[BACK]Return to cardbus_exrom.c CVS log [TXT][DIR] Up to [local] / sys / dev / cardbus

Annotation of sys/dev/cardbus/cardbus_exrom.c, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: cardbus_exrom.c,v 1.4 2005/09/13 18:44:38 fgsch Exp $ */
        !             2: /*     $NetBSD: cardbus_exrom.c,v 1.4 2000/02/03 06:47:31 thorpej Exp $        */
        !             3:
        !             4: /*
        !             5:  * Copyright (c) 1999 The NetBSD Foundation, Inc.
        !             6:  * All rights reserved.
        !             7:  *
        !             8:  * This code is derived from software contributed to
        !             9:  * The NetBSD Foundation by Johan Danielsson.
        !            10:  *
        !            11:  * Redistribution and use in source and binary forms, with or without
        !            12:  * modification, are permitted provided that the following conditions
        !            13:  * are met:
        !            14:  *
        !            15:  * 1. Redistributions of source code must retain the above copyright
        !            16:  *    notice, this list of conditions and the following disclaimer.
        !            17:  *
        !            18:  * 2. Redistributions in binary form must reproduce the above copyright
        !            19:  *    notice, this list of conditions and the following disclaimer in the
        !            20:  *    documentation and/or other materials provided with the distribution.
        !            21:  *
        !            22:  * 3. Neither the name of The NetBSD Foundation nor the names of its
        !            23:  *    contributors may be used to endorse or promote products derived
        !            24:  *    from this software without specific prior written permission.
        !            25:  *
        !            26:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
        !            27:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
        !            28:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
        !            29:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
        !            30:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
        !            31:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
        !            32:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
        !            33:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
        !            34:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
        !            35:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
        !            36:  * POSSIBILITY OF SUCH DAMAGE.
        !            37:  */
        !            38:
        !            39: #include <sys/param.h>
        !            40: #include <sys/systm.h>
        !            41: #include <sys/queue.h>
        !            42: #include <sys/malloc.h>
        !            43:
        !            44: #include <machine/bus.h>
        !            45:
        !            46: #include <dev/cardbus/cardbus_exrom.h>
        !            47:
        !            48: #if defined(CARDBUS_DEBUG)
        !            49: #define        DPRINTF(a)      printf a
        !            50: #else
        !            51: #define        DPRINTF(a)
        !            52: #endif
        !            53:
        !            54: #define READ_INT16(T, H, O)  \
        !            55:        (bus_space_read_1((T), (H), (O)) | \
        !            56:         (bus_space_read_1((T), (H), (O) + 1) << 8))
        !            57:
        !            58: /*
        !            59:  *  A PCI ROM is divided into a number of images. Each image has two
        !            60:  *  data structures, a header located at the start of the image, and a
        !            61:  *  `data structure' at some offset into it.
        !            62:  *
        !            63:  *  The header is a 26 byte structure:
        !            64:  *
        !            65:  *  Offset     Length  Description
        !            66:  *  0x00          1    signature byte 1 (0x55)
        !            67:  *  0x01          1    signature byte 2 (0xAA)
        !            68:  *  0x02         22    processor architecture data
        !            69:  *  0x18          2    pointer to the data structure
        !            70:  *
        !            71:  *  The data structure is a 24 byte structure:
        !            72:  *
        !            73:  *  Offset     Length  Description
        !            74:  *  0x00          4    signature (PCIR)
        !            75:  *  0x04          2    vendor id
        !            76:  *  0x06          2    device id
        !            77:  *  0x08          2    reserved
        !            78:  *  0x0A          2    data structure length
        !            79:  *  0x0C          1    data structure revision (0)
        !            80:  *  0x0D          3    class code
        !            81:  *  0x10          2    image length (in 512 byte blocks)
        !            82:  *  0x12          2    code revision level
        !            83:  *  0x14          1    code type
        !            84:  *  0x15          1    indicator (bit 7 indicates final image)
        !            85:  *  0x16          2    reserved
        !            86:  *
        !            87:  */
        !            88:
        !            89: /*
        !            90:  *  Scan through a PCI expansion ROM, and create subregions for each
        !            91:  *  ROM image. This function assumes that the ROM is mapped at
        !            92:  *  (tag,handle), and that the expansion ROM address decoder is
        !            93:  *  enabled. The PCI specification requires that no other BAR should
        !            94:  *  be accessed while the ROM is enabled, so interrupts should be
        !            95:  *  disabled.
        !            96:  *
        !            97:  * XXX This routine is way too pessimistic and returns as soon as it encounters
        !            98:  * a problem, although not being able to malloc or read a particular image
        !            99:  * may not prevent further images from being read successfully.
        !           100:  */
        !           101: int
        !           102: cardbus_read_exrom(bus_space_tag_t romt, bus_space_handle_t romh,
        !           103:     struct cardbus_rom_image_head *head)
        !           104: {
        !           105:        size_t addr = 0; /* offset of current rom image */
        !           106:        size_t dataptr;
        !           107:        unsigned int rom_image = 0;
        !           108:        size_t image_size;
        !           109:        struct cardbus_rom_image *image;
        !           110:        u_int16_t val;
        !           111:
        !           112:        SIMPLEQ_INIT(head);
        !           113:        do {
        !           114:                val = READ_INT16(romt, romh, addr + CARDBUS_EXROM_SIGNATURE);
        !           115:                if (val != 0xaa55) {
        !           116:                        DPRINTF(("%s: bad header signature in ROM image "
        !           117:                            "%u: 0x%04x\n", __func__, rom_image, val));
        !           118:                        return (1);
        !           119:                }
        !           120:                dataptr = addr + READ_INT16(romt, romh,
        !           121:                    addr + CARDBUS_EXROM_DATA_PTR);
        !           122:
        !           123:                /* get the ROM image size, in blocks */
        !           124:                image_size = READ_INT16(romt, romh,
        !           125:                    dataptr + CARDBUS_EXROM_DATA_IMAGE_LENGTH);
        !           126:                /* XXX
        !           127:                 * Some ROMs seem to have this as zero, can we assume
        !           128:                 * this means 1 block?
        !           129:                 */
        !           130:                if (image_size == 0)
        !           131:                        image_size = 1;
        !           132:                image_size <<= 9;
        !           133:
        !           134:                image = malloc(sizeof(*image), M_DEVBUF, M_NOWAIT);
        !           135:                if (image == NULL) {
        !           136:                        DPRINTF(("%s: out of memory\n", __func__));
        !           137:                        return (1);
        !           138:                }
        !           139:                image->rom_image = rom_image;
        !           140:                image->image_size = image_size;
        !           141:                image->romt = romt;
        !           142:                if (bus_space_subregion(romt, romh, addr,
        !           143:                    image_size, &image->romh)) {
        !           144:                        DPRINTF(("%s: bus_space_subregion failed", __func__));
        !           145:                        free(image, M_DEVBUF);
        !           146:                        return (1);
        !           147:                }
        !           148:                SIMPLEQ_INSERT_TAIL(head, image, next);
        !           149:                addr += image_size;
        !           150:                rom_image++;
        !           151:        } while ((bus_space_read_1(romt, romh,
        !           152:            dataptr + CARDBUS_EXROM_DATA_INDICATOR) & 0x80) == 0);
        !           153:
        !           154:        return (0);
        !           155: }

CVSweb