Return to bthid.h CVS log | Up to [local] / sys / dev / bluetooth |
File: [local] / sys / dev / bluetooth / bthid.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:14:49 2008 UTC (16 years, 3 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: bthid.h,v 1.1 2007/07/27 16:52:24 gwk Exp $ */ /* $NetBSD: bthid.h,v 1.1 2006/06/19 15:44:45 gdamore Exp $ */ /*- * Copyright (c) 2006 Itronix Inc. * All rights reserved. * * Written by Iain Hibbert for Itronix Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Itronix Inc. may not be used to endorse * or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_BLUETOOTH_BTHID_H_ #define _DEV_BLUETOOTH_BTHID_H_ /* Transaction Types */ #define BTHID_HANDSHAKE 0x0 #define BTHID_CONTROL 0x1 #define BTHID_GET_REPORT 0x4 #define BTHID_SET_REPORT 0x5 #define BTHID_GET_PROTOCOL 0x6 #define BTHID_SET_PROTOCOL 0x7 #define BTHID_GET_IDLE 0x8 #define BTHID_SET_IDLE 0x9 #define BTHID_DATA 0xa #define BTHID_DATC 0xb #define BTHID_TYPE(b) (((b) & 0xf0) >> 4) /* HANDSHAKE Transaction Parameters */ #define BTHID_HANDSHAKE_SUCCESS 0x0 #define BTHID_HANDSHAKE_NOT_READY 0x1 #define BTHID_HANDSHAKE_INVALID_ID 0x2 #define BTHID_HANDSHAKE_UNSUPPORTED 0x3 #define BTHID_HANDSHAKE_INVALID_PARAM 0x4 #define BTHID_HANDSHAKE_UNKNOWN 0xe #define BTHID_HANDSHAKE_FATAL 0xf #define BTHID_HANDSHAKE_PARAM(b) ((b) & 0x0f) /* HID_CONTROL Transaction Parameters */ #define BTHID_CONTROL_NOP 0x0 #define BTHID_CONTROL_HARD_RESET 0x1 #define BTHID_CONTROL_SOFT_RESET 0x2 #define BTHID_CONTROL_SUSPEND 0x3 #define BTHID_CONTROL_RESUME 0x4 #define BTHID_CONTROL_UNPLUG 0x5 #define BTHID_CONTROL_PARAM(b) ((b) & 0x0f) /* GET_REPORT Transaction Parameters */ #define BTHID_CONTROL_SIZE 0x08 /* GET_PROTOCOL Transaction Parameters */ #define BTHID_PROTOCOL_REPORT 0 #define BTHID_PROTOCOL_BOOT 1 #define BTHID_PROTOCOL_PARAM(b) ((b) & 0x01) /* DATA, DATC Transaction Parameters */ #define BTHID_DATA_OTHER 0 #define BTHID_DATA_INPUT 1 #define BTHID_DATA_OUTPUT 2 #define BTHID_DATA_FEATURE 3 #define BTHID_DATA_PARAM(b) ((b) & 0x03) #endif /* _DEV_BLUETOOTH_BTHID_H_ */