Annotation of sys/dev/ic/opl3sa3reg.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: opl3sa3reg.h,v 1.1 1999/10/06 12:48:32 fgsch Exp $ */
2: /* $NetBSD: opl3sa3reg.h,v 1.1 1999/10/05 03:38:17 itohy Exp $ */
3:
4: /*-
5: * Copyright (c) 1999 The NetBSD Foundation, Inc.
6: * All rights reserved.
7: *
8: * This code is derived from software contributed to The NetBSD Foundation
9: * by ITOH Yasufumi.
10: *
11: * Redistribution and use in source and binary forms, with or without
12: * modification, are permitted provided that the following conditions
13: * are met:
14: * 1. Redistributions of source code must retain the above copyright
15: * notice, this list of conditions and the following disclaimer.
16: * 2. Redistributions in binary form must reproduce the above copyright
17: * notice, this list of conditions and the following disclaimer in the
18: * documentation and/or other materials provided with the distribution.
19: * 3. All advertising materials mentioning features or use of this software
20: * must display the following acknowledgement:
21: * This product includes software developed by the NetBSD
22: * Foundation, Inc. and its contributors.
23: * 4. Neither the name of The NetBSD Foundation nor the names of its
24: * contributors may be used to endorse or promote products derived
25: * from this software without specific prior written permission.
26: *
27: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
28: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
29: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
31: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37: * POSSIBILITY OF SUCH DAMAGE.
38: */
39:
40: /*
41: * YAMAHA YMF715x (OPL3 Single-chip Audio System 3; OPL3-SA3)
42: * control register description
43: *
44: * Other ports (SBpro, WSS CODEC, MPU401, OPL3, etc.) are NOT listed here.
45: */
46:
47: /*
48: * direct registers
49: */
50:
51: /* offset from the base address */
52: #define SA3_CTL_INDEX 0 /* Index port (R/W) */
53: #define SA3_CTL_DATA 1 /* Data register port (R/W) */
54:
55: #define SA3_CTL_NPORT 2 /* number of ports */
56:
57: /*
58: * indirect registers
59: */
60:
61: #define SA3_PWR_MNG 0x01 /* Power management (R/W) */
62: #define SA3_PWR_MNG_ADOWN 0x20 /* Analog Down */
63: #define SA3_PWR_MNG_PSV 0x04 /* Power save */
64: #define SA3_PWR_MNG_PDN 0x02 /* Power down */
65: #define SA3_PWR_MNG_PDX 0x01 /* Oscillation stop */
66: #define SA3_PWR_MNG_DEFAULT 0x00 /* default value */
67:
68: #define SA3_SYS_CTL 0x02 /* System control (R/W) */
69: #define SA3_SYS_CTL_SBHE 0x80 /* 0: AT-bus, 1: XT-bus */
70: #define SA3_SYS_CTL_YMODE 0x30 /* 3D Enhancement mode */
71: #define SA3_SYS_CTL_YMODE0 0x00 /* Desktop mode (speaker 5-12cm) */
72: #define SA3_SYS_CTL_YMODE1 0x10 /* Notebook PC mode (1) (3cm) */
73: #define SA3_SYS_CTL_YMODE2 0x20 /* Notebook PC mode (2) (1.5cm) */
74: #define SA3_SYS_CTL_YMODE3 0x30 /* Hi-Fi mode (16-38cm) */
75: #define SA3_SYS_CTL_IDSEL 0x06 /* Specify DSP version of SBPro */
76: #define SA3_SYS_CTL_IDSEL0 0x00 /* major 0x03, minor 0x01 */
77: #define SA3_SYS_CTL_IDSEL1 0x02 /* major 0x02, minor 0x01 */
78: #define SA3_SYS_CTL_IDSEL2 0x04 /* major 0x01, minor 0x05 */
79: #define SA3_SYS_CTL_IDSEL3 0x06 /* major 0x00, minor 0x00 */
80: #define SA3_SYS_CTL_VZE 0x01 /* ZV */
81: #define SA3_SYS_CTL_DEFAULT 0x00 /* default value */
82:
83: #define SA3_IRQ_CONF 0x03 /* Interrupt Channel config (R/W) */
84: #define SA3_IRQ_CONF_OPL3_B 0x80 /* OPL3 uses IRQ-B */
85: #define SA3_IRQ_CONF_MPU_B 0x40 /* MPU401 uses IRQ-B */
86: #define SA3_IRQ_CONF_SB_B 0x20 /* Sound Blaster uses IRQ-B */
87: #define SA3_IRQ_CONF_WSS_B 0x10 /* WSS CODEC uses IRQ-B */
88: #define SA3_IRQ_CONF_OPL3_A 0x08 /* OPL3 uses IRQ-A */
89: #define SA3_IRQ_CONF_MPU_A 0x04 /* MPU401 uses IRQ-A */
90: #define SA3_IRQ_CONF_SB_A 0x02 /* Sound Blaster uses IRQ-A */
91: #define SA3_IRQ_CONF_WSS_A 0x01 /* WSS CODEC uses IRQ-A */
92: #define SA3_IRQ_CONF_DEFAULT (SA3_IRQ_CONF_MPU_B | SA3_IRQ_CONF_SB_B | \
93: SA3_IRQ_CONF_OPL3_A | SA3_IRQ_CONF_WSS_A)
94:
95: #define SA3_IRQA_STAT 0x04 /* Interrupt (IRQ-A) STATUS (RO) */
96: #define SA3_IRQB_STAT 0x05 /* Interrupt (IRQ-B) STATUS (RO) */
97: #define SA3_IRQ_STAT_MV 0x40 /* Hardware Volume Interrupt */
98: #define SA3_IRQ_STAT_OPL3 0x20 /* Internal FM-synthesizer timer */
99: #define SA3_IRQ_STAT_MPU 0x10 /* MPU401 Interrupt */
100: #define SA3_IRQ_STAT_SB 0x08 /* Sound Blaster Playback Interrupt */
101: #define SA3_IRQ_STAT_TI 0x04 /* Timer Flag of CODEC */
102: #define SA3_IRQ_STAT_CI 0x02 /* Recording Flag of CODEC */
103: #define SA3_IRQ_STAT_PI 0x01 /* Playback Flag of CODEC */
104:
105: #define SA3_DMA_CONF 0x06 /* DMA configuration (R/W) */
106: #define SA3_DMA_CONF_SB_B 0x40 /* Sound Blaster playback uses DMA-B */
107: #define SA3_DMA_CONF_WSS_R_B 0x20 /* WSS CODEC recording uses DMA-B */
108: #define SA3_DMA_CONF_WSS_P_B 0x10 /* WSS CODEC playback uses DMA-B */
109: #define SA3_DMA_CONF_SB_A 0x04 /* Sound Blaster playback uses DMA-A */
110: #define SA3_DMA_CONF_WSS_R_A 0x02 /* WSS CODEC recording uses DMA-A */
111: #define SA3_DMA_CONF_WSS_P_A 0x01 /* WSS CODEC playback uses DMA-A */
112: #define SA3_DMA_CONF_DEFAULT (SA3_DMA_CONF_SB_B | SA3_DMA_CONF_WSS_R_B | \
113: SA3_DMA_CONF_WSS_P_A)
114:
115: #define SA3_VOL_L 0x07 /* Master Volume Lch (R/W) */
116: #define SA3_VOL_R 0x08 /* Master Volume Rch (R/W) */
117: #define SA3_VOL_MUTE 0x80 /* Mute the channel */
118: #define SA3_VOL_MV 0x0f /* Master Volume bits */
119: #define SA3_VOL_MV_0 0x00 /* 0dB (maximum volume) */
120: #define SA3_VOL_MV_2 0x01 /* -2dB */
121: #define SA3_VOL_MV_4 0x02 /* -4dB */
122: #define SA3_VOL_MV_6 0x03 /* -6dB */
123: #define SA3_VOL_MV_8 0x04 /* -8dB */
124: #define SA3_VOL_MV_10 0x05 /* -10dB */
125: #define SA3_VOL_MV_12 0x06 /* -12dB */
126: #define SA3_VOL_MV_14 0x07 /* -14dB (default) */
127: #define SA3_VOL_MV_16 0x08 /* -16dB */
128: #define SA3_VOL_MV_18 0x09 /* -18dB */
129: #define SA3_VOL_MV_20 0x0a /* -20dB */
130: #define SA3_VOL_MV_22 0x0b /* -22dB */
131: #define SA3_VOL_MV_24 0x0c /* -24dB */
132: #define SA3_VOL_MV_26 0x0d /* -26dB */
133: #define SA3_VOL_MV_28 0x0e /* -28dB */
134: #define SA3_VOL_MV_30 0x0f /* -30dB (minimum volume) */
135: #define SA3_VOL_DEFAULT SA3_VOL_MV_14
136:
137: #define SA3_MIC_VOL 0x09 /* MIC Volume (R/W) */
138: #define SA3_MIC_MUTE 0x80 /* Mute Mic Volume */
139: #define SA3_MIC_MCV 0x1f /* Mic volume bits */
140: #define SA3_MIC_MCV12 0x00 /* +12.0dB (maximum volume) */
141: #define SA3_MIC_MCV10_5 0x01 /* +10.5dB */
142: #define SA3_MIC_MCV9 0x02 /* +9.0dB */
143: #define SA3_MIC_MCV7_5 0x03 /* +7.5dB */
144: #define SA3_MIC_MCV6 0x04 /* +6.0dB */
145: #define SA3_MIC_MCV4_5 0x05 /* +4.5dB */
146: #define SA3_MIC_MCV3 0x06 /* +3.0dB */
147: #define SA3_MIC_MCV1_5 0x07 /* +1.5dB */
148: #define SA3_MIC_MCV_0 0x08 /* 0.0dB (default) */
149: #define SA3_MIC_MCV_1_5 0x09 /* -1.5dB */
150: #define SA3_MIC_MCV_3_0 0x0a /* -3.0dB */
151: #define SA3_MIC_MCV_4_5 0x0b /* -4.5dB */
152: #define SA3_MIC_MCV_6 0x0c /* -6.0dB */
153: #define SA3_MIC_MCV_7_5 0x0d /* -7.5dB */
154: #define SA3_MIC_MCV_9 0x0e /* -9.0dB */
155: #define SA3_MIC_MCV_10_5 0x0f /* -10.5dB */
156: #define SA3_MIC_MCV_12 0x10 /* -12.0dB */
157: #define SA3_MIC_MCV_13_5 0x11 /* -13.5dB */
158: #define SA3_MIC_MCV_15 0x12 /* -15.0dB */
159: #define SA3_MIC_MCV_16_5 0x13 /* -16.5dB */
160: #define SA3_MIC_MCV_18 0x14 /* -18.0dB */
161: #define SA3_MIC_MCV_19_5 0x15 /* -19.5dB */
162: #define SA3_MIC_MCV_21 0x16 /* -21.0dB */
163: #define SA3_MIC_MCV_22_5 0x17 /* -22.5dB */
164: #define SA3_MIC_MCV_24 0x18 /* -24.0dB */
165: #define SA3_MIC_MCV_25_5 0x19 /* -25.5dB */
166: #define SA3_MIC_MCV_27 0x1a /* -27.0dB */
167: #define SA3_MIC_MCV_28_5 0x1b /* -28.5dB */
168: #define SA3_MIC_MCV_30 0x1c /* -30.0dB */
169: #define SA3_MIC_MCV_31_5 0x1d /* -31.5dB */
170: #define SA3_MIC_MCV_33 0x1e /* -33.0dB */
171: #define SA3_MIC_MCV_34_5 0x1f /* -34.5dB (minimum volume) */
172: #define SA3_MIC_VOL_DEFAULT (SA3_MIC_MUTE | SA3_MIC_MCV_0)
173:
174: #define SA3_MISC 0x0a /* Miscellaneous */
175: #define SA3_MISC_VEN 0x80 /* Enable hardware volume control */
176: #define SA3_MISC_MCSW 0x10 /* A/D is connected to 0: Rch of Mic,
177: 1: loopback of monaural output */
178: #define SA3_MISC_MODE 0x08 /* 0: SB mode, 1: WSS mode (RO) */
179: #define SA3_MISC_VER 0x07 /* Version of OPL3-SA3 (RO) */
180: /* (4 or 5?) */
181: /*#define SA3_MISC_DEFAULT (SA3_MISC_VEN | (4 or 5?)) */
182:
183: /* WSS DMA Base counters (R/W) used for suspend/resume */
184: #define SA3_DMA_CNT_PLAY_LOW 0x0b /* Playback Base Counter (Low) */
185: #define SA3_DMA_CNT_PLAY_HIGH 0x0c /* Playback Base Counter (High) */
186: #define SA3_DMA_CNT_REC_LOW 0x0d /* Recording Base Counter (Low) */
187: #define SA3_DMA_CNT_REC_HIGH 0x0e /* Recording Base Counter (High) */
188:
189: #define SA3_WSS_INT_SCAN 0x0f /* WSS Interrupt Scan out/in (R/W) */
190: #define SA3_WSS_INT_SCAN_STI 0x04 /* 1: TI = "1" and IRQ active */
191: #define SA3_WSS_INT_SCAN_SCI 0x02 /* 1: CI = "1" and IRQ active */
192: #define SA3_WSS_INT_SCAN_SPI 0x01 /* 1: PI = "1" and IRQ active */
193: #define SA3_WSS_INT_DEFAULT 0x00 /* default value */
194:
195: #define SA3_SB_SCAN 0x10 /* SB Internal State Scan out/in (R/W)*/
196: #define SA3_SB_SCAN_SBPDA 0x80 /* Sound Blaster Power Down ack */
197: #define SA3_SB_SCAN_SS 0x08 /* Scan Select */
198: #define SA3_SB_SCAN_SM 0x04 /* Scan Mode 1: read out, 0: write in */
199: #define SA3_SB_SCAN_SE 0x02 /* Scan Enable */
200: #define SA3_SB_SCAN_SBPDR 0x01 /* Sound Blaster Power Down Request */
201: #define SA3_SB_SCAN_DEFAULT 0x00 /* default value */
202:
203: #define SA3_SB_SCAN_DATA 0x11 /* SB Internal State Scan Data (R/W)*/
204:
205: #define SA3_DPWRDWN 0x12 /* Digital Partial Power Down (R/W) */
206: #define SA3_DPWRDWN_JOY 0x80 /* Joystick power down */
207: #define SA3_DPWRDWN_MPU 0x40 /* MPU401 power down */
208: #define SA3_DPWRDWN_MCLKO 0x20 /* Master Clock disable */
209: #define SA3_DPWRDWN_FM 0x10 /* FM (OPL3) power down */
210: #define SA3_DPWRDWN_WSS_R 0x08 /* WSS recording power down */
211: #define SA3_DPWRDWN_WSS_P 0x04 /* WSS playback power down */
212: #define SA3_DPWRDWN_SB 0x02 /* Sound Blaster power down */
213: #define SA3_DPWRDWN_PNP 0x01 /* PnP power down */
214: #define SA3_DPWRDWN_DEFAULT 0x00 /* default value */
215:
216: #define SA3_APWRDWN 0x13 /* Analog Partial Power Down (R/W) */
217: #define SA3_APWRDWN_FMDAC 0x10 /* FMDAC for OPL3 power down */
218: #define SA3_APWRDWN_AD 0x08 /* A/D for WSS recording power down */
219: #define SA3_APWRDWN_DA 0x04 /* D/A for WSS playback power down */
220: #define SA3_APWRDWN_SBDAC 0x02 /* D/A for SB power down */
221: #define SA3_APWRDWN_WIDE 0x01 /* Wide Stereo power down */
222: #define SA3_APWRDWN_DEFAULT 0x00 /* default value */
223:
224: #define SA3_3D_WIDE 0x14 /* 3D Enhanced control (WIDE) (R/W) */
225: #define SA3_3D_WIDE_WIDER 0x70 /* Rch of wide 3D enhanced control */
226: #define SA3_3D_WIDE_WIDEL 0x07 /* Lch of wide 3D enhanced control */
227: #define SA3_3D_WIDE_DEFAULT 0x00 /* default value */
228:
229: #define SA3_3D_BASS 0x15 /* 3D Enhanced control (BASS) (R/W) */
230: #define SA3_3D_BASS_BASSR 0x70 /* Rch of bass 3D enhanced control */
231: #define SA3_3D_BASS_BASSL 0x07 /* Lch of bass 3D enhanced control */
232: #define SA3_3D_BASS_DEFAULT 0x00 /* default value */
233:
234: #define SA3_3D_TREBLE 0x16 /* 3D Enhanced control (TREBLE) (R/W) */
235: #define SA3_3D_TREBLE_TRER 0x70 /* Rch of treble 3D enhanced control */
236: #define SA3_3D_TREBLE_TREL 0x07 /* Lch of treble 3D enhanced control */
237: #define SA3_3D_TREBLE_DEFAULT 0x00 /* default value */
238:
239: /* common to the 3D enhance registers */
240: #define SA3_3D_BITS 0x07
241: #define SA3_3D_LSHIFT 0
242: #define SA3_3D_RSHIFT 4
243:
244: #define SA3_HVOL_INTR_CNF 0x17 /* Hardware Volume Intr Channel (R/W) */
245: #define SA3_HVOL_INTR_CNF_B 0x20 /* Hardware Volume uses IRQ-B */
246: #define SA3_HVOL_INTR_CNF_A 0x10 /* Hardware Volume uses IRQ-A */
247: #define SA3_HVOL_INTR_CNF_DEFAULT 0x00
248:
249: #define SA3_MULTI_STAT 0x18 /* Multi-purpose Select Pin Stat (RO) */
250: #define SA3_MULTI_STAT_SEL 0x70 /* State of SEL2-0 pins */
CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to opl3sa3reg.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / dev / ic