Annotation of sys/dev/ic/anreg.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: anreg.h,v 1.10 2006/01/09 21:19:47 jsg Exp $ */
! 2: /* $NetBSD: anreg.h,v 1.11 2005/01/15 11:01:46 dyoung Exp $ */
! 3: /*
! 4: * Copyright (c) 1997, 1998, 1999
! 5: * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
! 6: *
! 7: * Redistribution and use in source and binary forms, with or without
! 8: * modification, are permitted provided that the following conditions
! 9: * are met:
! 10: * 1. Redistributions of source code must retain the above copyright
! 11: * notice, this list of conditions and the following disclaimer.
! 12: * 2. Redistributions in binary form must reproduce the above copyright
! 13: * notice, this list of conditions and the following disclaimer in the
! 14: * documentation and/or other materials provided with the distribution.
! 15: * 3. All advertising materials mentioning features or use of this software
! 16: * must display the following acknowledgement:
! 17: * This product includes software developed by Bill Paul.
! 18: * 4. Neither the name of the author nor the names of any co-contributors
! 19: * may be used to endorse or promote products derived from this software
! 20: * without specific prior written permission.
! 21: *
! 22: * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
! 23: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 24: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 25: * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
! 26: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
! 27: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
! 28: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
! 29: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
! 30: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
! 31: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
! 32: * THE POSSIBILITY OF SUCH DAMAGE.
! 33: *
! 34: * $FreeBSD: src/sys/dev/an/if_anreg.h,v 1.3 2000/11/13 23:04:12 wpaul Exp $
! 35: */
! 36:
! 37: #ifndef _DEV_IC_ANREG_H
! 38: #define _DEV_IC_ANREG_H
! 39:
! 40: /*
! 41: * Size of Aironet I/O space.
! 42: */
! 43: #define AN_IOSIZ 0x40
! 44:
! 45: /*
! 46: * Hermes register definitions and what little I know about them.
! 47: */
! 48:
! 49: /* Hermes command/status registers. */
! 50: #define AN_COMMAND 0x00
! 51: #define AN_PARAM0 0x02
! 52: #define AN_PARAM1 0x04
! 53: #define AN_PARAM2 0x06
! 54: #define AN_STATUS 0x08
! 55: #define AN_RESP0 0x0A
! 56: #define AN_RESP1 0x0C
! 57: #define AN_RESP2 0x0E
! 58: #define AN_LINKSTAT 0x10
! 59:
! 60: /* Command register */
! 61: #define AN_CMD_BUSY 0x8000 /* busy bit */
! 62: #define AN_CMD_NO_ACK 0x0080 /* don't acknowledge command */
! 63: #define AN_CMD_CODE_MASK 0x003F
! 64: #define AN_CMD_QUAL_MASK 0x7F00
! 65:
! 66: /* Command codes */
! 67: #define AN_CMD_NOOP 0x0000 /* no-op */
! 68: #define AN_CMD_ENABLE 0x0001 /* enable */
! 69: #define AN_CMD_DISABLE 0x0002 /* disable */
! 70: #define AN_CMD_FORCE_SYNCLOSS 0x0003 /* force loss of sync */
! 71: #define AN_CMD_FW_RESTART 0x0004 /* firmware resrart */
! 72: #define AN_CMD_HOST_SLEEP 0x0005
! 73: #define AN_CMD_MAGIC_PKT 0x0006
! 74: #define AN_CMD_READCFG 0x0008
! 75: #define AN_CMD_SET_MODE 0x0009
! 76: #define AN_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */
! 77: #define AN_CMD_TX 0x000B /* transmit */
! 78: #define AN_CMD_DEALLOC_MEM 0x000C
! 79: #define AN_CMD_NOOP2 0x0010
! 80: #define AN_CMD_ACCESS 0x0021
! 81: #define AN_CMD_ALLOC_BUF 0x0028
! 82: #define AN_CMD_PSP_NODES 0x0030
! 83: #define AN_CMD_SET_PHYREG 0x003E
! 84: #define AN_CMD_TX_TEST 0x003F
! 85: #define AN_CMD_SLEEP 0x0085
! 86: #define AN_CMD_SAVECFG 0x0108
! 87:
! 88: /*
! 89: * Reclaim qualifier bit, applicable to the
! 90: * TX command.
! 91: */
! 92: #define AN_RECLAIM 0x0100 /* reclaim NIC memory */
! 93:
! 94: /*
! 95: * ACCESS command qualifier bits.
! 96: */
! 97: #define AN_ACCESS_READ 0x0000
! 98: #define AN_ACCESS_WRITE 0x0100
! 99:
! 100: /*
! 101: * PROGRAM command qualifier bits.
! 102: */
! 103: #define AN_PROGRAM_DISABLE 0x0000
! 104: #define AN_PROGRAM_ENABLE_RAM 0x0100
! 105: #define AN_PROGRAM_ENABLE_NVRAM 0x0200
! 106: #define AN_PROGRAM_NVRAM 0x0300
! 107:
! 108: /* Status register values */
! 109: #define AN_STAT_CMD_CODE 0x003F
! 110: #define AN_STAT_CMD_RESULT 0x7F00
! 111:
! 112: /* Linkstat register */
! 113: #define AN_LINKSTAT_ASSOCIATED 0x0400
! 114: #define AN_LINKSTAT_AUTHFAIL 0x0300
! 115: #define AN_LINKSTAT_ASSOC_FAIL 0x8400
! 116: #define AN_LINKSTAT_DISASSOC 0x8200
! 117: #define AN_LINKSTAT_DEAUTH 0x8100
! 118: #define AN_LINKSTAT_SYNCLOST_TSF 0x8004
! 119: #define AN_LINKSTAT_SYNCLOST_HOSTREQ 0x8003
! 120: #define AN_LINKSTAT_SYNCLOST_AVGRETRY 0x8002
! 121: #define AN_LINKSTAT_SYNCLOST_MAXRETRY 0x8001
! 122: #define AN_LINKSTAT_SYNCLOST_MISSBEACON 0x8000
! 123:
! 124: /* memory handle management registers */
! 125: #define AN_RX_FID 0x20
! 126: #define AN_ALLOC_FID 0x22
! 127: #define AN_TX_CMP_FID 0x24
! 128:
! 129: /*
! 130: * Buffer Access Path (BAP) registers.
! 131: * These are I/O channels. I believe you can use each one for
! 132: * any desired purpose independently of the other. In general
! 133: * though, we use BAP1 for reading and writing LTV records and
! 134: * reading received data frames, and BAP0 for writing transmit
! 135: * frames. This is a convention though, not a rule.
! 136: */
! 137: #define AN_SEL0 0x18
! 138: #define AN_SEL1 0x1A
! 139: #define AN_OFF0 0x1C
! 140: #define AN_OFF1 0x1E
! 141: #define AN_DATA0 0x36
! 142: #define AN_DATA1 0x38
! 143: #define AN_BAP0 AN_DATA0
! 144: #define AN_BAP1 AN_DATA1
! 145:
! 146: #define AN_OFF_BUSY 0x8000
! 147: #define AN_OFF_ERR 0x4000
! 148: #define AN_OFF_DONE 0x2000
! 149: #define AN_OFF_DATAOFF 0x0FFF
! 150:
! 151: /* Event registers */
! 152: #define AN_EVENT_STAT 0x30 /* Event status */
! 153: #define AN_INT_EN 0x32 /* Interrupt enable/disable */
! 154: #define AN_EVENT_ACK 0x34 /* Ack event */
! 155:
! 156: /* Events */
! 157: #define AN_EV_CLR_STUCK_BUSY 0x4000 /* clear stuck busy bit */
! 158: #define AN_EV_WAKEREQUEST 0x2000 /* awaken from PSP mode */
! 159: #define AN_EV_MIC 0x1000 /* Message Integrity Check*/
! 160: #define AN_EV_TX_CPY 0x0400
! 161: #define AN_EV_AWAKE 0x0100 /* station woke up from PSP mode*/
! 162: #define AN_EV_LINKSTAT 0x0080 /* link status available */
! 163: #define AN_EV_CMD 0x0010 /* command completed */
! 164: #define AN_EV_ALLOC 0x0008 /* async alloc/reclaim completed */
! 165: #define AN_EV_TX_EXC 0x0004 /* async xmit completed with failure */
! 166: #define AN_EV_TX 0x0002 /* async xmit completed successfully */
! 167: #define AN_EV_RX 0x0001 /* async rx completed */
! 168:
! 169: /* Host software registers */
! 170: #define AN_SW0 0x28
! 171: #define AN_SW1 0x2A
! 172: #define AN_SW2 0x2C
! 173: #define AN_SW3 0x2E
! 174:
! 175: #define AN_CNTL 0x14
! 176:
! 177: #define AN_CNTL_AUX_ENA 0xC000
! 178: #define AN_CNTL_AUX_ENA_STAT 0xC000
! 179: #define AN_CNTL_AUX_DIS_STAT 0x0000
! 180: #define AN_CNTL_AUX_ENA_CNTL 0x8000
! 181: #define AN_CNTL_AUX_DIS_CNTL 0x4000
! 182:
! 183: #define AN_AUX_PAGE 0x3A
! 184: #define AN_AUX_OFFSET 0x3C
! 185: #define AN_AUX_DATA 0x3E
! 186:
! 187: /*
! 188: * General configuration information.
! 189: */
! 190: #define AN_RID_GENCONFIG 0xFF10
! 191: struct an_rid_genconfig {
! 192: /* General configuration. */
! 193: u_int16_t an_opmode; /* 0x02 */
! 194: u_int16_t an_rxmode; /* 0x04 */
! 195: u_int16_t an_fragthresh; /* 0x06 */
! 196: u_int16_t an_rtsthresh; /* 0x08 */
! 197: u_int8_t an_macaddr[6]; /* 0x0A */
! 198: u_int8_t an_rates[8]; /* 0x10 */
! 199: u_int16_t an_shortretry_limit; /* 0x18 */
! 200: u_int16_t an_longretry_limit; /* 0x1A */
! 201: u_int16_t an_tx_msdu_lifetime; /* 0x1C */
! 202: u_int16_t an_rx_msdu_lifetime; /* 0x1E */
! 203: u_int16_t an_stationary; /* 0x20 */
! 204: u_int16_t an_ordering; /* 0x22 */
! 205: u_int16_t an_devtype; /* 0x24 */
! 206: u_int16_t an_rsvd0[5]; /* 0x26 */
! 207: /* Scanning associating. */
! 208: u_int16_t an_scanmode; /* 0x30 */
! 209: u_int16_t an_probedelay; /* 0x32 */
! 210: u_int16_t an_probe_energy_timeout;/* 0x34 */
! 211: u_int16_t an_probe_response_timeout;/*0x36 */
! 212: u_int16_t an_beacon_listen_timeout;/*0x38 */
! 213: u_int16_t an_ibss_join_net_timeout;/*0x3A */
! 214: u_int16_t an_auth_timeout; /* 0x3C */
! 215: u_int16_t an_authtype; /* 0x3E */
! 216: u_int16_t an_assoc_timeout; /* 0x40 */
! 217: u_int16_t an_specified_ap_timeout;/* 0x42 */
! 218: u_int16_t an_offline_scan_interval;/*0x44 */
! 219: u_int16_t an_offline_scan_duration;/*0x46 */
! 220: u_int16_t an_link_loss_delay; /* 0x48 */
! 221: u_int16_t an_max_beacon_lost_time;/* 0x4A */
! 222: u_int16_t an_refresh_interval; /* 0x4C */
! 223: u_int16_t an_rsvd1; /* 0x4E */
! 224: /* Power save operation */
! 225: u_int16_t an_psave_mode; /* 0x50 */
! 226: u_int16_t an_sleep_for_dtims; /* 0x52 */
! 227: u_int16_t an_listen_interval; /* 0x54 */
! 228: u_int16_t an_fast_listen_interval;/* 0x56 */
! 229: u_int16_t an_listen_decay; /* 0x58 */
! 230: u_int16_t an_fast_listen_decay; /* 0x5A */
! 231: u_int16_t an_rsvd2[2]; /* 0x5C */
! 232: /* Ad-hoc (or AP) operation. */
! 233: u_int16_t an_beacon_period; /* 0x60 */
! 234: u_int16_t an_atim_duration; /* 0x62 */
! 235: u_int16_t an_rsvd3; /* 0x64 */
! 236: u_int16_t an_ds_channel; /* 0x66 */
! 237: u_int16_t an_rsvd4; /* 0x68 */
! 238: u_int16_t an_dtim_period; /* 0x6A */
! 239: u_int16_t an_rsvd5[2]; /* 0x6C */
! 240: /* Radio operation. */
! 241: u_int16_t an_radiotype; /* 0x70 */
! 242: u_int16_t an_diversity; /* 0x72 */
! 243: u_int16_t an_tx_power; /* 0x74 */
! 244: u_int16_t an_rss_thresh; /* 0x76 */
! 245: u_int16_t an_modulation_type; /* 0x78 */
! 246: u_int16_t an_short_preamble; /* 0x7A */
! 247: u_int16_t an_home_product; /* 0x7C */
! 248: u_int16_t an_rsvd6; /* 0x7E */
! 249: /* Aironet extensions. */
! 250: u_int8_t an_nodename[16]; /* 0x80 */
! 251: u_int16_t an_arl_thresh; /* 0x90 */
! 252: u_int16_t an_arl_decay; /* 0x92 */
! 253: u_int16_t an_arl_delay; /* 0x94 */
! 254: u_int8_t an_rsvd7; /* 0x96 */
! 255: u_int8_t an_rsvd8; /* 0x97 */
! 256: u_int8_t an_magic_packet_action; /* 0x98 */
! 257: u_int8_t an_magic_packet_ctl; /* 0x99 */
! 258: u_int16_t an_rsvd9;
! 259: u_int16_t an_spare[24];
! 260: } __attribute__((__packed__));
! 261:
! 262: #define AN_OPMODE_IBSS_ADHOC 0x0000
! 263: #define AN_OPMODE_INFRASTRUCTURE_STATION 0x0001
! 264: #define AN_OPMODE_AP 0x0002
! 265: #define AN_OPMODE_AP_REPEATER 0x0003
! 266: #define AN_OPMODE_UNMODIFIED_PAYLOAD 0x0100
! 267: #define AN_OPMODE_AIRONET_EXTENSIONS 0x0200
! 268: #define AN_OPMODE_AP_EXTENSIONS 0x0400
! 269: #define AN_OPMODE_ANTENNA_ALIGN 0x0800
! 270: #define AN_OPMODE_ETHER_LLC 0x1000
! 271: #define AN_OPMODE_LEAF_NODE 0x2000
! 272: #define AN_OPMODE_CF_POLLABLE 0x4000
! 273: #define AN_OPMODE_MIC 0x8000
! 274:
! 275: #define AN_RXMODE_BC_MC_ADDR 0x0000
! 276: #define AN_RXMODE_BC_ADDR 0x0001
! 277: #define AN_RXMODE_ADDR 0x0002
! 278: #define AN_RXMODE_80211_MONITOR_CURBSS 0x0003
! 279: #define AN_RXMODE_80211_MONITOR_ANYBSS 0x0004
! 280: #define AN_RXMODE_LAN_MONITOR_CURBSS 0x0005
! 281: #define AN_RXMODE_NO_8023_HEADER 0x0100
! 282: #define AN_RXMODE_NORMALIZED_RSSI 0x0200
! 283:
! 284: #define AN_RATE_1MBPS 0x0002
! 285: #define AN_RATE_2MBPS 0x0004
! 286: #define AN_RATE_5_5MBPS 0x000B
! 287: #define AN_RATE_11MBPS 0x0016
! 288:
! 289: #define AN_DEVTYPE_PC4500 0x0065
! 290: #define AN_DEVTYPE_PC4800 0x006D
! 291:
! 292: #define AN_SCANMODE_ACTIVE 0x0000
! 293: #define AN_SCANMODE_PASSIVE 0x0001
! 294: #define AN_SCANMODE_AIRONET_ACTIVE 0x0002
! 295:
! 296: #define AN_AUTHTYPE_NONE 0x0000
! 297: #define AN_AUTHTYPE_OPEN 0x0001
! 298: #define AN_AUTHTYPE_SHAREDKEY 0x0002
! 299: #define AN_AUTHTYPE_MASK 0x00ff
! 300: #define AN_AUTHTYPE_PRIVACY_IN_USE 0x0100
! 301: #define AN_AUTHTYPE_ALLOW_UNENCRYPTED 0x0200
! 302: #define AN_AUTHTYPE_LEAP 0x1000
! 303:
! 304: #define AN_PSAVE_CAM 0x0000
! 305: #define AN_PSAVE_PSP 0x0001
! 306: #define AN_PSAVE_PSP_CAM 0x0002
! 307:
! 308: #define AN_RADIOTYPE_80211_FH 0x0001
! 309: #define AN_RADIOTYPE_80211_DS 0x0002
! 310: #define AN_RADIOTYPE_LM2000_DS 0x0004
! 311:
! 312: #define AN_DIVERSITY_FACTORY_DEFAULT 0x0000
! 313: #define AN_DIVERSITY_ANTENNA_1_ONLY 0x0001
! 314: #define AN_DIVERSITY_ANTENNA_2_ONLY 0x0002
! 315: #define AN_DIVERSITY_ANTENNA_1_AND_2 0x0003
! 316:
! 317: #define AN_TXPOWER_FACTORY_DEFAULT 0x0000
! 318: #define AN_TXPOWER_50MW 50
! 319: #define AN_TXPOWER_100MW 100
! 320: #define AN_TXPOWER_250MW 250
! 321:
! 322: /*
! 323: * Valid SSID list. You can specify up to three SSIDs denoting
! 324: * the service sets that you want to join. The first SSID always
! 325: * defaults to "tsunami" which is a handy way to detect the
! 326: * card.
! 327: */
! 328: #define AN_RID_SSIDLIST 0xFF11
! 329: struct an_rid_ssidlist {
! 330: struct an_rid_ssid_entry {
! 331: u_int16_t an_ssid_len;
! 332: char an_ssid[32];
! 333: } __attribute__((__packed__)) an_entry[3]; /* 25 for fwver.5 */
! 334: } __attribute__((__packed__));
! 335:
! 336: /*
! 337: * Valid AP list.
! 338: */
! 339: #define AN_RID_APLIST 0xFF12
! 340: struct an_rid_aplist {
! 341: u_int8_t an_ap1[8];
! 342: u_int8_t an_ap2[8];
! 343: u_int8_t an_ap3[8];
! 344: u_int8_t an_ap4[8];
! 345: } __attribute__((__packed__));
! 346:
! 347: /*
! 348: * Driver name.
! 349: */
! 350: #define AN_RID_DRVNAME 0xFF13
! 351: struct an_rid_drvname {
! 352: u_int8_t an_drvname[16];
! 353: } __attribute__((__packed__));
! 354:
! 355: /*
! 356: * Frame encapsulation.
! 357: */
! 358: #define AN_RID_ENCAP 0xFF14
! 359: #define AN_ENCAP_NENTS 8
! 360: struct an_rid_encap {
! 361: struct an_rid_encap_entry {
! 362: u_int16_t an_ethertype;
! 363: u_int16_t an_action;
! 364: } __attribute__((__packed__)) an_entry[AN_ENCAP_NENTS];
! 365: } __attribute__((__packed__));
! 366:
! 367: #define AN_ENCAP_ACTION_RX 0x0001
! 368: #define AN_ENCAP_ACTION_TX 0x0002
! 369:
! 370: #define AN_RXENCAP_NONE 0x0000
! 371: #define AN_RXENCAP_RFC1024 0x0001
! 372:
! 373: #define AN_TXENCAP_RFC1024 0x0000
! 374: #define AN_TXENCAP_80211 0x0002
! 375:
! 376: /*
! 377: * Actual config, same structure as general config (read only).
! 378: */
! 379: #define AN_RID_ACTUALCFG 0xFF20
! 380:
! 381: /*
! 382: * Card capabilities (read only).
! 383: */
! 384: #define AN_RID_CAPABILITIES 0xFF00
! 385: struct an_rid_caps {
! 386: u_int8_t an_oui[3]; /* 0x02 */
! 387: u_int8_t an_rsvd0; /* 0x05 */
! 388: u_int16_t an_prodnum; /* 0x06 */
! 389: u_int8_t an_manufname[32]; /* 0x08 */
! 390: u_int8_t an_prodname[16]; /* 0x28 */
! 391: u_int8_t an_prodvers[8]; /* 0x38 */
! 392: u_int8_t an_oemaddr[6]; /* 0x40 */
! 393: u_int8_t an_aironetaddr[6]; /* 0x46 */
! 394: u_int16_t an_radiotype; /* 0x4C */
! 395: u_int16_t an_regdomain; /* 0x4E */
! 396: u_int8_t an_callid[6]; /* 0x50 */
! 397: u_int8_t an_rates[8]; /* 0x56 */
! 398: u_int8_t an_rx_diversity; /* 0x5E */
! 399: u_int8_t an_tx_diversity; /* 0x5F */
! 400: u_int16_t an_tx_powerlevels[8]; /* 0x60 */
! 401: u_int16_t an_hwrev; /* 0x70 */
! 402: u_int16_t an_hwcaps; /* 0x72 */
! 403: u_int16_t an_temprange; /* 0x74 */
! 404: u_int16_t an_fwrev; /* 0x76 */
! 405: u_int16_t an_fwsubrev; /* 0x78 */
! 406: u_int16_t an_ifacerev; /* 0x7A */
! 407: u_int16_t an_softcaps; /* 0x7C */
! 408: u_int16_t an_bootblockrev; /* 0x7E */
! 409: u_int16_t an_req_hw_support; /* 0x80 */
! 410: /* extended capabilities */
! 411: u_int16_t an_ext_softcaps; /* 0x82 */
! 412: u_int16_t an_spare[34];
! 413: } __attribute__((__packed__));
! 414:
! 415: #define AN_REGDOMAIN_USA 0
! 416: #define AN_REGDOMAIN_EUROPE 1
! 417: #define AN_REGDOMAIN_JAPAN 2
! 418: #define AN_REGDOMAIN_SPAIN 3
! 419: #define AN_REGDOMAIN_FRANCE 4
! 420: #define AN_REGDOMAIN_BELGIUM 5
! 421: #define AN_REGDOMAIN_ISRAEL 6
! 422: #define AN_REGDOMAIN_CANADA 7
! 423: #define AN_REGDOMAIN_AUSTRALIA 8
! 424: #define AN_REGDOMAIN_JAPANWIDE 9
! 425:
! 426: #define AN_SOFTCAPS_WEP 0x0002
! 427: #define AN_SOFTCAPS_RSSIMAP 0x0008
! 428: #define AN_SOFTCAPS_WEP128 0x0100
! 429:
! 430: #define AN_EXT_SOFTCAPS_MIC 0x0001
! 431:
! 432: /*
! 433: * Access point (read only)
! 434: */
! 435: #define AN_RID_APINFO 0xFF01
! 436: struct an_rid_apinfo {
! 437: u_int16_t an_tim_addr;
! 438: u_int16_t an_airo_addr;
! 439: } __attribute__((__packed__));
! 440:
! 441: /*
! 442: * Radio info (read only).
! 443: */
! 444: #define AN_RID_RADIOINFO 0xFF02
! 445:
! 446: /*
! 447: * Status (read only). Note: the manual claims this RID is 108 bytes
! 448: * long (0x6A is the last datum, which is 2 bytes long) however when
! 449: * this RID is read from the NIC, it returns a length of 110 or 112.
! 450: * To be on the safe side, this structure is padded with 4 extra 16-bit
! 451: * words. (There is a misprint in the manual which says the macaddr
! 452: * field is 8 bytes long.)
! 453: *
! 454: * Also, the channel_set and current_channel fields appear to be
! 455: * reversed. Either that, or the hop_period field is unused.
! 456: */
! 457: #define AN_RID_STATUS 0xFF50
! 458: struct an_rid_status {
! 459: u_int8_t an_macaddr[6]; /* 0x02 */
! 460: u_int16_t an_opmode; /* 0x08 */
! 461: u_int16_t an_errcode; /* 0x0A */
! 462: u_int16_t an_cur_signal_strength; /* 0x0C */
! 463: u_int16_t an_ssidlen; /* 0x0E */
! 464: u_int8_t an_ssid[32]; /* 0x10 */
! 465: u_int8_t an_ap_name[16]; /* 0x30 */
! 466: u_int8_t an_cur_bssid[6]; /* 0x40 */
! 467: u_int8_t an_prev_bssid1[6]; /* 0x46 */
! 468: u_int8_t an_prev_bssid2[6]; /* 0x4C */
! 469: u_int8_t an_prev_bssid3[6]; /* 0x52 */
! 470: u_int16_t an_beacon_period; /* 0x58 */
! 471: u_int16_t an_dtim_period; /* 0x5A */
! 472: u_int16_t an_atim_duration; /* 0x5C */
! 473: u_int16_t an_hop_period; /* 0x5E */
! 474: u_int16_t an_cur_channel; /* 0x62 */
! 475: u_int16_t an_channel_set; /* 0x60 */
! 476: u_int16_t an_hops_to_backbone; /* 0x64 */
! 477: u_int16_t an_ap_total_load; /* 0x66 */
! 478: u_int16_t an_our_generated_load; /* 0x68 */
! 479: u_int16_t an_accumulated_arl; /* 0x6A */
! 480: u_int16_t an_cur_signal_quality; /* 0x6C */
! 481: u_int16_t an_current_tx_rate; /* 0x6E */
! 482: u_int16_t an_ap_device; /* 0x70 */
! 483: u_int16_t an_normalized_rssi; /* 0x72 */
! 484: u_int16_t an_short_pre_in_use; /* 0x74 */
! 485: u_int8_t an_ap_ip_addr[4]; /* 0x76 */
! 486: u_int16_t an_max_noise_prev_sec; /* 0x7A */
! 487: u_int16_t an_avg_noise_prev_min; /* 0x7C */
! 488: u_int16_t an_max_noise_prev_min; /* 0x7E */
! 489: u_int16_t an_spare[11];
! 490: } __attribute__((__packed__));
! 491:
! 492: #define AN_STATUS_OPMODE_CONFIGURED 0x0001
! 493: #define AN_STATUS_OPMODE_MAC_ENABLED 0x0002
! 494: #define AN_STATUS_OPMODE_RX_ENABLED 0x0004
! 495: #define AN_STATUS_OPMODE_IN_SYNC 0x0010
! 496: #define AN_STATUS_OPMODE_ASSOCIATED 0x0020
! 497: #define AN_STATUS_OPMODE_ERROR 0x8000
! 498:
! 499: /*
! 500: * Statistics
! 501: */
! 502: #define AN_RID_16BITS_CUM 0xFF60 /* Cumulative 16-bit stats counters */
! 503: #define AN_RID_16BITS_DELTA 0xFF61 /* 16-bit stats (since last clear) */
! 504: #define AN_RID_16BITS_DELTACLR 0xFF62 /* 16-bit stats, clear on read */
! 505: #define AN_RID_32BITS_CUM 0xFF68 /* Cumulative 32-bit stats counters */
! 506: #define AN_RID_32BITS_DELTA 0xFF69 /* 32-bit stats (since last clear) */
! 507: #define AN_RID_32BITS_DELTACLR 0xFF6A /* 32-bit stats, clear on read */
! 508:
! 509: /*
! 510: * Grrr. The manual says the statistics record is 384 bytes in length,
! 511: * but the card says the record is 404 bytes. There's some padding left
! 512: * at the end of this structure to account for any discrepancies.
! 513: */
! 514: struct an_rid_stats {
! 515: u_int16_t an_spacer; /* 0x02 */
! 516: u_int32_t an_rx_overruns; /* 0x04 */
! 517: u_int32_t an_rx_plcp_csum_errs; /* 0x08 */
! 518: u_int32_t an_rx_plcp_format_errs; /* 0x0C */
! 519: u_int32_t an_rx_plcp_len_errs; /* 0x10 */
! 520: u_int32_t an_rx_mac_crc_errs; /* 0x14 */
! 521: u_int32_t an_rx_mac_crc_ok; /* 0x18 */
! 522: u_int32_t an_rx_wep_errs; /* 0x1C */
! 523: u_int32_t an_rx_wep_ok; /* 0x20 */
! 524: u_int32_t an_retry_long; /* 0x24 */
! 525: u_int32_t an_retry_short; /* 0x28 */
! 526: u_int32_t an_retry_max; /* 0x2C */
! 527: u_int32_t an_no_ack; /* 0x30 */
! 528: u_int32_t an_no_cts; /* 0x34 */
! 529: u_int32_t an_rx_ack_ok; /* 0x38 */
! 530: u_int32_t an_rx_cts_ok; /* 0x3C */
! 531: u_int32_t an_tx_ack_ok; /* 0x40 */
! 532: u_int32_t an_tx_rts_ok; /* 0x44 */
! 533: u_int32_t an_tx_cts_ok; /* 0x48 */
! 534: u_int32_t an_tx_lmac_mcasts; /* 0x4C */
! 535: u_int32_t an_tx_lmac_bcasts; /* 0x50 */
! 536: u_int32_t an_tx_lmac_ucast_frags; /* 0x54 */
! 537: u_int32_t an_tx_lmac_ucasts; /* 0x58 */
! 538: u_int32_t an_tx_beacons; /* 0x5C */
! 539: u_int32_t an_rx_beacons; /* 0x60 */
! 540: u_int32_t an_tx_single_cols; /* 0x64 */
! 541: u_int32_t an_tx_multi_cols; /* 0x68 */
! 542: u_int32_t an_tx_defers_no; /* 0x6C */
! 543: u_int32_t an_tx_defers_prot; /* 0x70 */
! 544: u_int32_t an_tx_defers_energy; /* 0x74 */
! 545: u_int32_t an_rx_dups; /* 0x78 */
! 546: u_int32_t an_rx_partial; /* 0x7C */
! 547: u_int32_t an_tx_too_old; /* 0x80 */
! 548: u_int32_t an_rx_too_old; /* 0x84 */
! 549: u_int32_t an_lostsync_max_retries;/* 0x88 */
! 550: u_int32_t an_lostsync_missed_beacons;/* 0x8C */
! 551: u_int32_t an_lostsync_arl_exceeded;/*0x90 */
! 552: u_int32_t an_lostsync_deauthed; /* 0x94 */
! 553: u_int32_t an_lostsync_disassociated;/*0x98 */
! 554: u_int32_t an_lostsync_tsf_timing; /* 0x9C */
! 555: u_int32_t an_tx_host_mcasts; /* 0xA0 */
! 556: u_int32_t an_tx_host_bcasts; /* 0xA4 */
! 557: u_int32_t an_tx_host_ucasts; /* 0xA8 */
! 558: u_int32_t an_tx_host_failed; /* 0xAC */
! 559: u_int32_t an_rx_host_mcasts; /* 0xB0 */
! 560: u_int32_t an_rx_host_bcasts; /* 0xB4 */
! 561: u_int32_t an_rx_host_ucasts; /* 0xB8 */
! 562: u_int32_t an_rx_host_discarded; /* 0xBC */
! 563: u_int32_t an_tx_hmac_mcasts; /* 0xC0 */
! 564: u_int32_t an_tx_hmac_bcasts; /* 0xC4 */
! 565: u_int32_t an_tx_hmac_ucasts; /* 0xC8 */
! 566: u_int32_t an_tx_hmac_failed; /* 0xCC */
! 567: u_int32_t an_rx_hmac_mcasts; /* 0xD0 */
! 568: u_int32_t an_rx_hmac_bcasts; /* 0xD4 */
! 569: u_int32_t an_rx_hmac_ucasts; /* 0xD8 */
! 570: u_int32_t an_rx_hmac_discarded; /* 0xDC */
! 571: u_int32_t an_tx_hmac_accepted; /* 0xE0 */
! 572: u_int32_t an_ssid_mismatches; /* 0xE4 */
! 573: u_int32_t an_ap_mismatches; /* 0xE8 */
! 574: u_int32_t an_rates_mismatches; /* 0xEC */
! 575: u_int32_t an_auth_rejects; /* 0xF0 */
! 576: u_int32_t an_auth_timeouts; /* 0xF4 */
! 577: u_int32_t an_assoc_rejects; /* 0xF8 */
! 578: u_int32_t an_assoc_timeouts; /* 0xFC */
! 579: u_int32_t an_reason_outside_table;/* 0x100 */
! 580: u_int32_t an_reason1; /* 0x104 */
! 581: u_int32_t an_reason2; /* 0x108 */
! 582: u_int32_t an_reason3; /* 0x10C */
! 583: u_int32_t an_reason4; /* 0x110 */
! 584: u_int32_t an_reason5; /* 0x114 */
! 585: u_int32_t an_reason6; /* 0x118 */
! 586: u_int32_t an_reason7; /* 0x11C */
! 587: u_int32_t an_reason8; /* 0x120 */
! 588: u_int32_t an_reason9; /* 0x124 */
! 589: u_int32_t an_reason10; /* 0x128 */
! 590: u_int32_t an_reason11; /* 0x12C */
! 591: u_int32_t an_reason12; /* 0x130 */
! 592: u_int32_t an_reason13; /* 0x134 */
! 593: u_int32_t an_reason14; /* 0x138 */
! 594: u_int32_t an_reason15; /* 0x13C */
! 595: u_int32_t an_reason16; /* 0x140 */
! 596: u_int32_t an_reason17; /* 0x144 */
! 597: u_int32_t an_reason18; /* 0x148 */
! 598: u_int32_t an_reason19; /* 0x14C */
! 599: u_int32_t an_rx_mgmt_pkts; /* 0x150 */
! 600: u_int32_t an_tx_mgmt_pkts; /* 0x154 */
! 601: u_int32_t an_rx_refresh_pkts; /* 0x158 */
! 602: u_int32_t an_tx_refresh_pkts; /* 0x15C */
! 603: u_int32_t an_rx_poll_pkts; /* 0x160 */
! 604: u_int32_t an_tx_poll_pkts; /* 0x164 */
! 605: u_int32_t an_host_retries; /* 0x168 */
! 606: u_int32_t an_lostsync_hostreq; /* 0x16C */
! 607: u_int32_t an_host_tx_bytes; /* 0x170 */
! 608: u_int32_t an_host_rx_bytes; /* 0x174 */
! 609: u_int32_t an_uptime_usecs; /* 0x178 */
! 610: u_int32_t an_uptime_secs; /* 0x17C */
! 611: u_int32_t an_lostsync_better_ap; /* 0x180 */
! 612: u_int32_t an_rsvd[10];
! 613: } __attribute__((__packed__));
! 614:
! 615: /*
! 616: * Volatile WEP Key
! 617: */
! 618: #define AN_RID_WEP_VOLATILE 0xFF15 /* Volatile WEP Key */
! 619: struct an_rid_wepkey {
! 620: u_int16_t an_key_index; /* 0x02 */
! 621: u_int8_t an_mac_addr[6]; /* 0x04 */
! 622: u_int16_t an_key_len; /* 0x0A */
! 623: u_int8_t an_key[16]; /* 0x0C */
! 624: } __attribute__((__packed__));
! 625:
! 626: /*
! 627: * Persistent WEP Key
! 628: */
! 629: #define AN_RID_WEP_PERSISTENT 0xFF16 /* Persistent WEP Key */
! 630:
! 631: /*
! 632: * LEAP Key
! 633: */
! 634: #define AN_RID_LEAP_USER 0xFF23 /* User Name for LEAP */
! 635: #define AN_RID_LEAP_PASS 0xFF24 /* Password for LEAP */
! 636: struct an_rid_leapkey {
! 637: u_int16_t an_key_len; /* 0x02 */
! 638: u_int8_t an_key[32]; /* 0x04 */
! 639: } __attribute__((__packed__));
! 640:
! 641: /*
! 642: * MIC
! 643: */
! 644: #define AN_RID_MIC 0xFF57 /* Message Integrity Check */
! 645: struct an_rid_mic {
! 646: u_int16_t an_mic_state; /* 0x02 */
! 647: u_int16_t an_mic_mcast_valid; /* 0x04 */
! 648: u_int8_t an_mic_mcast[16]; /* 0x06 */
! 649: u_int16_t an_mic_ucast_valid; /* 0x16 */
! 650: u_int8_t an_mic_ucast[16]; /* 0x18 */
! 651: } __attribute__((__packed__));
! 652:
! 653: /*
! 654: * Receive frame structure.
! 655: */
! 656: struct an_rxframe {
! 657: u_int32_t an_rx_time; /* 0x00 */
! 658: u_int16_t an_rx_status; /* 0x04 */
! 659: u_int16_t an_rx_payload_len; /* 0x06 */
! 660: u_int8_t an_rsvd0; /* 0x08 */
! 661: u_int8_t an_rx_signal_strength; /* 0x09 */
! 662: u_int8_t an_rx_rate; /* 0x0A */
! 663: u_int8_t an_rx_chan; /* 0x0B */
! 664: u_int8_t an_rx_assoc_cnt; /* 0x0C */
! 665: u_int8_t an_rsvd1[3]; /* 0x0D */
! 666: u_int8_t an_plcp_hdr[4]; /* 0x10 */
! 667: struct ieee80211_frame_addr4 an_whdr;
! 668: u_int16_t an_gaplen; /* 0x32 */
! 669: } __attribute__((__packed__));
! 670: #define AN_RXGAP_MAX 8
! 671:
! 672: /*
! 673: * Transmit frame structure.
! 674: */
! 675: struct an_txframe {
! 676: u_int32_t an_tx_sw; /* 0x00 */
! 677: u_int16_t an_tx_status; /* 0x04 */
! 678: u_int16_t an_tx_payload_len; /* 0x06 */
! 679: u_int16_t an_tx_ctl; /* 0x08 */
! 680: u_int16_t an_tx_assoc_id; /* 0x0A */
! 681: u_int16_t an_tx_retry; /* 0x0C */
! 682: u_int8_t an_tx_assoc_cnt; /* 0x0E */
! 683: u_int8_t an_tx_rate; /* 0x0F */
! 684: u_int8_t an_tx_max_long_retries; /* 0x10 */
! 685: u_int8_t an_tx_max_short_retries; /*0x11 */
! 686: u_int8_t an_rsvd0[2]; /* 0x12 */
! 687: struct ieee80211_frame_addr4 an_whdr;
! 688: u_int16_t an_gaplen; /* 0x32 */
! 689: } __attribute__((__packed__));
! 690:
! 691: #define AN_TXGAP_802_3 0
! 692: #define AN_TXGAP_802_11 6
! 693:
! 694: struct an_802_3_hdr {
! 695: u_int16_t an_802_3_status;
! 696: u_int16_t an_802_3_payload_len;
! 697: u_int8_t an_dst_addr[6];
! 698: u_int8_t an_src_addr[6];
! 699: } __attribute__((__packed__));
! 700:
! 701: #define AN_TXSTAT_EXCESS_RETRY 0x0002
! 702: #define AN_TXSTAT_LIFE_EXCEEDED 0x0004
! 703: #define AN_TXSTAT_AID_FAIL 0x0008
! 704: #define AN_TXSTAT_MAC_DISABLED 0x0010
! 705: #define AN_TXSTAT_ASSOC_LOST 0x0020
! 706:
! 707: #define AN_TXCTL_RSVD 0x0001
! 708: #define AN_TXCTL_TXOK_INTR 0x0002
! 709: #define AN_TXCTL_TXERR_INTR 0x0004
! 710: #define AN_TXCTL_HEADER_TYPE 0x0008
! 711: #define AN_TXCTL_PAYLOAD_TYPE 0x0010
! 712: #define AN_TXCTL_NORELEASE 0x0020
! 713: #define AN_TXCTL_NORETRIES 0x0040
! 714: #define AN_TXCTL_CLEAR_AID 0x0080
! 715: #define AN_TXCTL_STRICT_ORDER 0x0100
! 716: #define AN_TXCTL_USE_RTS 0x0200
! 717:
! 718: #define AN_HEADERTYPE_8023 0x0000
! 719: #define AN_HEADERTYPE_80211 0x0008
! 720:
! 721: #define AN_PAYLOADTYPE_ETHER 0x0000
! 722: #define AN_PAYLOADTYPE_LLC 0x0010
! 723:
! 724: #define AN_TXCTL_80211 \
! 725: (AN_TXCTL_TXOK_INTR|AN_TXCTL_TXERR_INTR|AN_HEADERTYPE_80211| \
! 726: AN_PAYLOADTYPE_LLC|AN_TXCTL_NORELEASE)
! 727:
! 728: #define AN_TXCTL_8023 \
! 729: (AN_TXCTL_TXOK_INTR|AN_TXCTL_TXERR_INTR|AN_HEADERTYPE_8023| \
! 730: AN_PAYLOADTYPE_ETHER|AN_TXCTL_NORELEASE)
! 731:
! 732: #define AN_STAT_BADCRC 0x0001
! 733: #define AN_STAT_UNDECRYPTABLE 0x0002
! 734: #define AN_STAT_ERRSTAT 0x0003
! 735: #define AN_STAT_MAC_PORT 0x0700
! 736: #define AN_STAT_1042 0x2000 /* RFC1042 encoded */
! 737: #define AN_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */
! 738: #define AN_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */
! 739: #define AN_RXSTAT_MSG_TYPE 0xE000
! 740:
! 741: #define AN_ENC_TX_802_3 0x00
! 742: #define AN_ENC_TX_802_11 0x11
! 743: #define AN_ENC_TX_E_II 0x0E
! 744:
! 745: #define AN_ENC_TX_1042 0x00
! 746: #define AN_ENC_TX_TUNNEL 0xF8
! 747:
! 748: #define AN_TXCNTL_MACPORT 0x00FF
! 749: #define AN_TXCNTL_STRUCTTYPE 0xFF00
! 750:
! 751: #endif /* _DEV_IC_ANREG_H */
CVSweb
![[BACK]](/icons/back.gif){kind=icon}
Return to anreg.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / sys / dev / ic