Return to wssreg.h CVS log | Up to [local] / sys / dev / isa |
File: [local] / sys / dev / isa / wssreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:11:27 2008 UTC (16 years, 2 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: wssreg.h,v 1.4 2000/03/28 14:07:43 espie Exp $ */ /* $NetBSD: wssreg.h,v 1.3 1995/07/07 02:15:15 brezak Exp $ */ /* * Copyright (c) 1991-1993 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the Computer Systems * Engineering Group at Lawrence Berkeley Laboratory. * 4. Neither the name of the University nor of the Laboratory may be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * Copyright (c) 1993 Analog Devices Inc. All rights reserved */ /* * Macros to detect valid hardware configuration data. */ #define WSS_IRQ_VALID(irq) ((irq) == 5 || (irq) == 7 || (irq) == 9 || \ (irq) == 10 || (irq) == 11) #define WSS_DRQ_VALID(chan) ((chan) == 0 || (chan) == 1 || (chan) == 3) #define WSS_BASE_VALID(base) ((base) == 0x0530 || \ (base) == 0x0604 || \ (base) == 0x0e80 || \ (base) == 0x0f40) /* WSS registers */ #define WSS_CONFIG 0x00 /* write only */ #define WSS_STATUS 0x03 /* read only */ #define WSS_CODEC 0x04 /* ad1848 codec registers (0x04-0x07) */ #define WSS_NPORT 8 /* WSS status register bits */ #define WSS_16SLOT 0x80 #define WSS_IRQACTIVE 0x40 #define WSS_VERS 0x04 #define WSS_VERSMASK 0x3f