Annotation of sys/dev/ic/hmereg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: hmereg.h,v 1.8 2005/02/04 05:02:38 brad Exp $ */
! 2: /* $NetBSD: hmereg.h,v 1.8 2001/04/30 12:22:42 bouyer Exp $ */
! 3:
! 4: /*-
! 5: * Copyright (c) 1999 The NetBSD Foundation, Inc.
! 6: * All rights reserved.
! 7: *
! 8: * This code is derived from software contributed to The NetBSD Foundation
! 9: * by Paul Kranenburg.
! 10: *
! 11: * Redistribution and use in source and binary forms, with or without
! 12: * modification, are permitted provided that the following conditions
! 13: * are met:
! 14: * 1. Redistributions of source code must retain the above copyright
! 15: * notice, this list of conditions and the following disclaimer.
! 16: * 2. Redistributions in binary form must reproduce the above copyright
! 17: * notice, this list of conditions and the following disclaimer in the
! 18: * documentation and/or other materials provided with the distribution.
! 19: * 3. All advertising materials mentioning features or use of this software
! 20: * must display the following acknowledgement:
! 21: * This product includes software developed by the NetBSD
! 22: * Foundation, Inc. and its contributors.
! 23: * 4. Neither the name of The NetBSD Foundation nor the names of its
! 24: * contributors may be used to endorse or promote products derived
! 25: * from this software without specific prior written permission.
! 26: *
! 27: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
! 28: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
! 29: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
! 30: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
! 31: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 32: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 33: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 34: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 35: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 36: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
! 37: * POSSIBILITY OF SUCH DAMAGE.
! 38: */
! 39:
! 40: /*
! 41: * HME Shared Ethernet Block register offsets
! 42: */
! 43: #define HME_SEBI_RESET (0*4)
! 44: #define HME_SEBI_CFG (1*4)
! 45: #define HME_SEBI_STAT (64*4)
! 46: #define HME_SEBI_IMASK (65*4)
! 47:
! 48: /* HME SEB bits. */
! 49: #define HME_SEB_RESET_ETX 0x00000001 /* reset external transmitter */
! 50: #define HME_SEB_RESET_ERX 0x00000002 /* reset external receiver */
! 51:
! 52: #define HME_SEB_CFG_BURSTMASK 0x00000003 /* covers all burst bits */
! 53: #define HME_SEB_CFG_BURST16 0x00000000 /* 16 byte bursts */
! 54: #define HME_SEB_CFG_BURST32 0x00000001 /* 32 byte bursts */
! 55: #define HME_SEB_CFG_BURST64 0x00000002 /* 64 byte bursts */
! 56: #define HME_SEB_CFG_64BIT 0x00000004 /* ? */
! 57: #define HME_SEB_CFG_PARITY 0x00000008 /* ? */
! 58:
! 59: #define HME_SEB_STAT_GOTFRAME 0x00000001 /* frame received */
! 60: #define HME_SEB_STAT_RCNTEXP 0x00000002 /* rx frame count expired */
! 61: #define HME_SEB_STAT_ACNTEXP 0x00000004 /* align error count expired */
! 62: #define HME_SEB_STAT_CCNTEXP 0x00000008 /* crc error count expired */
! 63: #define HME_SEB_STAT_LCNTEXP 0x00000010 /* length error count expired */
! 64: #define HME_SEB_STAT_RFIFOVF 0x00000020 /* rx fifo overflow */
! 65: #define HME_SEB_STAT_CVCNTEXP 0x00000040 /* code violation counter exp */
! 66: #define HME_SEB_STAT_STSTERR 0x00000080 /* xif sqe test failed */
! 67: #define HME_SEB_STAT_SENTFRAME 0x00000100 /* frame sent */
! 68: #define HME_SEB_STAT_TFIFO_UND 0x00000200 /* tx fifo underrun */
! 69: #define HME_SEB_STAT_MAXPKTERR 0x00000400 /* max-packet size error */
! 70: #define HME_SEB_STAT_NCNTEXP 0x00000800 /* normal collision count exp */
! 71: #define HME_SEB_STAT_ECNTEXP 0x00001000 /* excess collision count exp */
! 72: #define HME_SEB_STAT_LCCNTEXP 0x00002000 /* late collision count exp */
! 73: #define HME_SEB_STAT_FCNTEXP 0x00004000 /* first collision count exp */
! 74: #define HME_SEB_STAT_DTIMEXP 0x00008000 /* defer timer expired */
! 75: #define HME_SEB_STAT_RXTOHOST 0x00010000 /* pkt moved from rx fifo->memory */
! 76: #define HME_SEB_STAT_NORXD 0x00020000 /* out of receive descriptors */
! 77: #define HME_SEB_STAT_RXERR 0x00040000 /* rx dma error */
! 78: #define HME_SEB_STAT_RXLATERR 0x00080000 /* late error during rx dma */
! 79: #define HME_SEB_STAT_RXPERR 0x00100000 /* parity error during rx dma */
! 80: #define HME_SEB_STAT_RXTERR 0x00200000 /* tag error during rx dma */
! 81: #define HME_SEB_STAT_EOPERR 0x00400000 /* tx descriptor did not set EOP */
! 82: #define HME_SEB_STAT_MIFIRQ 0x00800000 /* mif needs attention */
! 83: #define HME_SEB_STAT_HOSTTOTX 0x01000000 /* pkt moved from memory->tx fifo */
! 84: #define HME_SEB_STAT_TXALL 0x02000000 /* all pkts in fifo transmitted */
! 85: #define HME_SEB_STAT_TXEACK 0x04000000 /* error during tx dma */
! 86: #define HME_SEB_STAT_TXLERR 0x08000000 /* late error during tx dma */
! 87: #define HME_SEB_STAT_TXPERR 0x10000000 /* parity error during tx dma */
! 88: #define HME_SEB_STAT_TXTERR 0x20000000 /* tag error durig tx dma */
! 89: #define HME_SEB_STAT_SLVERR 0x40000000 /* pio access error */
! 90: #define HME_SEB_STAT_SLVPERR 0x80000000 /* pio access parity error */
! 91: #define HME_SEB_STAT_BITS \
! 92: "\020\1RX\2RCNT\3ACNT\4CCNT\5LCNT\6RFIFO\7CVCNT\10STST" \
! 93: "\11TX\12TFIFO\13MAXPKT\14NCNT\15ECNT\16LCCNT\17FCNT" \
! 94: "\20DTIME\21RXHOST\22NORXD\23RXE\24EXLATE\25RXP\26RXT\27EOP" \
! 95: "\30MIF\31TXHOST\32TXALL\33TXE\34TXL\35TXP\36TXT\37SLV" \
! 96: "\40SLVP"
! 97:
! 98:
! 99: #define HME_SEB_STAT_ALL_ERRORS \
! 100: (HME_SEB_STAT_SLVPERR | HME_SEB_STAT_SLVERR | HME_SEB_STAT_TXTERR |\
! 101: HME_SEB_STAT_TXPERR | HME_SEB_STAT_TXLERR | HME_SEB_STAT_TXEACK |\
! 102: HME_SEB_STAT_EOPERR | HME_SEB_STAT_RXTERR | HME_SEB_STAT_RXPERR |\
! 103: HME_SEB_STAT_RXLATERR | HME_SEB_STAT_RXERR | HME_SEB_STAT_NORXD |\
! 104: HME_SEB_STAT_DTIMEXP | HME_SEB_STAT_FCNTEXP | HME_SEB_STAT_LCCNTEXP |\
! 105: HME_SEB_STAT_ECNTEXP | HME_SEB_STAT_NCNTEXP | HME_SEB_STAT_MAXPKTERR|\
! 106: HME_SEB_STAT_TFIFO_UND| HME_SEB_STAT_STSTERR | HME_SEB_STAT_CVCNTEXP |\
! 107: HME_SEB_STAT_LCNTEXP | HME_SEB_STAT_CCNTEXP| HME_SEB_STAT_ACNTEXP)
! 108:
! 109: #define HME_SEB_STAT_VLAN_ERRORS \
! 110: (HME_SEB_STAT_SLVPERR | HME_SEB_STAT_SLVERR | HME_SEB_STAT_TXTERR |\
! 111: HME_SEB_STAT_TXPERR | HME_SEB_STAT_TXLERR | HME_SEB_STAT_TXEACK |\
! 112: HME_SEB_STAT_EOPERR | HME_SEB_STAT_RXTERR | HME_SEB_STAT_RXPERR |\
! 113: HME_SEB_STAT_RXLATERR | HME_SEB_STAT_RXERR | HME_SEB_STAT_NORXD |\
! 114: HME_SEB_STAT_DTIMEXP | HME_SEB_STAT_FCNTEXP | HME_SEB_STAT_LCCNTEXP |\
! 115: HME_SEB_STAT_ECNTEXP | HME_SEB_STAT_NCNTEXP | \
! 116: HME_SEB_STAT_TFIFO_UND| HME_SEB_STAT_STSTERR | HME_SEB_STAT_CVCNTEXP |\
! 117: HME_SEB_STAT_LCNTEXP | HME_SEB_STAT_CCNTEXP | HME_SEB_STAT_ACNTEXP)
! 118:
! 119: /*
! 120: * HME Transmitter register offsets
! 121: */
! 122: #define HME_ETXI_PENDING (0*4) /* Pending/wakeup */
! 123: #define HME_ETXI_CFG (1*4)
! 124: #define HME_ETXI_RING (2*4) /* Descriptor Ring pointer */
! 125: #define HME_ETXI_BBASE (3*4) /* Buffer base address (ro) */
! 126: #define HME_ETXI_BDISP (4*4) /* Buffer displacement (ro) */
! 127: #define HME_ETXI_FIFO_WPTR (5*4) /* FIFO write pointer */
! 128: #define HME_ETXI_FIFO_SWPTR (6*4) /* FIFO shadow write pointer */
! 129: #define HME_ETXI_FIFO_RPTR (7*4) /* FIFO read pointer */
! 130: #define HME_ETXI_FIFO_SRPTR (8*4) /* FIFO shadow read pointer */
! 131: #define HME_ETXI_FIFO_PKTCNT (9*4) /* FIFO packet counter */
! 132: #define HME_ETXI_STATEMACHINE (10*4) /* State machine */
! 133: #define HME_ETXI_RSIZE (11*4) /* Ring size */
! 134: #define HME_ETXI_BPTR (12*4) /* Buffer pointer */
! 135:
! 136:
! 137: /* TXI_PENDING bits */
! 138: #define HME_ETX_TP_DMAWAKEUP 0x00000001 /* Start tx (rw, auto-clear) */
! 139:
! 140: /* TXI_CFG bits */
! 141: #define HME_ETX_CFG_DMAENABLE 0x00000001 /* Enable TX dma */
! 142: #define HME_ETX_CFG_FIFOTHRESH 0x000003fe /* TX fifo threshold */
! 143: #define HME_ETX_CFG_IRQDAFTER 0x00000400 /* Intr after tx-fifo empty */
! 144: #define HME_ETX_CFG_IRQDBEFORE 0x00000000 /* Intr before tx-fifo empty */
! 145:
! 146:
! 147: /*
! 148: * HME Receiver register offsets
! 149: */
! 150: #define HME_ERXI_CFG (0*4)
! 151: #define HME_ERXI_RING (1*4) /* Descriptor Ring pointer */
! 152: #define HME_ERXI_BPTR (2*4) /* Data Buffer pointer (ro) */
! 153: #define HME_ERXI_FIFO_WPTR (3*4) /* FIFO write pointer */
! 154: #define HME_ERXI_FIFO_SWPTR (4*4) /* FIFO shadow write pointer */
! 155: #define HME_ERXI_FIFO_RPTR (5*4) /* FIFO read pointer */
! 156: #define HME_ERXI_FIFO_SRPTR (6*4) /* FIFO shadow read pointer */
! 157: #define HME_ERXI_STATEMACHINE (7*4) /* State machine */
! 158:
! 159: /* RXI_CFG bits */
! 160: #define HME_ERX_CFG_DMAENABLE 0x00000001 /* Enable RX dma */
! 161: #define HME_ERX_CFG_BYTEOFFSET 0x00000038 /* RX first byte offset */
! 162: #define HME_ERX_CFG_RINGSIZE32 0x00000000 /* Descriptor ring size: 32 */
! 163: #define HME_ERX_CFG_RINGSIZE64 0x00000200 /* Descriptor ring size: 64 */
! 164: #define HME_ERX_CFG_RINGSIZE128 0x00000400 /* Descriptor ring size: 128 */
! 165: #define HME_ERX_CFG_RINGSIZE256 0x00000600 /* Descriptor ring size: 256 */
! 166: #define HME_ERX_CFG_CSUMSTART 0x007f0000 /* cksum offset */
! 167: #define HME_ERX_CFG_CSUM_SHIFT 16
! 168:
! 169: /*
! 170: * HME MAC-core register offsets
! 171: */
! 172: #define HME_MACI_XIF (0*4)
! 173: #define HME_MACI_TXSWRST (130*4) /* TX reset */
! 174: #define HME_MACI_TXCFG (131*4) /* TX config */
! 175: #define HME_MACI_JSIZE (139*4) /* TX jam size */
! 176: #define HME_MACI_TXSIZE (140*4) /* TX max size */
! 177: #define HME_MACI_NCCNT (144*4) /* TX normal collision cnt */
! 178: #define HME_MACI_FCCNT (145*4) /* TX first collision cnt */
! 179: #define HME_MACI_EXCNT (146*4) /* TX excess collision cnt */
! 180: #define HME_MACI_LTCNT (147*4) /* TX late collision cnt */
! 181: #define HME_MACI_RANDSEED (148*4) /* */
! 182: #define HME_MACI_RXSWRST (194*4) /* RX reset */
! 183: #define HME_MACI_RXCFG (195*4) /* RX config */
! 184: #define HME_MACI_RXSIZE (196*4) /* RX max size */
! 185: #define HME_MACI_MACADDR2 (198*4) /* MAC address */
! 186: #define HME_MACI_MACADDR1 (199*4)
! 187: #define HME_MACI_MACADDR0 (200*4)
! 188: #define HME_MACI_HASHTAB3 (208*4) /* Address hash table */
! 189: #define HME_MACI_HASHTAB2 (209*4)
! 190: #define HME_MACI_HASHTAB1 (210*4)
! 191: #define HME_MACI_HASHTAB0 (211*4)
! 192: #define HME_MACI_AFILTER2 (212*4) /* Address filter */
! 193: #define HME_MACI_AFILTER1 (213*4)
! 194: #define HME_MACI_AFILTER0 (214*4)
! 195: #define HME_MACI_AFILTER_MASK (215*4)
! 196:
! 197: /* XIF config register. */
! 198: #define HME_MAC_XIF_OE 0x00000001 /* Output driver enable */
! 199: #define HME_MAC_XIF_XLBACK 0x00000002 /* Loopback-mode XIF enable */
! 200: #define HME_MAC_XIF_MLBACK 0x00000004 /* Loopback-mode MII enable */
! 201: #define HME_MAC_XIF_MIIENABLE 0x00000008 /* MII receive buffer enable */
! 202: #define HME_MAC_XIF_SQENABLE 0x00000010 /* SQE test enable */
! 203: #define HME_MAC_XIF_SQETWIN 0x000003e0 /* SQE time window */
! 204: #define HME_MAC_XIF_LANCE 0x00000010 /* Lance mode enable */
! 205: #define HME_MAC_XIF_LIPG0 0x000003e0 /* Lance mode IPG0 */
! 206:
! 207: /* Transmit config register. */
! 208: #define HME_MAC_TXCFG_ENABLE 0x00000001 /* Enable the transmitter */
! 209: #define HME_MAC_TXCFG_SMODE 0x00000020 /* Enable slow transmit mode */
! 210: #define HME_MAC_TXCFG_CIGN 0x00000040 /* Ignore transmit collisions */
! 211: #define HME_MAC_TXCFG_FCSOFF 0x00000080 /* Do not emit FCS */
! 212: #define HME_MAC_TXCFG_DBACKOFF 0x00000100 /* Disable backoff */
! 213: #define HME_MAC_TXCFG_FULLDPLX 0x00000200 /* Enable full-duplex */
! 214: #define HME_MAC_TXCFG_DGIVEUP 0x00000400 /* Don't give up on transmits */
! 215:
! 216: /* Receive config register. */
! 217: #define HME_MAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
! 218: #define HME_MAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
! 219: #define HME_MAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
! 220: #define HME_MAC_RXCFG_DERR 0x00000080 /* Disable error checking */
! 221: #define HME_MAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
! 222: #define HME_MAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */
! 223: #define HME_MAC_RXCFG_PGRP 0x00000400 /* Enable promisc group mode */
! 224: #define HME_MAC_RXCFG_HENABLE 0x00000800 /* Enable the hash filter */
! 225: #define HME_MAC_RXCFG_AENABLE 0x00001000 /* Enable the address filter */
! 226:
! 227: /*
! 228: * HME MIF register offsets
! 229: */
! 230: #define HME_MIFI_BB_CLK (0*4) /* bit-bang clock */
! 231: #define HME_MIFI_BB_DATA (1*4) /* bit-bang data */
! 232: #define HME_MIFI_BB_OE (2*4) /* bit-bang output enable */
! 233: #define HME_MIFI_FO (3*4) /* frame output */
! 234: #define HME_MIFI_CFG (4*4) /* mif configuration */
! 235: #define HME_MIFI_IMASK (5*4) /* Interrupt mask for status change */
! 236: #define HME_MIFI_STAT (6*4) /* Status (ro, auto-clear) */
! 237: #define HME_MIFI_SM (7*4) /* State machine (ro) */
! 238:
! 239: /* MIF Configuration register */
! 240: #define HME_MIF_CFG_PHY 0x00000001 /* PHY select */
! 241: #define HME_MIF_CFG_PE 0x00000002 /* Poll enable */
! 242: #define HME_MIF_CFG_BBMODE 0x00000004 /* Bit-bang mode */
! 243: #define HME_MIF_CFG_PRADDR 0x000000f8 /* Poll register address */
! 244: #define HME_MIF_CFG_MDI0 0x00000100 /* MDI_0 (ro) */
! 245: #define HME_MIF_CFG_MDI1 0x00000200 /* MDI_1 (ro) */
! 246: #define HME_MIF_CFG_PPADDR 0x00007c00 /* Poll phy address */
! 247:
! 248: /* MIF Frame/Output register */
! 249: #define HME_MIF_FO_ST 0xc0000000 /* Start of frame */
! 250: #define HME_MIF_FO_ST_SHIFT 30 /* */
! 251: #define HME_MIF_FO_OPC 0x30000000 /* Opcode */
! 252: #define HME_MIF_FO_OPC_SHIFT 28 /* */
! 253: #define HME_MIF_FO_PHYAD 0x0f800000 /* PHY Address */
! 254: #define HME_MIF_FO_PHYAD_SHIFT 23 /* */
! 255: #define HME_MIF_FO_REGAD 0x007c0000 /* Register Address */
! 256: #define HME_MIF_FO_REGAD_SHIFT 18 /* */
! 257: #define HME_MIF_FO_TAMSB 0x00020000 /* Turn-around MSB */
! 258: #define HME_MIF_FO_TALSB 0x00010000 /* Turn-around LSB */
! 259: #define HME_MIF_FO_DATA 0x0000ffff /* data to read or write */
! 260:
! 261: /* Wired HME PHY addresses */
! 262: #define HME_PHYAD_INTERNAL 1
! 263: #define HME_PHYAD_EXTERNAL 0
! 264:
! 265: /*
! 266: * Buffer Descriptors.
! 267: */
! 268: #ifdef notdef
! 269: struct hme_xd {
! 270: volatile u_int32_t xd_flags;
! 271: volatile u_int32_t xd_addr; /* Buffer address (DMA) */
! 272: };
! 273: #endif
! 274: #define HME_XD_SIZE 8
! 275: #define HME_XD_FLAGS(base, index) ((base) + ((index) * HME_XD_SIZE) + 0)
! 276: #define HME_XD_ADDR(base, index) ((base) + ((index) * HME_XD_SIZE) + 4)
! 277: #define HME_XD_GETFLAGS(p, b, i) \
! 278: (p) ? letoh32(*((u_int32_t *)HME_XD_FLAGS(b,i))) : \
! 279: (*((u_int32_t *)HME_XD_FLAGS(b,i)))
! 280: #define HME_XD_SETFLAGS(p, b, i, f) do { \
! 281: *((u_int32_t *)HME_XD_FLAGS(b,i)) = ((p) ? htole32(f) : (f)); \
! 282: } while(0)
! 283: #define HME_XD_SETADDR(p, b, i, a) do { \
! 284: *((u_int32_t *)HME_XD_ADDR(b,i)) = ((p) ? htole32(a) : (a)); \
! 285: } while(0)
! 286:
! 287: /* Descriptor flag values */
! 288: #define HME_XD_OWN 0x80000000 /* ownership: 1=hw, 0=sw */
! 289: #define HME_XD_SOP 0x40000000 /* start of packet marker (tx) */
! 290: #define HME_XD_OFL 0x40000000 /* buffer overflow (rx) */
! 291: #define HME_XD_EOP 0x20000000 /* end of packet marker (tx) */
! 292: #define HME_XD_TXCKSUM 0x10000000 /* checksum enable (tx) */
! 293: #define HME_XD_RXLENMSK 0x3fff0000 /* packet length mask (rx) */
! 294: #define HME_XD_RXLENSHIFT 16
! 295: #define HME_XD_TXLENMSK 0x00003fff /* packet length mask (tx) */
! 296: #define HME_XD_RXCKSUM 0x0000ffff /* packet checksum (rx) */
! 297:
! 298: /* Macros to encode/decode the receive buffer size from the flags field */
! 299: #define HME_XD_ENCODE_RSIZE(sz) \
! 300: (((sz) << HME_XD_RXLENSHIFT) & HME_XD_RXLENMSK)
! 301: #define HME_XD_DECODE_RSIZE(flags) \
! 302: (((flags) & HME_XD_RXLENMSK) >> HME_XD_RXLENSHIFT)
! 303:
! 304: /* Provide encode/decode macros for the transmit buffers for symmetry */
! 305: #define HME_XD_ENCODE_TSIZE(sz) \
! 306: (((sz) << 0) & HME_XD_TXLENMSK)
! 307: #define HME_XD_DECODE_TSIZE(flags) \
! 308: (((flags) & HME_XD_TXLENMSK) >> 0)
CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to hmereg.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / dev / ic