Return to files.isapnp CVS log

Up to [local] / sys / dev / isa

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

#	$OpenBSD: files.isapnp,v 1.28 2005/03/08 20:00:25 tdeval Exp $
#	$NetBSD: files.isapnp,v 1.7 1997/10/16 17:16:36 matt Exp $
#
# Config file and device description for machine-independent ISAPnP code.
# Included by ports that need it.

device	isapnp {[port = -1], [size = 0],
	     [iomem = -1], [iosiz = 0],
	     [irq = -1], [drq = -1]}

attach	isapnp at isa
file	dev/isa/isapnp.c		isapnp needs-flag
file	dev/isa/isapnpdebug.c		isapnp
file	dev/isa/isapnpres.c		isapnp

#
# MI PnP devices go here...
#

attach	mpu at isapnp with mpu_isapnp
file	dev/isa/mpu_isapnp.c		mpu & midi

#attach	com at isapnp with com_isapnp
#file	dev/isa/com_isapnp.c		com_isapnp

attach	wdc at isapnp with wdc_isapnp: isa_dma
file	dev/isa/wdc_isapnp.c		wdc_isapnp

attach	aha at isapnp with aha_isapnp

attach	aic at isapnp with aic_isapnp
file	dev/isa/aic_isapnp.c		aic_isapnp

attach	sb at isapnp with sb_isapnp
file	dev/isa/sb_isapnp.c		sb_isapnp needs-flag

attach	wss at isapnp with wss_isapnp
file	dev/isa/wss_isapnp.c		wss_isapnp needs-flag 
attach	ess at isapnp with ess_isapnp
file	dev/isa/ess_isapnp.c		ess_isapnp needs-flag
attach	gus at isapnp with gus_isapnp
file	dev/isa/gus_isapnp.c		gus_isapnp needs-flag 


attach	an at isapnp with an_isapnp
file	dev/isa/if_an_isapnp.c		an_isapnp

attach	le at isapnp with le_isapnp
file	dev/isa/if_le_isapnp.c		le_isapnp

attach	ep at isapnp with ep_isapnp
file	dev/isa/if_ep_isapnp.c		ep_isapnp

device	ef: isa_dma, ether, ifnet, ifmedia, mii
attach	ef at isapnp with ef_isapnp
file	dev/isa/if_ef_isapnp.c		ef_isapnp

attach	ne at isapnp with ne_isapnp: rtl80x9
file	dev/isa/if_ne_isapnp.c		ne_isapnp

attach	we at isapnp with we_isapnp

attach	rt at isapnp with rt_isapnp
file	dev/isa/rt_isapnp.c		rt_isapnp

# Yamaha OPL3-SA3
device	ym: audio, isa_dma, ad1848, auconv, midibus
attach	ym at isapnp with ym_isapnp
file	dev/isa/ym.c			ym_isapnp
file	dev/isa/ym_isapnp.c		ym_isapnp