Annotation of sys/dev/ic/xlreg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: xlreg.h,v 1.19 2004/05/30 23:49:39 brad Exp $ */
! 2:
! 3: /*
! 4: * Copyright (c) 1997, 1998
! 5: * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
! 6: *
! 7: * Redistribution and use in source and binary forms, with or without
! 8: * modification, are permitted provided that the following conditions
! 9: * are met:
! 10: * 1. Redistributions of source code must retain the above copyright
! 11: * notice, this list of conditions and the following disclaimer.
! 12: * 2. Redistributions in binary form must reproduce the above copyright
! 13: * notice, this list of conditions and the following disclaimer in the
! 14: * documentation and/or other materials provided with the distribution.
! 15: * 3. All advertising materials mentioning features or use of this software
! 16: * must display the following acknowledgement:
! 17: * This product includes software developed by Bill Paul.
! 18: * 4. Neither the name of the author nor the names of any co-contributors
! 19: * may be used to endorse or promote products derived from this software
! 20: * without specific prior written permission.
! 21: *
! 22: * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
! 23: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 24: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 25: * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
! 26: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 27: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 28: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 29: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 30: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 31: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
! 32: * THE POSSIBILITY OF SUCH DAMAGE.
! 33: *
! 34: * $FreeBSD: if_xlreg.h,v 1.26 2000/08/28 20:40:03 wpaul Exp $
! 35: */
! 36:
! 37: #define XL_EE_READ 0x0080 /* read, 5 bit address */
! 38: #define XL_EE_8BIT_READ 0x0200 /* read, 8 bit address */
! 39: #define XL_EE_WRITE 0x0040 /* write, 5 bit address */
! 40: #define XL_EE_ERASE 0x00c0 /* erase, 5 bit address */
! 41: #define XL_EE_EWEN 0x0030 /* erase, no data needed */
! 42: #define XL_EE_BUSY 0x8000
! 43:
! 44: #define XL_EE_EADDR0 0x00 /* station address, first word */
! 45: #define XL_EE_EADDR1 0x01 /* station address, next word, */
! 46: #define XL_EE_EADDR2 0x02 /* station address, last word */
! 47: #define XL_EE_PRODID 0x03 /* product ID code */
! 48: #define XL_EE_MDATA_DATE 0x04 /* manufacturing data, date */
! 49: #define XL_EE_MDATA_DIV 0x05 /* manufacturing data, division */
! 50: #define XL_EE_MDATA_PCODE 0x06 /* manufacturing data, product code */
! 51: #define XL_EE_MFG_ID 0x07
! 52: #define XL_EE_PCI_PARM 0x08
! 53: #define XL_EE_ROM_ONFO 0x09
! 54: #define XL_EE_OEM_ADR0 0x0A
! 55: #define XL_EE_OEM_ADR1 0x0B
! 56: #define XL_EE_OEM_ADR2 0x0C
! 57: #define XL_EE_SOFTINFO1 0x0D
! 58: #define XL_EE_COMPAT 0x0E
! 59: #define XL_EE_SOFTINFO2 0x0F
! 60: #define XL_EE_CAPS 0x10 /* capabilities word */
! 61: #define XL_EE_RSVD0 0x11
! 62: #define XL_EE_ICFG_0 0x12
! 63: #define XL_EE_ICFG_1 0x13
! 64: #define XL_EE_RSVD1 0x14
! 65: #define XL_EE_SOFTINFO3 0x15
! 66: #define XL_EE_RSVD_2 0x16
! 67:
! 68: /*
! 69: * Bits in the capabilities word
! 70: */
! 71: #define XL_CAPS_PNP 0x0001
! 72: #define XL_CAPS_FULL_DUPLEX 0x0002
! 73: #define XL_CAPS_LARGE_PKTS 0x0004
! 74: #define XL_CAPS_SLAVE_DMA 0x0008
! 75: #define XL_CAPS_SECOND_DMA 0x0010
! 76: #define XL_CAPS_FULL_BM 0x0020
! 77: #define XL_CAPS_FRAG_BM 0x0040
! 78: #define XL_CAPS_CRC_PASSTHRU 0x0080
! 79: #define XL_CAPS_TXDONE 0x0100
! 80: #define XL_CAPS_NO_TXLENGTH 0x0200
! 81: #define XL_CAPS_RX_REPEAT 0x0400
! 82: #define XL_CAPS_SNOOPING 0x0800
! 83: #define XL_CAPS_100MBPS 0x1000
! 84: #define XL_CAPS_PWRMGMT 0x2000
! 85:
! 86: #define XL_PACKET_SIZE 1540
! 87:
! 88: #define XL_MAX_FRAMELEN (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN)
! 89:
! 90: /*
! 91: * Register layouts.
! 92: */
! 93: #define XL_COMMAND 0x0E
! 94: #define XL_STATUS 0x0E
! 95:
! 96: #define XL_TX_STATUS 0x1B
! 97: #define XL_TX_FREE 0x1C
! 98: #define XL_DMACTL 0x20
! 99: #define XL_DOWNLIST_PTR 0x24
! 100: #define XL_DOWN_POLL 0x2D /* 3c90xB only */
! 101: #define XL_TX_FREETHRESH 0x2F
! 102: #define XL_UPLIST_PTR 0x38
! 103: #define XL_UPLIST_STATUS 0x30
! 104: #define XL_UP_POLL 0x3D /* 3c90xB only */
! 105:
! 106: #define XL_PKTSTAT_UP_STALLED 0x00002000
! 107: #define XL_PKTSTAT_UP_ERROR 0x00004000
! 108: #define XL_PKTSTAT_UP_CMPLT 0x00008000
! 109:
! 110: #define XL_DMACTL_DN_CMPLT_REQ 0x00000002
! 111: #define XL_DMACTL_DOWN_STALLED 0x00000004
! 112: #define XL_DMACTL_UP_CMPLT 0x00000008
! 113: #define XL_DMACTL_DOWN_CMPLT 0x00000010
! 114: #define XL_DMACTL_UP_RX_EARLY 0x00000020
! 115: #define XL_DMACTL_ARM_COUNTDOWN 0x00000040
! 116: #define XL_DMACTL_DOWN_INPROG 0x00000080
! 117: #define XL_DMACTL_COUNTER_SPEED 0x00000100
! 118: #define XL_DMACTL_DOWNDOWN_MODE 0x00000200
! 119: #define XL_DMACTL_TARGET_ABORT 0x40000000
! 120: #define XL_DMACTL_MASTER_ABORT 0x80000000
! 121:
! 122: /*
! 123: * Command codes. Some command codes require that we wait for
! 124: * the CMD_BUSY flag to clear. Those codes are marked as 'mustwait.'
! 125: */
! 126: #define XL_CMD_RESET 0x0000 /* mustwait */
! 127: #define XL_CMD_WINSEL 0x0800
! 128: #define XL_CMD_COAX_START 0x1000
! 129: #define XL_CMD_RX_DISABLE 0x1800
! 130: #define XL_CMD_RX_ENABLE 0x2000
! 131: #define XL_CMD_RX_RESET 0x2800 /* mustwait */
! 132: #define XL_CMD_UP_STALL 0x3000 /* mustwait */
! 133: #define XL_CMD_UP_UNSTALL 0x3001
! 134: #define XL_CMD_DOWN_STALL 0x3002 /* mustwait */
! 135: #define XL_CMD_DOWN_UNSTALL 0x3003
! 136: #define XL_CMD_RX_DISCARD 0x4000
! 137: #define XL_CMD_TX_ENABLE 0x4800
! 138: #define XL_CMD_TX_DISABLE 0x5000
! 139: #define XL_CMD_TX_RESET 0x5800 /* mustwait */
! 140: #define XL_CMD_INTR_FAKE 0x6000
! 141: #define XL_CMD_INTR_ACK 0x6800
! 142: #define XL_CMD_INTR_ENB 0x7000
! 143: #define XL_CMD_STAT_ENB 0x7800
! 144: #define XL_CMD_RX_SET_FILT 0x8000
! 145: #define XL_CMD_RX_SET_THRESH 0x8800
! 146: #define XL_CMD_TX_SET_THRESH 0x9000
! 147: #define XL_CMD_TX_SET_START 0x9800
! 148: #define XL_CMD_DMA_UP 0xA000
! 149: #define XL_CMD_DMA_STOP 0xA001
! 150: #define XL_CMD_STATS_ENABLE 0xA800
! 151: #define XL_CMD_STATS_DISABLE 0xB000
! 152: #define XL_CMD_COAX_STOP 0xB800
! 153:
! 154: #define XL_CMD_SET_TX_RECLAIM 0xC000 /* 3c905B only */
! 155: #define XL_CMD_RX_SET_HASH 0xC800 /* 3c905B only */
! 156:
! 157: #define XL_HASH_SET 0x0400
! 158: #define XL_HASHFILT_SIZE 256
! 159:
! 160: /*
! 161: * status codes
! 162: * Note that bits 15 to 13 indicate the currently visible register window
! 163: * which may be anything from 0 to 7.
! 164: */
! 165: #define XL_STAT_INTLATCH 0x0001 /* 0 */
! 166: #define XL_STAT_ADFAIL 0x0002 /* 1 */
! 167: #define XL_STAT_TX_COMPLETE 0x0004 /* 2 */
! 168: #define XL_STAT_TX_AVAIL 0x0008 /* 3 first generation */
! 169: #define XL_STAT_RX_COMPLETE 0x0010 /* 4 */
! 170: #define XL_STAT_RX_EARLY 0x0020 /* 5 */
! 171: #define XL_STAT_INTREQ 0x0040 /* 6 */
! 172: #define XL_STAT_STATSOFLOW 0x0080 /* 7 */
! 173: #define XL_STAT_DMADONE 0x0100 /* 8 first generation */
! 174: #define XL_STAT_LINKSTAT 0x0100 /* 8 3c509B */
! 175: #define XL_STAT_DOWN_COMPLETE 0x0200 /* 9 */
! 176: #define XL_STAT_UP_COMPLETE 0x0400 /* 10 */
! 177: #define XL_STAT_DMABUSY 0x0800 /* 11 first generation */
! 178: #define XL_STAT_CMDBUSY 0x1000 /* 12 */
! 179:
! 180: /*
! 181: * Interrupts we normally want enabled.
! 182: */
! 183: #define XL_INTRS \
! 184: (XL_STAT_UP_COMPLETE|XL_STAT_STATSOFLOW|XL_STAT_ADFAIL| \
! 185: XL_STAT_DOWN_COMPLETE|XL_STAT_TX_COMPLETE|XL_STAT_INTLATCH)
! 186:
! 187: /*
! 188: * Window 0 registers
! 189: */
! 190: #define XL_W0_EE_DATA 0x0C
! 191: #define XL_W0_EE_CMD 0x0A
! 192: #define XL_W0_RSRC_CFG 0x08
! 193: #define XL_W0_ADDR_CFG 0x06
! 194: #define XL_W0_CFG_CTRL 0x04
! 195:
! 196: #define XL_W0_PROD_ID 0x02
! 197: #define XL_W0_MFG_ID 0x00
! 198:
! 199: /*
! 200: * Window 1
! 201: */
! 202:
! 203: #define XL_W1_TX_FIFO 0x10
! 204:
! 205: #define XL_W1_FREE_TX 0x0C
! 206: #define XL_W1_TX_STATUS 0x0B
! 207: #define XL_W1_TX_TIMER 0x0A
! 208: #define XL_W1_RX_STATUS 0x08
! 209: #define XL_W1_RX_FIFO 0x00
! 210:
! 211: /*
! 212: * RX status codes
! 213: */
! 214: #define XL_RXSTATUS_OVERRUN 0x01
! 215: #define XL_RXSTATUS_RUNT 0x02
! 216: #define XL_RXSTATUS_ALIGN 0x04
! 217: #define XL_RXSTATUS_CRC 0x08
! 218: #define XL_RXSTATUS_OVERSIZE 0x10
! 219: #define XL_RXSTATUS_DRIBBLE 0x20
! 220:
! 221: /*
! 222: * TX status codes
! 223: */
! 224: #define XL_TXSTATUS_RECLAIM 0x02 /* 3c905B only */
! 225: #define XL_TXSTATUS_OVERFLOW 0x04
! 226: #define XL_TXSTATUS_MAXCOLS 0x08
! 227: #define XL_TXSTATUS_UNDERRUN 0x10
! 228: #define XL_TXSTATUS_JABBER 0x20
! 229: #define XL_TXSTATUS_INTREQ 0x40
! 230: #define XL_TXSTATUS_COMPLETE 0x80
! 231:
! 232: /*
! 233: * Window 2
! 234: */
! 235: #define XL_W2_RESET_OPTIONS 0x0C /* 3c905B only */
! 236: #define XL_W2_STATION_MASK_HI 0x0A
! 237: #define XL_W2_STATION_MASK_MID 0x08
! 238: #define XL_W2_STATION_MASK_LO 0x06
! 239: #define XL_W2_STATION_ADDR_HI 0x04
! 240: #define XL_W2_STATION_ADDR_MID 0x02
! 241: #define XL_W2_STATION_ADDR_LO 0x00
! 242:
! 243: #define XL_RESETOPT_FEATUREMASK 0x0001|0x0002|0x004
! 244: #define XL_RESETOPT_D3RESETDIS 0x0008
! 245: #define XL_RESETOPT_DISADVFD 0x0010
! 246: #define XL_RESETOPT_DISADV100 0x0020
! 247: #define XL_RESETOPT_DISAUTONEG 0x0040
! 248: #define XL_RESETOPT_DEBUGMODE 0x0080
! 249: #define XL_RESETOPT_FASTAUTO 0x0100
! 250: #define XL_RESETOPT_FASTEE 0x0200
! 251: #define XL_RESETOPT_FORCEDCONF 0x0400
! 252: #define XL_RESETOPT_TESTPDTPDR 0x0800
! 253: #define XL_RESETOPT_TEST100TX 0x1000
! 254: #define XL_RESETOPT_TEST100RX 0x2000
! 255:
! 256: #define XL_RESETOPT_INVERT_LED 0x0010
! 257: #define XL_RESETOPT_INVERT_MII 0x4000
! 258:
! 259: /*
! 260: * Window 3 (fifo management)
! 261: */
! 262: #define XL_W3_INTERNAL_CFG 0x00
! 263: #define XL_W3_MAXPKTSIZE 0x04 /* 3C905B only */
! 264: #define XL_W3_RESET_OPT 0x08
! 265: #define XL_W3_FREE_TX 0x0C
! 266: #define XL_W3_FREE_RX 0x0A
! 267: #define XL_W3_MAC_CTRL 0x06
! 268:
! 269: #define XL_ICFG_CONNECTOR_MASK 0x00F00000
! 270: #define XL_ICFG_CONNECTOR_BITS 20
! 271:
! 272: #define XL_ICFG_RAMSIZE_MASK 0x00000007
! 273: #define XL_ICFG_RAMWIDTH 0x00000008
! 274: #define XL_ICFG_ROMSIZE_MASK (0x00000040|0x00000080)
! 275: #define XL_ICFG_DISABLE_BASSD 0x00000100
! 276: #define XL_ICFG_RAMLOC 0x00000200
! 277: #define XL_ICFG_RAMPART (0x00010000|0x00020000)
! 278: #define XL_ICFG_XCVRSEL (0x00100000|0x00200000|0x00400000)
! 279: #define XL_ICFG_AUTOSEL 0x01000000
! 280:
! 281: #define XL_XCVR_10BT 0x00
! 282: #define XL_XCVR_AUI 0x01
! 283: #define XL_XCVR_RSVD_0 0x02
! 284: #define XL_XCVR_COAX 0x03
! 285: #define XL_XCVR_100BTX 0x04
! 286: #define XL_XCVR_100BFX 0x05
! 287: #define XL_XCVR_MII 0x06
! 288: #define XL_XCVR_RSVD_1 0x07
! 289: #define XL_XCVR_AUTO 0x08 /* 3c905B only */
! 290: #define XL_XCVR_NWAY 0x09 /* 3CCFE575CT CardBus */
! 291:
! 292: #define XL_MACCTRL_DEFER_EXT_END 0x0001
! 293: #define XL_MACCTRL_DEFER_0 0x0002
! 294: #define XL_MACCTRL_DEFER_1 0x0004
! 295: #define XL_MACCTRL_DEFER_2 0x0008
! 296: #define XL_MACCTRL_DEFER_3 0x0010
! 297: #define XL_MACCTRL_DUPLEX 0x0020
! 298: #define XL_MACCTRL_ALLOW_LARGE_PACK 0x0040
! 299: #define XL_MACCTRL_EXTEND_AFTER_COL 0x0080 (3c905B only)
! 300: #define XL_MACCTRL_FLOW_CONTROL_ENB 0x0100 (3c905B only)
! 301: #define XL_MACCTRL_VLT_END 0x0200 (3c905B only)
! 302:
! 303: /*
! 304: * The 'reset options' register contains power-on reset values
! 305: * loaded from the EEPROM. This includes the supported media
! 306: * types on the card. It is also known as the media options register.
! 307: */
! 308: #define XL_W3_MEDIA_OPT 0x08
! 309:
! 310: #define XL_MEDIAOPT_BT4 0x0001 /* MII */
! 311: #define XL_MEDIAOPT_BTX 0x0002 /* on-chip */
! 312: #define XL_MEDIAOPT_BFX 0x0004 /* on-chip */
! 313: #define XL_MEDIAOPT_BT 0x0008 /* on-chip */
! 314: #define XL_MEDIAOPT_BNC 0x0010 /* on-chip */
! 315: #define XL_MEDIAOPT_AUI 0x0020 /* on-chip */
! 316: #define XL_MEDIAOPT_MII 0x0040 /* MII */
! 317: #define XL_MEDIAOPT_VCO 0x0100 /* 1st gen chip only */
! 318:
! 319: #define XL_MEDIAOPT_10FL 0x0100 /* 3x905B only, on-chip */
! 320: #define XL_MEDIAOPT_MASK 0x01FF
! 321:
! 322: /*
! 323: * Window 4 (diagnostics)
! 324: */
! 325: #define XL_W4_UPPERBYTESOK 0x0D
! 326: #define XL_W4_BADSSD 0x0C
! 327: #define XL_W4_MEDIA_STATUS 0x0A
! 328: #define XL_W4_PHY_MGMT 0x08
! 329: #define XL_W4_NET_DIAG 0x06
! 330: #define XL_W4_FIFO_DIAG 0x04
! 331: #define XL_W4_VCO_DIAG 0x02
! 332:
! 333: #define XL_W4_CTRLR_STAT 0x08
! 334: #define XL_W4_TX_DIAG 0x00
! 335:
! 336: #define XL_MII_CLK 0x01
! 337: #define XL_MII_DATA 0x02
! 338: #define XL_MII_DIR 0x04
! 339:
! 340: #define XL_MEDIA_SQE 0x0008
! 341: #define XL_MEDIA_10TP 0x00C0
! 342: #define XL_MEDIA_LNK 0x0080
! 343: #define XL_MEDIA_LNKBEAT 0x0800
! 344:
! 345: #define XL_MEDIASTAT_CRCSTRIP 0x0004
! 346: #define XL_MEDIASTAT_SQEENB 0x0008
! 347: #define XL_MEDIASTAT_COLDET 0x0010
! 348: #define XL_MEDIASTAT_CARRIER 0x0020
! 349: #define XL_MEDIASTAT_JABGUARD 0x0040
! 350: #define XL_MEDIASTAT_LINKBEAT 0x0080
! 351: #define XL_MEDIASTAT_JABDETECT 0x0200
! 352: #define XL_MEDIASTAT_POLREVERS 0x0400
! 353: #define XL_MEDIASTAT_LINKDETECT 0x0800
! 354: #define XL_MEDIASTAT_TXINPROG 0x1000
! 355: #define XL_MEDIASTAT_DCENB 0x4000
! 356: #define XL_MEDIASTAT_AUIDIS 0x8000
! 357:
! 358: #define XL_NETDIAG_TEST_LOWVOLT 0x0001
! 359: #define XL_NETDIAG_ASIC_REVMASK (0x0002|0x0004|0x0008|0x0010|0x0020)
! 360: #define XL_NETDIAG_UPPER_BYTES_ENABLE 0x0040
! 361: #define XL_NETDIAG_STATS_ENABLED 0x0080
! 362: #define XL_NETDIAG_TX_FATALERR 0x0100
! 363: #define XL_NETDIAG_TRANSMITTING 0x0200
! 364: #define XL_NETDIAG_RX_ENABLED 0x0400
! 365: #define XL_NETDIAG_TX_ENABLED 0x0800
! 366: #define XL_NETDIAG_FIFO_LOOPBACK 0x1000
! 367: #define XL_NETDIAG_MAC_LOOPBACK 0x2000
! 368: #define XL_NETDIAG_ENDEC_LOOPBACK 0x4000
! 369: #define XL_NETDIAG_EXTERNAL_LOOP 0x8000
! 370:
! 371: /*
! 372: * Window 5
! 373: */
! 374: #define XL_W5_STAT_ENB 0x0C
! 375: #define XL_W5_INTR_ENB 0x0A
! 376: #define XL_W5_RECLAIM_THRESH 0x09 /* 3c905B only */
! 377: #define XL_W5_RX_FILTER 0x08
! 378: #define XL_W5_RX_EARLYTHRESH 0x06
! 379: #define XL_W5_TX_AVAILTHRESH 0x02
! 380: #define XL_W5_TX_STARTTHRESH 0x00
! 381:
! 382: /*
! 383: * RX filter bits
! 384: */
! 385: #define XL_RXFILTER_INDIVIDUAL 0x01
! 386: #define XL_RXFILTER_ALLMULTI 0x02
! 387: #define XL_RXFILTER_BROADCAST 0x04
! 388: #define XL_RXFILTER_ALLFRAMES 0x08
! 389: #define XL_RXFILTER_MULTIHASH 0x10 /* 3c905B only */
! 390:
! 391: /*
! 392: * Window 6 (stats)
! 393: */
! 394: #define XL_W6_TX_BYTES_OK 0x0C
! 395: #define XL_W6_RX_BYTES_OK 0x0A
! 396: #define XL_W6_UPPER_FRAMES_OK 0x09
! 397: #define XL_W6_DEFERRED 0x08
! 398: #define XL_W6_RX_OK 0x07
! 399: #define XL_W6_TX_OK 0x06
! 400: #define XL_W6_RX_OVERRUN 0x05
! 401: #define XL_W6_COL_LATE 0x04
! 402: #define XL_W6_COL_SINGLE 0x03
! 403: #define XL_W6_COL_MULTIPLE 0x02
! 404: #define XL_W6_SQE_ERRORS 0x01
! 405: #define XL_W6_CARRIER_LOST 0x00
! 406:
! 407: /*
! 408: * Window 7 (bus master control)
! 409: */
! 410: #define XL_W7_BM_ADDR 0x00
! 411: #define XL_W7_BM_LEN 0x06
! 412: #define XL_W7_BM_STATUS 0x0B
! 413: #define XL_W7_BM_TIMEr 0x0A
! 414:
! 415: /*
! 416: * bus master control registers
! 417: */
! 418: #define XL_BM_PKTSTAT 0x20
! 419: #define XL_BM_DOWNLISTPTR 0x24
! 420: #define XL_BM_FRAGADDR 0x28
! 421: #define XL_BM_FRAGLEN 0x2C
! 422: #define XL_BM_TXFREETHRESH 0x2F
! 423: #define XL_BM_UPPKTSTAT 0x30
! 424: #define XL_BM_UPLISTPTR 0x38
! 425:
! 426: #define XL_LAST_FRAG 0x80000000
! 427:
! 428: /*
! 429: * Boomerang/Cyclone TX/RX list structure.
! 430: * For the TX lists, bits 0 to 12 of the status word indicate
! 431: * length.
! 432: * This looks suspiciously like the ThunderLAN, doesn't it.
! 433: */
! 434: struct xl_frag {
! 435: u_int32_t xl_addr; /* 63 addr/len pairs */
! 436: u_int32_t xl_len;
! 437: };
! 438:
! 439: struct xl_list {
! 440: u_int32_t xl_next; /* final entry has 0 nextptr */
! 441: u_int32_t xl_status;
! 442: struct xl_frag xl_frag[63];
! 443: };
! 444:
! 445: struct xl_list_onefrag {
! 446: u_int32_t xl_next; /* final entry has 0 nextptr */
! 447: u_int32_t xl_status;
! 448: struct xl_frag xl_frag;
! 449: };
! 450:
! 451: #define XL_MAXFRAGS 63
! 452: #define XL_RX_LIST_CNT 32
! 453: #define XL_TX_LIST_CNT 32
! 454: #define XL_MIN_FRAMELEN 60
! 455: #define XL_INC(x, y) (x) = (x + 1) % (y)
! 456:
! 457: struct xl_list_data {
! 458: struct xl_list_onefrag xl_rx_list[XL_RX_LIST_CNT];
! 459: struct xl_list xl_tx_list[XL_TX_LIST_CNT];
! 460: unsigned char xl_pad[XL_MIN_FRAMELEN];
! 461: };
! 462:
! 463: struct xl_chain {
! 464: struct xl_list *xl_ptr;
! 465: struct mbuf *xl_mbuf;
! 466: struct xl_chain *xl_next;
! 467: struct xl_chain *xl_prev;
! 468: u_int32_t xl_phys;
! 469: bus_dmamap_t map;
! 470: };
! 471:
! 472: struct xl_chain_onefrag {
! 473: struct xl_list_onefrag *xl_ptr;
! 474: struct mbuf *xl_mbuf;
! 475: struct xl_chain_onefrag *xl_next;
! 476: bus_dmamap_t map;
! 477: };
! 478:
! 479: struct xl_chain_data {
! 480: struct xl_chain_onefrag xl_rx_chain[XL_RX_LIST_CNT];
! 481: struct xl_chain xl_tx_chain[XL_TX_LIST_CNT];
! 482:
! 483: struct xl_chain_onefrag *xl_rx_head;
! 484:
! 485: /* 3c90x "boomerang" queuing stuff */
! 486: struct xl_chain *xl_tx_head;
! 487: struct xl_chain *xl_tx_tail;
! 488: struct xl_chain *xl_tx_free;
! 489:
! 490: /* 3c90xB "cyclone/hurricane/tornado" stuff */
! 491: int xl_tx_prod;
! 492: int xl_tx_cons;
! 493: int xl_tx_cnt;
! 494: };
! 495:
! 496: #define XL_RXSTAT_LENMASK 0x00001FFF
! 497: #define XL_RXSTAT_UP_ERROR 0x00004000
! 498: #define XL_RXSTAT_UP_CMPLT 0x00008000
! 499: #define XL_RXSTAT_UP_OVERRUN 0x00010000
! 500: #define XL_RXSTAT_RUNT 0x00020000
! 501: #define XL_RXSTAT_ALIGN 0x00040000
! 502: #define XL_RXSTAT_CRC 0x00080000
! 503: #define XL_RXSTAT_OVERSIZE 0x00100000
! 504: #define XL_RXSTAT_DRIBBLE 0x00800000
! 505: #define XL_RXSTAT_UP_OFLOW 0x01000000
! 506: #define XL_RXSTAT_IPCKERR 0x02000000 /* 3c905B only */
! 507: #define XL_RXSTAT_TCPCKERR 0x04000000 /* 3c905B only */
! 508: #define XL_RXSTAT_UDPCKERR 0x08000000 /* 3c905B only */
! 509: #define XL_RXSTAT_BUFEN 0x10000000 /* 3c905B only */
! 510: #define XL_RXSTAT_IPCKOK 0x20000000 /* 3c905B only */
! 511: #define XL_RXSTAT_TCPCKOK 0x40000000 /* 3c905B only */
! 512: #define XL_RXSTAT_UDPCKOK 0x80000000 /* 3c905B only */
! 513:
! 514: #define XL_TXSTAT_LENMASK 0x00001FFF
! 515: #define XL_TXSTAT_CRCDIS 0x00002000
! 516: #define XL_TXSTAT_TX_INTR 0x00008000
! 517: #define XL_TXSTAT_DL_COMPLETE 0x00010000
! 518: #define XL_TXSTAT_IPCKSUM 0x02000000 /* 3c905B only */
! 519: #define XL_TXSTAT_TCPCKSUM 0x04000000 /* 3c905B only */
! 520: #define XL_TXSTAT_UDPCKSUM 0x08000000 /* 3c905B only */
! 521: #define XL_TXSTAT_RND_DEFEAT 0x10000000 /* 3c905B only */
! 522: #define XL_TXSTAT_EMPTY 0x20000000 /* 3c905B only */
! 523: #define XL_TXSTAT_DL_INTR 0x80000000
! 524:
! 525: #define XL_CAPABILITY_BM 0x20
! 526:
! 527: struct xl_type {
! 528: u_int16_t xl_vid;
! 529: u_int16_t xl_did;
! 530: char *xl_name;
! 531: };
! 532:
! 533: struct xl_mii_frame {
! 534: u_int8_t mii_stdelim;
! 535: u_int8_t mii_opcode;
! 536: u_int8_t mii_phyaddr;
! 537: u_int8_t mii_regaddr;
! 538: u_int8_t mii_turnaround;
! 539: u_int16_t mii_data;
! 540: };
! 541:
! 542: /*
! 543: * MII constants
! 544: */
! 545: #define XL_MII_STARTDELIM 0x01
! 546: #define XL_MII_READOP 0x02
! 547: #define XL_MII_WRITEOP 0x01
! 548: #define XL_MII_TURNAROUND 0x02
! 549:
! 550: /*
! 551: * The 3C905B adapters implement a few features that we want to
! 552: * take advantage of, namely the multicast hash filter. With older
! 553: * chips, you only have the option of turning on reception of all
! 554: * multicast frames, which is kind of lame.
! 555: *
! 556: * We also use this to decide on a transmit strategy. For the 3c90xB
! 557: * cards, we can use polled descriptor mode, which reduces CPU overhead.
! 558: */
! 559: #define XL_TYPE_905B 1
! 560: #define XL_TYPE_90X 2
! 561:
! 562: #define XL_FLAG_FUNCREG 0x0001
! 563: #define XL_FLAG_PHYOK 0x0002
! 564: #define XL_FLAG_EEPROM_OFFSET_30 0x0004
! 565: #define XL_FLAG_WEIRDRESET 0x0008
! 566: #define XL_FLAG_8BITROM 0x0010
! 567: #define XL_FLAG_INVERT_LED_PWR 0x0020
! 568: #define XL_FLAG_INVERT_MII_PWR 0x0040
! 569: #define XL_FLAG_NO_XCVR_PWR 0x0080
! 570: #define XL_FLAG_USE_MMIO 0x0100
! 571: #define XL_FLAG_NO_MMIO 0x0200
! 572:
! 573: #define XL_NO_XCVR_PWR_MAGICBITS 0x0900
! 574:
! 575: struct xl_softc {
! 576: struct device sc_dev; /* generic device structure */
! 577: void * xl_intrhand; /* interrupt handler cookie */
! 578: struct timeout xl_stsup_tmo; /* stats update timeout */
! 579: struct arpcom sc_arpcom; /* interface info */
! 580: struct ifmedia ifmedia; /* media info */
! 581: mii_data_t sc_mii; /* mii bus */
! 582: bus_space_handle_t xl_bhandle;
! 583: bus_space_tag_t xl_btag;
! 584: bus_space_handle_t xl_funch;
! 585: bus_space_tag_t xl_funct;
! 586: struct xl_type *xl_info; /* 3Com adapter info */
! 587: u_int8_t xl_hasmii; /* whether we have mii or not */
! 588: u_int8_t xl_type;
! 589: u_int32_t xl_xcvr;
! 590: u_int16_t xl_media;
! 591: u_int16_t xl_caps;
! 592: u_int8_t xl_stats_no_timeout;
! 593: u_int16_t xl_tx_thresh;
! 594: int xl_if_flags;
! 595: struct xl_list_data *xl_ldata;
! 596: struct xl_chain_data xl_cdata;
! 597: int xl_flags;
! 598: void (*intr_ack)(struct xl_softc *);
! 599: void * sc_sdhook, *sc_pwrhook;
! 600: bus_dma_tag_t sc_dmat;
! 601: bus_dmamap_t sc_listmap;
! 602: bus_dma_segment_t sc_listseg[1];
! 603: int sc_listnseg;
! 604: caddr_t sc_listkva;
! 605: bus_dmamap_t sc_rx_sparemap;
! 606: bus_dmamap_t sc_tx_sparemap;
! 607: };
! 608:
! 609: #define xl_rx_goodframes(x) \
! 610: ((x.xl_upper_frames_ok & 0x03) << 8) | x.xl_rx_frames_ok
! 611:
! 612: #define xl_tx_goodframes(x) \
! 613: ((x.xl_upper_frames_ok & 0x30) << 4) | x.xl_tx_frames_ok
! 614:
! 615: struct xl_stats {
! 616: u_int8_t xl_carrier_lost;
! 617: u_int8_t xl_sqe_errs;
! 618: u_int8_t xl_tx_multi_collision;
! 619: u_int8_t xl_tx_single_collision;
! 620: u_int8_t xl_tx_late_collision;
! 621: u_int8_t xl_rx_overrun;
! 622: u_int8_t xl_tx_frames_ok;
! 623: u_int8_t xl_rx_frames_ok;
! 624: u_int8_t xl_tx_deferred;
! 625: u_int8_t xl_upper_frames_ok;
! 626: u_int16_t xl_rx_bytes_ok;
! 627: u_int16_t xl_tx_bytes_ok;
! 628: u_int16_t status;
! 629: };
! 630:
! 631: /*
! 632: * register space access macros
! 633: */
! 634: #define CSR_WRITE_4(sc, reg, val) \
! 635: bus_space_write_4(sc->xl_btag, sc->xl_bhandle, reg, val)
! 636: #define CSR_WRITE_2(sc, reg, val) \
! 637: bus_space_write_2(sc->xl_btag, sc->xl_bhandle, reg, val)
! 638: #define CSR_WRITE_1(sc, reg, val) \
! 639: bus_space_write_1(sc->xl_btag, sc->xl_bhandle, reg, val)
! 640:
! 641: #define CSR_READ_4(sc, reg) \
! 642: bus_space_read_4(sc->xl_btag, sc->xl_bhandle, reg)
! 643: #define CSR_READ_2(sc, reg) \
! 644: bus_space_read_2(sc->xl_btag, sc->xl_bhandle, reg)
! 645: #define CSR_READ_1(sc, reg) \
! 646: bus_space_read_1(sc->xl_btag, sc->xl_bhandle, reg)
! 647:
! 648: #define XL_SEL_WIN(x) \
! 649: CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_WINSEL | x)
! 650: #define XL_TIMEOUT 2000
! 651:
! 652: /*
! 653: * General constants that are fun to know.
! 654: *
! 655: * 3Com PCI vendor ID
! 656: */
! 657: #define TC_VENDORID 0x10B7
! 658:
! 659: /*
! 660: * 3Com PCI chip device IDs.
! 661: */
! 662: #define TC_DEVICEID_TORNADO_HOMECONNECT 0x4500
! 663: #define TC_DEVICEID_HURRICANE_555 0x5055
! 664: #define TC_DEVICEID_HURRICANE_575A 0x5057
! 665: #define TC_DEVICEID_HURRICANE_575B 0x5157
! 666: #define TC_DEVICEID_HURRICANE_575C 0x5257
! 667: #define TC_DEVICEID_HURRICANE_656 0x6560
! 668: #define TC_DEVICEID_HURRICANE_656B 0x6562
! 669: #define TC_DEVICEID_TORNADO_656C 0x6564
! 670: #define TC_DEVICEID_HURRICANE_556 0x6055
! 671: #define TC_DEVICEID_HURRICANE_556B 0x6056
! 672: #define TC_DEVICEID_HURRICANE_SOHO100TX 0x7646
! 673: #define TC_DEVICEID_BOOMERANG_10BT 0x9000
! 674: #define TC_DEVICEID_BOOMERANG_10BT_COMBO 0x9001
! 675: #define TC_DEVICEID_BOOMERANG_10_100BT 0x9050
! 676: #define TC_DEVICEID_BOOMERANG_100BT4 0x9051
! 677: #define TC_DEVICEID_KRAKATOA_10BT 0x9004
! 678: #define TC_DEVICEID_KRAKATOA_10BT_COMBO 0x9005
! 679: #define TC_DEVICEID_KRAKATOA_10BT_TPC 0x9006
! 680: #define TC_DEVICEID_CYCLONE_10FL 0x900A
! 681: #define TC_DEVICEID_HURRICANE_10_100BT 0x9055
! 682: #define TC_DEVICEID_CYCLONE_10_100BT4 0x9056
! 683: #define TC_DEVICEID_CYCLONE_10_100_COMBO 0x9058
! 684: #define TC_DEVICEID_CYCLONE_10_100FX 0x905A
! 685: #define TC_DEVICEID_TORNADO_10_100BT 0x9200
! 686: #define TC_DEVICEID_TORNADO_10_100BT_920B 0x9201
! 687: #define TC_DEVICEID_HURRICANE_10_100BT_SERV 0x9800
! 688: #define TC_DEVICEID_TORNADO_10_100BT_SERV 0x9805
! 689:
! 690: /*
! 691: * 3Com CardBus chip device IDs.
! 692: *
! 693: * The third character of the model number indicates either a dongle ('C')
! 694: * or X-Jack ('X') connector. Presumably, "FE" means "Fast Ethernet", and
! 695: * the 'M' indicates a NIC/modem combo card.
! 696: */
! 697: #define TC_DEVICEID_3C575_CARDBUS 0x5057
! 698: #define TC_DEVICEID_3CCFE575BT_CARDBUS 0x5157 /* also 3CXFE575BT */
! 699: #define TC_DEVICEID_3CCFE575CT_CARDBUS 0x5257 /* also 3CXFE575CT */
! 700: #define TC_DEVICEID_3CCFEM656_CARDBUS 0x6560 /* also 3CXFEM656 */
! 701: #define TC_DEVICEID_3CCFEM656B_CARDBUS 0x6562
! 702: #define TC_DEVICEID_3CCFEM656C_CARDBUS 0x6564 /* also 3CXFEM656C */
! 703:
! 704: #define XL_CARDBUS_INTR 0x0004
! 705: #define XL_CARDBUS_INTR_ACK 0x8000
! 706:
! 707: /*
! 708: * PCI low memory base and low I/O base register, and
! 709: * other PCI registers. Note: some are only available on
! 710: * the 3c905B, in particular those that related to power management.
! 711: */
! 712:
! 713: #define XL_PCI_VENDOR_ID 0x00
! 714: #define XL_PCI_DEVICE_ID 0x02
! 715: #define XL_PCI_COMMAND 0x04
! 716: #define XL_PCI_STATUS 0x06
! 717: #define XL_PCI_CLASSCODE 0x09
! 718: #define XL_PCI_LATENCY_TIMER 0x0D
! 719: #define XL_PCI_HEADER_TYPE 0x0E
! 720: #define XL_PCI_LOIO 0x10
! 721: #define XL_PCI_LOMEM 0x14
! 722: #define XL_PCI_BIOSROM 0x30
! 723: #define XL_PCI_INTLINE 0x3C
! 724: #define XL_PCI_INTPIN 0x3D
! 725: #define XL_PCI_MINGNT 0x3E
! 726: #define XL_PCI_MINLAT 0x0F
! 727: #define XL_PCI_RESETOPT 0x48
! 728: #define XL_PCI_EEPROM_DATA 0x4C
! 729:
! 730: /* 3c905B-only registers */
! 731: #define XL_PCI_CAPID 0xDC /* 8 bits */
! 732: #define XL_PCI_NEXTPTR 0xDD /* 8 bits */
! 733: #define XL_PCI_PWRMGMTCAP 0xDE /* 16 bits */
! 734: #define XL_PCI_PWRMGMTCTRL 0xE0 /* 16 bits */
! 735:
! 736: #define XL_PSTATE_MASK 0x0003
! 737: #define XL_PSTATE_D0 0x0000
! 738: #define XL_PSTATE_D1 0x0002
! 739: #define XL_PSTATE_D2 0x0002
! 740: #define XL_PSTATE_D3 0x0003
! 741: #define XL_PME_EN 0x0010
! 742: #define XL_PME_STATUS 0x8000
! 743:
! 744: extern int xl_intr(void *);
! 745: extern void xl_attach(struct xl_softc *);
! 746: extern int xl_detach(struct xl_softc *);
CVSweb