[BACK]Return to i82586reg.h CVS log [TXT][DIR] Up to [local] / sys / dev / ic

Annotation of sys/dev/ic/i82586reg.h, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: i82586reg.h,v 1.3 2003/10/21 18:58:49 jmc Exp $       */
        !             2: /*     $NetBSD: i82586reg.h,v 1.5 1995/04/04 01:59:34 mycroft Exp $    */
        !             3:
        !             4: /*-
        !             5:  * Copyright (c) 1992, University of Vermont and State Agricultural College.
        !             6:  * Copyright (c) 1992, Garrett A. Wollman.
        !             7:  * All rights reserved.
        !             8:  *
        !             9:  * Redistribution and use in source and binary forms, with or without
        !            10:  * modification, are permitted provided that the following conditions
        !            11:  * are met:
        !            12:  * 1. Redistributions of source code must retain the above copyright
        !            13:  *    notice, this list of conditions and the following disclaimer.
        !            14:  * 2. Redistributions in binary form must reproduce the above copyright
        !            15:  *    notice, this list of conditions and the following disclaimer in the
        !            16:  *    documentation and/or other materials provided with the distribution.
        !            17:  * 3. All advertising materials mentioning features or use of this software
        !            18:  *    must display the following acknowledgement:
        !            19:  *     This product includes software developed by the University of
        !            20:  *     Vermont and State Agricultural College and Garrett A. Wollman.
        !            21:  * 4. Neither the name of the University nor the name of the author
        !            22:  *    may be used to endorse or promote products derived from this software
        !            23:  *    without specific prior written permission.
        !            24:  *
        !            25:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
        !            26:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
        !            27:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
        !            28:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE
        !            29:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
        !            30:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
        !            31:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
        !            32:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
        !            33:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
        !            34:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
        !            35:  * SUCH DAMAGE.
        !            36:  */
        !            37:
        !            38: /*
        !            39:  * Intel 82586 Ethernet chip
        !            40:  * Register, bit, and structure definitions.
        !            41:  *
        !            42:  * Written by GAW with reference to the Clarkson Packet Driver code for this
        !            43:  * chip written by Russ Nelson and others.
        !            44:  */
        !            45:
        !            46: struct ie_en_addr {
        !            47:        u_char data[6];
        !            48: };
        !            49:
        !            50: /*
        !            51:  * This is the master configuration block.  It tells the hardware where all
        !            52:  * the rest of the stuff is.
        !            53:  */
        !            54: struct ie_sys_conf_ptr {
        !            55:        u_short mbz;                    /* must be zero */
        !            56:        u_char ie_bus_use;              /* true if 8-bit only */
        !            57:        u_char mbz2[5];                 /* must be zero */
        !            58:        caddr_t ie_iscp_ptr;            /* 24-bit physaddr of ISCP */
        !            59: };
        !            60:
        !            61: /*
        !            62:  * Note that this is wired in hardware; the SCP is always located here, no
        !            63:  * matter what.
        !            64:  */
        !            65: #define IE_SCP_ADDR 0xfffff4
        !            66:
        !            67: /*
        !            68:  * The tells the hardware where all the rest of the stuff is, too.
        !            69:  * FIXME: some of these should be re-commented after we figure out their
        !            70:  * REAL function.
        !            71:  */
        !            72: struct ie_int_sys_conf_ptr {
        !            73:        u_char ie_busy;                 /* zeroed after init */
        !            74:        u_char mbz;
        !            75:        u_short ie_scb_offset;          /* 16-bit physaddr of next struct */
        !            76:        caddr_t ie_base;                /* 24-bit physaddr for all 16-bit vars */
        !            77: };
        !            78:
        !            79: /*
        !            80:  * This FINALLY tells the hardware what to do and where to put it.
        !            81:  */
        !            82: struct ie_sys_ctl_block {
        !            83:        u_short ie_status;              /* status word */
        !            84:        u_short ie_command;             /* command word */
        !            85:        u_short ie_command_list;        /* 16-pointer to command block list */
        !            86:        u_short ie_recv_list;           /* 16-pointer to receive frame list */
        !            87:        u_short ie_err_crc;             /* CRC errors */
        !            88:        u_short ie_err_align;           /* Alignment errors */
        !            89:        u_short ie_err_resource;        /* Resource errors */
        !            90:        u_short ie_err_overrun;         /* Overrun errors */
        !            91: };
        !            92:
        !            93: /* Command values */
        !            94: #define IE_RU_COMMAND  0x0070  /* mask for RU command */
        !            95: #define IE_RU_NOP      0       /* for completeness */
        !            96: #define IE_RU_START    0x0010  /* start receive unit command */
        !            97: #define IE_RU_ENABLE   0x0020  /* enable receiver command */
        !            98: #define IE_RU_DISABLE  0x0030  /* disable receiver command */
        !            99: #define IE_RU_ABORT    0x0040  /* abort current receive operation */
        !           100:
        !           101: #define IE_CU_COMMAND  0x0700  /* mask for CU command */
        !           102: #define IE_CU_NOP      0       /* included for completeness */
        !           103: #define IE_CU_START    0x0100  /* do-command command */
        !           104: #define IE_CU_RESUME   0x0200  /* resume a suspended cmd list */
        !           105: #define IE_CU_STOP     0x0300  /* SUSPEND was already taken */
        !           106: #define IE_CU_ABORT    0x0400  /* abort current command */
        !           107:
        !           108: #define IE_ACK_COMMAND 0xf000  /* mask for ACK command */
        !           109: #define IE_ACK_CX      0x8000  /* ack IE_ST_CX */
        !           110: #define IE_ACK_FR      0x4000  /* ack IE_ST_FR */
        !           111: #define IE_ACK_CNA     0x2000  /* ack IE_ST_CNA */
        !           112: #define IE_ACK_RNR     0x1000  /* ack IE_ST_RNR */
        !           113:
        !           114: #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START)
        !           115:                                /* is this command an action command? */
        !           116:
        !           117: /* Status values */
        !           118: #define IE_ST_WHENCE   0xf000  /* mask for cause of interrupt */
        !           119: #define IE_ST_CX       0x8000  /* command with I bit completed */
        !           120: #define IE_ST_FR       0x4000  /* frame received */
        !           121: #define IE_ST_CNA      0x2000  /* all commands completed */
        !           122: #define IE_ST_RNR      0x1000  /* receive not ready */
        !           123:
        !           124: #define IE_CU_STATUS   0x700   /* mask for command unit status */
        !           125: #define IE_CU_ACTIVE   0x200   /* command unit is active */
        !           126: #define IE_CU_SUSPEND  0x100   /* command unit is suspended */
        !           127:
        !           128: #define IE_RU_STATUS   0x70    /* mask for receiver unit status */
        !           129: #define IE_RU_SUSPEND  0x10    /* receiver is suspended */
        !           130: #define IE_RU_NOSPACE  0x20    /* receiver has no resources */
        !           131: #define IE_RU_READY    0x40    /* receiver is ready */
        !           132:
        !           133: /*
        !           134:  * This is filled in partially by the chip, partially by us.
        !           135:  */
        !           136: struct ie_recv_frame_desc {
        !           137:        u_short ie_fd_status;           /* status for this frame */
        !           138:        u_short ie_fd_last;             /* end of frame list flag */
        !           139:        u_short ie_fd_next;             /* 16-pointer to next RFD */
        !           140:        u_short ie_fd_buf_desc;         /* 16-pointer to list of buffer desc's */
        !           141:        struct ie_en_addr dest;         /* destination ether */
        !           142:        struct ie_en_addr src;          /* source ether */
        !           143:        u_short ie_length;              /* 802 length/Ether type */
        !           144:        u_short mbz;                    /* must be zero */
        !           145: };
        !           146:
        !           147: #define IE_FD_LAST     0x8000  /* last rfd in list */
        !           148: #define IE_FD_SUSP     0x4000  /* suspend RU after receipt */
        !           149:
        !           150: #define IE_FD_COMPLETE 0x8000  /* frame is complete */
        !           151: #define IE_FD_BUSY     0x4000  /* frame is busy */
        !           152: #define IE_FD_OK       0x2000  /* frame is bad */
        !           153: #define IE_FD_RNR      0x0200  /* receiver out of resources here */
        !           154:
        !           155: /*
        !           156:  * linked list of buffers...
        !           157:  */
        !           158: struct ie_recv_buf_desc {
        !           159:        u_short ie_rbd_actual;          /* status for this buffer */
        !           160:        u_short ie_rbd_next;            /* 16-pointer to next RBD */
        !           161:        caddr_t ie_rbd_buffer;          /* 24-pointer to buffer for this RBD */
        !           162:        u_short ie_rbd_length;          /* length of the buffer */
        !           163:        u_short mbz;                    /* must be zero */
        !           164: };
        !           165:
        !           166: #define IE_RBD_LAST    0x8000  /* last buffer */
        !           167: #define IE_RBD_USED    0x4000  /* this buffer has data */
        !           168: /*
        !           169:  * All commands share this in common.
        !           170:  */
        !           171: struct ie_cmd_common {
        !           172:        u_short ie_cmd_status;          /* status of this command */
        !           173:        u_short ie_cmd_cmd;             /* command word */
        !           174:        u_short ie_cmd_link;            /* link to next command */
        !           175: };
        !           176:
        !           177: #define IE_STAT_COMPL  0x8000  /* command is completed */
        !           178: #define IE_STAT_BUSY   0x4000  /* command is running now */
        !           179: #define IE_STAT_OK     0x2000  /* command completed successfully */
        !           180: #define IE_STAT_ABORT  0x1000  /* command was aborted */
        !           181:
        !           182: #define IE_CMD_NOP     0x0000  /* NOP */
        !           183: #define IE_CMD_IASETUP 0x0001  /* initial address setup */
        !           184: #define IE_CMD_CONFIG  0x0002  /* configure command */
        !           185: #define IE_CMD_MCAST   0x0003  /* multicast setup command */
        !           186: #define IE_CMD_XMIT    0x0004  /* transmit command */
        !           187: #define IE_CMD_TDR     0x0005  /* time-domain reflectometer command */
        !           188: #define IE_CMD_DUMP    0x0006  /* dump command */
        !           189: #define IE_CMD_DIAGNOSE        0x0007  /* diagnostics command */
        !           190:
        !           191: #define IE_CMD_LAST    0x8000  /* this is the last command in the list */
        !           192: #define IE_CMD_SUSPEND 0x4000  /* suspend CU after this command */
        !           193: #define IE_CMD_INTR    0x2000  /* post an interrupt after completion */
        !           194:
        !           195: /*
        !           196:  * This is the command to transmit a frame.
        !           197:  */
        !           198: struct ie_xmit_cmd {
        !           199:        struct ie_cmd_common com;       /* common part */
        !           200: #define ie_xmit_status com.ie_cmd_status
        !           201:
        !           202:        u_short ie_xmit_desc;           /* 16-pointer to buffer descriptor */
        !           203:        struct ie_en_addr ie_xmit_addr; /* destination address */
        !           204:
        !           205:        u_short ie_xmit_length;         /* 802.3 length/Ether type field */
        !           206: };
        !           207:
        !           208: #define IE_XS_MAXCOLL          0x000f  /* number of collisions during transmit */
        !           209: #define IE_XS_EXCMAX   0x0020  /* exceeded maximum number of collisions */
        !           210: #define IE_XS_SQE      0x0040  /* SQE positive */
        !           211: #define IE_XS_DEFERRED 0x0080  /* transmission deferred */
        !           212: #define IE_XS_UNDERRUN 0x0100  /* DMA underrun */
        !           213: #define IE_XS_LOSTCTS  0x0200  /* Lost CTS */
        !           214: #define IE_XS_NOCARRIER        0x0400  /* No Carrier */
        !           215: #define        IE_XS_LATECOLL  0x0800  /* Late collision */
        !           216:
        !           217: /*
        !           218:  * This is a buffer descriptor for a frame to be transmitted.
        !           219:  */
        !           220:
        !           221: struct ie_xmit_buf {
        !           222:        u_short ie_xmit_flags;          /* see below */
        !           223:        u_short ie_xmit_next;           /* 16-pointer to next desc. */
        !           224:        caddr_t ie_xmit_buf;            /* 24-pointer to the actual buffer */
        !           225: };
        !           226:
        !           227: #define IE_XMIT_LAST 0x8000    /* this TBD is the last one */
        !           228: /* The rest of the `flags' word is actually the length. */
        !           229:
        !           230: /*
        !           231:  * Multicast setup command.
        !           232:  */
        !           233:
        !           234: #define MAXMCAST 250           /* must fit in transmit buffer */
        !           235:
        !           236: struct ie_mcast_cmd {
        !           237:        struct ie_cmd_common com;       /* common part */
        !           238: #define ie_mcast_status com.ie_cmd_status
        !           239:
        !           240:        u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */
        !           241:        struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */
        !           242: };
        !           243:
        !           244: /*
        !           245:  * Time Domain Reflectometer command.
        !           246:  */
        !           247:
        !           248: struct ie_tdr_cmd {
        !           249:        struct ie_cmd_common com;       /* common part */
        !           250: #define ie_tdr_status com.ie_cmd_status
        !           251:
        !           252:        u_short ie_tdr_time;            /* error bits and time */
        !           253: };
        !           254:
        !           255: #define IE_TDR_SUCCESS 0x8000  /* TDR succeeded without error */
        !           256: #define IE_TDR_XCVR    0x4000  /* detected a transceiver problem */
        !           257: #define IE_TDR_OPEN    0x2000  /* detected an open */
        !           258: #define IE_TDR_SHORT   0x1000  /* TDR detected a short */
        !           259: #define IE_TDR_TIME    0x07ff  /* mask for reflection time */
        !           260:
        !           261: /*
        !           262:  * Initial Address Setup command
        !           263:  */
        !           264: struct ie_iasetup_cmd {
        !           265:        struct ie_cmd_common com;
        !           266: #define ie_iasetup_status com.ie_cmd_status
        !           267:
        !           268:        struct ie_en_addr ie_address;
        !           269: };
        !           270:
        !           271: /*
        !           272:  * Configuration command
        !           273:  */
        !           274: struct ie_config_cmd {
        !           275:        struct ie_cmd_common com;       /* common part */
        !           276: #define ie_config_status com.ie_cmd_status
        !           277:
        !           278:        u_char ie_config_count;         /* byte count (0x0c) */
        !           279:        u_char ie_fifo;                 /* fifo (8) */
        !           280:        u_char ie_save_bad;             /* save bad frames (0x40) */
        !           281:        u_char ie_addr_len;             /* address length (0x2e) (AL-LOC == 1) */
        !           282:        u_char ie_priority;             /* priority and backoff (0x0) */
        !           283:        u_char ie_ifs;                  /* inter-frame spacing (0x60) */
        !           284:        u_char ie_slot_low;             /* slot time, LSB (0x0) */
        !           285:        u_char ie_slot_high;            /* slot time, MSN, and retries (0xf2) */
        !           286:        u_char ie_promisc;              /* 1 if promiscuous, else 0 */
        !           287:        u_char ie_crs_cdt;              /* CSMA/CD parameters (0x0) */
        !           288:        u_char ie_min_len;              /* min frame length (0x40) */
        !           289:        u_char ie_junk;                 /* stuff for 82596 (0xff) */
        !           290: };

CVSweb