File: [local] / sys / dev / i2c / adt7460.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:09:57 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: adt7460.c,v 1.18 2007/06/24 05:34:35 dlg Exp $ */
/*
* Copyright (c) 2005 Mark Kettenis
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/sensors.h>
#include <dev/i2c/i2cvar.h>
/* ADT7460 registers */
#define ADT7460_2_5V 0x20
#define ADT7460_VCCP 0x21
#define ADT7460_VCC 0x22
#define ADT7460_V5 0x23
#define ADT7460_V12 0x24
#define ADT7460_REM1_TEMP 0x25
#define ADT7460_LOCAL_TEMP 0x26
#define ADT7460_REM2_TEMP 0x27
#define ADT7460_TACH1L 0x28
#define ADT7460_TACH1H 0x29
#define ADT7460_TACH2L 0x2a
#define ADT7460_TACH2H 0x2b
#define ADT7460_TACH3L 0x2c
#define ADT7460_TACH3H 0x2d
#define ADT7460_TACH4L 0x2e
#define ADT7460_TACH4H 0x2f
#define ADT7460_REVISION 0x3f
#define ADT7460_CONFIG 0x40
#define ADT7460_CONFIG_Vcc 0x80
/* Sensors */
#define ADT_2_5V 0
#define ADT_VCCP 1
#define ADT_VCC 2
#define ADT_V5 3
#define ADT_V12 4
#define ADT_REM1_TEMP 5
#define ADT_LOCAL_TEMP 6
#define ADT_REM2_TEMP 7
#define ADT_TACH1 8
#define ADT_TACH2 9
#define ADT_TACH3 10
#define ADT_TACH4 11
#define ADT_NUM_SENSORS 12
struct adt_chip {
const char *name;
short ratio[5];
int type;
short vcc;
} adt_chips[] = {
/* register 0x20 0x21 0x22 0x23 0x24 type */
/* 2.5v vccp vcc 5v 12v */
{ "adt7460", { 2500, 0, 3300, 0, 0 }, 7460, 5000 },
{ "adt7467", { 2500, 2250, 3300, 5000, 12000 }, 7467, 5000 },
{ "adt7475", { 0, 2250, 3300, 0, 0 }, 7475, 0 },
{ "adt7476", { 2500, 2250, 3300, 5000, 12000 }, 7476, 0 },
{ "adm1027", { 2500, 2250, 3300, 5000, 12000 }, 1027, 5000 },
{ "lm85", { 2500, 2250, 3300, 5000, 12000 }, 7467, 0 },
{ "emc6d100", { 2500, 2250, 3300, 5000, 12000 }, 6100, 0 },
{ "emc6w201", { 2500, 2250, 3300, 5000, 12000 }, 6201, 0 },
{ "lm96000", { 2500, 2250, 3300, 5000, 12000 }, 96000, 0 },
{ "sch5017", { 5000, 2250, 3300, 5000, 12000 }, 5017, 0 }
};
struct {
char sensor;
u_int8_t cmd;
u_short index;
} worklist[] = {
{ ADT_2_5V, ADT7460_2_5V, 32768 + 0 },
{ ADT_VCCP, ADT7460_VCCP, 32768 + 1 },
{ ADT_VCC, ADT7460_VCC, 32768 + 2 },
{ ADT_V5, ADT7460_V5, 32768 + 3 },
{ ADT_V12, ADT7460_V12, 32768 + 4 },
{ ADT_REM1_TEMP, ADT7460_REM1_TEMP },
{ ADT_LOCAL_TEMP, ADT7460_LOCAL_TEMP },
{ ADT_REM2_TEMP, ADT7460_REM2_TEMP },
{ ADT_TACH1, ADT7460_TACH1L },
{ ADT_TACH2, ADT7460_TACH2L },
{ ADT_TACH3, ADT7460_TACH3L },
{ ADT_TACH4, ADT7460_TACH4L },
};
struct adt_softc {
struct device sc_dev;
i2c_tag_t sc_tag;
i2c_addr_t sc_addr;
u_int8_t sc_conf;
struct adt_chip *chip;
struct ksensor sc_sensor[ADT_NUM_SENSORS];
struct ksensordev sc_sensordev;
};
int adt_match(struct device *, void *, void *);
void adt_attach(struct device *, struct device *, void *);
void adt_refresh(void *);
struct cfattach adt_ca = {
sizeof(struct adt_softc), adt_match, adt_attach
};
struct cfdriver adt_cd = {
NULL, "adt", DV_DULL
};
int
adt_match(struct device *parent, void *match, void *aux)
{
struct i2c_attach_args *ia = aux;
int i;
for (i = 0; i < sizeof(adt_chips) / sizeof(adt_chips[0]); i++)
if (strcmp(ia->ia_name, adt_chips[i].name) == 0)
return (1);
return (0);
}
void
adt_attach(struct device *parent, struct device *self, void *aux)
{
struct adt_softc *sc = (struct adt_softc *)self;
struct i2c_attach_args *ia = aux;
u_int8_t cmd, rev, data;
int i;
sc->sc_tag = ia->ia_tag;
sc->sc_addr = ia->ia_addr;
iic_acquire_bus(sc->sc_tag, 0);
for (i = 0; i < sizeof(adt_chips) / sizeof(adt_chips[0]); i++) {
if (strcmp(ia->ia_name, adt_chips[i].name) == 0) {
sc->chip = &adt_chips[i];
break;
}
}
cmd = ADT7460_REVISION;
if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
sc->sc_addr, &cmd, sizeof cmd, &rev, sizeof rev, 0)) {
iic_release_bus(sc->sc_tag, 0);
printf(": cannot read REV register\n");
return;
}
cmd = ADT7460_CONFIG;
if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
sc->sc_addr, &cmd, sizeof cmd, &sc->sc_conf, sizeof sc->sc_conf, 0)) {
iic_release_bus(sc->sc_tag, 0);
printf(": cannot read config register\n");
return;
}
if (sc->chip->type == 7460) {
data = 1;
cmd = ADT7460_CONFIG;
if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP,
sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) {
iic_release_bus(sc->sc_tag, 0);
printf(": cannot set control register\n");
return;
}
}
iic_release_bus(sc->sc_tag, 0);
printf(": %s rev 0x%02x", ia->ia_name, rev);
/* Initialize sensor data. */
strlcpy(sc->sc_sensordev.xname, sc->sc_dev.dv_xname,
sizeof(sc->sc_sensordev.xname));
sc->sc_sensor[ADT_2_5V].type = SENSOR_VOLTS_DC;
strlcpy(sc->sc_sensor[ADT_2_5V].desc, "+2.5Vin",
sizeof(sc->sc_sensor[ADT_2_5V].desc));
if (sc->chip->type == 5017)
strlcpy(sc->sc_sensor[ADT_2_5V].desc, "+5VTR",
sizeof(sc->sc_sensor[ADT_2_5V].desc));
sc->sc_sensor[ADT_VCCP].type = SENSOR_VOLTS_DC;
strlcpy(sc->sc_sensor[ADT_VCCP].desc, "Vccp",
sizeof(sc->sc_sensor[ADT_VCCP].desc));
sc->sc_sensor[ADT_VCC].type = SENSOR_VOLTS_DC;
strlcpy(sc->sc_sensor[ADT_VCC].desc, "Vcc",
sizeof(sc->sc_sensor[ADT_VCC].desc));
sc->sc_sensor[ADT_V5].type = SENSOR_VOLTS_DC;
strlcpy(sc->sc_sensor[ADT_V5].desc, "+5V",
sizeof(sc->sc_sensor[ADT_V5].desc));
sc->sc_sensor[ADT_V12].type = SENSOR_VOLTS_DC;
strlcpy(sc->sc_sensor[ADT_V12].desc, "+12V",
sizeof(sc->sc_sensor[ADT_V12].desc));
sc->sc_sensor[ADT_REM1_TEMP].type = SENSOR_TEMP;
strlcpy(sc->sc_sensor[ADT_REM1_TEMP].desc, "Remote",
sizeof(sc->sc_sensor[ADT_REM1_TEMP].desc));
sc->sc_sensor[ADT_LOCAL_TEMP].type = SENSOR_TEMP;
strlcpy(sc->sc_sensor[ADT_LOCAL_TEMP].desc, "Internal",
sizeof(sc->sc_sensor[ADT_LOCAL_TEMP].desc));
sc->sc_sensor[ADT_REM2_TEMP].type = SENSOR_TEMP;
strlcpy(sc->sc_sensor[ADT_REM2_TEMP].desc, "Remote",
sizeof(sc->sc_sensor[ADT_REM2_TEMP].desc));
sc->sc_sensor[ADT_TACH1].type = SENSOR_FANRPM;
sc->sc_sensor[ADT_TACH2].type = SENSOR_FANRPM;
sc->sc_sensor[ADT_TACH3].type = SENSOR_FANRPM;
sc->sc_sensor[ADT_TACH4].type = SENSOR_FANRPM;
if (sensor_task_register(sc, adt_refresh, 5) == NULL) {
printf(", unable to register update task\n");
return;
}
for (i = 0; i < ADT_NUM_SENSORS; i++) {
if (worklist[i].index >= 32768 &&
sc->chip->ratio[worklist[i].index - 32768] == 0)
continue;
sc->sc_sensor[i].flags &= ~SENSOR_FINVALID;
sensor_attach(&sc->sc_sensordev, &sc->sc_sensor[i]);
}
sensordev_install(&sc->sc_sensordev);
printf("\n");
}
void
adt_refresh(void *arg)
{
struct adt_softc *sc = arg;
u_int8_t cmd, data, data2;
u_int16_t fan;
int i, ratio;
iic_acquire_bus(sc->sc_tag, 0);
for (i = 0; i < sizeof worklist / sizeof(worklist[0]); i++) {
if (worklist[i].index >= 32768) {
ratio = sc->chip->ratio[worklist[i].index - 32768];
if (ratio == 0) /* do not read a dead register */
continue;
}
cmd = worklist[i].cmd;
if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
sc->sc_addr, &cmd, sizeof cmd, &data, sizeof data, 0)) {
sc->sc_sensor[i].flags |= SENSOR_FINVALID;
continue;
}
sc->sc_sensor[i].flags &= ~SENSOR_FINVALID;
switch (worklist[i].sensor) {
case ADT_VCC:
if (sc->chip->vcc && (sc->sc_conf & ADT7460_CONFIG_Vcc))
ratio = sc->chip->vcc;
/* FALLTHROUGH */
case ADT_2_5V:
case ADT_VCCP:
case ADT_V5:
case ADT_V12:
sc->sc_sensor[i].value = ratio * 1000 * (u_int)data / 192;
break;
case ADT_LOCAL_TEMP:
case ADT_REM1_TEMP:
case ADT_REM2_TEMP:
if (data == 0x80)
sc->sc_sensor[i].flags |= SENSOR_FINVALID;
else
sc->sc_sensor[i].value =
(int8_t)data * 1000000 + 273150000;
break;
case ADT_TACH1:
case ADT_TACH2:
case ADT_TACH3:
case ADT_TACH4:
cmd = worklist[i].cmd + 1; /* TACHnH follows TACHnL */
if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
sc->sc_addr, &cmd, sizeof cmd, &data2, sizeof data2, 0)) {
sc->sc_sensor[i].flags |= SENSOR_FINVALID;
continue;
}
fan = data + (data2 << 8);
if (fan == 0 || fan == 0xffff)
sc->sc_sensor[i].flags |= SENSOR_FINVALID;
else
sc->sc_sensor[i].value = (90000 * 60) / fan;
break;
default:
sc->sc_sensor[i].flags |= SENSOR_FINVALID;
break;
}
}
iic_release_bus(sc->sc_tag, 0);
}