Return to icsphyreg.h CVS log

Up to [local] / sys / dev / mii

Annotation of sys/dev/mii/icsphyreg.h, Revision 1.1.1.1

1.1       nbrk        1: /*     $OpenBSD: icsphyreg.h,v 1.2 1999/03/09 00:02:44 jason Exp $     */
                      2: /*     $NetBSD: icsphyreg.h,v 1.1 1998/11/02 23:46:20 thorpej Exp $    */
                      3:
                      4: /*-
                      5:  * Copyright (c) 1998 The NetBSD Foundation, Inc.
                      6:  * All rights reserved.
                      7:  *
                      8:  * This code is derived from software contributed to The NetBSD Foundation
                      9:  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
                     10:  * NASA Ames Research Center.
                     11:  *
                     12:  * Redistribution and use in source and binary forms, with or without
                     13:  * modification, are permitted provided that the following conditions
                     14:  * are met:
                     15:  * 1. Redistributions of source code must retain the above copyright
                     16:  *    notice, this list of conditions and the following disclaimer.
                     17:  * 2. Redistributions in binary form must reproduce the above copyright
                     18:  *    notice, this list of conditions and the following disclaimer in the
                     19:  *    documentation and/or other materials provided with the distribution.
                     20:  * 3. All advertising materials mentioning features or use of this software
                     21:  *    must display the following acknowledgement:
                     22:  *     This product includes software developed by the NetBSD
                     23:  *     Foundation, Inc. and its contributors.
                     24:  * 4. Neither the name of The NetBSD Foundation nor the names of its
                     25:  *    contributors may be used to endorse or promote products derived
                     26:  *    from this software without specific prior written permission.
                     27:  *
                     28:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
                     29:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
                     30:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
                     31:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
                     32:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     33:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     34:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     35:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     36:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     37:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     38:  * POSSIBILITY OF SUCH DAMAGE.
                     39:  */
                     40:
                     41: #ifndef _DEV_MII_ICSPHYREG_H_
                     42: #define        _DEV_MII_ICSPHYREG_H_
                     43:
                     44: /*
                     45:  * Register definitions for the ICS1890 Ethernet PHY
                     46:  * Further documentation can be found at:
                     47:  *     http://www.icst.com/products/pinfo/1890.htm
                     48:  */
                     49:
                     50: #define        MII_ICSPHY_ECR          0x10    /* Extended Control Register */
                     51: #define        ECR_OVR                 0x8000  /* disable command reg overwrites */
                     52: #define        ECR_PHYADDR_MASK        0x07c0  /* PHY address mask */
                     53: #define        ECR_CTEST               0x0020  /* Stream Cipher Test Mode */
                     54: #define        ECR_IECT                0x0004  /* Invalid Error Code Test */
                     55: #define        ECR_SSD                 0x0001  /* Stream Cipher Disable */
                     56:
                     57: #define        MII_ICSPHY_QPR          0x11    /* Quick Poll Register */
                     58: #define        QPR_SPEED               0x8000  /* 100Mbps */
                     59: #define        QPR_FDX                 0x4000  /* Full dupled */
                     60: #define        QPR_ANB2                0x2000  /* Autoneg monitor bit 2 */
                     61: #define        QPR_ANB1                0x1000  /* Autoneg monitor bit 1 */
                     62: #define        QPR_ANB0                0x0800  /* Autoneg monitor bit 0 */
                     63: #define        QPR_RXERR               0x0400  /* Receive signal lost */
                     64: #define        QPR_PLLERR              0x0200  /* PLL error */
                     65: #define        QPR_FCARR               0x0100  /* False carrier detected */
                     66: #define        QPR_INVALSYM            0x0080  /* Invalid Symbol Detected */
                     67: #define        QPR_HALT                0x0040  /* Halt Symbol Detected */
                     68: #define        QPR_PREEM               0x0020  /* Two Idle Symbols together */
                     69: #define        QPR_ACOMP               0x0010  /* Autonegotiation complete */
                     70: #define        QPR_JABBER              0x0004  /* Jabber detected */
                     71: #define        QPR_RFAULT              0x0002  /* Remote Fault */
                     72: #define        QPR_LINK                0x0001  /* Link */
                     73:
                     74: #define        MII_ICSPHY_TTR          0x12    /* 10baseT Operations Register */
                     75: #define        TTR_RJABBER             0x8000  /* Remote Jabber */
                     76: #define        TTR_POLARITY            0x4000  /* Polarity Reversed */
                     77: #define        TTR_NOJABBER            0x0020  /* Disable Jabber Check */
                     78: #define        TTR_LOOP                0x0010  /* Loopback mode */
                     79: #define        TTR_NOAPOLARITY         0x0008  /* Disable auto polarity correction */
                     80: #define        TTR_NOSQE               0x0004  /* Disable SQE check */
                     81: #define        TTR_NOLINK              0x0002  /* Disable Link check */
                     82: #define        TTR_NOSQUELCH           0x0001  /* Disable squelch */
                     83:
                     84: #define        MII_ICSPHY_ECR2         0x13    /* Extended Control Register 2 */
                     85: #define        ECR2_REPEATER           0x8000  /* Repeater Mode */
                     86: #define        ECR2_HWSW               0x4000  /* hw/sw config priority */
                     87: #define        ECR2_LPRF               0x2000  /* link partner supports rem fault */
                     88: #define        ECR2_FORCERF            0x0400  /* Force transmit of rem fault */
                     89: #define        ECR2_RFPUP              0x0010  /* Rem fault on power up */
                     90: #define        ECR2_Q10T               0x0004  /* Qualified 10baseT data */
                     91: #define        ECR2_10TPROT            0x0002  /* 10baseT protect */
                     92: #define        ECR2_AUTOPWRDN          0x0001  /* automatic power down */
                     93:
                     94: #endif /* _DEV_MII_ICSPHYREG_H_ */