[BACK]Return to i82586reg.h CVS log [TXT][DIR] Up to [local] / sys / dev / ic

Annotation of sys/dev/ic/i82586reg.h, Revision 1.1.1.1

1.1       nbrk        1: /*     $OpenBSD: i82586reg.h,v 1.3 2003/10/21 18:58:49 jmc Exp $       */
                      2: /*     $NetBSD: i82586reg.h,v 1.5 1995/04/04 01:59:34 mycroft Exp $    */
                      3:
                      4: /*-
                      5:  * Copyright (c) 1992, University of Vermont and State Agricultural College.
                      6:  * Copyright (c) 1992, Garrett A. Wollman.
                      7:  * All rights reserved.
                      8:  *
                      9:  * Redistribution and use in source and binary forms, with or without
                     10:  * modification, are permitted provided that the following conditions
                     11:  * are met:
                     12:  * 1. Redistributions of source code must retain the above copyright
                     13:  *    notice, this list of conditions and the following disclaimer.
                     14:  * 2. Redistributions in binary form must reproduce the above copyright
                     15:  *    notice, this list of conditions and the following disclaimer in the
                     16:  *    documentation and/or other materials provided with the distribution.
                     17:  * 3. All advertising materials mentioning features or use of this software
                     18:  *    must display the following acknowledgement:
                     19:  *     This product includes software developed by the University of
                     20:  *     Vermont and State Agricultural College and Garrett A. Wollman.
                     21:  * 4. Neither the name of the University nor the name of the author
                     22:  *    may be used to endorse or promote products derived from this software
                     23:  *    without specific prior written permission.
                     24:  *
                     25:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
                     26:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     27:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     28:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE
                     29:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
                     30:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
                     31:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
                     32:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
                     33:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
                     34:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
                     35:  * SUCH DAMAGE.
                     36:  */
                     37:
                     38: /*
                     39:  * Intel 82586 Ethernet chip
                     40:  * Register, bit, and structure definitions.
                     41:  *
                     42:  * Written by GAW with reference to the Clarkson Packet Driver code for this
                     43:  * chip written by Russ Nelson and others.
                     44:  */
                     45:
                     46: struct ie_en_addr {
                     47:        u_char data[6];
                     48: };
                     49:
                     50: /*
                     51:  * This is the master configuration block.  It tells the hardware where all
                     52:  * the rest of the stuff is.
                     53:  */
                     54: struct ie_sys_conf_ptr {
                     55:        u_short mbz;                    /* must be zero */
                     56:        u_char ie_bus_use;              /* true if 8-bit only */
                     57:        u_char mbz2[5];                 /* must be zero */
                     58:        caddr_t ie_iscp_ptr;            /* 24-bit physaddr of ISCP */
                     59: };
                     60:
                     61: /*
                     62:  * Note that this is wired in hardware; the SCP is always located here, no
                     63:  * matter what.
                     64:  */
                     65: #define IE_SCP_ADDR 0xfffff4
                     66:
                     67: /*
                     68:  * The tells the hardware where all the rest of the stuff is, too.
                     69:  * FIXME: some of these should be re-commented after we figure out their
                     70:  * REAL function.
                     71:  */
                     72: struct ie_int_sys_conf_ptr {
                     73:        u_char ie_busy;                 /* zeroed after init */
                     74:        u_char mbz;
                     75:        u_short ie_scb_offset;          /* 16-bit physaddr of next struct */
                     76:        caddr_t ie_base;                /* 24-bit physaddr for all 16-bit vars */
                     77: };
                     78:
                     79: /*
                     80:  * This FINALLY tells the hardware what to do and where to put it.
                     81:  */
                     82: struct ie_sys_ctl_block {
                     83:        u_short ie_status;              /* status word */
                     84:        u_short ie_command;             /* command word */
                     85:        u_short ie_command_list;        /* 16-pointer to command block list */
                     86:        u_short ie_recv_list;           /* 16-pointer to receive frame list */
                     87:        u_short ie_err_crc;             /* CRC errors */
                     88:        u_short ie_err_align;           /* Alignment errors */
                     89:        u_short ie_err_resource;        /* Resource errors */
                     90:        u_short ie_err_overrun;         /* Overrun errors */
                     91: };
                     92:
                     93: /* Command values */
                     94: #define IE_RU_COMMAND  0x0070  /* mask for RU command */
                     95: #define IE_RU_NOP      0       /* for completeness */
                     96: #define IE_RU_START    0x0010  /* start receive unit command */
                     97: #define IE_RU_ENABLE   0x0020  /* enable receiver command */
                     98: #define IE_RU_DISABLE  0x0030  /* disable receiver command */
                     99: #define IE_RU_ABORT    0x0040  /* abort current receive operation */
                    100:
                    101: #define IE_CU_COMMAND  0x0700  /* mask for CU command */
                    102: #define IE_CU_NOP      0       /* included for completeness */
                    103: #define IE_CU_START    0x0100  /* do-command command */
                    104: #define IE_CU_RESUME   0x0200  /* resume a suspended cmd list */
                    105: #define IE_CU_STOP     0x0300  /* SUSPEND was already taken */
                    106: #define IE_CU_ABORT    0x0400  /* abort current command */
                    107:
                    108: #define IE_ACK_COMMAND 0xf000  /* mask for ACK command */
                    109: #define IE_ACK_CX      0x8000  /* ack IE_ST_CX */
                    110: #define IE_ACK_FR      0x4000  /* ack IE_ST_FR */
                    111: #define IE_ACK_CNA     0x2000  /* ack IE_ST_CNA */
                    112: #define IE_ACK_RNR     0x1000  /* ack IE_ST_RNR */
                    113:
                    114: #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START)
                    115:                                /* is this command an action command? */
                    116:
                    117: /* Status values */
                    118: #define IE_ST_WHENCE   0xf000  /* mask for cause of interrupt */
                    119: #define IE_ST_CX       0x8000  /* command with I bit completed */
                    120: #define IE_ST_FR       0x4000  /* frame received */
                    121: #define IE_ST_CNA      0x2000  /* all commands completed */
                    122: #define IE_ST_RNR      0x1000  /* receive not ready */
                    123:
                    124: #define IE_CU_STATUS   0x700   /* mask for command unit status */
                    125: #define IE_CU_ACTIVE   0x200   /* command unit is active */
                    126: #define IE_CU_SUSPEND  0x100   /* command unit is suspended */
                    127:
                    128: #define IE_RU_STATUS   0x70    /* mask for receiver unit status */
                    129: #define IE_RU_SUSPEND  0x10    /* receiver is suspended */
                    130: #define IE_RU_NOSPACE  0x20    /* receiver has no resources */
                    131: #define IE_RU_READY    0x40    /* receiver is ready */
                    132:
                    133: /*
                    134:  * This is filled in partially by the chip, partially by us.
                    135:  */
                    136: struct ie_recv_frame_desc {
                    137:        u_short ie_fd_status;           /* status for this frame */
                    138:        u_short ie_fd_last;             /* end of frame list flag */
                    139:        u_short ie_fd_next;             /* 16-pointer to next RFD */
                    140:        u_short ie_fd_buf_desc;         /* 16-pointer to list of buffer desc's */
                    141:        struct ie_en_addr dest;         /* destination ether */
                    142:        struct ie_en_addr src;          /* source ether */
                    143:        u_short ie_length;              /* 802 length/Ether type */
                    144:        u_short mbz;                    /* must be zero */
                    145: };
                    146:
                    147: #define IE_FD_LAST     0x8000  /* last rfd in list */
                    148: #define IE_FD_SUSP     0x4000  /* suspend RU after receipt */
                    149:
                    150: #define IE_FD_COMPLETE 0x8000  /* frame is complete */
                    151: #define IE_FD_BUSY     0x4000  /* frame is busy */
                    152: #define IE_FD_OK       0x2000  /* frame is bad */
                    153: #define IE_FD_RNR      0x0200  /* receiver out of resources here */
                    154:
                    155: /*
                    156:  * linked list of buffers...
                    157:  */
                    158: struct ie_recv_buf_desc {
                    159:        u_short ie_rbd_actual;          /* status for this buffer */
                    160:        u_short ie_rbd_next;            /* 16-pointer to next RBD */
                    161:        caddr_t ie_rbd_buffer;          /* 24-pointer to buffer for this RBD */
                    162:        u_short ie_rbd_length;          /* length of the buffer */
                    163:        u_short mbz;                    /* must be zero */
                    164: };
                    165:
                    166: #define IE_RBD_LAST    0x8000  /* last buffer */
                    167: #define IE_RBD_USED    0x4000  /* this buffer has data */
                    168: /*
                    169:  * All commands share this in common.
                    170:  */
                    171: struct ie_cmd_common {
                    172:        u_short ie_cmd_status;          /* status of this command */
                    173:        u_short ie_cmd_cmd;             /* command word */
                    174:        u_short ie_cmd_link;            /* link to next command */
                    175: };
                    176:
                    177: #define IE_STAT_COMPL  0x8000  /* command is completed */
                    178: #define IE_STAT_BUSY   0x4000  /* command is running now */
                    179: #define IE_STAT_OK     0x2000  /* command completed successfully */
                    180: #define IE_STAT_ABORT  0x1000  /* command was aborted */
                    181:
                    182: #define IE_CMD_NOP     0x0000  /* NOP */
                    183: #define IE_CMD_IASETUP 0x0001  /* initial address setup */
                    184: #define IE_CMD_CONFIG  0x0002  /* configure command */
                    185: #define IE_CMD_MCAST   0x0003  /* multicast setup command */
                    186: #define IE_CMD_XMIT    0x0004  /* transmit command */
                    187: #define IE_CMD_TDR     0x0005  /* time-domain reflectometer command */
                    188: #define IE_CMD_DUMP    0x0006  /* dump command */
                    189: #define IE_CMD_DIAGNOSE        0x0007  /* diagnostics command */
                    190:
                    191: #define IE_CMD_LAST    0x8000  /* this is the last command in the list */
                    192: #define IE_CMD_SUSPEND 0x4000  /* suspend CU after this command */
                    193: #define IE_CMD_INTR    0x2000  /* post an interrupt after completion */
                    194:
                    195: /*
                    196:  * This is the command to transmit a frame.
                    197:  */
                    198: struct ie_xmit_cmd {
                    199:        struct ie_cmd_common com;       /* common part */
                    200: #define ie_xmit_status com.ie_cmd_status
                    201:
                    202:        u_short ie_xmit_desc;           /* 16-pointer to buffer descriptor */
                    203:        struct ie_en_addr ie_xmit_addr; /* destination address */
                    204:
                    205:        u_short ie_xmit_length;         /* 802.3 length/Ether type field */
                    206: };
                    207:
                    208: #define IE_XS_MAXCOLL          0x000f  /* number of collisions during transmit */
                    209: #define IE_XS_EXCMAX   0x0020  /* exceeded maximum number of collisions */
                    210: #define IE_XS_SQE      0x0040  /* SQE positive */
                    211: #define IE_XS_DEFERRED 0x0080  /* transmission deferred */
                    212: #define IE_XS_UNDERRUN 0x0100  /* DMA underrun */
                    213: #define IE_XS_LOSTCTS  0x0200  /* Lost CTS */
                    214: #define IE_XS_NOCARRIER        0x0400  /* No Carrier */
                    215: #define        IE_XS_LATECOLL  0x0800  /* Late collision */
                    216:
                    217: /*
                    218:  * This is a buffer descriptor for a frame to be transmitted.
                    219:  */
                    220:
                    221: struct ie_xmit_buf {
                    222:        u_short ie_xmit_flags;          /* see below */
                    223:        u_short ie_xmit_next;           /* 16-pointer to next desc. */
                    224:        caddr_t ie_xmit_buf;            /* 24-pointer to the actual buffer */
                    225: };
                    226:
                    227: #define IE_XMIT_LAST 0x8000    /* this TBD is the last one */
                    228: /* The rest of the `flags' word is actually the length. */
                    229:
                    230: /*
                    231:  * Multicast setup command.
                    232:  */
                    233:
                    234: #define MAXMCAST 250           /* must fit in transmit buffer */
                    235:
                    236: struct ie_mcast_cmd {
                    237:        struct ie_cmd_common com;       /* common part */
                    238: #define ie_mcast_status com.ie_cmd_status
                    239:
                    240:        u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */
                    241:        struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */
                    242: };
                    243:
                    244: /*
                    245:  * Time Domain Reflectometer command.
                    246:  */
                    247:
                    248: struct ie_tdr_cmd {
                    249:        struct ie_cmd_common com;       /* common part */
                    250: #define ie_tdr_status com.ie_cmd_status
                    251:
                    252:        u_short ie_tdr_time;            /* error bits and time */
                    253: };
                    254:
                    255: #define IE_TDR_SUCCESS 0x8000  /* TDR succeeded without error */
                    256: #define IE_TDR_XCVR    0x4000  /* detected a transceiver problem */
                    257: #define IE_TDR_OPEN    0x2000  /* detected an open */
                    258: #define IE_TDR_SHORT   0x1000  /* TDR detected a short */
                    259: #define IE_TDR_TIME    0x07ff  /* mask for reflection time */
                    260:
                    261: /*
                    262:  * Initial Address Setup command
                    263:  */
                    264: struct ie_iasetup_cmd {
                    265:        struct ie_cmd_common com;
                    266: #define ie_iasetup_status com.ie_cmd_status
                    267:
                    268:        struct ie_en_addr ie_address;
                    269: };
                    270:
                    271: /*
                    272:  * Configuration command
                    273:  */
                    274: struct ie_config_cmd {
                    275:        struct ie_cmd_common com;       /* common part */
                    276: #define ie_config_status com.ie_cmd_status
                    277:
                    278:        u_char ie_config_count;         /* byte count (0x0c) */
                    279:        u_char ie_fifo;                 /* fifo (8) */
                    280:        u_char ie_save_bad;             /* save bad frames (0x40) */
                    281:        u_char ie_addr_len;             /* address length (0x2e) (AL-LOC == 1) */
                    282:        u_char ie_priority;             /* priority and backoff (0x0) */
                    283:        u_char ie_ifs;                  /* inter-frame spacing (0x60) */
                    284:        u_char ie_slot_low;             /* slot time, LSB (0x0) */
                    285:        u_char ie_slot_high;            /* slot time, MSN, and retries (0xf2) */
                    286:        u_char ie_promisc;              /* 1 if promiscuous, else 0 */
                    287:        u_char ie_crs_cdt;              /* CSMA/CD parameters (0x0) */
                    288:        u_char ie_min_len;              /* min frame length (0x40) */
                    289:        u_char ie_junk;                 /* stuff for 82596 (0xff) */
                    290: };

CVSweb