Return to i2c_io.h CVS log

Up to [local] / sys / dev / i2c

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/*	$OpenBSD: i2c_io.h,v 1.1 2004/05/23 17:33:43 grange Exp $	*/
/*	$NetBSD: i2c_io.h,v 1.1 2003/09/30 00:35:31 thorpej Exp $	*/

/*
 * Copyright (c) 2003 Wasabi Systems, Inc.
 * All rights reserved.
 *
 * Written by Jason R. Thorpe for Wasabi Systems, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed for the NetBSD Project by
 *      Wasabi Systems, Inc.
 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
 *    or promote products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _DEV_I2C_I2C_IO_H_
#define	_DEV_I2C_I2C_IO_H_

#include <sys/ioccom.h>

/* I2C bus address. */
typedef uint16_t i2c_addr_t;

/* High-level I2C operations. */
typedef enum {
	I2C_OP_READ		= 0,
	I2C_OP_READ_WITH_STOP	= 1,
	I2C_OP_WRITE		= 2,
	I2C_OP_WRITE_WITH_STOP	= 3,
} i2c_op_t;

#define	I2C_OP_READ_P(x)	(((int)(x) & 2) == 0)
#define	I2C_OP_WRITE_P(x)	(! I2C_OP_READ_P(x))
#define	I2C_OP_STOP_P(x)	(((int)(x) & 1) != 0)

/*
 * This structure describes a single I2C control script fragment.
 *
 * Note that use of this scripted API allows for support of automated
 * SMBus controllers.  The following table maps SMBus operations to
 * script fragment configuration:
 *
 *	SMBus "write byte":		I2C_OP_WRITE_WITH_STOP
 *					cmdlen = 1
 *
 *	SMBus "read byte":		I2C_OP_READ_WITH_STOP
 *					cmdlen = 1
 *
 *	SMBus "receive byte":		I2C_OP_READ_WITH_STOP
 *					cmdlen = 0
 *
 * Note that while each of these 3 SMBus operations implies a STOP
 * (which an automated controller will likely perform automatically),
 * non-SMBus clients may continue to function even if they issue
 * I2C_OP_WRITE and I2C_OP_READ.
 */

#ifdef notyet
/*
 * I2C_IOCTL_EXEC:
 *
 *	User ioctl to execute an i2c operation.
 */
typedef struct i2c_ioctl_exec {
	i2c_op_t iie_op;		/* operation to perform */
	i2c_addr_t iie_addr;		/* address of device */
	const void *iie_cmd;		/* pointer to command */
	size_t iie_cmdlen;		/* length of command */
	void *iie_buf;			/* pointer to data buffer */
	size_t iie_buflen;		/* length of data buffer */
} i2c_ioctl_exec_t;
#define	I2C_EXEC_MAX_CMDLEN	32
#define	I2C_EXEC_MAX_BUFLEN	32

#define	I2C_IOCTL_EXEC		 _IOW('I', 0, i2c_ioctl_exec_t)
#endif

#endif /* _DEV_I2C_I2C_IO_H_ */