Annotation of sys/dev/ic/bt8xx.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: bt8xx.h,v 1.3 2005/06/23 14:57:48 robert Exp $ */
2: /* $NetBSD: bt8xx.h,v 1.4 2000/12/30 16:55:24 wiz Exp $ */
3:
4: /* This file is merged from ioctl_meteor.h and ioctl_bt848.h from FreeBSD. */
5: /* The copyright below only applies to the ioctl_meteor.h part of this file. */
6:
7: #ifndef _DEV_IC_BT8XX_H_
8: #define _DEV_IC_BT8XX_H_
9: /*
10: * Copyright (c) 1995 Mark Tinguely and Jim Lowe
11: * All rights reserved.
12: *
13: * Redistribution and use in source and binary forms, with or without
14: * modification, are permitted provided that the following conditions
15: * are met:
16: * 1. Redistributions of source code must retain the above copyright
17: * notice, this list of conditions and the following disclaimer.
18: * 2. Redistributions in binary form must reproduce the above copyright
19: * notice, this list of conditions and the following disclaimer in the
20: * documentation and/or other materials provided with the distribution.
21: * 3. All advertising materials mentioning features or use of this software
22: * must display the following acknowledgement:
23: * This product includes software developed by Mark Tinguely and Jim Lowe
24: * 4. The name of the author may not be used to endorse or promote products
25: * derived from this software without specific prior written permission.
26: *
27: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
28: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
29: * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
30: * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
31: * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
32: * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
33: * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35: * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
36: * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37: * POSSIBILITY OF SUCH DAMAGE.
38: *
39: * FreeBSD: src/sys/i386/include/ioctl_meteor.h,v 1.11 1999/12/29 04:33:02 peter Exp
40: */
41: /*
42: * ioctl constants for Matrox Meteor Capture card.
43: */
44:
45:
46: #ifndef _KERNEL
47: #include <sys/types.h>
48: #endif
49: #include <sys/ioccom.h>
50:
51: struct meteor_capframe {
52: short command; /* see below for valid METEORCAPFRM commands */
53: short lowat; /* start transfer if < this number */
54: short hiwat; /* stop transfer if > this number */
55: } ;
56:
57: /* structure for METEOR[GS]ETGEO - get/set geometry */
58: struct meteor_geomet {
59: u_short rows;
60: u_short columns;
61: u_short frames;
62: u_int oformat;
63: } ;
64:
65: /* structure for METEORGCOUNT-get count of frames, fifo errors and dma errors */
66: struct meteor_counts {
67: u_int fifo_errors; /* count of fifo errors since open */
68: u_int dma_errors; /* count of dma errors since open */
69: u_int frames_captured; /* count of frames captured since open */
70: u_int even_fields_captured; /* count of even fields captured */
71: u_int odd_fields_captured; /* count of odd fields captured */
72: } ;
73:
74: /* structure for getting and setting direct transfers to vram */
75: struct meteor_video {
76: u_int addr; /* Address of location to dma to */
77: u_int width; /* Width of memory area */
78: u_int banksize; /* Size of Vram bank */
79: u_int ramsize; /* Size of Vram */
80: };
81:
82: #define METEORCAPTUR _IOW('x', 1, int) /* capture a frame */
83: #define METEORCAPFRM _IOW('x', 2, struct meteor_capframe) /* sync capture */
84: #define METEORSETGEO _IOW('x', 3, struct meteor_geomet) /* set geometry */
85: #define METEORGETGEO _IOR('x', 4, struct meteor_geomet) /* get geometry */
86: #define METEORSTATUS _IOR('x', 5, unsigned short) /* get status */
87: #define METEORSHUE _IOW('x', 6, signed char) /* set hue */
88: #define METEORGHUE _IOR('x', 6, signed char) /* get hue */
89: #define METEORSFMT _IOW('x', 7, unsigned int) /* set format */
90: #define METEORGFMT _IOR('x', 7, unsigned int) /* get format */
91: #define METEORSINPUT _IOW('x', 8, unsigned int) /* set input dev */
92: #define METEORGINPUT _IOR('x', 8, unsigned int) /* get input dev */
93: #define METEORSCHCV _IOW('x', 9, unsigned char) /* set uv gain */
94: #define METEORGCHCV _IOR('x', 9, unsigned char) /* get uv gain */
95: #define METEORSCOUNT _IOW('x',10, struct meteor_counts)
96: #define METEORGCOUNT _IOR('x',10, struct meteor_counts)
97: #define METEORSFPS _IOW('x',11, unsigned short) /* set fps */
98: #define METEORGFPS _IOR('x',11, unsigned short) /* get fps */
99: #define METEORSSIGNAL _IOW('x', 12, unsigned int) /* set signal */
100: #define METEORGSIGNAL _IOR('x', 12, unsigned int) /* get signal */
101: #define METEORSVIDEO _IOW('x', 13, struct meteor_video) /* set video */
102: #define METEORGVIDEO _IOR('x', 13, struct meteor_video) /* get video */
103: #define METEORSBRIG _IOW('x', 14, unsigned char) /* set brightness */
104: #define METEORGBRIG _IOR('x', 14, unsigned char) /* get brightness */
105: #define METEORSCSAT _IOW('x', 15, unsigned char) /* set chroma sat */
106: #define METEORGCSAT _IOR('x', 15, unsigned char) /* get uv saturation */
107: #define METEORSCONT _IOW('x', 16, unsigned char) /* set contrast */
108: #define METEORGCONT _IOR('x', 16, unsigned char) /* get contrast */
109: #define METEORSBT254 _IOW('x', 17, unsigned short) /* set Bt254 reg */
110: #define METEORGBT254 _IOR('x', 17, unsigned short) /* get Bt254 reg */
111: #define METEORSHWS _IOW('x', 18, unsigned char) /* set hor start reg */
112: #define METEORGHWS _IOR('x', 18, unsigned char) /* get hor start reg */
113: #define METEORSVWS _IOW('x', 19, unsigned char) /* set vert start reg */
114: #define METEORGVWS _IOR('x', 19, unsigned char) /* get vert start reg */
115: #define METEORSTS _IOW('x', 20, unsigned char) /* set time stamp */
116: #define METEORGTS _IOR('x', 20, unsigned char) /* get time stamp */
117:
118: #define METEOR_STATUS_ID_MASK 0xf000 /* ID of 7196 */
119: #define METEOR_STATUS_DIR 0x0800 /* Direction of Expansion port YUV */
120: #define METEOR_STATUS_OEF 0x0200 /* Field detected: Even/Odd */
121: #define METEOR_STATUS_SVP 0x0100 /* State of VRAM Port:inactive/active */
122: #define METEOR_STATUS_STTC 0x0080 /* Time Constant: TV/VCR */
123: #define METEOR_STATUS_HCLK 0x0040 /* Horiz PLL: locked/unlocked */
124: #define METEOR_STATUS_FIDT 0x0020 /* Field detect: 50/60hz */
125: #define METEOR_STATUS_ALTD 0x0002 /* Line alt: no line alt/line alt */
126: #define METEOR_STATUS_CODE 0x0001 /* Colour info: no colour/colour */
127:
128: /* METEORCAPTUR capture options */
129: #define METEOR_CAP_SINGLE 0x0001 /* capture one frame */
130: #define METEOR_CAP_CONTINOUS 0x0002 /* continuously capture */
131: #define METEOR_CAP_STOP_CONT 0x0004 /* stop the continuous capture */
132:
133: /* METEORCAPFRM capture commands */
134: #define METEOR_CAP_N_FRAMES 0x0001 /* capture N frames */
135: #define METEOR_CAP_STOP_FRAMES 0x0002 /* stop capture N frames */
136: #define METEOR_HALT_N_FRAMES 0x0003 /* halt of capture N frames */
137: #define METEOR_CONT_N_FRAMES 0x0004 /* continue after above halt */
138:
139: /* valid video input formats: */
140: #define METEOR_FMT_NTSC 0x00100 /* NTSC -- initialized default */
141: #define METEOR_FMT_PAL 0x00200 /* PAL */
142: #define METEOR_FMT_SECAM 0x00400 /* SECAM */
143: #define METEOR_FMT_AUTOMODE 0x00800 /* auto-mode */
144: #define METEOR_INPUT_DEV0 0x01000 /* camera input 0 -- default */
145: #define METEOR_INPUT_DEV_RCA METEOR_INPUT_DEV0
146: #define METEOR_INPUT_DEV1 0x02000 /* camera input 1 */
147: #define METEOR_INPUT_DEV2 0x04000 /* camera input 2 */
148: #define METEOR_INPUT_DEV3 0x08000 /* camera input 3 */
149: #define METEOR_INPUT_DEV_RGB 0x0a000 /* for rgb version of meteor */
150: #define METEOR_INPUT_DEV_SVIDEO 0x06000 /* S-video input port */
151:
152: /* valid video output formats: */
153: #define METEOR_GEO_RGB16 0x0010000 /* packed -- initialized default */
154: #define METEOR_GEO_RGB24 0x0020000 /* RBG 24 bits packed */
155: /* internally stored in 32 bits */
156: #define METEOR_GEO_YUV_PACKED 0x0040000 /* 4-2-2 YUV 16 bits packed */
157: #define METEOR_GEO_YUV_PLANAR 0x0080000 /* 4-2-2 YUV 16 bits planer */
158: #define METEOR_GEO_YUV_PLANER METEOR_GEO_YUV_PLANAR
159: #define METEOR_GEO_UNSIGNED 0x0400000 /* unsigned uv outputs */
160: #define METEOR_GEO_EVEN_ONLY 0x1000000 /* set for even only field capture */
161: #define METEOR_GEO_ODD_ONLY 0x2000000 /* set for odd only field capture */
162: #define METEOR_GEO_FIELD_MASK 0x3000000
163: #define METEOR_GEO_YUV_422 0x4000000 /* 4-2-2 YUV in Y-U-V combined */
164: #define METEOR_GEO_OUTPUT_MASK 0x40f0000
165: #define METEOR_GEO_YUV_12 0x10000000 /* YUV 12 format */
166: #define METEOR_GEO_YUV_9 0x40000000 /* YUV 9 format */
167:
168: #define METEOR_FIELD_MODE 0x80000000 /* Field cap or Frame cap */
169:
170: #define METEOR_SIG_MODE_MASK 0xffff0000
171: #define METEOR_SIG_FRAME 0x00000000 /* signal every frame */
172: #define METEOR_SIG_FIELD 0x00010000 /* signal every field */
173:
174: /* following structure is used to coordinate the synchronous */
175:
176: struct meteor_mem {
177: /* kernel write only */
178: int frame_size; /* row*columns*depth */
179: unsigned num_bufs; /* number of frames in buffer (1-32) */
180: /* user and kernel change these */
181: int lowat; /* kernel starts capture if < this number */
182: int hiwat; /* kernel stops capture if > this number.
183: hiwat <= numbufs */
184: unsigned active; /* bit mask of active frame buffers
185: kernel sets, user clears */
186: int num_active_bufs; /* count of active frame buffer
187: kernel increments, user decrements */
188:
189: /* reference to mmapped data */
190: caddr_t buf; /* The real space (virtual addr) */
191: } ;
192:
193: /*
194: * extensions to ioctl_meteor.h for the bt848 cards
195: *
196: * FreeBSD: src/sys/i386/include/ioctl_bt848.h,v 1.27 2000/10/26 16:41:48 roger Exp
197: */
198:
199:
200: /*
201: * frequency sets
202: */
203: #define CHNLSET_NABCST 1
204: #define CHNLSET_CABLEIRC 2
205: #define CHNLSET_CABLEHRC 3
206: #define CHNLSET_WEUROPE 4
207: #define CHNLSET_JPNBCST 5
208: #define CHNLSET_JPNCABLE 6
209: #define CHNLSET_XUSSR 7
210: #define CHNLSET_AUSTRALIA 8
211: #define CHNLSET_FRANCE 9
212: #define CHNLSET_MIN CHNLSET_NABCST
213: #define CHNLSET_MAX CHNLSET_FRANCE
214:
215:
216: /*
217: * constants for various tuner registers
218: */
219: #define BT848_HUEMIN (-90)
220: #define BT848_HUEMAX 90
221: #define BT848_HUECENTER 0
222: #define BT848_HUERANGE 179.3
223: #define BT848_HUEREGMIN (-128)
224: #define BT848_HUEREGMAX 127
225: #define BT848_HUESTEPS 256
226:
227: #define BT848_BRIGHTMIN (-50)
228: #define BT848_BRIGHTMAX 50
229: #define BT848_BRIGHTCENTER 0
230: #define BT848_BRIGHTRANGE 99.6
231: #define BT848_BRIGHTREGMIN (-128)
232: #define BT848_BRIGHTREGMAX 127
233: #define BT848_BRIGHTSTEPS 256
234:
235: #define BT848_CONTRASTMIN 0
236: #define BT848_CONTRASTMAX 237
237: #define BT848_CONTRASTCENTER 100
238: #define BT848_CONTRASTRANGE 236.57
239: #define BT848_CONTRASTREGMIN 0
240: #define BT848_CONTRASTREGMAX 511
241: #define BT848_CONTRASTSTEPS 512
242:
243: #define BT848_CHROMAMIN 0
244: #define BT848_CHROMAMAX 284
245: #define BT848_CHROMACENTER 100
246: #define BT848_CHROMARANGE 283.89
247: #define BT848_CHROMAREGMIN 0
248: #define BT848_CHROMAREGMAX 511
249: #define BT848_CHROMASTEPS 512
250:
251: #define BT848_SATUMIN 0
252: #define BT848_SATUMAX 202
253: #define BT848_SATUCENTER 100
254: #define BT848_SATURANGE 201.18
255: #define BT848_SATUREGMIN 0
256: #define BT848_SATUREGMAX 511
257: #define BT848_SATUSTEPS 512
258:
259: #define BT848_SATVMIN 0
260: #define BT848_SATVMAX 284
261: #define BT848_SATVCENTER 100
262: #define BT848_SATVRANGE 283.89
263: #define BT848_SATVREGMIN 0
264: #define BT848_SATVREGMAX 511
265: #define BT848_SATVSTEPS 512
266:
267:
268: /*
269: * audio stuff
270: */
271: #define AUDIO_TUNER 0x00 /* command for the audio routine */
272: #define AUDIO_EXTERN 0x01 /* don't confuse them with bit */
273: #define AUDIO_INTERN 0x02 /* settings */
274: #define AUDIO_MUTE 0x80
275: #define AUDIO_UNMUTE 0x81
276:
277:
278: /*
279: * EEProm stuff
280: */
281: struct eeProm {
282: short offset;
283: short count;
284: u_char bytes[ 256 ];
285: };
286:
287:
288: /*
289: * XXX: this is a hack, should be in ioctl_meteor.h
290: * here to avoid touching that file for now...
291: */
292: #define TVTUNER_SETCHNL _IOW('x', 32, unsigned int) /* set channel */
293: #define TVTUNER_GETCHNL _IOR('x', 32, unsigned int) /* get channel */
294: #define TVTUNER_SETTYPE _IOW('x', 33, unsigned int) /* set tuner type */
295: #define TVTUNER_GETTYPE _IOR('x', 33, unsigned int) /* get tuner type */
296: #define TVTUNER_GETSTATUS _IOR('x', 34, unsigned int) /* get tuner status */
297: #define TVTUNER_SETFREQ _IOW('x', 35, unsigned int) /* set frequency */
298: #define TVTUNER_GETFREQ _IOR('x', 36, unsigned int) /* get frequency */
299:
300:
301: #define BT848_SHUE _IOW('x', 37, int) /* set hue */
302: #define BT848_GHUE _IOR('x', 37, int) /* get hue */
303: #define BT848_SBRIG _IOW('x', 38, int) /* set brightness */
304: #define BT848_GBRIG _IOR('x', 38, int) /* get brightness */
305: #define BT848_SCSAT _IOW('x', 39, int) /* set chroma sat */
306: #define BT848_GCSAT _IOR('x', 39, int) /* get UV saturation */
307: #define BT848_SCONT _IOW('x', 40, int) /* set contrast */
308: #define BT848_GCONT _IOR('x', 40, int) /* get contrast */
309: #define BT848_SVSAT _IOW('x', 41, int) /* set chroma V sat */
310: #define BT848_GVSAT _IOR('x', 41, int) /* get V saturation */
311: #define BT848_SUSAT _IOW('x', 42, int) /* set chroma U sat */
312: #define BT848_GUSAT _IOR('x', 42, int) /* get U saturation */
313:
314: #define BT848_SCBARS _IOR('x', 43, int) /* set colorbar */
315: #define BT848_CCBARS _IOR('x', 44, int) /* clear colorbar */
316:
317:
318: #define BT848_SAUDIO _IOW('x', 46, int) /* set audio channel */
319: #define BT848_GAUDIO _IOR('x', 47, int) /* get audio channel */
320: #define BT848_SBTSC _IOW('x', 48, int) /* set audio channel */
321:
322: #define BT848_GSTATUS _IOR('x', 49, unsigned int) /* reap status */
323:
324: #define BT848_WEEPROM _IOWR('x', 50, struct eeProm) /* write to EEProm */
325: #define BT848_REEPROM _IOWR('x', 51, struct eeProm) /* read from EEProm */
326:
327: #define BT848_SIGNATURE _IOWR('x', 52, struct eeProm) /* read card sig */
328:
329: #define TVTUNER_SETAFC _IOW('x', 53, int) /* turn AFC on/off */
330: #define TVTUNER_GETAFC _IOR('x', 54, int) /* query AFC on/off */
331: #define BT848_SLNOTCH _IOW('x', 55, int) /* set luma notch */
332: #define BT848_GLNOTCH _IOR('x', 56, int) /* get luma notch */
333:
334: /* Read/Write the BT848's I2C bus directly
335: * b7-b0: data (read/write)
336: * b15-b8: internal peripheral register (write)
337: * b23-b16: i2c addr (write)
338: * b31-b24: 1 = write, 0 = read
339: */
340: #define BT848_I2CWR _IOWR('x', 57, u_int) /* i2c read-write */
341:
342: struct bktr_msp_control {
343: unsigned char function;
344: unsigned int address;
345: unsigned int data;
346: };
347:
348: #define BT848_MSP_RESET _IO('x', 76) /* MSP chip reset */
349: #define BT848_MSP_READ _IOWR('x', 77, struct bktr_msp_control) /* MSP chip read */
350: #define BT848_MSP_WRITE _IOWR('x', 78, struct bktr_msp_control) /* MSP chip write */
351:
352: /* Support for radio tuner */
353: #define RADIO_SETMODE _IOW('x', 58, unsigned int) /* set radio modes */
354: #define RADIO_GETMODE _IOR('x', 58, unsigned char) /* get radio modes */
355: #define RADIO_AFC 0x01 /* These modes will probably not */
356: #define RADIO_MONO 0x02 /* work on the FRxxxx. It does */
357: #define RADIO_MUTE 0x08 /* work on the FMxxxx. */
358: #define RADIO_SETFREQ _IOW('x', 59, unsigned int) /* set frequency */
359: #define RADIO_GETFREQ _IOR('x', 59, unsigned int) /* set frequency */
360: /* Argument is frequency*100MHz */
361:
362: /*
363: * XXX: more bad magic,
364: * we need to fix the METEORGINPUT to return something public
365: * duplicate them here for now...
366: */
367: #define METEOR_DEV0 0x00001000
368: #define METEOR_DEV1 0x00002000
369: #define METEOR_DEV2 0x00004000
370: #define METEOR_DEV3 0x00008000
371: #define METEOR_DEV_SVIDEO 0x00006000
372: /*
373: * right now I don't know were to put these, but as they are suppose to be
374: * a part of a common video capture interface, these should be relocated to
375: * another place. Probably most of the METEOR_xxx defines need to be
376: * renamed and moved to a common header
377: */
378:
379: typedef enum { METEOR_PIXTYPE_RGB, METEOR_PIXTYPE_YUV,
380: METEOR_PIXTYPE_YUV_PACKED,
381: METEOR_PIXTYPE_YUV_12 } METEOR_PIXTYPE;
382:
383:
384: struct meteor_pixfmt {
385: u_int index; /* Index in supported pixfmt list */
386: METEOR_PIXTYPE type; /* What's the board gonna feed us */
387: u_int Bpp; /* Bytes per pixel */
388: u_int masks[3]; /* R,G,B or Y,U,V masks, respectively */
389: unsigned swap_bytes :1; /* Bytes swapped within shorts */
390: unsigned swap_shorts:1; /* Shorts swapped within longs */
391: };
392:
393:
394: struct bktr_clip {
395: int x_min;
396: int x_max;
397: int y_min;
398: int y_max;
399: };
400:
401: #define BT848_MAX_CLIP_NODE 100
402: struct _bktr_clip {
403: struct bktr_clip x[BT848_MAX_CLIP_NODE];
404: };
405:
406: /*
407: * I'm using METEOR_xxx just because that will be common to other interface
408: * and less of a surprise
409: */
410: #define METEORSACTPIXFMT _IOW('x', 64, int )
411: #define METEORGACTPIXFMT _IOR('x', 64, int )
412: #define METEORGSUPPIXFMT _IOWR('x', 65, struct meteor_pixfmt)
413:
414: /* set clip list */
415: #define BT848SCLIP _IOW('x', 66, struct _bktr_clip )
416: #define BT848GCLIP _IOR('x', 66, struct _bktr_clip )
417:
418:
419: /* set input format */
420: #define BT848SFMT _IOW('x', 67, unsigned int )
421: #define BT848GFMT _IOR('x', 67, unsigned int )
422:
423: /* set clear-buffer-on-start */
424: #define BT848SCBUF _IOW('x', 68, int)
425: #define BT848GCBUF _IOR('x', 68, int)
426:
427: /* set capture area */
428: /* The capture area is the area of the video image which is grabbed */
429: /* Usually the capture area is 640x480 (768x576 PAL) pixels */
430: /* This area is then scaled to the dimensions the user requires */
431: /* using the METEORGEO ioctl */
432: /* However, the capture area could be 400x300 pixels from the top right */
433: /* corner of the video image */
434: struct bktr_capture_area {
435: int x_offset;
436: int y_offset;
437: int x_size;
438: int y_size;
439: };
440: #define BT848_SCAPAREA _IOW('x', 69, struct bktr_capture_area)
441: #define BT848_GCAPAREA _IOR('x', 69, struct bktr_capture_area)
442:
443:
444: /* Get channel Set */
445: #define BT848_MAX_CHNLSET_NAME_LEN 16
446: struct bktr_chnlset {
447: short index;
448: short max_channel;
449: char name[BT848_MAX_CHNLSET_NAME_LEN];
450: };
451: #define TVTUNER_GETCHNLSET _IOWR('x', 70, struct bktr_chnlset)
452:
453:
454:
455: /* Infra Red Remote Control */
456: struct bktr_remote {
457: unsigned char data[3];
458: };
459: #define REMOTE_GETKEY _IOR('x', 71, struct bktr_remote)/*read the remote */
460: /*control receiver*/
461: /*returns raw data*/
462:
463:
464: /*
465: * Direct access to GPIO pins. You must add BKTR_GPIO_ACCESS to your kernel
466: * configuration file to use these
467: */
468: #define BT848_GPIO_SET_EN _IOW('x', 72, int) /* set gpio_out_en */
469: #define BT848_GPIO_GET_EN _IOR('x', 73, int) /* get gpio_out_en */
470: #define BT848_GPIO_SET_DATA _IOW('x', 74, int) /* set gpio_data */
471: #define BT848_GPIO_GET_DATA _IOR('x', 75, int) /* get gpio_data */
472:
473:
474:
475: /* XXX - Copied from /sys/pci/brktree_reg.h */
476: #define BT848_IFORM_FORMAT (0x7<<0)
477: # define BT848_IFORM_F_RSVD (0x7)
478: # define BT848_IFORM_F_SECAM (0x6)
479: # define BT848_IFORM_F_PALN (0x5)
480: # define BT848_IFORM_F_PALM (0x4)
481: # define BT848_IFORM_F_PALBDGHI (0x3)
482: # define BT848_IFORM_F_NTSCJ (0x2)
483: # define BT848_IFORM_F_NTSCM (0x1)
484: # define BT848_IFORM_F_AUTO (0x0)
485:
486:
487:
488: /* XXX Silly constants not always defined by the environment. */
489: #ifndef TRUE
490: #define TRUE 1
491: #endif
492: #ifndef FALSE
493: #define FALSE 0
494: #endif
495:
496:
497: #endif /* _DEV_IC_BT8XX_H_ */
CVSweb