73: #endif /* _DEV_NSGPHY_MIIREG_H_ */
CVSweb