Return to Makefile CVS log

Up to [local] / sys / dev / microcode / aic7xxx

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

# $OpenBSD: Makefile,v 1.11 2007/07/08 00:17:21 krw Exp $
# $FreeBSD: src/sys/dev/aic7xxx/Makefile,v 1.6 1999/08/28 00:41:22 peter Exp $

PROG=	aicasm

CSRCS=	aicasm.c aicasm_symbol.c
GENSRCS= aicasm_gram.c aicasm_scan.c aicasm_macro_gram.c aicasm_macro_scan.c

GENHDRS=	aicasm_gram.h aicasm_macro_gram.h

SRCS=	${GENSRCS} ${CSRCS}
CLEANFILES+= ${GENSRCS} ${GENHDRS} y.output
DPADD+=	${LIBL}
LDADD+=	-ll
CC=${HOSTCC}

# Correct path for kernel builds
# Don't rely on the kernel's .depend file
.ifdef MAKESRCPATH
.PATH: ${MAKESRCPATH}
DEPENDFILE=
.endif

CFLAGS+= -I. -I${.CURDIR}
YFLAGS= -d
LFLAGS+= ${.TARGET:M*macro*:S/$(.TARGET)/-olex.yy.c/} ${.TARGET:M*macro*:S/$(.TARGET)/-Pmm/}
NOMAN=	noman

.ifdef DEBUG
CFLAGS+= -DDEBUG -g
YFLAGS+= -t
LFLAGS+= -d
SEQFLAGS= -l seq.lst
.endif

microcode:	7xxx_headers 79xx_headers

aicasm_gram.c aicasm_gram.h: aicasm_gram.y
	${YACC} ${YFLAGS} $<
	@mv y.tab.c aicasm_gram.c
	@mv y.tab.h aicasm_gram.h

aicasm_macro_gram.c aicasm_macro_gram.h: aicasm_macro_gram.y
	${YACC} -pmm ${YFLAGS} $<
	@mv y.tab.c aicasm_macro_gram.c
	@mv y.tab.h aicasm_macro_gram.h

7xxx_headers:	aicasm aic7xxx.seq aic7xxx.reg
	${OBJDIR}./aicasm -I/sys ${SEQFLAGS} -r tempreg.h -o tempseq.h ${.CURDIR}/aic7xxx.seq
	grep OpenBSD: ${.CURDIR}/aic7xxx.seq | cat - tempseq.h > aic7xxx_seq.h
	grep OpenBSD: ${.CURDIR}/aic7xxx.reg | cat - tempreg.h > aic7xxx_reg.h
	mv aic7xxx_seq.h /sys/dev/microcode/aic7xxx/
	mv aic7xxx_reg.h /sys/dev/microcode/aic7xxx/
.ifdef DEBUG
	mv seq.lst /sys/dev/microcode/aic7xxx/seq7xxx.lst
.endif
	rm -f tempseq.h tempreg.h

79xx_headers:	aicasm aic79xx.seq aic79xx.reg
	${OBJDIR}./aicasm -I/sys ${SEQFLAGS} -r tempreg.h -o tempseq.h ${.CURDIR}/aic79xx.seq
	grep OpenBSD: ${.CURDIR}/aic79xx.seq | cat - tempseq.h > aic79xx_seq.h
	grep OpenBSD: ${.CURDIR}/aic79xx.reg | cat - tempreg.h > aic79xx_reg.h
	mv aic79xx_seq.h /sys/dev/microcode/aic7xxx/
	mv aic79xx_reg.h /sys/dev/microcode/aic7xxx/
.ifdef DEBUG
	mv seq.lst /sys/dev/microcode/aic7xxx/seq79xx.lst
.endif
	rm -f tempseq.h tempreg.h

.include <bsd.prog.mk>