Return to iophyreg.h CVS log

Up to [local] / sys / dev / mii

Annotation of sys/dev/mii/iophyreg.h, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: iophyreg.h,v 1.1 1999/10/12 16:59:29 jason Exp $      */
        !             2: /*     $NetBSD: iophyreg.h,v 1.2 1999/09/16 05:58:18 soren Exp $       */
        !             3:
        !             4: /*
        !             5:  * Copyright (c) 1998, 1999 Soren S. Jorvang.
        !             6:  * All rights reserved.
        !             7:  *
        !             8:  * Redistribution and use in source and binary forms, with or without
        !             9:  * modification, are permitted provided that the following conditions
        !            10:  * are met:
        !            11:  * 1. Redistributions of source code must retain the above copyright
        !            12:  *    notice, this list of conditions, and the following disclaimer.
        !            13:  * 2. Redistributions in binary form must reproduce the above copyright
        !            14:  *    notice, this list of conditions and the following disclaimer in the
        !            15:  *    documentation and/or other materials provided with the distribution.
        !            16:  *
        !            17:  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
        !            18:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
        !            19:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
        !            20:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
        !            21:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
        !            22:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
        !            23:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
        !            24:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
        !            25:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
        !            26:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
        !            27:  * SUCH DAMAGE.
        !            28:  */
        !            29:
        !            30: #ifndef _DEV_MII_IOPHYREG_H_
        !            31: #define        _DEV_MII_IOPHYREG_H_
        !            32:
        !            33: /*
        !            34:  * Intel 82553 PHY registers
        !            35:  */
        !            36:
        !            37: #define        MII_IOPHY_EXT0          0x10    /* Extended Register 0 */
        !            38: #define        EXT0_JABDIS             0x8000  /* jabber disabled */
        !            39: #define        EXT0_LINKDIS            0x4000  /* link integrity disable */
        !            40: #define        EXT0_TEST4              0x2000
        !            41: #define        EXT0_TEST3              0x1000
        !            42: #define        EXT0_TEST2              0x0800
        !            43: #define        EXT0_TEST1              0x0400
        !            44: #define        EXT0_TEST0              0x0200
        !            45: #define        EXT0_FORCE100           0x0100  /* force 100 Mbps operation */
        !            46: #define        EXT0_REVMASK            0x00e0  /* 82553 chip revision */
        !            47: #define        EXT0_HSQ                0x0010
        !            48: #define        EXT0_LSQ                0x0008
        !            49: #define        EXT0_WAKEUP             0x0004  /* disable auto power-down */
        !            50: #define        EXT0_SPEED              0x0002  /* current speed 10/100 */
        !            51: #define        EXT0_DUPLEX             0x0001  /* current duplex setting */
        !            52:
        !            53: #define        MII_IOPHY_EXT1          0x14    /* Extended Register 1 */
        !            54: #define        EXT1_PAIR_SKEW_ERR      0x8000  /* pair skew error */
        !            55: #define        EXT1_DC_BALANCE_ERR     0x4000  /* DC balance error */
        !            56: #define        EXT1_INVALID_CODE_ERR   0x2000  /* invalid code error */
        !            57: #define        EXT1_BAD_CODE_ERR       0x1000  /* bad code error */
        !            58: #define        EXT1_EOP_ERR            0x0800  /* EOP error */
        !            59: #define        EXT1_MANCHESTER_ERR     0x0400  /* Manchester code error */
        !            60: #define        EXT1_CH2_EOF_ERR        0x0200  /* channel 2 EOF detection error */
        !            61: #define        EXT1_DTE_MODE_SEL       0x0100  /* external DTE mode */
        !            62: #define        EXT1_LINE_RPTR_MODE_SEL 0x0080  /* line repeater mode */
        !            63: #define        EXT1_EXT_TEST_MODE_SEL  0x0040  /* external test mode */
        !            64: #define        EXT1_MII_RPTR_MODE_SEL  0x0020  /* MII repeater mode */
        !            65: #define        EXT1_CH2_POLARITY_ERR   0x0010  /* channel 2 polarity error */
        !            66: #define        EXT1_CH3_POLARITY_ERR   0x0008  /* channel 3 polarity error */
        !            67: #define        EXT1_CH4_POLARITY_ERR   0x0004  /* channel 4 polarity error */
        !            68: #define        EXT1_CH2_SFD_DETECT_ERR 0x0002  /* channel 2 SFD not found */
        !            69:
        !            70: #define        MII_IOPHY_EXT2          0x15    /* Extended Register 2 (C step only) */
        !            71: #define        EXT2_AUTONEG_SEL        0x8000  /* autonegotiation selected */
        !            72: #define        EXT2_CH3_SFD_ERR        0x4000  /* channel 3 SFD not found */
        !            73: #define        EXT2_CH4_SFD_ERR        0x2000  /* channel 4 SFD not found */
        !            74:
        !            75: #endif /* _DEV_MII_IOPHYREG_H_ */