[BACK]Return to if_malo_cardbus.c CVS log [TXT][DIR] Up to [local] / sys / dev / cardbus

Annotation of sys/dev/cardbus/if_malo_cardbus.c, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: if_malo_cardbus.c,v 1.5 2006/11/29 10:37:11 mglocker Exp $ */
        !             2:
        !             3: /*
        !             4:  * Copyright (c) 2006 Claudio Jeker <claudio@openbsd.org>
        !             5:  *
        !             6:  * Permission to use, copy, modify, and distribute this software for any
        !             7:  * purpose with or without fee is hereby granted, provided that the above
        !             8:  * copyright notice and this permission notice appear in all copies.
        !             9:  *
        !            10:  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
        !            11:  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
        !            12:  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
        !            13:  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
        !            14:  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
        !            15:  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
        !            16:  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
        !            17:  */
        !            18:
        !            19: #include "bpfilter.h"
        !            20:
        !            21: #include <sys/param.h>
        !            22: #include <sys/mbuf.h>
        !            23: #include <sys/socket.h>
        !            24: #include <sys/systm.h>
        !            25: #include <sys/timeout.h>
        !            26:
        !            27: #include <net/if.h>
        !            28: #include <net/if_media.h>
        !            29:
        !            30: #include <netinet/in.h>
        !            31: #include <netinet/if_ether.h>
        !            32:
        !            33: #include <net80211/ieee80211_var.h>
        !            34: #include <net80211/ieee80211_radiotap.h>
        !            35:
        !            36: #include <dev/pci/pcireg.h>
        !            37: #include <dev/pci/pcivar.h>
        !            38: #include <dev/pci/pcidevs.h>
        !            39:
        !            40: #include <dev/cardbus/cardbusvar.h>
        !            41:
        !            42: #include <dev/ic/malo.h>
        !            43:
        !            44: struct malo_cardbus_softc {
        !            45:        struct malo_softc       sc_malo;
        !            46:
        !            47:        /* cardbus specific goo */
        !            48:        cardbus_devfunc_t       sc_ct;
        !            49:        cardbustag_t            sc_tag;
        !            50:        void                    *sc_ih;
        !            51:
        !            52:        bus_size_t              sc_mapsize1;
        !            53:        bus_size_t              sc_mapsize2;
        !            54:        pcireg_t                sc_bar1_val;
        !            55:        pcireg_t                sc_bar2_val;
        !            56:        int                     sc_intrline;
        !            57: };
        !            58:
        !            59: int    malo_cardbus_match(struct device *parent, void *match, void *aux);
        !            60: void   malo_cardbus_attach(struct device *parent, struct device *self,
        !            61:            void *aux);
        !            62: int    malo_cardbus_detach(struct device *self, int flags);
        !            63: void   malo_cardbus_setup(struct malo_cardbus_softc *csc);
        !            64: int    malo_cardbus_enable(struct malo_softc *sc);
        !            65: void   malo_cardbus_disable(struct malo_softc *sc);
        !            66:
        !            67: struct cfattach malo_cardbus_ca = {
        !            68:        sizeof (struct malo_cardbus_softc), malo_cardbus_match,
        !            69:        malo_cardbus_attach, malo_cardbus_detach
        !            70: };
        !            71:
        !            72: static const struct cardbus_matchid malo_cardbus_devices[] = {
        !            73:        { PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_88W8310 },
        !            74:        { PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_88W8335_1 },
        !            75:        { PCI_VENDOR_MARVELL, PCI_PRODUCT_MARVELL_88W8335_2 }
        !            76: };
        !            77:
        !            78: int
        !            79: malo_cardbus_match(struct device *parent, void *match, void *aux)
        !            80: {
        !            81:        return (cardbus_matchbyid(aux, malo_cardbus_devices,
        !            82:            sizeof (malo_cardbus_devices) / sizeof (malo_cardbus_devices[0])));
        !            83: }
        !            84:
        !            85: void
        !            86: malo_cardbus_attach(struct device *parent, struct device *self, void *aux)
        !            87: {
        !            88:        struct malo_cardbus_softc *csc = (struct malo_cardbus_softc *)self;
        !            89:        struct cardbus_attach_args *ca = aux;
        !            90:        struct malo_softc *sc = &csc->sc_malo;
        !            91:        cardbus_devfunc_t ct = ca->ca_ct;
        !            92:        bus_addr_t base;
        !            93:        int error;
        !            94:
        !            95:        sc->sc_dmat = ca->ca_dmat;
        !            96:        csc->sc_ct = ct;
        !            97:        csc->sc_tag = ca->ca_tag;
        !            98:        csc->sc_intrline = ca->ca_intrline;
        !            99:
        !           100:        /* power management hooks */
        !           101:        sc->sc_enable = malo_cardbus_enable;
        !           102:        sc->sc_disable = malo_cardbus_disable;
        !           103: #if 0
        !           104:        sc->sc_power = malo_cardbus_power;
        !           105: #endif
        !           106:
        !           107:        /* map control/status registers */
        !           108:        error = Cardbus_mapreg_map(ct, CARDBUS_BASE0_REG,
        !           109:            CARDBUS_MAPREG_TYPE_MEM, 0, &sc->sc_mem1_bt,
        !           110:            &sc->sc_mem1_bh, &base, &csc->sc_mapsize1);
        !           111:        if (error != 0) {
        !           112:                printf(": could not map 1st memory space\n");
        !           113:                return;
        !           114:        }
        !           115:        csc->sc_bar1_val = base | CARDBUS_MAPREG_TYPE_MEM;
        !           116:
        !           117:        /* map control/status registers */
        !           118:        error = Cardbus_mapreg_map(ct, CARDBUS_BASE1_REG,
        !           119:            CARDBUS_MAPREG_TYPE_MEM, 0, &sc->sc_mem2_bt,
        !           120:            &sc->sc_mem2_bh, &base, &csc->sc_mapsize2);
        !           121:        if (error != 0) {
        !           122:                printf(": could not map 2nd memory space\n");
        !           123:                Cardbus_mapreg_unmap(ct, CARDBUS_BASE0_REG, sc->sc_mem1_bt,
        !           124:                    sc->sc_mem1_bh, csc->sc_mapsize1);
        !           125:                return;
        !           126:        }
        !           127:        csc->sc_bar2_val = base | CARDBUS_MAPREG_TYPE_MEM;
        !           128:
        !           129:        /* set up the PCI configuration registers */
        !           130:        malo_cardbus_setup(csc);
        !           131:
        !           132:        printf(": irq %d", csc->sc_intrline);
        !           133:
        !           134:        error = malo_attach(sc);
        !           135:        if (error != 0)
        !           136:                malo_cardbus_detach(&sc->sc_dev, 0);
        !           137:
        !           138:        Cardbus_function_disable(ct);
        !           139: }
        !           140:
        !           141: int
        !           142: malo_cardbus_detach(struct device *self, int flags)
        !           143: {
        !           144:        struct malo_cardbus_softc *csc = (struct malo_cardbus_softc *)self;
        !           145:        struct malo_softc *sc = &csc->sc_malo;
        !           146:        cardbus_devfunc_t ct = csc->sc_ct;
        !           147:        cardbus_chipset_tag_t cc = ct->ct_cc;
        !           148:        cardbus_function_tag_t cf = ct->ct_cf;
        !           149:        int error;
        !           150:
        !           151:        error = malo_detach(sc);
        !           152:        if (error != 0)
        !           153:                return (error);
        !           154:
        !           155:        /* unhook the interrupt handler */
        !           156:        if (csc->sc_ih != NULL) {
        !           157:                cardbus_intr_disestablish(cc, cf, csc->sc_ih);
        !           158:                csc->sc_ih = NULL;
        !           159:        }
        !           160:
        !           161:        /* release bus space and close window */
        !           162:        Cardbus_mapreg_unmap(ct, CARDBUS_BASE0_REG, sc->sc_mem1_bt,
        !           163:            sc->sc_mem1_bh, csc->sc_mapsize1);
        !           164:        Cardbus_mapreg_unmap(ct, CARDBUS_BASE1_REG, sc->sc_mem2_bt,
        !           165:            sc->sc_mem2_bh, csc->sc_mapsize2);
        !           166:
        !           167:        return (0);
        !           168: }
        !           169:
        !           170: void
        !           171: malo_cardbus_setup(struct malo_cardbus_softc *csc)
        !           172: {
        !           173:        cardbus_devfunc_t ct = csc->sc_ct;
        !           174:        cardbus_chipset_tag_t cc = ct->ct_cc;
        !           175:        cardbus_function_tag_t cf = ct->ct_cf;
        !           176:        pcireg_t reg;
        !           177:
        !           178:        /* program the BAR */
        !           179:        cardbus_conf_write(cc, cf, csc->sc_tag, CARDBUS_BASE0_REG,
        !           180:            csc->sc_bar1_val);
        !           181:        cardbus_conf_write(cc, cf, csc->sc_tag, CARDBUS_BASE1_REG,
        !           182:            csc->sc_bar2_val);
        !           183:
        !           184:        /* make sure the right access type is on the cardbus bridge */
        !           185:        (*cf->cardbus_ctrl)(cc, CARDBUS_MEM_ENABLE);
        !           186:        (*cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
        !           187:
        !           188:        /* enable the appropriate bits in the PCI CSR */
        !           189:        reg = cardbus_conf_read(cc, cf, csc->sc_tag,
        !           190:            CARDBUS_COMMAND_STATUS_REG);
        !           191:        reg |= CARDBUS_COMMAND_MASTER_ENABLE | CARDBUS_COMMAND_MEM_ENABLE;
        !           192:        cardbus_conf_write(cc, cf, csc->sc_tag, CARDBUS_COMMAND_STATUS_REG,
        !           193:            reg);
        !           194: }
        !           195:
        !           196: int
        !           197: malo_cardbus_enable(struct malo_softc *sc)
        !           198: {
        !           199:        struct malo_cardbus_softc *csc = (struct malo_cardbus_softc *)sc;
        !           200:        cardbus_devfunc_t ct = csc->sc_ct;
        !           201:        cardbus_chipset_tag_t cc = ct->ct_cc;
        !           202:        cardbus_function_tag_t cf = ct->ct_cf;
        !           203:
        !           204:        /* power on the socket */
        !           205:        Cardbus_function_enable(ct);
        !           206:
        !           207:        /* setup the PCI configuration registers */
        !           208:        malo_cardbus_setup(csc);
        !           209:
        !           210:        /* map and establish the interrupt handler */
        !           211:        csc->sc_ih = cardbus_intr_establish(cc, cf, csc->sc_intrline, IPL_NET,
        !           212:            malo_intr, sc, sc->sc_dev.dv_xname);
        !           213:        if (csc->sc_ih == NULL) {
        !           214:                printf("%s: could not establish interrupt at %d\n",
        !           215:                    sc->sc_dev.dv_xname, csc->sc_intrline);
        !           216:                Cardbus_function_disable(ct);
        !           217:                return (1);
        !           218:        }
        !           219:
        !           220:        return (0);
        !           221: }
        !           222:
        !           223: void
        !           224: malo_cardbus_disable(struct malo_softc *sc)
        !           225: {
        !           226:        struct malo_cardbus_softc *csc = (struct malo_cardbus_softc *)sc;
        !           227:        cardbus_devfunc_t ct = csc->sc_ct;
        !           228:        cardbus_chipset_tag_t cc = ct->ct_cc;
        !           229:        cardbus_function_tag_t cf = ct->ct_cf;
        !           230:
        !           231:        /* unhook the interrupt handler */
        !           232:        cardbus_intr_disestablish(cc, cf, csc->sc_ih);
        !           233:        csc->sc_ih = NULL;
        !           234:
        !           235:        /* power down the socket */
        !           236:        Cardbus_function_disable(ct);
        !           237: }

CVSweb